1974 Mercedes-Benz 450SE Ignition Control Module Ignition - Accel, Holley, MSD, Mallory, Pertronix, Proform, Programa, Standard Ignition

Ignition Control Module MSD

Part # P311-5159509 Manu # 81473 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,566.33

Pro Mag Electronic Points Box
Pro Mag Electronic Points Box; 44 Amp; Rev Limiter; Black;
Product Attributes:
- RPM: 12500
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Controls The Energy
- Releases The Power Of The Generator To The Coil
- Cast Aluminum Housing
MSD products are the finest ignition components you can install on your car whether it's a daily driver, dirt tracker, 4-wheel drive, a seven second Pro Stock car or Big Foot. MSD is your exclusive performance ignition company and we thank you for your interest and support.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-1BBFBA2 Manu # 8147 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,566.33

Pro Mag Electronic Points Box
Pro Mag Electronic Points Box; 44 Amp; Rev Limiter; Red;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Controls The Energy
- Releases The Power Of The Generator To The Coil
- Cast Aluminum Housing
MSD products are the finest ignition components you can install on your car whether it's a daily driver, dirt tracker, 4-wheel drive, a seven second Pro Stock car or Big Foot. MSD is your exclusive performance ignition company and we thank you for your interest and support.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-18C9D02 Manu # 81453 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,302.41

Pro Mag Electronic Points Box
Pro Mag Electronic Points Box; 44 Amp; Black;
Product Attributes:
- RPM: 12500
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Controls The Energy
- Releases The Power Of The Generator To The Coil
- Cast Aluminum Housing
MSD products are the finest ignition components you can install on your car whether it's a daily driver, dirt tracker, 4-wheel drive, a seven second Pro Stock car or Big Foot. MSD is your exclusive performance ignition company and we thank you for your interest and support.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-3C34984 Manu # 7760 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $382.30

Power Grid Ignition System™ Timing Control
Power Grid Ignition System™ Timing Control; For Use w/MSD Power Grid System; Programmable; 3 Stage Delay Timer;
Product Attributes:
- RPM: 12500
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- For Use w/Power Grid
This timer will activate up to three individual outputs based on time. When the clutch/transbrake is released the Power Grid will start the timers through the CAN Connection.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-287EDBD Manu # 2910-2 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,609.30

MSD Ignition Controller
MSD Ignition Controller; Flows 865 CFM; 1-3/4 in. Throttle Plates; Natural Finish; Includes Throttle Body/Power Module/Harnesses/Handheld Programmer;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- For 4-barrel Carburetors With 4150-style Square Bore Flange
- Flows 865 CFM and features 1 3/4 in. Throttle Plates
- New Booster Design Offers Superior Fuel Atomization
- ECU Is 100 Percent Incorporated Into The Throttle Body
- New And Improved Calibration Wizard
- Tuneability For Boosted Applications Up To 21.5 PSI
- Improved Built In Nitrous Control Supports Wet/Dry Nitrous
Redesigned from the ground up, the Atomic 2 EFI system now features an 865 CFM throttle body with integrated ECU, full color touch screen, simple 4-wire hookup, and several easy-to-use new features!

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-5217012 Manu # 8001 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,201.56

PRO 600 Ignition Box
PRO 600 Ignition Box; Adjust Output energy to 680 mJ; Compatible w/8/6/4 Cyl. Engines; Single Channel;
Product Attributes:
- RPM: 10000
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Adjustable Output Energy Up To 680 Millijoules
- Compatible With 8/6/4 Cylinder Engines
- Spark Current Sense And Recording For Each Firing
- Spark Duration Of Greater Than 250 Microseconds
- Rated For Continuous Operation At An Output Of 600 mJ
- Operates Between 12- 28V
- Starting And Running Down To Six Volts
- Programmable Trigger Edge
- Reverse Battery Protection
- Internally Protected From Damage
- Diagnostic Led Detects The Presence Of Faults
- On-The-Fly Power Output Selection Wire
The Single Channel Pro 600 Ignition is engineered and built for the most demanding racing applications and is the HOTTEST single channel ignition box for use with the MSD Power Grid. This ignition is capable of running continuously at an energy level of up to 600 mJ inducing more than 250 microseconds of spark duration. With a Power Boost wire, the ignition output can be changed on the fly between programmable lower energy (325 mJ by default) to its maximum energy output of 600 mJ. The lower energy setting reduces the battery power requirements and lessens the stress on the secondary ignition components (distributor cap, rotor, spark plug wires and spark plugs).The ignitions Alternating-Current (AC) operation with an internal coil-coupler considerably increases spark-gap energy and duration over Direct-Current (DC) Ignitions. This increased efficiency translates to more energy at the spark gap combined with longer spark duration and cooler operating temperature of the ignition coil. To further improve efficiency, unused spark energy is recycled back to the ignition capacitor reducing the power drawn from the battery. The Single Channel Pro 600 Ignition provides up to 20 Percent additional spark gap energy and a 40 Percent increase in spark duration over other 600 mJ ignitions available in the market. Additionally, the ignitions high-efficiency design reduces power demand from the battery, which in turn reduces loads on the wires and connectors. As the Single Channel Pro 600 Ignition is designed for the most challenging applications, it is also capable of continuous full-power operation. The Single Channel Pro 600 Ignition is designed to work with the MSD Power-Grid and can provide firing-by-firing spark current data acquisition. A Diagnostic LED detects the presence of faults - such as an Open Coil Primary, Shorted Coil Primary, Reversed Primary Connections, or Open Coil Secondary.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-0307556 Manu # 62023 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $338.31

Ultra 6A Ignition Box
Ultra 6A Ignition Box; Black; Compatible w/4/6/8 Cylinder Engines w/Distributor; 1.1 Amp Per 1000RPM; 520-540 Volts;
Product Attributes:
- RPM: 15000
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Plug-N-Play
- New Processor And Board Design Provide A Highly Efficient Ignition
- 60 Percent Smaller And 50 Percent Lighter Than The Msd Digital 6A
- Powerful Capacitive Discharge Of Multiple Sparks Improves Performance
- Consistently High Spark Energy Of 135Mj To 150Mj For Every Firing - From Idle To Redline Rpm
- Operates On Most 7 To 28-Volt Electrical Systems
- Connects To Points And Magnetic Pickups
- Fully Protected Against An Open Coil - Shorted Coil And Open Load
- Quickens Throttle Response And Improves Starting
- Tach Output To Drive An External Tachometer
The Ultra 6A Series continues to use a high speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI).The Ultra 6A Series feature a capacitive discharge ignition design. The majority of stock ignition systems are inductive ignitions. In an inductive ignition, the coil must store and step up the voltage to maximum strength in between each firing. At higher rpm, since there is less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy which results in a loss of power or top end miss.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module MSD

Part # P311-1FC27D5 Manu # 6202 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $348.26

Ultra 6A Ignition Box
Ultra 6A Ignition Box; Red; Compatible w/4/6/8 Cylinder Engines w/Distributor; 1.1 Amp Per 1000RPM; 520-540 Volts;
Product Attributes:
- RPM: 15000
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Plug-N-Play
- New Processor And Board Design Provide A Highly Efficient Ignition
- 60 Percent Smaller And 50 Percent Lighter Than The Msd Digital 6A
- Powerful Capacitive Discharge Of Multiple Sparks Improves Performance
- Consistently High Spark Energy Of 135Mj To 150Mj For Every Firing - From Idle To Redline Rpm
- Operates On Most 7 To 28-Volt Electrical Systems
- Connects To Points And Magnetic Pickups
- Fully Protected Against An Open Coil - Shorted Coil And Open Load
- Quickens Throttle Response And Improves Starting
- Tach Output To Drive An External Tachometer
The Ultra 6A Series continues to use a high speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI).The Ultra 6A Series feature a capacitive discharge ignition design. The majority of stock ignition systems are inductive ignitions. In an inductive ignition, the coil must store and step up the voltage to maximum strength in between each firing. At higher rpm, since there is less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy which results in a loss of power or top end miss.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Control Module Standard Ignition

Part # P311-2238A1A Manu # LX-1064 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 18-5764 , 55-2128 , 582261 , 586696 , 6H1462 , CBC1501 , CBE2114 , MC199 , TP564

Qty:

In Stock & Ready to Ship

Best Price: $142.60

Ignition Control Module
Product Attributes:
- Connector Gender: Female
- Connector Quantity: 4
- Terminal Gender: Male
- Terminal Quantity: 5
- Terminal Type: Pins
Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment. Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module. Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather. High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability. Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C. With industry leading expertise in electronic ignition, when original equipment fails our products are designed to fix the inherent failure issues. As a global manufacturer of original equipment ignition products, we maintain complete quality control throughout the manufacturing process from componentry to finished product.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Standard Ignition

Vehicle

Ignition Control Module Standard Ignition

Part # P311-322C02D Manu # LX-1070 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 18-5770 , 55-2122 , 584027 , 584028 , 6H1456 , CBC1518 , CBE2120 , MC193 , TP570

Qty:

In Stock & Ready to Ship

Best Price: $172.21

Ignition Control Module
Product Attributes:
- Connector Gender: Female
- Terminal Gender: Male
- Terminal Quantity: 5
- Terminal Type: Blade
Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment. Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module. Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather. High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability. Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C. With industry leading expertise in electronic ignition, when original equipment fails our products are designed to fix the inherent failure issues. As a global manufacturer of original equipment ignition products, we maintain complete quality control throughout the manufacturing process from componentry to finished product.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Standard Ignition

Vehicle

Shop By Brand

Showing Products For 1974 Mercedes-Benz 450SE Ignition Control Module