Shop By Brand

The Following brands are available based on your search.

  • Design Engineering
    Design Engineering
  • Dorman
    Dorman
  • Thermo-Tec
    Thermo-Tec

Showing Products For 1973 Volkswagen Beetle Heat Reflective Tape

Below are all the different brands and applications for 1973 Volkswagen Beetle Heat Reflective Tape

Showing 1 - 10 of 16 Products for Heat Reflective Tape.

Refine Your Search

Thermo-Tec
Heat Reflective Tape Thermo-Tec

P311-12003DF    13997  New

Qty:
In Stock & Ready to Ship
$39.67
Thermo-Tec Heat Reflective Tape
  • Seam Tape
  • Seam Tape; 2 in. x 30 ft.; 2 Layer Aluminum Foil;
  • Features:
    • Works Great For Taping Seams
    • Provides A Reflective Heat Barrier
    • 2 Layer Foil w/Acrylic Adhesive System
    • Works Well In Warm And Cold Weather
    • Tape Is Flame Retardant
    • Puncture Proof And Tear Resistant
  • The tape contains a 2-layer foil with a special acrylic adhesive system. Works extremely well in both warm and cold weather conditions with superior sticking. Tape is flame retardant, highly puncture proof and tear resistant.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Thermo-Tec
Additional Fitment Information:
Vehicle
Design Engineering
Heat Reflective Tape Design Engineering

P311-59DB1D7    10468  New

Qty:
In Stock & Ready to Ship
$45.27
Design Engineering Heat Reflective Tape
  • Cool Tape™ Insulating Tape
  • Cool Tape™ Insulating Tape; 2 in. x 30 ft. Roll;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
  • Features:
    • Withstands Direct Heat Up To 400 Degrees F And 2000 Degrees F Radiant Heat
    • Flexible And Easy To Apply
    • Strong Self-Adhesive Backing
    • Use To Secure Panels/Seal Air Boxes/Wrap Wiring And More
  • Cool Tape(TM) is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape(TM) is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Withstands direct heat up to 400°F Use to secure panels, seal air boxes, wrap wiring & more Strong self-adhesive backing Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look! *DO NOT apply directly to exhaust components.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Design Engineering
Additional Fitment Information:
Vehicle
Design Engineering
Heat Reflective Tape Design Engineering

P311-2E301E9    10462  New

Qty:
In Stock & Ready to Ship
$41.76
Design Engineering Heat Reflective Tape
  • Reflect-A-Cool™ Heat Tape
  • Reflect-A-Cool™ Heat Tape; 24 in. x 24 in. Sheet;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
  • Features:
    • Radiant Heat Protection Up To 2000 Degrees F
    • Self-Adhesive Backing With Release Liner For Easy Installation
    • Moisture And Solvent Resistant
    • Virtually NO Clearance Needed
    • Light Weight And Flexible-Trim To Size
    • 0.0065 in. Thick
    • Easy To Apply- Wont Lift Off
    • 24 in. x 24 in. sheet
  • Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000°F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won't lift off *DO NOT apply directly to exhaust components.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Design Engineering
Additional Fitment Information:
Vehicle
Design Engineering
Heat Reflective Tape Design Engineering

P311-5BE9C37    10460  New

Qty:
In Stock & Ready to Ship
$35.56
Design Engineering Heat Reflective Tape
  • Reflect-A-Cool™ Heat Tape
  • Reflect-A-Cool™ Heat Tape; 12 in. x 12 in. Sheet;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
  • Features:
    • Radiant Heat Protection Up To 2000 Degrees F
    • Self-Adhesive Backing With Release Liner For Easy Installation
    • Moisture And Solvent Resistant
    • Virtually NO Clearance Needed
    • Light Weight And Flexible-Trim To Size
    • 0.0065 in. Thick
    • Easy To Apply- Wont Lift Off
    • 12 in. x 12 in. Sheet
  • Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000°F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won't lift off *DO NOT apply directly to exhaust components.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Design Engineering
Additional Fitment Information:
Vehicle
Design Engineering
Heat Reflective Tape Design Engineering

P311-2962CD6    10413  New

Qty:
In Stock & Ready to Ship
$89.72
Design Engineering Heat Reflective Tape
  • Cool Tape™ Plus Insulating Tape
  • Cool Tape™ Plus Insulating Tape; 2 in. x 60 ft.;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
  • Features:
    • Withstands Direct Heat Up To 400 Degrees F And 2000 Degrees F Radiant Heat
    • Flexible And Easy To Apply
    • Strong Self Adhesive Backing
    • Use To Secure Panels/Seal Air Boxes/Wrap Wiring And More
  • Cool Tape(TM) is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape(TM) is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Withstands direct heat up to 400°F Use to secure panels, seal air boxes, wrap wiring & more Strong self-adhesive backing Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look! *DO NOT apply directly to exhaust components.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Design Engineering
Additional Fitment Information:
Vehicle
Design Engineering
Heat Reflective Tape Design Engineering

P311-23630C3    10391  New

Qty:
In Stock & Ready to Ship
$34.16
Design Engineering Heat Reflective Tape
  • Reflect-A-GOLD™ Heat Tape
  • Reflect-A-GOLD™ Heat Tape; 12 in. x 12 in. Sheet;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
  • Features:
    • For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
    • Handles Continuous Temps Up To 800 Degrees F
    • Resists UV Degradation For Long-Term Performance
    • Adhesive Protected By Release Liner Rated Up To 325 Degrees F
    • Virtually NO Clearance Needed
    • Light Weight And Flexible-Trim To Size
    • 0.0065 in. Thick
    • Easy To Apply- Wont Lift Off
  • Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is an adhesive heat shield made from a metalized polyimide laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off *DO NOT apply directly to exhaust components.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Design Engineering
Additional Fitment Information:
Vehicle
Design Engineering
Heat Reflective Tape Design Engineering

P311-0AF3D5D    10408  New

Qty:
In Stock & Ready to Ship
$30.47
Design Engineering Heat Reflective Tape
  • Cool Tape™ Insulating Tape
  • Cool Tape™ Insulating Tape; 1 1/2 in. x 15 ft.;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
  • Features:
    • Withstands Direct Heat Up To 400 Degrees F And 2000 Degrees F Radiant Heat
    • Flexible And Easy To Apply
    • Strong Self-Adhesive Backing
    • Use To Secure Panels/Seal Air Boxes/Wrap Wiring/More
  • Cool Tape(TM) is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape(TM) is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Withstands direct heat up to 400°F Use to secure panels, seal air boxes, wrap wiring & more Strong self-adhesive backing Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look! *DO NOT apply directly to exhaust components.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Design Engineering
Additional Fitment Information:
Vehicle
Design Engineering
Heat Reflective Tape Design Engineering

P311-52EB6CE    10396  New

Qty:
In Stock & Ready to Ship
$51.73
Design Engineering Heat Reflective Tape
  • Reflect-A-GOLD™ Heat Tape
  • Reflect-A-GOLD™ Heat Tape; 2 in. x 15 ft. Roll;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
  • Features:
    • For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
    • Handles Continuous Temps Up To 800 Degrees F
    • Resists UV Degradation For Long-Term Performance
    • Adhesive Protected By Release Liner Rated Up To 325 Degrees F
    • Virtually NO Clearance Needed
    • Light Weight And Flexible-Trim To Size
    • 0.0065 in. Thick
    • Easy To Apply- Wont Lift Off
  • Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off Tape is available in 1-1/2 in. to 2 in. wide rolls *DO NOT apply directly to exhaust components.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Design Engineering
Additional Fitment Information:
Vehicle
Design Engineering
Heat Reflective Tape Design Engineering

P311-45A34B0    10461  New

Qty:
In Stock & Ready to Ship
$34.29
Design Engineering Heat Reflective Tape
  • Reflect-A-Cool™ Heat Tape
  • Reflect-A-Cool™ Heat Tape; 12 in. x 24 in. Sheet;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
  • Features:
    • Radiant Heat Protection Up To 2000 Degrees F
    • Self-Adhesive Backing With Release Liner For Easy Installation
    • Moisture And Solvent Resistant
    • Virtually NO Clearance Needed
    • Light Weight And Flexible-Trim To Size
    • 0.0065 in. Thick
    • Easy To Apply- Wont Lift Off
    • 12 in. x 24 in. sheet
  • Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000°F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won't lift off *DO NOT apply directly to exhaust components.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Design Engineering
Additional Fitment Information:
Vehicle
Design Engineering
Heat Reflective Tape Design Engineering

P311-1FC8905    10395  New

Qty:
In Stock & Ready to Ship
$75.56
Design Engineering Heat Reflective Tape
  • Reflect-A-GOLD™ Heat Tape
  • Reflect-A-GOLD™ Heat Tape; 1.5 in. x 30 ft. Roll;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
  • Features:
    • For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
    • Handles Continuous Temps Up To 800 Degrees F
    • Resists UV Degradation For Long-Term Performance
    • Adhesive Protected By Release Liner Rated Up To 325 Degrees F
    • Virtually NO Clearance Needed
    • Light Weight And Flexible-Trim To Size
    • 0.0065 in. Thick
    • Easy To Apply- Wont Lift Off
  • Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off Tape is available in 1-1/2 in. to 2 in. wide rolls *DO NOT apply directly to exhaust components.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Design Engineering
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 16 Products for Heat Reflective Tape.