28-1/4 in. x 17-1/4 in. x 1-1/4 in. Core;
with 8-1/2 TOC (Transmission Oil Cooler; Center to Center); w/o EOC (Engine Oil Cooler); Replaces OEM 3 Rows Core
Radiator Cap Is Required
Product Attributes:
California_Prop 65 Message:Y
The structure and design of Spectra Premium Radiators are built to undertake the same durability and expectations of that of the OE.
Brand: Spectra
Additional Fitment Information:
Vehicle
Block
Engine
CID
CC
1973 - Buick LeSabre
V
8 Cyl 5.7L
350
-
1973 Buick LeSabre Radiator 8 Cyl 7.5L One Stop Solutions
P311-29DED43161New
20009 ,433161 ,752 ,8010161 ,CU161
Qty:
In Stock & Ready to Ship
$143.96
OSC Cooling Products 161 New Radiator
3 ROW Equivalent
Product Attributes:
ASIN:B001krkufm
BulletPoint 1:Hassle Free Installation
BulletPoint 2:O.e. Performance And Exceptional Quality
BulletPoint 3:Engineering Enhancements Provide Improved Cooling And Longer Life Cycle
BulletPoint 4:Components Are Fitted And Torqued In Place To Factory Specifications
BulletPoint 5:Premium Grade Tubes, Fins, Headers, Tanks, And Other Components Are Used To Make Osc Radiators More Durable.
BulletPoint 6:Drop In Fit, Form And Function. All Necessary Fittings Or Hardware Are Included In Each Unit For An Easy Install.
BulletPoint 7:Complete Radiators 100% Tested Up To Three Times During Production: Osc Tests The Transmission And Engine Oil Coolers Prior To Installation Into The Tank. The Radiator Core Is Tested Prior To Assembly And Then Once The Assembly Is Complete The Unit Is Tes
BulletPoint 8:Enhancements Added To Solve Original Design Failures And To Improve The Life Of High Mileage Vehicles: Adding More Fins Per Inch, Thicker Cores And Even Larger Transmission Coolers To Overcome The Added Heat Associated With These Vehicles.
Cap Included:No
Core Height:28 1/4
Core Material:Pa
Core Row Quantity:Pa 1 Row Equivalent To 3 Row
Core Thickness:
1-1/4
32
Core Width:17 1/4
Down Flow Or Cross Flow Type:Crossflow
Engine Oil Cooler Included:No
Engine Oil Cooler Type:None
Inlet Diameter:1 5/16 - 1 9/16
Inlet Header Length:18 3/4
Inlet Header Width:2 7/16
Outlet Diameter:1 9/16
Outlet Header Length:18 3/4
Outlet Header Width:2 7/16
Tank Material:Plastic
Transmission Oil Cooler Diameter:1 1/4
Transmission Oil Cooler Distance between Fittings:8 1/2
Transmission Oil Cooler Included:Yes
Transmission Oil Cooler Type:Concentric
OSC Premium New Automotive Radiator is designed to OES form and function. OSC radiators are technically advanced and made from premium grade aluminum. The tubes are cadmium plated inside and out to prevent premature failure. OSC does not substitute aluminum coolers in place of Stainless Steel plate or Copper and Brass concentric coolers and they use a die cut gasket to ensure there are no leaks. Each radiator is individually pressure tested and engineered for multi-fit without compromising the look and fit. All necessary fittings or hardware are included in each unit. All units meet OES cooler design with copper concentric coolers and plate coolers where originally equipped.
Brand: One Stop Solutions
Additional Fitment Information:
Vehicle
Block
Engine
CID
CC
1973 - Buick LeSabre
V
8 Cyl 7.5L
455
7456
1973 Buick LeSabre Radiator 8 Cyl 7.5L One Stop Solutions
P311-2AAF48A2350New
25731389 ,8012349 ,CU2350 ,GM3010464
Qty:
In Stock & Ready to Ship
$162.79
OSC Cooling Products 2350 New Radiator
4 ROW Equivalent
Product Attributes:
ASIN:B001krf5gg
BulletPoint 1:Hassle Free Installation
BulletPoint 2:O.e. Performance And Exceptional Quality
BulletPoint 3:Engineering Enhancements Provide Improved Cooling And Longer Life Cycle
BulletPoint 4:Components Are Fitted And Torqued In Place To Factory Specifications
BulletPoint 5:Premium Grade Tubes, Fins, Headers, Tanks, And Other Components Are Used To Make Osc Radiators More Durable.
BulletPoint 6:Drop In Fit, Form And Function. All Necessary Fittings Or Hardware Are Included In Each Unit For An Easy Install.
BulletPoint 7:Complete Radiators 100% Tested Up To Three Times During Production: Osc Tests The Transmission And Engine Oil Coolers Prior To Installation Into The Tank. The Radiator Core Is Tested Prior To Assembly And Then Once The Assembly Is Complete The Unit Is Tes
BulletPoint 8:Enhancements Added To Solve Original Design Failures And To Improve The Life Of High Mileage Vehicles: Adding More Fins Per Inch, Thicker Cores And Even Larger Transmission Coolers To Overcome The Added Heat Associated With These Vehicles.
Cap Included:No
Core Height:30 1/2
Core Material:Pa
Core Thickness:5/8
Core Width:15 1/16
Down Flow Or Cross Flow Type:Crossflow
Engine Oil Cooler Included:No
Engine Oil Cooler Type:None
Inlet Diameter:1 5/16
Inlet Header Length:16 5/8
Inlet Header Width:2 7/16
Outlet Diameter:1 9/16
Outlet Header Length:16 5/8
Outlet Header Width:2 7/16
Tank Material:Plastic
Transmission Oil Cooler Distance between Fittings:11 1/2
Transmission Oil Cooler Included:Yes
Transmission Oil Cooler Type:Plated
OSC Premium New Automotive Radiator is designed to OES form and function. OSC radiators are technically advanced and made from premium grade aluminum. The tubes are cadmium plated inside and out to prevent premature failure. OSC does not substitute aluminum coolers in place of Stainless Steel plate or Copper and Brass concentric coolers and they use a die cut gasket to ensure there are no leaks. Each radiator is individually pressure tested and engineered for multi-fit without compromising the look and fit. All necessary fittings or hardware are included in each unit. All units meet OES cooler design with copper concentric coolers and plate coolers where originally equipped.
Brand: One Stop Solutions
Additional Fitment Information:
Vehicle
Block
Engine
CID
CC
1973 - Buick LeSabre
V
8 Cyl 7.5L
455
7456
1973 Buick LeSabre Radiator 8 Cyl 7.5L Onix
P311-26883F8OR161New
Qty:
In Stock & Ready to Ship
$127.49
Radiator
28-1/4 in. x 17-1/4 in. x 1-1/4 in. Core;
with 8-1/2 TOC (Transmission Oil Cooler; Center to Center); w/o EOC (Engine Oil Cooler); Replaces OEM 3 Rows Core
Product Attributes:
California_Prop 65:Yes
California_Prop 65 Message:May Cause Cancer Or Reproductive Harm
Onix Automotive is the market leader in the fastest growing category of value priced products. Onix now offers a “Drop-in-Fit” premium quality radiator line to motor mounts, and control arms to the company's portfolio. All of our lines are engineered and designed with top-of-the-line components giving our products a longer service life and better performance. Our goal is to develop and provide programs that enable our customers to increase sales and profits, while offering their customers goods of unequaled value.
Differential Cover; Bowtie Emblem; Fits GM 7.5 Rear Ends; Made From High-Quality Aluminum; Cast Gray Crinkle Finish; Features 2 Bolts to Stabilize Bearing Main Caps, Magnetic Drain Plug and Grade 8 Mounting Bolts. Sold Individually
Reinforced lightweight aluminum rear end cover designed to strengthen the rear housing case in heavy torque situations. The familiar Bowtie Emblem is raised and precision milled on a cast gray crinkle coated surface. Each cover includes two bolts to stabilize bearing main caps, a fluid capacity plug, a magnetic drain plug, and Grade 8 mounting bolts.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Radiator Proform
P311-52FC89A141-863New
Qty:
In Stock & Ready to Ship
$48.54
Slant-Edge Aluminum Breather Cap; Raised Bowtie Emblem; Push-In; Red
Slant-Edge Aluminum Breather Cap; 2.5 Inch Diameter; Raised/Milled Bowtie Emblem; Push-In Style; Fits 1.22 Inch Valve Cover Hole; Red Finish; Grommet Not Included; Officially Licensed Product; Sold each
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Slim-Fit Radiator System, Universal, 17-inch Core, GM Style with Inlet on Passenger Side and Outlet on Driver Side, Manual Transmission
Product Attributes:
Cap Color:Silver
Category:Radiators
Condition:New
Core Height (in):17
Core Thickness (in):2.4
Core Width (in):17
Fan CFM:1650
Feature/Benefit:Billet Aluminum Filler Neck With High Capacity Overflow Tube
Inlet Location:Driver Side
Max Recommended Horsepower:500
Mounting Style:Universal
Number Of Blades:8
Outlet Location:Passenger Side
Part Type:Radiator
Shroud Color:Natural
Transmission Type:Manual
Voltage Compatibility:12
The basic concept of automotive radiators hasn't changed in more than 100 years! And fans have been hung onto them in a mish-mash of ways for just as long. Since then, aside from materials and design improvements, NOTHING HAS CHANGED...UNTIL NOW! PROFORM is upending the radiator industry with the introduction of its new Slim-Fit Integrated Radiator System! No more cobbling together a core, a fan, and possibly a shroud, and gobbling up 8" of valuable front-to-back under-hood space, sometimes leading to clearance problems. BETTER DESIGN - UP TO 40% THINNER! AND SLEEK! PROFORM has completely rethought how the radiator, fan, thermostat, and shroud can come together seamlessly to create a unified radiator system that is under 4" thick (core/shroud), looks and works great, and is pre-assembled right out-of-the-box! This universal model is ready for customization, or might just happen to be the right size for easy installation into your vehicle. A hodge-podge of one hundred years of rigged-up cooling paraphernalia has come to an end. INNOVATION! What did we do? With revolutionary engineering we flipped the motor around so instead of hanging on the outside, it's integrated directly into a uniquely designed core made with state-of-the-art brazing technology (with no meaningful cooling compromise). Combined with a high-performance fan blade inserted into a smooth aluminum shroud, the result is the industry's narrowest, most streamlined look. Every PROFORM Slim-Fit Integrated Radiator includes a shroud, electric fan with adjustable thermostat, wiring harness, and radiator cap.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Radiator CSF
P311-066F18F7065New
Qty:
In Stock & Ready to Ship
$499.00
The KING Cooler - Ultimate Drag Race Radiator with SPAL Fan & Mounting Kit
CSF manufactures the most advanced and efficient radiator in the industry for your Vehicle. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
Product Attributes:
Core Material:Aluminum
Title:The King Cooler - Ultimate Drag Race Radiator W/ Spal Fan & Mounting Kit
Features:
3.5-inch thick 2-row core with CSF's exclusive B-tube technology
Threaded Bung size and thread pitch: 1 5/16" x 12G
Drain Plug Bung size and thread pitch: M12 x 1.5p
Universal mounting brackets included
Includes 9-inch SPAL fan
1-hour hand polished mirror-finish
Overall dimensions: 14.5H ? 10.0L ? 3.6W (5.65W with a fan installed)
After more than 9 months of R&D, and input from some of the best import drag race builders in N. America, CSF has brought to the sport compact market the most advanced drag race cooling system ever developed. Introducing the KING Cooler. For the longest time, buying a drag-race radiator was a tasking process. End users had to custom order the unit based on their connection and mounting specifications. Typically, this process would take 2-4 weeks and be rather expensive. CSF has eliminated this hassle by making sure that these units are in stock in both of CSF's coastal warehouses and on the shelves of distributors and supporting dealers around the world. Universal Fit Allows for Mounting in Multiple Different Configurations. The Triple-Pass Flow Structure allows the coolant to flow across the core of the radiator three times before exiting for lowest outlet temperatures possible. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval-shaped "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.