Finish Selecting Your Vehicle

Choose your Engine for your 1972 Ford Country Squire

  • 8 Cyl 5.0L
  • 8 Cyl 5.8L
  • 8 Cyl 6.6L
  • 8 Cyl 7.0L
  • 8 Cyl 7.5L

Shop By Brand

The Following brands are available based on your search.

  • Edelbrock
    Edelbrock
  • FAST
    FAST
  • Ford Racing
    Ford Racing
  • Holley
    Holley
  • Racing Head Service (RHS)
    Racing Head Service (RHS)
  • Weiand
    Weiand

Showing Products For 1972 Ford Country Squire Engine Intake Manifold

Below are all the different brands and applications for 1972 Ford Country Squire Engine Intake Manifold

Showing 1 - 10 of 166 Products for Engine Intake Manifold.

Refine Your Search

Weiand
1972 Ford Country Squire Engine Intake Manifold - Lower 8 Cyl 7.5L Weiand - Stealth Intake Manifold

P311-54FBB57    8021WND  New

Qty:
In Stock & Ready to Ship
$474.47
Weiand Engine Intake Manifold  Lower
  • Stealth™ Intake Manifold
  • Power Band Idle-6800 RPM; High Rise; w/Cobra Jet/Super Cobra Jet Heads; Square Carb. Mounting Flange; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Stealth™ Intake Manifold; Lower; Power Band Idle-6800 RPM; High Rise; w/Cobra Jet/Super Cobra Jet Heads; Square Carb. Mounting Flange; No EGR Provisions; Satin Finish;
  • Stealth(TM) Intake Manifold
  • Product Attributes:
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Ford Big Block V8
    • Front Height: 5.250 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Rear Height: 6.750 In.
    • RPM Range: Idle-6800
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Height Front 5.25 in.
    • Rear 6.75 in.
    • Port Size 2.49 in. Height x 2.20 in. Width
    • Idle-6800 RPM Power Band
    • Square Carburetor Mounting Flange
    • High Rise/Dual Plane Design
  • Stealth Intake Manifold 429, 460 V8 (Cobra Jet and Super Cobra Jet heads)This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1972 - Ford Country Squire Lower V 8 Cyl 7.5L 460 7539
Weiand
1972 Ford Country Squire Engine Intake Manifold - Lower 8 Cyl 7.5L Weiand - Stealth Intake Manifold

P311-265CD37    8012  New

Qty:
In Stock & Ready to Ship
$412.00
Weiand Engine Intake Manifold  Lower
  • Stealth™ Intake Manifold
  • Power Band Idle-6800 RPM; Low Rise; w/460 V8 Std. Heads; Square Carb Mounting Flange; 5.25in. Frt/6.75in. Rear Height; No EGR; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Stealth™ Intake Manifold; Lower; Power Band Idle-6800 RPM; Low Rise; w/460 V8 Std. Heads; Square Carb Mounting Flange; 5.25in. Frt/6.75in. Rear Height; No EGR; Satin Finish;
  • Stealth(TM) Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Ford Big Block V8
    • Front Height: 5.250 In.
    • Fuel System Type: Carb
    • Manifold Type: Low Rise
    • Number of Carbs: One
    • Rear Height: 6.750 In.
    • RPM Range: Idle-6800
    • Usage: Street/strip
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Port Size 2.15 in. Height x 1.89 in. Width
    • High Rise/Dual Plane Design
    • Height Front 5.25 in.
    • Rear 6.75 in.
    • Idle-6800 RPM Power Band
    • No EGR Provisions
    • Square Carburetor Mounting Flange
  • Stealth Intake Manifold 429, 460 V8 (standard heads)
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1972 - Ford Country Squire Lower V 8 Cyl 7.5L 460 7539
Weiand
1972 Ford Country Squire Engine Intake Manifold - Upper 8 Cyl 5.8L Weiand - X-CELerator Intake Manifold

P311-5482CFA    7516  New

Qty:
In Stock & Ready to Ship
$498.43
Weiand Engine Intake Manifold  Upper
  • Power Band 1500-7000 RPM; Low Rise; w/2V Heads; Square Carb Mounting Flange; 4.28 in. Front H/5.36 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Not Legal For Street Use in California~Legal Only For Off-Highway Use Or Racing~Legal For Use On Pre-Emission-Controlled Motor Vehicles/Motor Vehicle Eng.
  • X-CELerator Intake Manifold; Upper; Power Band 1500-7000 RPM; Low Rise; w/2V Heads; Square Carb Mounting Flange; 4.28 in. Front H/5.36 in. Rear Height; Satin Finish;
  • X-CELerator Intake Manifold
  • Product Attributes:
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Ford Small Block V8
    • Front Height: 4.280 In.
    • Fuel System Type: Carb
    • Manifold Type: Low Rise
    • Number of Carbs: One
    • Rear Height: 5.360 In.
    • RPM Range: 1500-7000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Single Plane Design
    • Square Carburetor Mounting Flange
    • Power Band 1500-7000 RPM
    • Height Front 4.28 in.
    • Rear 5.36 in.
    • Port Size 1.95 in. Height x 1.34 in. Width
    • New Updated Casting Design
  • The WEIAND X-CELerator SERIES: 360°, single-plane, open plenum manifold designed primarily for high-performance street, drag, marine and oval track use. With an effective rpm range of 2000 to 6500 rpm, this series works best with ahigher compression ratio, 280° or more of cam duration and headers with 1-5/8 primary tubes. Being a mid- to high-rpm manifold, a standard transmission, or an automatic transmission with a 3000 rpm stall converter, is highly recommended. The carburetor mounting pad is designed to accept current performance aftermarket carburetors. The WEIAND X-CELerator Series is the ultimate street/strip performance manifold for single 4Vapplications where increased torque and power is required in the mid and high rpm ranges.
Brand: Weiand
Position: Upper
Additional Fitment Information:
Vehicle Engine Version Position Block Engine CID CC
1972 - Ford Country Squire Cleveland Upper V 8 Cyl 5.8L 351 5753
Weiand
1972 Ford Country Squire Engine Intake Manifold - Lower 8 Cyl 7.5L Weiand - Stealth Intake Manifold

P311-54FBB57    8021WND  New

Qty:
In Stock & Ready to Ship
$474.47
Weiand Engine Intake Manifold  Lower
  • Stealth™ Intake Manifold
  • Power Band Idle-6800 RPM; High Rise; w/Cobra Jet/Super Cobra Jet Heads; Square Carb. Mounting Flange; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Stealth™ Intake Manifold; Lower; Power Band Idle-6800 RPM; High Rise; w/Cobra Jet/Super Cobra Jet Heads; Square Carb. Mounting Flange; No EGR Provisions; Satin Finish;
  • Stealth(TM) Intake Manifold
  • Product Attributes:
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Ford Big Block V8
    • Front Height: 5.250 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Rear Height: 6.750 In.
    • RPM Range: Idle-6800
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Height Front 5.25 in.
    • Rear 6.75 in.
    • Port Size 2.49 in. Height x 2.20 in. Width
    • Idle-6800 RPM Power Band
    • Square Carburetor Mounting Flange
    • High Rise/Dual Plane Design
  • Stealth Intake Manifold 429, 460 V8 (Cobra Jet and Super Cobra Jet heads)This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1972 - Ford Country Squire Lower V 8 Cyl 7.5L 460 7539
Weiand
1972 Ford Country Squire Engine Intake Manifold - Upper 8 Cyl 5.8L Weiand - X-CELerator Intake Manifold

P311-5482CFA    7516  New

Qty:
In Stock & Ready to Ship
$498.43
Weiand Engine Intake Manifold  Upper
  • Power Band 1500-7000 RPM; Low Rise; w/2V Heads; Square Carb Mounting Flange; 4.28 in. Front H/5.36 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal For Use On Pre-Emission-Controlled Motor Vehicles/Motor Vehicle Eng.~Legal Only For Off-Highway Use Or Racing~Not Legal For Street Use in California
  • X-CELerator Intake Manifold; Upper; Power Band 1500-7000 RPM; Low Rise; w/2V Heads; Square Carb Mounting Flange; 4.28 in. Front H/5.36 in. Rear Height; Satin Finish;
  • X-CELerator Intake Manifold
  • Product Attributes:
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Ford Small Block V8
    • Front Height: 4.280 In.
    • Fuel System Type: Carb
    • Manifold Type: Low Rise
    • Number of Carbs: One
    • Rear Height: 5.360 In.
    • RPM Range: 1500-7000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Single Plane Design
    • Square Carburetor Mounting Flange
    • Power Band 1500-7000 RPM
    • Height Front 4.28 in.
    • Rear 5.36 in.
    • Port Size 1.95 in. Height x 1.34 in. Width
    • New Updated Casting Design
  • The WEIAND X-CELerator SERIES: 360°, single-plane, open plenum manifold designed primarily for high-performance street, drag, marine and oval track use. With an effective rpm range of 2000 to 6500 rpm, this series works best with ahigher compression ratio, 280° or more of cam duration and headers with 1-5/8 primary tubes. Being a mid- to high-rpm manifold, a standard transmission, or an automatic transmission with a 3000 rpm stall converter, is highly recommended. The carburetor mounting pad is designed to accept current performance aftermarket carburetors. The WEIAND X-CELerator Series is the ultimate street/strip performance manifold for single 4Vapplications where increased torque and power is required in the mid and high rpm ranges.
Brand: Weiand
Position: Upper
Additional Fitment Information:
Vehicle Engine Version Position Block Engine CID CC
1972 - Ford Country Squire Cleveland Upper V 8 Cyl 5.8L 351 5753
Weiand
1972 Ford Country Squire Engine Intake Manifold - Lower 8 Cyl 7.5L Weiand - Stealth Intake Manifold

P311-265CD37    8012  New

Qty:
In Stock & Ready to Ship
$412.00
Weiand Engine Intake Manifold  Lower
  • Stealth™ Intake Manifold
  • Power Band Idle-6800 RPM; Low Rise; w/460 V8 Std. Heads; Square Carb Mounting Flange; 5.25in. Frt/6.75in. Rear Height; No EGR; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Stealth™ Intake Manifold; Lower; Power Band Idle-6800 RPM; Low Rise; w/460 V8 Std. Heads; Square Carb Mounting Flange; 5.25in. Frt/6.75in. Rear Height; No EGR; Satin Finish;
  • Stealth(TM) Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Ford Big Block V8
    • Front Height: 5.250 In.
    • Fuel System Type: Carb
    • Manifold Type: Low Rise
    • Number of Carbs: One
    • Rear Height: 6.750 In.
    • RPM Range: Idle-6800
    • Usage: Street/strip
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Port Size 2.15 in. Height x 1.89 in. Width
    • High Rise/Dual Plane Design
    • Height Front 5.25 in.
    • Rear 6.75 in.
    • Idle-6800 RPM Power Band
    • No EGR Provisions
    • Square Carburetor Mounting Flange
  • Stealth Intake Manifold 429, 460 V8 (standard heads)
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1972 - Ford Country Squire Lower V 8 Cyl 7.5L 460 7539
Edelbrock
1972 Ford Country Squire Engine Intake Manifold 8 Cyl 6.6L Edelbrock - Performer 400 Intake Manifold

P311-13B9B89    2171  New

Qty:
In Stock & Ready to Ship
$482.73
Edelbrock Engine Intake Manifold
  • Cast Finish; 4 bbl Carb; Non-EGR; Idle-5500rpm; For 4 bbl Carbs; Valley Width 8.53125 in.;Not Legal For Sale Or Use In California Recommend Edelbrock Gasket PN[7265] for Manifold Gasket~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
  • MANIFOLD; 1971-82 FORD 351M-400; PERFORMER
  • Performer 400 Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Ford 351m-400
    • Number of Carbs: One
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
  • Edelbrock part #2171 Performer 351M/400M intake manifold is designed for 400 c.i.d. Ford V8's produced from 1971 to 1982 with 2V Cleveland heads and 351M V8's produced from 1975 to 1982. Will not fit 1974 and earlier 351C V8's. Valley width measures 8-17/32". Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1972 - Ford Country Squire V 8 Cyl 6.6L 400 6556
Edelbrock
1972 Ford Country Squire Engine Intake Manifold 8 Cyl 7.5L Edelbrock - Performer 460 Intake Manifold

P311-1C40787    2166  New

Qty:
In Stock & Ready to Ship
$453.12
Edelbrock Engine Intake Manifold
  • Cast Finish; Non-EGR; Idle-5500rpm; For 4 bbl Carbs w/Electric Choke; Street/Hi Perf. Use Only;Not Legal For Sale Or Use In California Will Not Accept Stock Motorcraft Spread-Bore Carburetor~Recommend Edelbrock Gasket PN[7223] for Manifold Gasket~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
  • MANIFOLD; 1968-87 FORD 429-460; PERFORMER
  • Performer 460 Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Ford 429-460
    • Number of Carbs: One
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • Accepts Late-Model Choke
    • Water Neck
    • And HEI
    • Accepts A/C And Alternator
    • Accepts Exhaust Heated Chokes
  • Edelbrock part #2166 Performer 460 intake manifold is designed for street 429/460 c.i.d. Ford V8's. Will not fit 429 Cobra-Jets or 1966-68 462 Lincolns and will not accept stock spread-bore carb. Will not fit 1988 and later models. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. Must use stock OE EGR plate!
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1972 - Ford Country Squire V 8 Cyl 7.5L 460 7539
Weiand
Engine Intake Manifold Weiand

P311-2466FAB    7151WND  New

Qty:
In Stock & Ready to Ship
$719.53
Weiand Engine Intake Manifold
  • 6-71 / 8-71 SuperCharger Intake Manifold
  • 6-71 / 8-71 SuperCharger Intake Manifold; Lower; w/Rectangular Port Heads; Includes Rear Mounted Pop Off Plate; w/Boost Gauge Port; Satin Finish;
  • Product Attributes:
    • Blower Size:
      • 6-71
      • 8-71
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Chevy Big Block V8
    • Number of Carbs: None; For Fuel Injection
    • RPM Range: N/a
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Easier Installation
    • Satin Finish
  • 6-71/8-71 Chevy B/B 396-502

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Weiand
Additional Fitment Information:
Vehicle
FAST
Engine Intake Manifold FAST

P311-3C605F6    146303  New

Qty:
In Stock & Ready to Ship
$1,368.21
  • LSXHR 103mm Intake Manifold for Cathedral Port LS1, LS2 and LS6
  • FAST® is expanding their line of the industry’s first polymer tunnel ram-style intake manifold, ideal for generating maximum power in boosted and naturally aspirated GM Cathedral Port LS engines.
  • Product Attributes:
    • Aftermarket Fuel Rail Required: No
    • Basic Operating RPM Range: 5000-7500
    • Cylinder Head Configuration: Ls1 / Cathedral Port
    • EGR: No
    • Engine Block Style: Stock/ Oem Standard Deck
    • Injection Style: Multi-port
    • Injectors Included: No
    • Intake Section Included: Complete
    • Multi-Port Fuel Rails Included: Yes
    • Supplemental Bosses Cast-In: No
    • Supplemental Bosses Machined: Yes
    • Throttle Body Bore Size: 103mm
    • Throttle Body Included: No
  • The FAST LSXHR 103mm Intake Manifold is ideal for generating maximum power in boosted and naturally aspirated GM LS cathedral port engines. It ships with a set of “tall” removeable velocity stacks, however “medium” and “short” stack options can be purchased separately. This allows interchanging of the various runner lengths so racers can experiment with finding which combination makes the most power in their application. Its polymer construction is lightweight, very strong and virtually eliminates power-robbing heat soak that occurs with commonly available aluminum intake manifolds. The manifold has been optimized to make power from 5,000 to 7,500 RPM, with testing showing 20+ horsepower gains over competitor tunnel ram intake manifolds. The FAST LSXHR 103mm Intake Manifold is designed specifically with boosted applications in mind and is rated for up to 45psi of continuous boost pressure. The compound fuel injector angle aims the spray pattern for ideal atomization, resulting in maximum power production and superior drivability. Also included with the intake manifold are custom fuel rails and necessary hardware. A reversible top allows for forward- or firewall-facing throttle body installations. The intake manifold also features two nitrous nozzle bosses per runner for clean and easy direct port system installations. Additionally, its 103mm throttle body opening can be port matched up to 105mm.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 166 Products for Engine Intake Manifold.