1975 Chevrolet Caprice Clutch Release Bearing Transmission - Centerforce, FAG, Hays, Mcleod, Ram, SKF, Timken

1975 Chevrolet Caprice Clutch Release Bearing 8 Cyl 5.7L Timken

Part # P311-00FCBB6 Manu # 614018 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $34.87

Clutch Release Sealed Self Aligning Ball Bearing - Assembly
Meets or exceeds OE bearing performance requirements

Brand: Timken

Vehicle	Block	Engine	CID	CC
1975 - Chevrolet Caprice	V	8 Cyl 5.7L	350	-

1975 Chevrolet Caprice Clutch Release Bearing 8 Cyl 5.7L SKF

Part # P311-4693728 Manu # N1488 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $22.17

Clutch Release Bearing
Assembly
SKF Clutch Release Bearings are specifically designed for thrust load applications and are available for popular light-duty vehicles. SKF has multiple designs available for a variety of applications including external and hydraulic actuation. For more than 100 years, the world's engineers, technicians and mechanics have turned to SKF for the best possible solutions. Products manufactured by SKF are designed to the highest quality standards to ensure long life and safety.

Brand: SKF

Vehicle	Block	Engine	CID	CC
1975 - Chevrolet Caprice	V	8 Cyl 5.7L	350	-

1975 Chevrolet Caprice Clutch Release Bearing 8 Cyl 5.7L Hays - High Performance Throwout Bearing

Part # P311-3275CE6 Manu # 70-101 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $109.65

1.375 in. Diameter Shaft
High Performance Throwout Bearing; 1.375 in. Diameter Shaft;
High Performance Throwout Bearing
Product Attributes:
- Input Shaft Diameter: 1.375 In.
- Item Weight: 0.750 Lbs.
- WARNING CA Proposition 65: No
Features:
- 1.375 In Shaft Diameter
- 2.607 In Face Diameter
- Heat Resistant Moly-grease
- Blanchard Ground Face
- 90 Day Limited Warranty
Hays performance throwout bearings are designed to withstand high spring pressures and high RPM conditions common to performance clutches. They are heat treated and Blanchard ground to ensure trueness. The ball bearing race is packed with heat resistant moly-based grease for better lubrication and longer life. This throwout bearing has a 1.375 in shaft diameter and 2.607 in face diameter. This bearing will fit most GM applications. Other applications available.

Brand: Hays

Vehicle	Block	Engine	CID	CC
1975 - Chevrolet Caprice	V	8 Cyl 5.7L	350	-

1975 Chevrolet Caprice Clutch Release Bearing 8 Cyl 5.7L FAG

Part # P311-38ACFB2 Manu # MC0974 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 5000974100 , 614018 , 614083 , N3068SA

Qty:

In Stock & Ready to Ship

Best Price: $27.21

Clutch Release Bearing
11" Clutch with 26 Splines FAG Global Number 500 0974 100
Product Attributes:
- Bearing Inside Diameter:
  - 1.374
  - 34.9
- Bearing Outside Diameter:
  - 2.106
  - 53.492
- Length:
  - 0.661
  - 16.789
We develop and produce high-quality release bearings, roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Brand: FAG

Vehicle	Block	Engine	CID	CC
1975 - Chevrolet Caprice	V	8 Cyl 5.7L	350	-

1975 Chevrolet Caprice Clutch Release Bearing 8 Cyl 5.7L FAG

Part # P311-38ACFB2 Manu # MC0974 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $27.21

Clutch Release Bearing
with 10 Splines FAG Global Number 500 0974 100
Product Attributes:
- Bearing Inside Diameter:
  - 1.374
  - 34.9
- Bearing Outside Diameter:
  - 2.106
  - 53.492
- Length:
  - 0.661
  - 16.789
We develop and produce high-quality release bearings, roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Brand: FAG

Vehicle	Block	Engine	CID	CC
1975 - Chevrolet Caprice	V	8 Cyl 5.7L	350	-

1975 Chevrolet Caprice Clutch Release Bearing 8 Cyl 5.7L FAG

Part # P311-38ACFB2 Manu # MC0974 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $27.21

Clutch Release Bearing
with 10 Splines with 26 Splines 11" clutch FAG Global Number 500 0974 100
Product Attributes:
- Bearing Inside Diameter:
  - 1.374
  - 34.9
- Bearing Outside Diameter:
  - 2.106
  - 53.492
- Length:
  - 0.661
  - 16.789
We develop and produce high-quality release bearings, roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Brand: FAG

Vehicle	Block	Engine	CID	CC
1975 - Chevrolet Caprice	V	8 Cyl 5.7L	350	-

Clutch Release Bearing Centerforce

Part # P311-5D5AD7F Manu # N1430 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $43.42

Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- Throwout Bearing
Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Centerforce

Vehicle

Clutch Release Bearing Mcleod

Part # P311-588D47C Manu # 1350 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $439.34

1300 Series Hydraulic Bearing: GM: Tremec TKX: "A" 2.50"-2.99
1300 Series Hydraulic Bearing: GM: Tremec TKX: "A" Dimension: 2.50"-2.99
Product Attributes:
- "A" Dimension: 2.99in. Or Less
- Bearing Face ID: 1.59in.
- Bearing Face OD: 3.0in.
- Height 1 Spacer: 2.590in.
- Height 2 Spacers: 2.740
- Height 3 Spacers: 2.890in.
- Spline: 1 1/8in. X 26
- Stock Collar I.D.: 4.680in.
- Transmission: Tremec Tkx 5 Speed
Features:
- The 1300 Series Hydraulic Bearing. These units bolt in replacement of the factory bearing retianer when your "A" dimension is less than 3
Mcleod 1300 Series Hydraulic Throw-Out Bearings Replace Your Oem Bearing Retainer With The Finest Hard Anodized Billet Aluminum. These High-Quality, Bolt-On Hydraulic Throw-Out Bearings Are Extremely Durable And Are Packaged With High-Pressure Stainless Steel Braided Lines And Premium Elbow Swivel Fittings, Making Their Install Much Easier. These Assemblies Are Available For Several Applications And May Be Used To Eliminate The Need To Fabricate Complex Clutch Linkage When Swapping Transmissions. Mcleod 1300 Series Hydraulic Throw-Out Bearings Offer Extreme Durability And Performance For Your Street Or Strip Machine.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Mcleod

Vehicle

Clutch Release Bearing Hays

Part # P311-5CFBECA Manu # 70-104 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $116.86

High Performance Throwout Bearing
High Performance Throwout Bearing; Bearing Width 0.901 in.; 1.375 in. Shaft Diameter; High Performance GM;
Product Attributes:
- Input Shaft Diameter: 1.375 In.
- Item Weight: 1.130 Lbs.
- WARNING CA Proposition 65: No
Features:
- Heat-Treated Bearings
- Heat-Treated Blanchard-Ground
- Heat-Treated Collars
- Nylon Liner For Cool And Quiet Operation
- Bearing Retainer For Cool And Quiet Operation
- Developed To Withstand High Spring Pressure
Hays high performance throwout bearings have been developed to withstand the high-spring pressure and high RPM operation common to racing clutches. Each bearing face is heat-treated and blanchard-ground to ensure trueness. The collars are heat-treated for strength and machined to close tolerances for secure bearing fork attachment. The ball-bearing race is packed with heat-resistant moly-based grease for better lubrication and longer life. A nylon liner and bearing retainer is also featured for cooler and quieter operation.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Hays

Vehicle

Clutch Release Bearing Hays

Part # P311-17C0D19 Manu # 82-103 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $446.30

Hays Hydraulic Release Bearing Kit
Hays Hydraulic Release Bearing Kit; For Ford Tremec/TKO500/TKO600 5 Speed;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Easy Way To Add Hydraulic Clutch Actuation
- Works w/Single Or Dual Clutches
- Incl.Bearing Assembly/Hardware/Shims/Feed Line
Hays offers upgraded release bearing kits for your favorite factory hydraulic equipped car along with applications to convert from a mechanical-style to hydraulic-style release bearing. Typically, this hydraulic conversion offers easier pedal effort over a mechanical release bearing. Our bearing kits offer full adjustability, providing an easy setup with most single or dual disc clutches along with reduced pedal effort. Hays release bearings are a floating design and feature large O-rings and PTFE backup rings in the grooves to help eliminate leakage and offer a long service life. A snap ring on the front of the piston prevents over travel and keeps from pushing the bearing off the sleeve. The sealed bearing snaps in place and is easily serviceable. Our release bearing kits include bearing assembly, bearing retainer (where required), mounting hardware, adjustment shims, and -3AN bleed line.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Hays

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 1975 Chevrolet Caprice Clutch Release Bearing