Choose Vehicle Year

  1. Previous
  2. Home
  3. 1974
  4. Chrysler
  5. Newport
  6. Engine
  7. Engine Intake Manifold

Finish Selecting Your Vehicle

Choose your Engine for your 1974 Chrysler Newport

  • 8 Cyl 5.9L
  • 8 Cyl 6.6L
  • 8 Cyl 7.2L

Shop By Brand

The Following brands are available based on your search.

  • Edelbrock
    Edelbrock
  • FAST
    FAST
  • Ford Performance
    Ford Performance
  • Holley
    Holley
  • Racing Head Service (RHS)
    Racing Head Service (RHS)
  • Weiand
    Weiand

Showing Products For 1974 Chrysler Newport Engine Intake Manifold

Below are all the different brands and applications for 1974 Chrysler Newport Engine Intake Manifold

Showing 41 - 50 of 154 Products for Engine Intake Manifold.

Refine Your Search

Holley
Engine Intake Manifold Holley

P311-53FD3EE    300-291  New

Qty:
In Stock & Ready to Ship
$642.02
Holley Engine Intake Manifold
  • Race Intake Manifold
  • Race Intake Manifold; Fits w/GM LS III/IV engines w/LS3/L92 Heads; 7.25 in. Front H; 7.25 Rear H; Split Single Plane; Satin Finish; Silver; Cast Construction;
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Ls3/l92
    • Engine Make/Size: Gm Ls3/l92
    • Front Height: 7.250 In.
    • Fuel System Type: Carb
    • Manifold Type: Single Plane
    • Rear Height: 7.250 In.
    • RPM Range: 2500-7000
    • Usage: Racing
    • WARNING CA Proposition 65: No
  • Features:
    • Maximum Performance Race Design With Hood Clearance Consideration
    • Lighter Than Other Split Race Intakes
    • Split Feature Making Porting Efforts Easy
    • 33 To 50 Percent The Price Of Other Split Race Intakes
    • Captured O Ring Seals At Head Ports And Split
    • Black Finish
  • The new Holley Single-Plane Race intake manifold were designed with performance in mind. They feature a race bred, two piece split feature that was previously only found on the most expensive race intakes. The manifold will fit GM LS Gen III engines with LS3/L92 heads and are intended for 4150 style square bore flanged carburetors or throttle body EFI.The LS Race single-plane intake manifold was designed for hi-performance/racing engine applications, 5.3 to 6.2+ liter displacement, and maximum engine speeds of 6000-7000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the RPM spectrum while providing maximum performance up to 7000 rpm.The Holley LS Race manifold incorporates a split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap. With shoulder bolt locators and O-ring seal, reassembly is simple and precise. Technical Data‚· A-B Height - 7.25 in. (0° carb flange angle)ï‚· Port Size- 2.59 in. Height x 1.28 in. Wide‚· Carburetor Flange - Standard 4150 for up to 1-3/4 in. diameter throttle boresï‚· As-Cast Runner Cross-Sectional Area - 4.5 in² at the runner entry tapered to 3.2 in² at the flange exit

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-4165663    300-272BK  New

Qty:
In Stock & Ready to Ship
$1,244.04
Holley Engine Intake Manifold
  • Holley EFI Hi-Ram Intake Manifold
  • Holley EFI Hi-Ram Intake Manifold; Fits w/8.2 in. Deck SB Ford w/95 mm LS Throttle Body Flange Top; 1500-7000 RPM Power Band; Cast Aluminum; Satin Finish;
  • Product Attributes:
    • Cylinder Head Type: Ford Small Block
    • Engine Make/Size: Ford 289-302
    • RPM Range: 1500-7000
    • Usage: Racing
    • WARNING CA Proposition 65: No
  • Features:
    • Plenum Top Gasket Type - 3/32 in. Round O-ring Cord
    • Manifold Is Designed For A 8.2 In. SBF Deck Height
  • The EFI Hi-Ram manifold line has a new addition for the 8.2 in. SBF Ford application. This manifold comes with a 95MM LS throttle body flange top. The runner length and tapered cross section design will perform well for a wide range of engine combinations. The engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! Manifold is designed for a 8.2 in. deck height. Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations EFI fuel rails are machined for -8AN O-ring Fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. Cast aluminum construction.*** A low profile distributor will be needed when using this manifold. We have a Sniper Hyperspark version #565-322 and a Holley EFI Dual Sync #565-211 available.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-02EAC43    300-621BK  New

Qty:
In Stock & Ready to Ship
$973.11
Holley Engine Intake Manifold
  • Holley EFI Modular Lo-Ram Intake Manifold
  • Holley EFI Modular Lo-Ram Intake Manifold; Upper; Front Feed Cast Black; 6.86 in. Height w/Throttle Body Adapter; For Use w/GM/LS1/LS2/LS6;
  • Product Attributes:
    • Engine Make/Size: Gm Ls1/ls2/ls6
    • RPM Range: 7000-8000
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: No
  • Features:
    • For Forced Induction Engines With Peak Power At 7000-8000 Rpm
    • Modular Design Allowing The Use Of Front-Feed Plenum Entry
    • Custom Inlet Duct And Throttle Body Placement
    • Fit Under A Stock Or Mildly Modified Hood In The Front-Feed
    • Clears 4Th Gen Camaro/C5 Corvette Cowls/Hoods w/o Modification
    • High Volume Fuel Rails And Mounting Hardware Included
  • The Holley LS1/2/6 Ultra Lo-Ram intake manifold kits are designed for GM LS Gen III and IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and the 105 mm throttle body part number 112-581 or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The 300-621 Ultra Lo-Ram front-feed plenum entry was configured to provide a very low profile modular intake manifold suitable for turbocharged or centrifugally supercharged engines. The fuel rail kits come with two sets of brackets. A set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-49C10FD    300-717BK  New

Qty:
In Stock & Ready to Ship
$1,048.97
Holley Engine Intake Manifold
  • Holley EFI Ultra Lo-Ram Intake Manifold Kit
  • Holley EFI Ultra Lo-Ram Intake Manifold Kit; Fits GM Gen V Hemi Engines w/LT Cylinder Heads; w/Burst Plate Flange Plenum Top; Black Powder Coat Finish;
  • Product Attributes:
    • Usage: Racing
    • WARNING CA Proposition 65: No
  • Features:
    • Designed For GM Gen V Engines Equipped With GM LT Type Cylinder Heads
    • Engineered For Forced Induction Supercharged Or Turbocharged Engine Applications
    • 0.97 in. Taller Than A Factory LT1 Manifold
    • Modular And Front Entry Plenum Flange Allows Design And Fabrication Of Special Throttle Body Adapters
    • Clears C7 Corvette Cowls And Hoods Without Modification
    • Kits With Port Injection Provide High Volume Fuel Rails With 3/4-16 O-ring Ports 8 AN
  • The Holley GM Gen V LT Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application. The front entry throttle body flange has a 105mm opening to work with throttle body part number 112-581 or similar models. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Available for OE direct fuel injection only and with port fuel injection provisions and a burst panel flange options. For the port fuel injection option, the high volume -8AN fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short (such as Pico, or LS7) fuel injectors.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-04FF313    300-716BK  New

Qty:
In Stock & Ready to Ship
$939.51
Holley Engine Intake Manifold
  • Holley EFI Ultra Lo-Ram Intake Manifold Kit
  • Holley EFI Ultra Lo-Ram Intake Manifold Kit; Fits GM Gen V Hemi Engines w/LT Cylinder Heads; Standard Plenum Top; Black Powder Coat Finish;
  • Product Attributes:
    • Usage: Racing
    • WARNING CA Proposition 65: No
  • Features:
    • Designed For GM Gen V Engines Equipped With GM LT Type Cylinder Heads
    • Engineered For Forced Induction Supercharged Or Turbocharged Engine Applications
    • 0.97 in. Taller Than A Factory LT1 Manifold
    • Modular And Front Entry Plenum Flange Allows Design And Fabrication Of Special Throttle Body Adapters
    • Clears C7 Corvette Cowls And Hoods Without Modification
    • Kits With Port Injection Provide High Volume Fuel Rails With 3/4-16 O-ring Ports 8 AN
  • The Holley GM Gen V LT Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application. The front entry throttle body flange has a 105mm opening to work with throttle body part number 112-581 or similar models. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Available for OE direct fuel injection only and with port fuel injection provisions and a burst panel flange options. For the port fuel injection option, the high volume -8AN fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short (such as Pico, or LS7) fuel injectors.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-3FA6391    300-912  New

Qty:
In Stock & Ready to Ship
$968.27
Holley Engine Intake Manifold
  • Holley EFI Ultra Lo-Ram Intake Manifold Base
  • Holley EFI Ultra Lo-Ram Intake Manifold Base; Round; Cast Aluminum; Natural Finish; -8AN Port Fuel Rail; 1/8 NPT Accessory Port;
  • Product Attributes:
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Cast Aluminum Construction
    • Modular Design
    • Refined Port Design With Streamlined Injector Boss For Reduced Turbulence Without Loss Of Flow Area
    • Allows A Variety Of Throttle Valves Including Large Monoblade
  • Finally, an affordable Coyote intake manifold that also performs! The Hi-Ram and Ultra Lo-Ram are designed to fit stock bolt pattern OE heads found on the 2011-2023 Ford 5.0 Coyotes and related engine families, such as, Voodoo and Predators. These kits include fuel rails for use with OEM type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, both manifolds have a 9.20-inch runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold, plus clears 2015-2023 Mustang factory hoods. Offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150x66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-2023 GT throttle bodies can be used with the optional 717-18 adaptor.The aggressively designed Hi-Ram is constructed in a two-piece design to accommodate for air to water intercoolers and feature up to 20% more plenum volume versus Ultra Lo Rams. This manifold design is only offered in an oval throttle body configuration.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-274291F    300-269  New

Qty:
In Stock & Ready to Ship
$519.04
Holley Engine Intake Manifold
  • EFI Intake Manifold
  • EFI Intake Manifold; Single Plane; Fits w/Gen III LS Engines w/LS7 Cylinder Heads; 4150 Flange; Incl Fuel Rails/Hardware/Gaskets; Cast Aluminum; Silver;
  • Product Attributes:
    • Cylinder Head Type: Ls7
    • Engine Make/Size: Gen. Iii Ls1/ls2/ls6
    • Usage: Racing
    • WARNING CA Proposition 65: No
  • Features:
    • 4150 Square Bore Flange
    • Cast Aluminum Construction
  • Single Plane EFI LS Intake Manifold. Fits all GM LS Gen III engines equipped with LS7 cylinder heads. Designed with a 4150 Square bore flange. Optimized runner layout and constant cross sectional area - broad torque curve, best vehicle performance from 2500-7000 RPM Minimum carb flange height - fit in vehicles with minimum hood modifications. Cast aluminum construction - great manifold for centrifugal blower, turbocharged or NOS power adder applications The manifold kit includes the fuel rails, mounting hardware, and o-ring cylinder head mounting flange gaskets.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-095DB49    300-680  New

Qty:
In Stock & Ready to Ship
$1,003.46
Holley Engine Intake Manifold
  • Holley EFI Ultra Lo-Ram Intake Manifold Kit
  • Holley EFI Ultra Lo-Ram Intake Manifold Kit; Upper; LS3; Single Injector Front Feed; Silver Cast Satin Finish; 6.86 in. Height W/Throttle Body Adapter;
  • Product Attributes:
    • Cylinder Head Type: Ls3/l92
    • Emission: N/a
    • Engine Make/Size: Chevy Ls3
    • RPM Range: 7000-8000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • For Forced Induction Engines With Peak Power At 7000-8000 Rpm
    • Modular Design Allowing The Use Of Front-Feed Plenum Entry
    • Custom Inlet Duct And Throttle Body Placement
    • High Volume Fuel Rails And Mounting Hardware Included
  • Available with single or dual injector provisions and a burst panel flange, the LS3 Ultra Lo-Ram intake manifold is designed for boosted combinations with hood clearance in mind. The Holley LS3 Lo-Ram intake manifold kits are designed for GM LS Gen III and IV engines equipped with GM LS3/L92 cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7000-8000 rpm depending on the application. The Ultra Lo-Ram plenum flange has a 105 mm opening to work with throttle body part number 112-581 or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front configuration. The LS3 Ultra Lo-Ram is constructed to provide a very low profile modular intake manifold suitable for fabrication of special throttle body adapters or inlet ducts for custom installations. Available with single or dual injector provisions and a burst panel flange options. The fuel rail kits come with two sets of brackets. A set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-2FF83A0    300-683BK  New

Qty:
In Stock & Ready to Ship
$1,220.20
Holley Engine Intake Manifold
  • Holley EFI Lo-Ram Intake Manifold Base
  • Holley EFI Lo-Ram Intake Manifold Base; Upper; LS3; Dual Injector Top Feed; Black Satin Finish; W/Fuel Rails;
  • Product Attributes:
    • Cylinder Head Type: Ls3/l92
    • Emission: N/a
    • Engine Make/Size: Chevy Ls3
    • RPM Range: 7000-8000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • For Forced Induction Engines With Peak Power At 7000-8000 Rpm
    • Modular Design Allowing The Use Of Front-Feed Plenum Entry
    • Custom Inlet Duct And Throttle Body Placement
    • High Volume Fuel Rails And Mounting Hardware Included
  • The LS3/L92 Lo-Ram manifolds base intake manifold is designed with a low height to aidthe packaging of a plenum mounted air-to-water intercooler for forced induction (supercharged or turbocharged) engine applications with peak power at 7000-8000 rpm. The Holley LS3 Lo-Ram intake manifold kits are designed for GM LS Gen III and IV engines equipped with GM LS3/L92 cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and the 105 mm throttle body part number 112-581 or similar models. The base intake manifold is designed with a low height to aid the packaging of a plenum-mounted air-to-water intercooler. Additional manifold designs include both single and dual injector options. Available with both as-cast satin and black power-coat finishes. High volume fuel rails for eight and sixteen injector configurations. Mounting hardware included with 3/4-16 O-ring ports (8 AN)

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-45C52E2    822112-1  New

Qty:
In Stock & Ready to Ship
$776.95
Holley Engine Intake Manifold
  • Sniper EFI Intake Manifold
  • Sniper EFI Intake Manifold; Low Profile; Fits w/GM LS3/L92; 102 mm. Throttle Bore; T6061 Aluminum; Black; RPM Power Band 1800-7000; Includes 3/8 in. Fuel Rail/Gaskets/Hardware;
  • Product Attributes:
    • Cylinder Head Type: Ls3/l92
    • Emission: N/a
    • Engine Make/Size: Gm Ls3/l92
    • RPM Range: 1800-7000
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Black Finish Creates Stealthy Under-Hood Styling
    • 102Mm Throttle Bore Opening For Increased Air Flow
    • 100 Percent TIG Welded For Strength And Durability
    • Includes 3/8 Inches Fuel Rail Kits Sniper W/Logo Laser Engraved
    • Product Includes All Gaskets And Hardware For A Hassle-free Installation
  • Holley Sniper Fabricated Manifolds continues to push the aftermarket by introducing Low Profile intakes for GM LS Engines. These Intakes are a good looking, perform well, and offer an extremely good value for a performance sheet metal style intake manifold for the very popular GM LS engine family. Each manifold is ready to bolt on out of the box and are designed to accept our Sniper high-flow throttle bodies and include high flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured and welded for a perfect fit and maximum structural integrity. Choice of Throttle Body opening sizes of 92mm & 102mm are available

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 41 - 50 of 154 Products for Engine Intake Manifold.