1976 Cadillac Seville Engine Camshaft and Lifter Kit 8 Cyl 5.7L Edelbrock - Performer-Plus Camshaft Kit
P311-5F200DB 3712 New
Qty:
271.65
- CAMSHAFT KIT
- ; Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Designed For The Engine Swap Market~Idle Vacuum at 1000 RPM - 16 inch~May Require Longer Than Stock Pushrods~Not Legal For Use On Pollution Controlled Vehicles~Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads
- Performer-Plus Camshaft Kit
- Product Attributes:
-
- :
- 0.448
- 0.472
- 114
- 204
- 280
- 290
- Cast
- Hardened Steel
- Hydraulic
- No
- Performance
- Engine Make/Size: Olds 307-403
- Exh. Duration @ .050 in. (Deg): 214
- Exh. Duration Advertised (Deg): 290
- Exhaust Valve Lift: 0.472 In.
- Intake Duration @ 0.050 in.: 204 Degree
- Intake Duration Advertised: 280
- Intake Valve Lift: 0.448 In.
- Lifter Type: Hydraulic Flat Tappet
- RGL: Warning: This Product Can Expose You To Chromium, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 0-6750
- Usage: Street/performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
- :
- Edelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions.Camshaft Specifications:- Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees- Lift @ Valve Intake: .449"- Lift @ Valve Exhaust: .473"- Lobe Separation: 114 Degrees- Intake Centerline: 106 Degrees- Idle Vacuum @ 1000 RPM's: 16
Brand: Edelbrock