New; 4 bbl; 750cfm; Square Flange 4150; Manual Choke; Single Fuel Inlet Capability; Gasoline; Mechanical Secondary w/Velocity Air Valve
Universal Throttle Linkage Type; Satin Finish; Non-EGR Compatible~Calibrated For Performance~Electric Choke PN1478 Can Be Added If Needed~For Use On Pre-Pollution Controlled Vehicles (PPCV)~Not For Computer Controlled Vehicles~Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~New Fuel Filter Between Fuel Pump And Carb Is Required~Adpt. PN2696 Or Kit PN2697 Is Required~Proper Installation Is The Responsibility Of Installer; May Void Warranty~Adpt. PN2732 Must Be Used When Installing On Certain Intakes
CARB; PERFORMER; 750 CFM; MANUAL CHOKE
Performer Series Carburetor
Product Attributes:
Barrel:Oem
CFM:Oem
Choke:Oem
Emission:Oem
Flange:Oem
Primary Power Valve:N/a
Throttle Bore:1.562 In.
Usage:Oem
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
Bolts On And Runs Right Out of The Box
Dependable Street Performance/Smooth Throttle Response
Factory Set Float Levels
Adjustments Are Rarely Needed
2-Piece Design Means No Gaskets Below The Fuel Level
Installation And Tuning DVD Included With Every New Carb
Designed/Calibrated For Optimum Street Performance
Match With A Variety of Manifolds
Includes Both Timed And Full Vacuum Ports For Ignition Advance
Made In The U.S.A.
The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1407 Performer Series 750 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Reman; 4 bbl; 750cfm; Square Flange 4150; Electric Choke; Single Fuel Inlet Capability; Gasoline; Mechanical Secondary w/Velocity Air Valve
Universal Throttle Linkage Type; Satin Finish; Non-EGR Compatible~Calibrated For Fuel Economy With Performance~For Use On Pre-Pollution Controlled Vehicles (PPCV)~Not For Computer Controlled Vehicles~Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~New Fuel Filter Between Fuel Pump And Carb Is Required~Adpt. PN2696 Or Kit PN2697 Is Required~Proper Installation Is The Responsibility Of Installer; May Void Warranty~Adpt. PN2732 Must Be Used When Installing On Certain Intakes
CARB; PERFORMER; 750 CFM; ELECTRIC CHOKE
Performer Series Carburetor
Product Attributes:
Barrel:Oem
CFM:Oem
Choke:Oem
Emission:Oem
Flange:Oem
Primary Power Valve:N/a
Throttle Bore:1.562 In.
Usage:Oem
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
Bolts On And Runs Right Out of The Box
Dependable Street Performance/Smooth Throttle Response
Factory Set Float Levels
Adjustments Are Rarely Needed
2-Piece Design Means No Gaskets Below The Fuel Level
Installation And Tuning DVD Included With Every New Carb
Includes Both Timed And Full Vacuum Ports For Ignition Advance
Designed For Stock To Performer Lever Engines
Match With A Variety of Manifolds
Made In The U.S.A.
The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1411 Performer Series 750 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Block
Engine
CID
CC
1971 - Buick Centurion
V
8 Cyl 7.5L
455
7456
Carburetor Proform
P311-43B58CE67199New
Qty:
In Stock & Ready to Ship
$653.72
Engine Carburetor; Race Series Model; 650 CFM; Mechanical Secondaries
Engine Carburetor; Race Series Model; 650 CFM Dual Inlet 4-Barrel With Mechanical Secondaries; Square Type Bore Mount; Features Billet Aluminum Plates and A Tumble Polished Finish; No Choke; Assembled With 100% New Components; Sold Each
Product Attributes:
Air Bleed Material:Brass
Air Bleed Size (Inner High Speed):35 / 35
Air Bleed Size (Outer Idle):73 / 73
Air Bleeds Included:Yes
Base Plate Material:Billet Aluminum
Booster Style:Down-leg Boosters
Calibration:Universal
Category:Carburetor - 650 Cfm
CFM:650 Cfm
Choke:No Choke
Discharge Nozzle Size (Primary / Secondary):.031 In. / .031 In.
EGR:Without Egr
Emissions:49 State Legal
Feature/Benefit:Lightweight Aluminum Construction
Flange Style:Square Bore
Ford Kickdown Bracket Included:No
Fuel:Gasoline
Fuel Inlet:Dual
Fuel Inlet Thread:7/8-in. X20
Fuel Line Inlet Distance:9-11/16 Inch
Idle/High Speed Air Bleed Sizes:73 / 35
Main Body Material:Lightweight Aluminum
Metering Block Material:Billet Aluminum
Needle & Seat:110
Number of Barrels:4
Part Type:Carburetor
Primary Main Jet Size:71 / .075
Primary Power Valve (Hg):4.5
Prop 65 - Short Label:Warning: Cancer And Reproductive Harm
Prop 65 (C, R or CR):Cr
Prop 65 Warning Chemical Listing:Lead
Prop 65 Warning Label:Prop65 Warning C And R.jpg
Secondaries:Mechanical Secondaries
Secondary Main Jet Size:78 / .084
Throttle Linkage:Universal
Finally an affordable high-performance race carburetor! PROFORM's new Race Series Carburetor is hand assembled in the U.S. utilizing the PROFORM High-Flow Carburetor Main Body, durable billet metering blocks, and a high performance billet throttle baseplate. The PROFORM Race Series Carb includes: PROFORM Carburetor Main Body, High-Flow Aluminum Main Body! , Dyno-Proven Horsepower and Torque Gain! , Adjustable, Screw-In Air Bleeds! , Maximum Air Flow: No Air Horn, Choke Tower, or Choke Control!, High-Rate Air-Flow Section Design!, Uses standard service and tuning components! PROFORM Billet Throttle Base Plates!!, Adjustable Secondary Air Flow Cam Bracket! , Solid Billet Construction!, Manufactured in the U.S.A.! , Timed and Full Vacuum Tubes for Accessories and Tunng!, Button Torx Head Throttle Plate Screws! , Power Valve Blow Out Protection! , Slip Link Mechanical Secondary Linkage!, Serviceable Throttle Levers!PROFORM Billet Metering Blocks, Solid Billet Construction! , Durable, No Warping or Porosity Problems! , Changeable Idle Feed Restriction! , Manufactured in the U.S.A.! PROFORM Aluminum Fuel Bowls, Lightweight Aluminum , Sight Glass Windows for easy float adjustment!
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Carburetor Proform
P311-4E109C767201New
Qty:
In Stock & Ready to Ship
$684.41
Engine Carburetor; Race Series Model; Gas; 850 CFM; Mechanical Secondaries
Engine Carburetor; Race Series Model; Gas; 850 CFM Dual Inlet 4-Barrel With Mechanical Secondaries; Square Type Bore Mount; Features Down-Leg Boosters and A Tumble Polished Finish; No Choke; Assembled With 100% New Components; Sold Each
Product Attributes:
Air Bleed Material:Brass
Air Bleed Size (Inner High Speed):35 / 35
Air Bleed Size (Outer Idle):70 / 70
Air Bleeds Included:Yes
Base Plate Material:Billet Aluminum
Booster Style:Down-leg Boosters
Calibration:Universal
Category:Carbs
CFM:850 Cfm
Choke:No Choke
Discharge Nozzle Size (Primary / Secondary):.033 In. / .033 In.
EGR:Without Egr
Emissions:49 State Legal
Feature/Benefit:Lightweight Aluminum Construction
Flange Style:Square Bore
Ford Kickdown Bracket Included:No
Fuel:Gasoline
Fuel Inlet:Dual
Fuel Inlet Thread:7/8-in. X20
Fuel Line Inlet Distance:9-11/16 Inch
Idle/High Speed Air Bleed Sizes:70 / 35
Main Body Material:Lightweight Aluminum
Metering Block Material:Billet Aluminum
Needle & Seat:120
Number of Barrels:4
Part Type:Carburetor
Primary Main Jet Size:78 / .084
Primary Power Valve (Hg):4.5
Prop 65 - Short Label:Warning: Cancer And Reproductive Harm
Prop 65 (C, R or CR):Cr
Prop 65 Warning Chemical Listing:Lead
Prop 65 Warning Label:Prop65 Warning C And R.jpg
Secondaries:Mechanical Secondaries
Secondary Main Jet Size:87.5 / .099
Throttle Linkage:Universal
Next Gen Race Series Carbs are HERE! PROFORM is taking its popular carburetors and making them even better! Here are the NEW Features: Main Body: Completely new main body design with contoured venturis and new 2-step down-leg boosters. The combination creates better air flow and increased fuel atomization! Fuel Bowls: Completely new design with increased internal baffling and a lower fuel ramp. The metering blocks also have a new baffle designed to work in conjunction with the bowl baffles to reduce fuel slosh and increase control. Throttle Base Plate: Slabbed shafts for increased airflow are now standard! In addition to these new features are all the great features that define the Race Series from the competition. Hand assembled and dyno tested in the U.S.A. by racers for racers! All PROFORM Race Series Carbs include the following: PROFORM's innovative all-aluminum next-gen main body with adjustable screw-in air bleeds and torx head squirters. Billet aluminum throttle base plate that is fully adjustable for fine tuning, and won't warp. The throttle lever is compatible with Ford kickdown bracketry, and the secondary opening rate can be adjusted with a linkage kit (sold separately). The billet aluminum metering blocks have a new fuel baffle design that integrates with the fuel bowl float for better fuel control. The metering blocks are fully adjustable as they always have been. Lastly, the aluminum fuel bowls with sight glass windows and billet fittings are a new design that is optimized with new features for better fuel control and easy float setting.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Carburetor Proform
P311-59FF4F067200New
Qty:
In Stock & Ready to Ship
$656.77
Engine Carburetor; Race Series Model; Gas; 750 CFM; Mechanical Secondaries
Engine Carburetor; Race Series Model; Gas; 750 CFM Dual Inlet 4-Barrel With Mechanical Secondaries; Square Type Bore Mount; Billet Aluminum Main Body and Fuel Bowls; Features Down-Leg Boosters and A Tumble Polished Finish; No Choke
Product Attributes:
Air Bleed Material:Brass
Air Bleed Size (Inner High Speed):35 / 35
Air Bleed Size (Outer Idle):70 / 70
Air Bleeds Included:Yes
Base Plate Material:Billet Aluminum
Booster Style:Down-leg Boosters
Calibration:Universal
Category:Carbs
CFM:750 Cfm
Choke:No Choke
Discharge Nozzle Size (Primary / Secondary):.031 In. / .031 In.
EGR:Without Egr
Emissions:49 State Legal
Feature/Benefit:Lightweight Aluminum Construction
Flange Style:Square Bore
Ford Kickdown Bracket Included:No
Fuel:Gasoline
Fuel Inlet:Dual
Fuel Inlet Thread:7/8-in. X20
Fuel Line Inlet Distance:9-11/16 Inch
Idle/High Speed Air Bleed Sizes:70 / 35
Main Body Material:Lightweight Aluminum
Metering Block Material:Billet Aluminum
Needle & Seat:110
Number of Barrels:4
Part Type:Carburetor
Primary Main Jet Size:74 / .078
Primary Power Valve (Hg):4.5
Prop 65 - Short Label:Warning: Cancer And Reproductive Harm
Prop 65 (C, R or CR):Cr
Prop 65 Warning Chemical Listing:Lead
Prop 65 Warning Label:Prop65 Warning C And R.jpg
Secondaries:Mechanical Secondaries
Secondary Main Jet Size:83 / .093
Throttle Linkage:Universal
Next Gen Race Series Carbs are HERE! PROFORM is taking its popular carburetors and making them even better! Here are the NEW Features: Main Body: Completely new main body design with contoured venturis and new 2-step down-leg boosters. The combination creates better air flow and increased fuel atomization! Fuel Bowls: Completely new design with increased internal baffling and a lower fuel ramp. The metering blocks also have a new baffle designed to work in conjunction with the bowl baffles to reduce fuel slosh and increase control. Throttle Base Plate: Slabbed shafts for increased airflow are now standard! In addition to these new features are all the great features that define the Race Series from the competition. Hand assembled and dyno tested in the U.S.A. by racers for racers! All PROFORM Race Series Carbs include the following: PROFORM's innovative all-aluminum next-gen main body with adjustable screw-in air bleeds and torx head squirters. Billet aluminum throttle base plate that is fully adjustable for fine tuning, and won't warp. The throttle lever is compatible with Ford kickdown bracketry, and the secondary opening rate can be adjusted with a linkage kit (sold separately). The billet aluminum metering blocks have a new fuel baffle design that integrates with the fuel bowl float for better fuel control. The metering blocks are fully adjustable as they always have been. Lastly, the aluminum fuel bowls with sight glass windows and billet fittings are a new design that is optimized with new features for better fuel control and easy float setting.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Carburetor Proform
P311-57AC03467301New
Qty:
In Stock & Ready to Ship
$702.93
Black Race Series Carburetor; 650 CFM, Mechanical Secondary, Black & Purple
Engine Carburetor; Black Race Series Model; 650 CFM Dual Inlet 4-Barrel With Mechanical Secondaries; Square Type Bore Mount; Features Down-Leg Boosters and Black Diamond Finish; No Choke; Assembled With 100% New Components; Sold Each
Product Attributes:
Air Bleed Material:Brass
Air Bleed Size (Inner High Speed):35 / 35
Air Bleed Size (Outer Idle):73 / 73
Air Bleeds Included:Yes
Base Plate Material:Billet Aluminum
Booster Style:Down-leg Boosters
Calibration:Universal
Category:Carbs
CFM:650 Cfm
Choke:No Choke
Discharge Nozzle Size (Primary / Secondary):.031 In. / .031 In.
EGR:Without Egr
Emissions:49 State Legal
Feature/Benefit:Lightweight Aluminum Construction
Flange Style:Square Bore
Ford Kickdown Bracket Included:Yes
Fuel:Gasoline
Fuel Inlet:Dual
Fuel Inlet Thread:7/8-in. X20
Fuel Line Inlet Distance:9-11/16 Inch
Idle/High Speed Air Bleed Sizes:73 / 35
Main Body Material:Lightweight Aluminum
Metering Block Material:Billet Aluminum
Needle & Seat:110
Number of Barrels:4
Part Type:Carburetor
Primary Main Jet Size:71 / .075
Primary Power Valve (Hg):4.5
Prop 65 - Short Label:Warning: Cancer And Reproductive Harm
Prop 65 (C, R or CR):Cr
Prop 65 Warning Chemical Listing:Lead
Prop 65 Warning Label:Prop65 Warning C And R.jpg
Secondaries:Mechanical Secondaries
Secondary Main Jet Size:78 / .084
Throttle Linkage:Universal
Based on the wildly popular original Race Series carburetors, PROFORM's Black Race Series Carburetors include a Black Diamond coating for enhanced fuel cooling. Each carburetor is hand assembled and tested in the U.S. utilizing the PROFORM High-Flow Carburetor Main Body, durable billet metering blocks, high performance billet throttle baseplate, and lightweight aluminum fuel bowls. PROFORM Black Race Series Carbs include: (1) Adjustable High-Flow Aluminum Main Body with Screw-In Air Bleeds, Maximum Air Flow: No Air Horn, Choke Tower, or Choke Control, Uses standard service and tuning components! (2) Billet Throttle Base Plates: Adjustable Secondary Air Flow Cam Bracket, Solid Billet Construction, Manufactured in the U.S.A., Timed and Full Vacuum Tubes for Accessories and Tuning, Button Torx Head Throttle Plate Screws, Power Valve Blow Out Protection, Progressive Slip Link Mechanical Secondary Linkage, Serviceable Throttle Levers, and Ford Kickdown! (3) Billet Metering Blocks: Solid Billet Construction, Durable, No Warping or Porosity Problems, Changeable Idle Feed Restriction, Manufactured in the U.S.A.! (4) Aluminum Fuel Bowls: Lightweight Aluminum, Sight Glass Windows for easy float adjustment!
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Carburetor Proform
P311-215864D67303New
Qty:
In Stock & Ready to Ship
$797.69
Black Race Series Carburetor; 850 CFM, Mechanical Secondary, Black & Purple
Engine Carburetor; Black Race Series Model; 850 CFM Dual Inlet 4-Barrel With Mechanical Secondaries; Square Type Bore Mount; Features Down-Leg Boosters and Black Diamond Finish; No Choke; Assembled With 100% New Components; Sold Each
Product Attributes:
Air Bleed Material:Brass
Air Bleed Size (Inner High Speed):35 / 35
Air Bleed Size (Outer Idle):70 / 70
Air Bleeds Included:Yes
Base Plate Material:Billet Aluminum
Booster Style:Down-leg Boosters
Calibration:Universal
Category:Carbs
CFM:850 Cfm
Choke:No Choke
Discharge Nozzle Size (Primary / Secondary):.033 In. / .033 In.
EGR:Without Egr
Emissions:49 State Legal
Feature/Benefit:Lightweight Aluminum Construction
Flange Style:Square Bore
Ford Kickdown Bracket Included:Yes
Fuel:Gasoline
Fuel Inlet:Dual
Fuel Inlet Thread:7/8-in. X20
Fuel Line Inlet Distance:9-11/16 Inch
Idle/High Speed Air Bleed Sizes:70 / 35
Main Body Material:Lightweight Aluminum
Metering Block Material:Billet Aluminum
Needle & Seat:120
Number of Barrels:4
Part Type:Carburetor
Primary Main Jet Size:78 / .084
Primary Power Valve (Hg):4.5
Prop 65 - Short Label:Warning: Cancer And Reproductive Harm
Prop 65 (C, R or CR):Cr
Prop 65 Warning Chemical Listing:Lead
Prop 65 Warning Label:Prop65 Warning C And R.jpg
Secondaries:Mechanical Secondaries
Secondary Main Jet Size:87.5 / .099
Throttle Linkage:Universal
Based on the wildly popular original Race Series carburetors, PROFORM's Black Race Series Carburetors include a Black Diamond coating for enhanced fuel cooling. Each carburetor is hand assembled and tested in the U.S. utilizing the PROFORM High-Flow Carburetor Main Body, durable billet metering blocks, high performance billet throttle baseplate, and lightweight aluminum fuel bowls. PROFORM Black Race Series Carbs include: (1) Adjustable High-Flow Aluminum Main Body with Screw-In Air Bleeds, Maximum Air Flow: No Air Horn, Choke Tower, or Choke Control, Uses standard service and tuning components. (2) Billet Throttle Base Plates: Adjustable Secondary Air Flow Cam Bracket, Solid Billet Construction, Manufactured in the U.S.A., Timed and Full Vacuum Tubes for Accessories and Tuning, Button Torx Head Throttle Plate Screws, Power Valve Blow Out Protection, Progressive Slip Link Mechanical Secondary Linkage, Serviceable Throttle Levers, and Ford Kickdown. (3) Billet Metering Blocks: Solid Billet Construction, Durable, No Warping or Porosity Problems, Changeable Idle Feed Restriction, Manufactured in the U.S.A. (4) Aluminum Fuel Bowls: Lightweight Aluminum, Sight Glass Windows for easy float adjustment.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Carburetor Proform
P311-010568C67305New
Qty:
In Stock & Ready to Ship
$820.88
Black Race Series Carburetor; 1050 CFM, Mechanical Secondary, Black & Purple
Engine Carburetor; Black Race Series Model; 1050 CFM Dual Inlet 4-Barrel With Mechanical Secondaries; Square Type Bore Mount; Features Down-Leg Boosters and Black Diamond Finish; No Choke; Assembled With 100% New Components; Sold Each
Product Attributes:
Air Bleed Material:Brass
Air Bleed Size (Inner High Speed):31 / 31
Air Bleed Size (Outer Idle):70 / 70
Air Bleeds Included:Yes
Base Plate Material:Billet Aluminum
Booster Style:Down-leg Boosters
Calibration:Universal
Category:Carbs
CFM:1050 Cfm
Choke:No Choke
Discharge Nozzle Size (Primary / Secondary):.035 In. / .035 In.
EGR:Without Egr
Emissions:49 State Legal
Feature/Benefit:Lightweight Aluminum Construction
Flange Style:Square Bore
Ford Kickdown Bracket Included:Yes
Fuel:Gasoline
Fuel Inlet:Dual
Fuel Inlet Thread:7/8-in. X20
Fuel Line Inlet Distance:9-11/16 Inch
Idle/High Speed Air Bleed Sizes:70 / 31
Main Body Material:Lightweight Aluminum
Metering Block Material:Billet Aluminum
Needle & Seat:130
Number of Barrels:4
Part Type:Carburetor
Primary Main Jet Size:87.5 / .099
Primary Power Valve (Hg):4.5
Prop 65 - Short Label:Warning: Cancer And Reproductive Harm
Prop 65 (C, R or CR):Cr
Prop 65 Warning Chemical Listing:Lead
Prop 65 Warning Label:Prop65 Warning C And R.jpg
Secondaries:Mechanical Secondaries
Secondary Main Jet Size:91 / .104
Throttle Linkage:Universal
Based on the wildly popular original Race Series carburetors, PROFORM's Black Race Series Carburetors include a Black Diamond coating for enhanced fuel cooling. Each carburetor is hand assembled and tested in the U.S. utilizing the PROFORM High-Flow Carburetor Main Body, durable billet metering blocks, high performance billet throttle baseplate, and lightweight aluminum fuel bowls. PROFORM Black Race Series Carbs include: (1) Adjustable High-Flow Aluminum Main Body with Screw-In Air Bleeds, Maximum Air Flow: No Air Horn, Choke Tower, or Choke Control, Uses standard service and tuning components! (2) Billet Throttle Base Plates: Adjustable Secondary Air Flow Cam Bracket, Solid Billet Construction, Manufactured in the U.S.A., Timed and Full Vacuum Tubes for Accessories and Tuning, Button Torx Head Throttle Plate Screws, Power Valve Blow Out Protection, Progressive Slip Link Mechanical Secondary Linkage, Serviceable Throttle Levers, and Ford Kickdown! (3) Billet Metering Blocks: Solid Billet Construction, Durable, No Warping or Porosity Problems, Changeable Idle Feed Restriction, Manufactured in the U.S.A.! (4) Aluminum Fuel Bowls: Lightweight Aluminum, Sight Glass Windows for easy float adjustment!
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Carburetor Proform
P311-025A93367304New
Qty:
In Stock & Ready to Ship
$800.22
Black Race Series Carburetor; 950 CFM, Mechanical Secondary, Black & Purple
Engine Carburetor; Black Race Series Model; 950 CFM Dual Inlet 4-Barrel With Mechanical Secondaries; Square Type Bore Mount; Features Down-Leg Boosters and Black Diamond Finish; No Choke; Assembled With 100% New Components; Sold Each
Product Attributes:
Air Bleed Material:Brass
Air Bleed Size (Inner High Speed):33 / 33
Air Bleed Size (Outer Idle):70 / 70
Air Bleeds Included:Yes
Base Plate Material:Billet Aluminum
Booster Style:Down-leg Boosters
Calibration:Universal
Category:Carbs
CFM:950 Cfm
Choke:No Choke
Discharge Nozzle Size (Primary / Secondary):.033 In. / .033 In.
EGR:Without Egr
Emissions:49 State Legal
Feature/Benefit:Lightweight Aluminum Construction
Flange Style:Square Bore
Ford Kickdown Bracket Included:Yes
Fuel:Gasoline
Fuel Inlet:Dual
Fuel Inlet Thread:7/8-in. X20
Fuel Line Inlet Distance:9-11/16 Inch
Idle/High Speed Air Bleed Sizes:70 / 33
Main Body Material:Lightweight Aluminum
Metering Block Material:Billet Aluminum
Needle & Seat:120
Number of Barrels:4
Part Type:Carburetor
Primary Main Jet Size:79 / .086
Primary Power Valve (Hg):4.5
Prop 65 - Short Label:Warning: Cancer And Reproductive Harm
Prop 65 (C, R or CR):Cr
Prop 65 Warning Chemical Listing:Lead
Prop 65 Warning Label:Prop65 Warning C And R.jpg
Secondaries:Mechanical Secondaries
Secondary Main Jet Size:88 / .100
Throttle Linkage:Universal
Based on the wildly popular original Race Series carburetors, PROFORM's Black Race Series Carburetors include a Black Diamond coating for enhanced fuel cooling. Each carburetor is hand assembled and tested in the U.S. utilizing the PROFORM High-Flow Carburetor Main Body, durable billet metering blocks, high performance billet throttle baseplate, and lightweight aluminum fuel bowls. PROFORM Black Race Series Carbs include: (1) Adjustable High-Flow Aluminum Main Body with Screw-In Air Bleeds, Maximum Air Flow: No Air Horn, Choke Tower, or Choke Control, Uses standard service and tuning components! (2) Billet Throttle Base Plates: Adjustable Secondary Air Flow Cam Bracket, Solid Billet Construction, Manufactured in the U.S.A., Timed and Full Vacuum Tubes for Accessories and Tuning, Button Torx Head Throttle Plate Screws, Power Valve Blow Out Protection, Progressive Slip Link Mechanical Secondary Linkage, Serviceable Throttle Levers, and Ford Kickdown! (3) Billet Metering Blocks: Solid Billet Construction, Durable, No Warping or Porosity Problems, Changeable Idle Feed Restriction, Manufactured in the U.S.A.! (4) Aluminum Fuel Bowls: Lightweight Aluminum, Sight Glass Windows for easy float adjustment!
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.