1974 Chrysler Newport Engine Intake Manifold Engine - Edelbrock, FAST, Ford Performance, Holley, Racing Head Service (RHS), Weiand

Engine Intake Manifold Edelbrock

Part # P311-061DF34 Manu # 7116 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $416.14

Performer RPM Small Block Chevy Vortec Intake Manifold
Edelbrock Performer RPM Vortec Intake Manifold For Chevrolet 262-400 Small-Block V8
Product Attributes:
- Basic Operating RPM Range: 1500-6500
- Center Maximum Height: 4.720
- CNC Ported: No
- Cylinder Head Type: Gm Vortec/edelbrock E-tec
- EGR Port: No
- Emission: With Egr
- Engine Make/Size: Chevy Small Block (262-400)
- Flange Type: 4150
- Front Maximum Height: 4.200
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 5.250
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 1500-6500
- Single Or Dual Plane Type: Dual
- Usage: Street/hi-performance
- Vehicle Model: Chevrolet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Best for the Ultimate in Street High-Performance
- Bright Silver Chrome Finish That Will Not Discolor
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
- For 1996+ GM Vortec or Edelbrock E-Tech Heads
- Accepts Square Bore Carburetors Only
Edelbrock part #7116 Performer RPM Vortec intake manifold is Based on the powerful Edelbrock #7101, this single four-barrel intake is designed for the street rod, marine and engine swap market utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. Manifold accepts square-bore carbs only. For street and marine engines operating from 1500-6500 RPM, see the Performer Vortec manifold or Performer Vortec EPS. Will not fit under stock Corvette hood.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-59479B5 Manu # 7118 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,047.07

Performer RPM Small Block Chevy LS1 Intake Manifold
Edelbrock Performer RPM LS Cathedral Port Intake Manifold with Timing Control Module for Gen III and Gen IV LS Engines
Product Attributes:
- Basic Operating RPM Range: 1500-6500
- Center Maximum Height: 4.950
- CNC Ported: No
- Cylinder Head Type: Standard
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block Ls1
- Flange Type: 4150
- Front Maximum Height: 4.500
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 5.400
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 1500-6500
- Single Or Dual Plane Type: Dual
- Usage: Street/hi-performance
- Vehicle Model: Chevrolet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Converts LS1
- LS6
- Gen III Engine to Carburetor
- Includes Wiring Harness and Timing Control Module
- Contains 6 Timing Curves and Works with OE Sensors
- For 1500 to 6500 RPM Street Performance
- Includes Brackets for 700R-4
- 200R-4
- Turbo 350
- Excellent for Engine Retro-Fit Applications
- Also Available In Polished - See PN[71181]
Edelbrock part #7118 Performer RPM Cathedral Port LS intake manifold with timing control module is an easy solution for those looking to swap a LS engine into their early carbureted vehicle. It allows the use of a carburetor on these originally computer-controlled engines, offering maximum power and a broad torque curve from 1500 to 6500 rpm. The 7118 intake manifold kit comes with a wiring harness and electronic Timing Control Module made by MSD. The ignition module has an internal MAP sensor, and works with either 24x (Gen II) or 58x (Gen IV) OE sensors to fire the Coil-on-Plug ignition system. A rotary dial offers a choice of six timing curves. More extensive programming of rev limits, nitrous retard etc. available via laptop connection. A special throttle and transmission cable bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included, making the LS1 engine an easy retro-fit into any muscle car or street rod application. Uses GM individual o-ring gaskets PN 12533587. Manifold hold down bolts included. For LS rectangle port (LS3) applications see PN 71196.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-4F919D7 Manu # 71197 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $444.76

Performer RPM Small Block Chevy LS3 Intake Manifold Only
Edelbrock Performer RPM LS3 Intake Manifold Without Timing Control Module for Gen IV LS
Product Attributes:
- Basic Operating RPM Range: 1500-6500
- Center Maximum Height: 5.110
- CNC Ported: No
- Cylinder Head Type: Ls3/l92
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Chevy Ls3/l92
- Flange Type: 4150
- Front Maximum Height: 4.660
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 5.560
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 1500-6500
- Single Or Dual Plane Type: Dual
- Usage: Street/hi-performance
- Vehicle Model: Chevrolet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Offers Maximum Power And Broad Torque Curve
- Works With OE Sensors
Edelbrock part #71197 Performer RPM LS3 intake manifold is designed for Gen IV engines with LS3, L92 and L76 rectangular port cylinder heads. The Performer RPM LS3 manifold is ideal for anybody looking to build a carbureted LS3 or LS2 engine with an operating range between 1,500 - 6,500 rpm. It allows the use of a carburetor on these originally computer-controlled engines, offering maximum power and a broad torque curve. It features a high-rise dual-plane design combined with a plenum that has been optimized for square-bore carburetors. Performer RPM LS3 includes a provision for mounting an MSD Ignition Timing Control Module #6012 (sold separately), including passages for routing the coil wire harness, for a clean look. A special throttle and trans bracket that works with 700R-4, 200-4R and Turbo 350 transmissions is also included, making this an easy retro-fit into any muscle car, street rod or marine application.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-285C0A2 Manu # 7129 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $559.78

Performer RPM Small Block Ford E-Boss 302 Intake Manifold
Edelbrock Performer RPM E-Boss 302 Intake Manifold for 302 Ford Small Block with Cleveland Heads
Product Attributes:
- Basic Operating RPM Range: 1500-6500
- Center Maximum Height: 5.060
- CNC Ported: No
- Cylinder Head Type: Standard
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Ford Small Block 302
- Flange Type: 4150
- Front Maximum Height: 4.420
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 5.700
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 1500-6500
- Single Or Dual Plane Type: Dual
- Usage: Street/hi-performance
- Vehicle Model: Ford
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Build A Mock Boss 302 Engine
- For High Performance Street/Competition
- Dual-Plane Design 1500-6500 RPM Range
- Cleveland Port Layout And Intake Bolt Hole Pattern
With the Edelbrock part #7129 Performer RPM E-Boss 302 intake manifold, you can build a mock Boss engine by using a standard 302 block and Edelbrock Performer RPM Cleveland cylinder heads #61699. For high-performance's street and competition, our dual-plane design makes outstanding power from 1500 to 6500 rpm. The Cleveland port layout and intake bolt hole pattern fit both 2V and 4V heads. Features include 8.2" deck height, Windsor end rails, water neck and distributor clearance plus front and rear water bosses. Match with an Edelbrock Performer or Thunder Series AVS carburetor. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-1657041 Manu # 28097 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $661.77

Super Victor Intake Manifold for Gen III LS1/LS2
Edelbrock Super Victor LS1/LS2 Carbureted Intake Manifold for Chevrolet LS Gen III
Product Attributes:
- Basic Operating RPM Range: 3500-8000
- Center Maximum Height: 6.070
- CNC Ported: No
- Cylinder Head Type: Standard
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block Ls1
- Flange Type: 4150
- Front Maximum Height: 6.070
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 6.070
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 3500-8000
- Single Or Dual Plane Type: Single
- Usage: Racing
- Vehicle Model: Chevrolet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Offers Greater Air Flow Potential
- Bigger Power Gains
- Accepted By NASCAR For Grand National Series
- For Use With Carburetor
Edelbrock part #28097 Super Victor LS1 intake manifold offers greater air flow potential for even bigger power gains, this manifold has been accepted by NASCAR for use in the Grand National West/Grand National East series. The carb mount pad is 1.12" taller than the Victor Jr. LS1, and the port exits have been increased to 1.08" x 2.74". Edelbrock offers the optional LS1 Timing Control Module #91238 to drive the stock LS1 Coil-on-Plug ignition system. LS2 applications require MSD's #6012 LS2 ignition controller (available through MSD Performance).

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-52E1B15 Manu # 2814 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $589.25

Super Victor Vortec Intake Manifold for Small-Block with GM Bowtie Vortec Heads
Edelbrock Super Victor Vortec Bowtie Intake Manifold for Small-Block Chevrolet 350 is Designed for used on GM Cast Iron Bowtie Vortec Cylinder Heads Only. Accepts a 4150-Style Square-Bore Carburetor. Non-EGR.
Product Attributes:
- Basic Operating RPM Range: 4000-8000
- Center Maximum Height: 6.770
- CNC Ported: No
- Cylinder Head Type: Gm Vortec/edelbrock E-tec
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block (262-400)
- Flange Type: 4150
- Front Maximum Height: 6.770
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 6.770
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 4000-8000
- Single Or Dual Plane Type: Single
- Usage: Racing
- Vehicle Model: Chevrolet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For 4000 to 8000 RPM High-Performance Engines
- Developed for Competition High RPM and Large CID
- Closely Match Port Shape/Location Of Heads
- Best Choice For Classes That Prohibit Modification
- Original 6-Bolt Pattern
- 1 in. Of Additional Carb Pad Height
Edelbrock part #2814 Super Victor Vortec Bowtie intake manifold is designed specifically for use with GM cast-iron Vortec Bowtie cylinder heads #25534351 (185cc) and #25534371 (215cc). It features raised runners that closely match the port shape and location of these heads and is the best choice for racing classes that prohibit modification to the manifold. It features the original 6-bolt pattern and 7/8" inch of additional carb pad height (compared to previous raised-runner manifolds such as #2926).

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-5852CDB Manu # 2815 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $588.58

Super Victor Intake Manifold for Small-Block Chrysler LA Engines
Edelbrock Super Victor Intake Manifold for 318-340-360 Small-Block Chrysler "LA" Engines is Designed for high-performance's street & Competition Applications. Accepts a 4150-Style Square-Bore Carburetor. Non-EGR.
Product Attributes:
- Basic Operating RPM Range: 3500-8000
- Center Maximum Height: 6.300
- CNC Ported: No
- Cylinder Head Type: Mopar 340/360
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Mopar 318-360
- Flange Type: 4150
- Front Maximum Height: 6.300
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 6.300
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 3500-8000
- Single Or Dual Plane Type: Single
- Usage: Racing
- Vehicle Model: Chrysler
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For 3500 to 8000 RPM High-Performance Engines
- Extended Constant Cross-Section of Runners
- Single-Plane Air-Gap Style Manifold
- Substantial Mid Range Gains
Edelbrock part #2815 Super Victor intake manifold is designed for small-block Chrysler engines with conventional rectangular port heads like Edelbrock Performer RPM cylinder heads or Victor heads, this single-plane Air-Gap style manifold operates from 3500 to 8000 rpm. Testing has shown substantial mid-range gains over the current designs. The runners have been cast in such a way to insure enough metal thickness to allow for gasket matching and porting. Accepts 1975 and earlier waterneck only.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-3E4BB73 Manu # 28215 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $926.17

Super Victor Small Block Chevy LS3 EFI 4500 Intake Manifold
Edelbrock Super Victor LS3 EFI 4500 Style Intake Manifold for Gen IV LS3
Product Attributes:
- Basic Operating RPM Range: 3500-7500
- Center Maximum Height: 7.670
- CNC Ported: No
- Cylinder Head Type: Ls3/l92
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Chevy Ls3
- Flange Type: 4500
- Front Maximum Height: 7.670
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 7.670
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 3500-7500
- Single Or Dual Plane Type: Single
- Usage: Racing
- Vehicle Model: Chevrolet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For 3500 to 7500 RPM High-Performance Engines
- Ideal For Drag Racing Or Marine Applications
- Use For Any Application Requiring Maximum Power
Edelbrock part #28215 Super Victor LS3 EFI intake manifold is designed for Gen IV LS engines equipped with LS3 cylinder heads. This new Super Victor intake manifold is ideal for anyone building a 700+ hp 4500 style EFI large displacement racing engine operating between 3,500 - 7,500 rpm. This Super Victor intake manifold is designed with 24% larger runners than our Victor Jr. #28455 along with a larger 4500 style plenum. The large plenum makes this intake manifold ideal for nitrous and forced induction applications. The manifold also features tapered runners for increased flow at high rpm. The Super Victor 4500 series manifolds can accommodate bores up 2.25". This Super Victor LS3 EFI intake manifold includes machined fuel injector bosses. A carburetor mounted style throttle bracket is recommended.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-043877B Manu # 2826 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $569.08

Super Victor Small-Block Chevy LS3 4150 Carburetor Intake manifold
Edelbrock Super Victor LS3 Carbureted Intake Manifold for Small-Block Chevrolet Gen IV Engines with LS3, L92, & L76 Rectangle Port Cylinder Heads. Accepts 4150-Series Carburetor. Non-EGR.
Product Attributes:
- Basic Operating RPM Range: 3500-7500
- Center Maximum Height: 7.670
- CNC Ported: No
- Cylinder Head Type: Ls3/l92
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Chevy Ls3/l92
- Flange Type: 4150
- Front Maximum Height: 7.670
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 7.670
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 3500-7500
- Single Or Dual Plane Type: Single
- Usage: Racing
- Vehicle Model: Chevrolet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For 3500 to 7500 RPM High-Performance Engines
- Ideal For Drag Racing Or Marine Applications
- Use For Any Application Requiring Maximum Power
Edelbrock part #2826 Super Victor LS3 carbureted intake manifold is designed for Gen IV LS engines equipped with LS3 cylinder heads. This new Super Victor intake manifold is ideal for anyone building a 700+ hp 4150 series carbureted large displacement racing engine operating between 3,500 - 7,500 rpm. This new Super Victor intake manifold is designed with 24% larger runners than our Victor Jr. #28457 along with a larger 4500 style plenum. The large plenum makes this intake manifold ideal for nitrous and forced induction applications. This intake manifold also features tapered runners for increased flow at high rpm. A carburetor mounted style throttle bracket is recommended.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-1EBA267 Manu # 28265 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $712.50

EFI Super Vic Small Block Chevy LS3 4150 Intake Manifold
Edelbrock EFI Super Vic LS3 4150 Intake Manifold GM LS Engines
Product Attributes:
- Basic Operating RPM Range: 3500-7500
- Center Maximum Height: 7.670
- CNC Ported: No
- Cylinder Head Type: Ls3/l92
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Chevy Ls3/l92
- Flange Type: 4150
- Front Maximum Height: 7.670
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 7.670
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 3500-7500
- Single Or Dual Plane Type: Single
- Usage: Racing
- Vehicle Model: Chevrolet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For 3500 to 7500 RPM High-Performance Engines
- Ideal For Drag Racing Or Marine Applications
- Use For Any Application Requiring Maximum Power
Edelbrock part #28265 Super Victor LS3 EFI intake manifold is designed for Gen IV LS engines equipped with LS3 cylinder heads. This new Super Victor intake manifold is ideal for anyone building a 700+ hp 4150 series EFI large displacement racing engine operating between 3,500 - 7,500 rpm. The large plenum makes this intake manifold ideal for nitrous and forced induction applications. This EFI intake manifold also features tapered runners for increased flow at high rpm. A carburetor mounted style throttle bracket is recommended.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 1974 Chrysler Newport Engine Intake Manifold