P311-26DAA37 W0133-1633924 New
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- ; 5 Degrees Offset Woodruff Key 1.3mm = 10 deg. at crank Offset woodruff key for correction of cam timing. An offset by one tooth on the cam sprocket results in approx. 18 degrees on the crankshaft. An offset to the right(in the direction of rotation) results in an earlier valve opening, while an offset to the left results in a later valve opening.
- 5 Degrees