P311-5D6BB38 1411 New
- Reman; 4 bbl; 750cfm; Square Flange 4150; Electric Choke; Single Fuel Inlet Capability; Gasoline; Mechanical Secondary w/Velocity Air Valve Universal Throttle Linkage Type; Satin Finish; Non-EGR Compatible~Calibrated For Fuel Economy With Performance~For Use On Pre-Pollution Controlled Vehicles (PPCV)~Not For Computer Controlled Vehicles~Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~New Fuel Filter Between Fuel Pump And Carb Is Required~Adpt. PN2696 Or Kit PN2697 Is Required~Proper Installation Is The Responsibility Of Installer; May Void Warranty~Adpt. PN2732 Must Be Used When Installing On Certain Intakes
- CARB; PERFORMER; 750 CFM; ELECTRIC CHOKE
- Performer Series Carburetor
- Product Attributes:
-
- Barrel: Oem
- CFM: Oem
- Choke: Oem
- Emission: Oem
- Flange: Oem
- Primary Power Valve: N/a
- Throttle Bore: 1.562 In.
- Usage: Oem
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
-
Features:
- Bolts On And Runs Right Out of The Box
- Dependable Street Performance/Smooth Throttle Response
- Factory Set Float Levels
- Adjustments Are Rarely Needed
- 2-Piece Design Means No Gaskets Below The Fuel Level
- Installation And Tuning DVD Included With Every New Carb
- Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain
- Includes Both Timed And Full Vacuum Ports For Ignition Advance
- Designed For Stock To Performer Lever Engines
- Match With A Variety of Manifolds
- Made In The U.S.A.
- The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1411 Performer Series 750 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.