Finish Selecting Your Vehicle

Choose your Engine for your 1975 Oldsmobile Custom Cruiser

  • 8 Cyl 6.6L
  • 8 Cyl 7.5L

Shop By Brand

The Following brands are available based on your search.

  • Edelbrock
    Edelbrock
  • FAST
    FAST
  • Ford Racing
    Ford Racing
  • Holley
    Holley
  • Racing Head Service (RHS)
    Racing Head Service (RHS)
  • Weiand
    Weiand

Showing Products For 1975 Oldsmobile Custom Cruiser Engine Intake Manifold

Below are all the different brands and applications for 1975 Oldsmobile Custom Cruiser Engine Intake Manifold

Showing 1 - 10 of 170 Products for Engine Intake Manifold.

Refine Your Search

Edelbrock
1975 Oldsmobile Custom Cruiser Engine Intake Manifold 8 Cyl 6.6L Edelbrock - Performer Series Air-Gap Intake Manifold

P311-0C5ED71    2601  New

Qty:
In Stock & Ready to Ship
$429.79
Edelbrock Engine Intake Manifold
  • Satin Finish; 4 bbl Carb; Idle-5500 rpm; Non-EGR;Not Legal For Sale Or Use In California Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps
  • MANIFOLD; 1955-86 SB CHEVY 265-400; PERFORMER AIR GAP
  • Performer Series Air-Gap Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Based On Performer-Series With Unique Air Gap
    • Air Gap Causes Cool and Dense Mixture More Power
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • Fits Both Spread and Square Bore Carburetors
    • Also In Polished/PermaStar/EnduraShine Finish
  • Edelbrock part #2601 Performer Air-Gap intake manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys. This Performer Air-Gap intake manifold features an air-gap design for the ultimate street performance in the idle to 5500 rpm range. This design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. High-velocity runners deliver excellent throttle response throughout the power band. The great looks of the Performer Air-Gap along with the solid idle to 5500 rpm performance makes this an ideal choice for street rods and street machines. No provision for exhaust heated chokes or exhaust crossover. Fits spread-bore or square-bore carburetors. Will not fit under stock Corvette hood.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
1975 - Oldsmobile Custom Cruiser R V 8 Cyl 6.6L 400 -
Holley
1975 Oldsmobile Custom Cruiser Engine Intake Manifold - Upper 8 Cyl 6.6L Holley - Single Plane Intake Manifold Kit

P311-5328290    300-261  New

Qty:
In Stock & Ready to Ship
$414.58
Holley Engine Intake Manifold  Upper
  • Square Bore Carb Mounting Flange; 2500-7500 RPM; Front 4.18 in./Rear 5.28 in. Height; 1.92 in. H/1.20 in. Wi Port Size;Legal for Non-Emissions Controlled Vehicles Or For Race Use
  • Single Plane Intake Manifold Kit; Upper; Square Bore Carb Mounting Flange; 2500-7500 RPM; Front 4.18 in./Rear 5.28 in. Height; 1.92 in. H/1.20 in. Wi Port Size;
  • Single Plane Intake Manifold Kit
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Chevy Small Block V8
    • Front Height: 4.180 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Rear Height: 5.280 In.
    • RPM Range: 2500-7500
    • Usage: Racing
    • WARNING CA Proposition 65: No
  • Features:
    • Single Plane With Isolated Plenum
    • Square Bore Carburetor Mounting Flange
    • Isolated Water Cross-Over
    • Power Band 2500-7500 RPM
  • The new single plane intake manifold is designed to provide a broad RPM powerband for high-performance street/strip engine applications to a maximum engine speed of 7500 RPM. The carburetor-mounting pad is designed to accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These intake manifolds are designed to accept most stock hardware and accessory brackets, but offer performance features; like an updated plenum divider area, a 1 in. shorter height than the 300-25 manifold, and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. The 300-261 intake manifolds are designed for square-bore carburetor applications on 1957-86 262-400cid Small Block Chevrolet engines and SBC engines equipped with 1987-91 L98 aluminum Corvette cylinder heads (non-EGR applications). Also, these manifolds will work with any SBC engine equipped with aftermarket cylinder heads, as long as they have a standard port flange opening and mounting bolt locations.
Brand: Holley
Position: Upper
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1975 - Oldsmobile Custom Cruiser Upper V 8 Cyl 6.6L 400 -
Holley
1975 Oldsmobile Custom Cruiser Engine Intake Manifold - Upper 8 Cyl 6.6L Holley - Sniper EFI Intake Manifold

P311-3C2554D    825011  New

Qty:
In Stock & Ready to Ship
$662.64
Holley Engine Intake Manifold  Upper
  • Single Plane Carbureted; RPM Power Band 1800-7000; Silver w/Sniper Logo;Legal for Racing Use Only
  • Sniper EFI Intake Manifold; Upper; Single Plane Carbureted; RPM Power Band 1800-7000; Silver w/Sniper Logo;
  • Sniper EFI Intake Manifold
  • Product Attributes:
    • Construction: Fabricated
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Small Block Chevy
    • Flange: 4150
    • Front Height: 6.259 In.
    • Number of Carbs: One
    • Port Size: 1.900 In. X 1.150 In.
    • Rear Height: 6.259 In.
    • RPM Range: 1800-7000
    • Style: Carbureted
    • Usage:
      • Racing
      • Street/hi-performance
    • Vacuum Port Quantity: None
    • WARNING CA Proposition 65: No
  • Features:
    • Budget Friendly Fabricated Intake Manifolds
    • 1/8 in. Thick Aluminum More Durable Than Competitive Intakes
    • Available In 92mm And 120mm Bore Throttle Body Openings
    • 100% TIG Welded
    • Available For EFI And Carbureted Apps w/Custom Holley Sniper Logo
  • Holley is now offering budget friendly fabricated intake manifolds for LS, Small Block Chevy and Small Block Ford engines in carbureted and EFI versions!
Brand: Holley
Position: Upper
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1975 - Oldsmobile Custom Cruiser Upper V 8 Cyl 6.6L 400 -
Holley
1975 Oldsmobile Custom Cruiser Engine Intake Manifold - Upper 8 Cyl 6.6L Holley - Sniper EFI Intake Manifold

P311-41DBD94    825071  New

Qty:
In Stock & Ready to Ship
$651.95
Holley Engine Intake Manifold  Upper
  • Single Plane; Dual Quad Carbureted; RPM Power Band 1800-7000; Silver w/Sniper Logo;Legal for Racing Use Only
  • Sniper EFI Intake Manifold; Upper; Single Plane; Dual Quad Carbureted; RPM Power Band 1800-7000; Silver w/Sniper Logo;
  • Sniper EFI Intake Manifold
  • Product Attributes:
    • Construction: Fabricated
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Small Block Chevy
    • Flange/Bore Center to Center: 8.500 In.
    • Front Height: 6.771 In.
    • Number of Carbs: Two
    • Port Size: 1.900 In. X 1.150 In.
    • Rear Height: 6.771 In.
    • RPM Range: 1800-7000
    • Style: Carbureted
    • Usage:
      • Racing
      • Street/hi-performance
    • Vacuum Port Quantity: None
    • WARNING CA Proposition 65: No
  • Features:
    • Budget Friendly Fabricated Intake Manifolds
    • 1/8 in. Thick Aluminum More Durable Than Competitive Intakes
    • 100% TIG Welded
    • Available For EFI And Carbureted Apps w/Custom Holley Sniper Logo
  • Holley is now offering budget friendly fabricated intake manifolds for LS, Small Block Chevy and Small Block Ford engines in carbureted and EFI versions!
Brand: Holley
Position: Upper
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1975 - Oldsmobile Custom Cruiser Upper V 8 Cyl 6.6L 400 -
Holley
1975 Oldsmobile Custom Cruiser Engine Intake Manifold - Upper 8 Cyl 6.6L Holley - EFI Intake Manifold and Fuel Rail Kit

P311-3A4F4E0    300-260  New

Qty:
In Stock & Ready to Ship
$591.99
Holley Engine Intake Manifold  Upper
  • Single Plane; For Use w/4150 Style Throttle Body; 4.18 in. Front H/5.28 in. Rear H; 2500-7500 RPM Power Band; Satin;Legal for Non-Emissions Controlled Vehicles Or For Race Use
  • EFI Intake Manifold and Fuel Rail Kit; Upper; Single Plane; For Use w/4150 Style Throttle Body; 4.18 in. Front H/5.28 in. Rear H; 2500-7500 RPM Power Band; Satin;
  • EFI Intake Manifold and Fuel Rail Kit
  • Product Attributes:
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Chevy Small Block V8
    • Front Height: 4.180 In.
    • Fuel System Type: Efi
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Rear Height: 5.280 In.
    • RPM Range: 2500-7500
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Single Plane Design With Isolated Plenum
    • 4150 Square Bore Mounting Flange
    • 2500-7500 RPM Power Band
    • Front 4.18 in. / Rear 5.28 in. Height
    • 1.92 in. Height / 120 in. Width Port Size
    • Lower Throttle Body Mounting Height To Help w/Hood Clearance
    • Holley Laser Etched Logos On Black Coated Fuel Rails
    • Bracket Asst. Includes So You Can Install Injectors Of Your Choice
    • Fuel Injectors Are Not Included
    • Fuel Rail Designed For Max Throttle Lever Clearance
  • The new single plane EFI intake manifold is designed to provide a broad RPM powerband for high-performance street/strip engine applications to a maximum engine speed of 7500 RPM. The manifold is designed to work with 4150 Style Throttle body EFI systems like the Holley 4150 style flange Universal Throttle Bodies. These intake manifolds are designed to accept most stock hardware and accessory brackets, but offer performance features; like an updated plenum divider area, a 1 in. shorter overall height than most single plane manifolds, and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. The fuel injector bores have back-cut exits in the runners for better fuel atomization. This design points the injectors at an angle to match the intake runner airflow angle. The black coated fuel rails and rail bracket assortment are included with the manifold for any easy installation with the injectors that you choose to use for your combination. Fuel rail designed for maximum throttle lever clearance.(Injectors are not included)The 300-260 intake manifolds are designed 4150 style Throttle Body EFI applications on 1957-86 262-400cid Small Block Chevrolet engines and SBC engines equipped with 1987-91 L98 aluminum Corvette cylinder heads (non-EGR applications). Also, these manifolds will work with any SBC engine equipped with aftermarket cylinder heads, as long as they have a standard port flange opening and mounting bolt locations. Also Available: 20-86 Throttle Cable Bracket, 20-87 Kickdown Cable Bracket
Brand: Holley
Position: Upper
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1975 - Oldsmobile Custom Cruiser Upper V 8 Cyl 6.6L 400 -
Edelbrock
1975 Oldsmobile Custom Cruiser Engine Intake Manifold 8 Cyl 6.6L Edelbrock - RPM Air-Gap Intake Manifold

P311-387D993    75013  New

Qty:
In Stock & Ready to Ship
$565.34
Edelbrock Engine Intake Manifold
  • Black; 4 bbl Carb; 1500-6500rpm; Non-EGR; For Square-Bore Carbs; Street/Hi Perf. Use Only;CARB E.O. D-161-54 Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps
  • INTAKE MANIFOLD PERF RPM AIR GAP SB CHEV. W/BLK POWDER COAT FINISH
  • RPM Air-Gap Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • RPM Range: 1500-6500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Special NASCAR Edition To Show Your True Colors
    • Air Gap Causes Cool and Dense Mixture More Power
    • Durable And Distinctive Black Powder-Coat Finish
    • Special Badging
    • Deliver Superior Performance
    • Sets You Apart From The Crowd
    • Chevy Small Block 262-400
  • Edelbrock part #75013 RPM Air-Gap RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8's. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that's used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Edelbrock's Performer RPM gives you the ultimate in street high-performance. Accepts all 1976 and later alternator and A/C brackets for the street. No provision for exhaust- heated chokes and no exhaust crossover. Not for 1987 and later cast iron heads and will not fit under stock Corvette hood. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
1975 - Oldsmobile Custom Cruiser R V 8 Cyl 6.6L 400 -
Edelbrock
1975 Oldsmobile Custom Cruiser Engine Intake Manifold 8 Cyl 6.6L Edelbrock - RPM Air-Gap Intake Manifold

P311-3AE176F    7501  New

Qty:
In Stock & Ready to Ship
$397.17
Edelbrock Engine Intake Manifold
  • Cast Finish; 4 bbl Carb; 1500-6500rpm; Non-EGR; For Square-Bore Carbs; Street/Hi Perf. Use Only;CARB E.O. D-161-54 Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps
  • MANIFOLD; 1955-86 SB CHEVY; RPM AIR-GAP; NON-EGR
  • RPM Air-Gap Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • RPM Range: 1500-6500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Based on Performer RPM-Series with Unique Air Gap
    • Bright Silver Chrome Finish That Will Not Discolor
    • Designed for 1500 to 6500 RPM Street-Driven Power
    • Dual-Plane High-Rise Intake
    • For Square Bore Carburetors Only
  • Edelbrock part #7501 RPM Air-Gap #7501 intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8 applications. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that's used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
1975 - Oldsmobile Custom Cruiser R V 8 Cyl 6.6L 400 -
Edelbrock
1975 Oldsmobile Custom Cruiser Engine Intake Manifold 8 Cyl 6.6L Edelbrock - Performer RPM Intake Manifold

P311-3247F26    7101  New

Qty:
In Stock & Ready to Ship
$310.49
Edelbrock Engine Intake Manifold
  • Cast Finish; 4 bbl Carb; 1500-6500rpm; Non-EGR;CARB E.O. D-161-54 Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps
  • MANIFOLD; 1955-86 SB CHEVY; PERFORMER RPM
  • Performer RPM Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Chevy Small Block
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • RPM Range: 1500-6500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
  • Features:
    • Best for the Ultimate in Street High-Performance
    • 1958-1965 W-Series 348/409 Big Block Engines
    • Dual-Plane High-Rise Intake w/180 Deg. Firing Order
    • Produces Incredible Top-End Horsepower
    • Retains Good Throttle Response and Acceleration
    • Larger Plenum and Runners Maximizes Other Upgrades
    • Edelbrock Total Power Package Maximizes Gains
    • For Pre-Pollution Controlled Vehicles Or Engine Swaps
  • Edelbrock part #7101 Performer RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8's for maximum power and a broad torque curve for high- Performance'street/marine engines. Provides power like a single-plane and throttle response like a dual-plane. Has provisions to machine for an oil fill tube. No provisions for exhaust heated or stock-style choke. Accepts late-model water neck, air-conditioning, alternator and H.E.I. Will fit cast iron Chevrolet Bowtie heads, but will not fit 1987 and later cast iron heads. Intake manifolds will not fit under stock Corvette hood.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
1975 - Oldsmobile Custom Cruiser R V 8 Cyl 6.6L 400 -
Edelbrock
1975 Oldsmobile Custom Cruiser Engine Intake Manifold 8 Cyl 6.6L Edelbrock - Performer Series Intake Manifold

P311-4F655CA    3706  New

Qty:
In Stock & Ready to Ship
$436.92
Edelbrock Engine Intake Manifold
  • Idle-5500rpm; For 4 bbl Carbs; For Cast Iron Heads; EGR;Not Legal For Sale Or Use In California Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
  • MANIFOLD; 1987-95 SB CHEVY; PERFORMER; EGR; Q-JET
  • Performer Series Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Center Bolt (87-95)
    • Emission: With Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
    • Accepts Late-Model Choke
    • Water Neck
    • And HEI
    • Accepts A/C And Alternator
    • Accepts Exhaust Heated Chokes and Accepts EGR
  • Edelbrock part #3706 Performer EGR intake manifold is designed for street 262-400 c.i.d. Chevy V8's that have heads with canted center bolt holes, 1987-1995. This intake manifold accepts late-model water neck, air-conditioning, alternator, H.E.I. and have rear water crossovers. For 1987-95 stock aluminum heads use #2101. Will not fit Chevrolet Bowtie or LT1 heads.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
1975 - Oldsmobile Custom Cruiser R V 8 Cyl 6.6L 400 -
Edelbrock
1975 Oldsmobile Custom Cruiser Engine Intake Manifold 8 Cyl 6.6L Edelbrock - Performer Series Intake Manifold

P311-243EE34    3701  New

Qty:
In Stock & Ready to Ship
$381.92
Edelbrock Engine Intake Manifold
  • EGR; Idle-5500rpm; For 4 bbl Carbs; Street/Hi Perf. Use Only;Not Legal For Sale Or Use In California Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Or Race Use Or Engine Swaps
  • MANIFOLD; 1955-86 SB CHEVY; EGR; Q-JET; PERFORMER
  • Performer Series Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: With Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
    • Accepts Late-Model Choke
    • Water Neck
    • And HEI
    • Accepts A/C And Alternator
    • Accepts Exhaust Heated Chokes and Accepts EGR
  • Edelbrock part #3701 Performer EGR intake manifold is designed for street 1955-86 small-block Chevys. This manifold accepts late-model choke, water neck, air-conditioning, alternator and H.E.I. Has provisions to add oil fill tube. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
1975 - Oldsmobile Custom Cruiser R V 8 Cyl 6.6L 400 -

Showing 1 - 10 of 170 Products for Engine Intake Manifold.