California Proposition 65:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Class:C
Duty Type:Ld
Flow Rate:7-9 Gpm
Inner Diameter Top:Closed
Media Material:Enhanced Cellulose
Micron:21.00
Outer Diameter Top:2.95
Style:Spin-on Lube Filter
WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
First Time Fit
Production: -08/1971
Spin-On
Brand: Denso
Additional Fitment Information:
Vehicle
Submodel
Engine Designation
Block
Engine
CID
CC
Prod. Date Range
1971 - Toyota Corona
Mark II
8RC
L
4 Cyl 1.9L
-
1858
To:08-00-71
1971 Toyota Corona Engine Oil Filter - Main Opparts - IMC
K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
Performance Gold Oil Filter
Product Attributes:
Anti-Drain Back Valve:Yes
Bypass Valve:Yes
Filter Material:High Flow Premium Media
Gasket Material:Viton Rubber
Item Height:5.063 In. (129mm)
Item Weight:1.000 Lbs. (0.4 Kg)
Outside Diameter:3.000 In. (76mm)
Package Material:Paperboard
Package Type:Box
Product Box Height:5.630 In. (143mm)
Product Box Length:3.250 In. (83mm)
Product Box Width:3.250 In. (83mm)
PSI Relief Valve:11-14
Removal Nut:Yes
Removal Nut Size:1.000 In.
Style:Canister
Thread Size:.750 In. - 16
WARNING CA Proposition 65:No
Features:
OE Replacement Oil Filter
1 in. Exposed Nut Designed For Easy Oil Filter Removal
Heavy Duty Construction For Extreme Conditions
Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
H-5.063 in.; OD-3.0 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-17
Premium Oil Filter w/Wrench Off Nut
K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
Performance Gold Oil Filter
Product Attributes:
Anti-Drain Back Valve:Yes
Bypass Valve:Yes
Filter Material:High Flow Premium Media
Gasket Material:Viton Rubber
Item Height:5.063 In. (129mm)
Item Weight:1.000 Lbs. (0.4 Kg)
Outside Diameter:3.000 In. (76mm)
Package Material:Paperboard
Package Type:Box
Product Box Height:5.750 In. (146mm)
Product Box Length:3.190 In. (81mm)
Product Box Width:3.190 In. (81mm)
PSI Relief Valve:11-17
Removal Nut:Yes
Removal Nut Size:1.000 In.
Style:Canister
Thread Size:.750 In. - 16
WARNING CA Proposition 65:No
Features:
OE Replacement Oil Filter
1 in. Exposed Nut Designed For Easy Oil Filter Removal
Heavy Duty Construction For Extreme Conditions
Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Brand: K&N
Additional Fitment Information:
Vehicle
Block
Engine
CID
CC
1971 - Toyota Corona
L
4 Cyl 1.9L
113
1858
Engine Oil Filter Vibrant Performance
P311-1FE94B711120New
Qty:
In Stock & Ready to Ship
$45.56
Check Valve
Check Valve; Ball Style Inline One Way; Male AN: -12; Female ORB: -12;
Product Attributes:
WARNING CA Proposition 65:No
Features:
One Year Limited Warranty
6061 Aluminum Alloy
Vibrant Performance Ball Style Inline One Way Check Valves are lightweight and constructed entirely from 6061 Aluminum alloy. Our Ball Style Inline One Way Check Valves are designed to prevent flow back of all varieties of fuel, oil or coolant. Vibrant Check Valves will stand up to the most rigorous operating environments and are capable of handling temperatures ranging from -30deg F to 400deg F and operating pressures up to 300psi. All Vibrant Performance Ball Style Inline One Way Check Valves are available in anodized black only. Cracking pressure is adjustable between 2-5 psi. Use Thread Locker when setting cracking pressure. Flow Direction: Male AN to Female ORB.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Vibrant Performance
Additional Fitment Information:
Vehicle
Engine Oil Filter Earl's Performance
P311-48CAD27230308ERLNew
Qty:
In Stock & Ready to Ship
$70.24
Aluminum In-Line Oil Filter
Aluminum In-Line Oil Filter; Size: -8AN Male to -8AN Male; 140 Micron Screen Type Filter; Anodized Blue; Bagged Packaging;
Product Attributes:
Body Length:2.800 In.
Inlet Size:8an Male
Micron Rating:864
Outlet Size:8an Male
WARNING CA Proposition 65:No
Features:
For Use As Pre-Filter
For Oil Systems
Easily Disassembled
For Inspection and Cleaning
For use as pre- filters for oil systems. Easily disassembled for inspection and cleaning.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Earl's Performance
Additional Fitment Information:
Vehicle
Showing
1 -
10
of
17 Products for Engine Oil Filter.