Finish Selecting Your Vehicle

Choose your Engine for your 1968 Chrysler Newport

  • 8 Cyl 6.3L
  • 8 Cyl 7.2L

Shop By Brand

The Following brands are available based on your search.

  • Edelbrock
    Edelbrock
  • FAST
    FAST
  • Ford Performance
    Ford Performance
  • Holley
    Holley
  • Racing Head Service (RHS)
    Racing Head Service (RHS)
  • Weiand
    Weiand

Showing Products For 1968 Chrysler Newport Engine Intake Manifold

Below are all the different brands and applications for 1968 Chrysler Newport Engine Intake Manifold

Showing 1 - 10 of 143 Products for Engine Intake Manifold.

Refine Your Search

Weiand
1968 Chrysler Newport Engine Intake Manifold - Lower 8 Cyl 6.3L Weiand - Action +Plus Intake Manifold

P311-141F0F6    8008WND  New

Qty:
In Stock & Ready to Ship
$438.64
Weiand Engine Intake Manifold  Lower
  • Power Band Idle-6000 RPM; Low Rise; Square Bore Carb. Mounting Flange; 3.62 in. Front H/4.00 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; Low Rise; Square Bore Carb. Mounting Flange; 3.62 in. Front H/4.00 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine: Chrysler Big Block V8
    • Engine Make/Size: Chrysler Big Block V8
    • Front Height: 3.620 In.
    • Fuel System Type: Carb
    • Manifold Type: Low Rise
    • RPM Range: Idle-6000
    • Usage: Street/strip
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Port Size 2.14 in. Height x 1.11 in. Width
    • Height Front 3.62 in.
    • Rear 4.00 in.
    • Medium Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • Action +Plus Intake Manifold 361, 383, 400 V8This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Engine VIN Position Block Engine CID CC
1968 - Chrysler Newport H Lower V 8 Cyl 6.3L 383 6286
Weiand
1968 Chrysler Newport Engine Intake Manifold - Lower 8 Cyl 6.3L Weiand - Action +Plus Intake Manifold

P311-141F0F6    8008WND  New

Qty:
In Stock & Ready to Ship
$438.64
Weiand Engine Intake Manifold  Lower
  • Power Band Idle-6000 RPM; Low Rise; Square Bore Carb. Mounting Flange; 3.62 in. Front H/4.00 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; Low Rise; Square Bore Carb. Mounting Flange; 3.62 in. Front H/4.00 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine: Chrysler Big Block V8
    • Engine Make/Size: Chrysler Big Block V8
    • Front Height: 3.620 In.
    • Fuel System Type: Carb
    • Manifold Type: Low Rise
    • RPM Range: Idle-6000
    • Usage: Street/strip
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Port Size 2.14 in. Height x 1.11 in. Width
    • Height Front 3.62 in.
    • Rear 4.00 in.
    • Medium Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • Action +Plus Intake Manifold 361, 383, 400 V8This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1968 - Chrysler Newport Lower V 8 Cyl 6.3L 383 6286
Edelbrock
1968 Chrysler Newport Engine Intake Manifold 8 Cyl 7.2L Edelbrock - Dual-Quad Intake Manifold

P311-1C62A25    2475  New

Qty:
In Stock & Ready to Ship
$640.44
Edelbrock Engine Intake Manifold
  • Edelbrock CH-6B Six-Pack Intake Manifold for Chrysler RB Series Engines
  • 2500-6500 rpm CH-6B Chrysler 6-Pack Non-EGR For 3x2 bbl Carbs Replacement For Chrysler 6-Pack PN[04529056]~ Recommend Edelbrock Gasket PN[7225] for Manifold Gasket~ Stock Replacement Part
  • Edelbrock CH-6B Chrysler 6-Pack Intake Manifold for Chrysler 413-426-440 Big-Block V8 is Designed for "RB" (Wedge) Engines with 3 x 2-barrel Carburetors. Will not fit 1962-1964 Max-Wedge Cylinder Heads. Accepts 3x OEM 2-bbl Carbs. Non-EGR
  • Dual-Quad Intake Manifold
  • Product Attributes:
    • Basic Operating RPM Range: 2500-6500
    • Center Maximum Height: 5.250
    • CNC Ported: No
    • EGR Port: No
    • Flange Type: 2-barrel 4-bolt
    • Front Maximum Height: 4.875
    • Gasket Or Seal Included: No
    • Grade Type: Performance
    • Rear Maximum Height: 5.630
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Single Or Dual Plane Type: Dual
    • Vehicle Model: Chrysler
  • 1968-71. This manifold was original equipment on Chrysler 440 Six-Pack engines, Chrysler #P4529056. Will not fit 1962-64 Max Wedge heads. The Edelbrock CH-6B Chrysler 6-pack intake manifold is machined for the OEM 3x2-bbl 4-bolt carburetors.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Engine Version Block Engine CID CC
1968 - Chrysler Newport U/K V 8 Cyl 7.2L 440 7211
Edelbrock
1968 Chrysler Newport Engine Intake Manifold 8 Cyl 6.3L Edelbrock - Performer 383 Intake Manifold

P311-29C3EE2    2186  New

Qty:
In Stock & Ready to Ship
$444.32
Edelbrock Engine Intake Manifold
  • Performer 383 Intake Manifold for 1958-1979 Chrysler, B Series Engines
  • Satin Finish EGR/Non-EGR Idle-5500 rpm For 4 bbl Carbs Recommend Edelbrock Gasket PN[7225] for Manifold Gasket~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles
  • Non-EGR. Works with EGR for 1972-78 400cid with OEM 4-bbl. carb.
  • Performer 383 Intake Manifold
  • Product Attributes:
    • Basic Operating RPM Range: Idle-5500
    • Center Maximum Height: 4.000
    • CNC Ported: No
    • EGR Port: With Or Without
    • Flange Type: 4150
    • Front Maximum Height: 3.650
    • Gasket Or Seal Included: No
    • Grade Type: Performance
    • Rear Maximum Height: 4.350
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Single Or Dual Plane Type: Dual
    • Vehicle Model: Chrysler
  • Edelbrock part #2186 Performer 383 intake manifold is designed for street 361-383-400 c.i.d. Chrysler V8's that measure 7.75" across block. May be used with OEM or aftermarket carbs. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Engine Version Block Engine CID CC
1968 - Chrysler Newport U/K V 8 Cyl 6.3L 383 6286
Edelbrock
1968 Chrysler Newport Engine Intake Manifold 8 Cyl 7.2L Edelbrock - CH-28 Dual-Quad Intake Manifold

P311-25A7149    5440  New

Qty:
In Stock & Ready to Ship
$574.54
Edelbrock Engine Intake Manifold
  • CH-28 Chrysler Big Block RB Dual-Quad Intake Manifold
  • 1500-6000 rpm Non-EGR Use Edelbrock Camshaft Kit PN[2192] For Low-Torque Needs~ Use Edelbrock Camshaft Kit PN[5092] For Top-End Power~ Recommend Edelbrock Gasket PN[7225] for Manifold Gasket~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles
  • Edelbrock CH-28 Dual-Quad Intake Manifold for Chrysler 413-426-440 Big-Block V8
  • CH-28 Dual-Quad Intake Manifold
  • Product Attributes:
    • Basic Operating RPM Range: 1500-6000
    • Center Maximum Height: 4.660
    • CNC Ported: No
    • EGR Port: No
    • Flange Type: 4150 Dual-quad (4-barrel Square Bore)
    • Front Maximum Height: 4.450
    • Gasket Or Seal Included: No
    • Grade Type: Performance
    • Rear Maximum Height: 4.880
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Single Or Dual Plane Type: Dual
    • Vehicle Model: Chrysler
  • Edelbrock part #5440 Chrysler CH-28 Dual-Quad intake manifold is designed for 413-426-440 c.i.d. Chrysler V8's. Use with Performer-Plus cam #2192 for low-end torque or Performer RPM cam #7194 for top-end power. Will not fit 1962-64 Max Wedge heads. Carb center to carb center: 6-7/16". Manifold measures 8.75" across block.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Engine Version Block Engine CID CC
1968 - Chrysler Newport U/K V 8 Cyl 7.2L 440 7211
Edelbrock
1968 Chrysler Newport Engine Intake Manifold 8 Cyl 7.2L Edelbrock - Performer Series RPM Intake Manifold

P311-04E065A    7193  New

Qty:
In Stock & Ready to Ship
$427.97
Edelbrock Engine Intake Manifold
  • Performer RPM Big Block Chrysler RB Intake Manifold
  • Satin Finish 4 bbl Carb Non-EGR 1500-6500rpm Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles
  • Edelbrock Performer RPM Intake Manifold for Chrysler 413-426-440 Big-Block V8
  • Performer Series RPM Intake Manifold
  • Product Attributes:
    • Basic Operating RPM Range: 1500-6500
    • Center Maximum Height: 5.350
    • CNC Ported: No
    • EGR Port: No
    • Flange Type: 4150
    • Front Maximum Height: 4.900
    • Gasket Or Seal Included: No
    • Grade Type: Performance
    • Rear Maximum Height: 5.800
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Single Or Dual Plane Type: Dual
    • Vehicle Model: Chrysler
  • Edelbrock part #7193 Performer RPM 440 intake manifold is designed for 413-426-440 c.i.d. Chrysler V8 applications. The dual-plane design results in excellent low-rpm torque and outstanding high-rpm hp. For high-performance street/strip applications.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Engine Version Block Engine CID CC
1968 - Chrysler Newport U/K V 8 Cyl 7.2L 440 7211
Edelbrock
1968 Chrysler Newport Engine Intake Manifold 8 Cyl 7.2L Edelbrock - Performer 440 Intake Manifold

P311-35FFE67    2191  New

Qty:
In Stock & Ready to Ship
$407.64
Edelbrock Engine Intake Manifold
  • Performer 440 Intake Manifold for Chrysler, RB Series 413-440 Engines
  • EGR/Non-EGR Idle-5500 rpm For 4 bbl Carbs Recommend Edelbrock Gasket PN[7225] for Manifold Gasket~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles
  • Non-EGR. Works with EGR for 1972-79 440 V8s with OEM 4-bbl. carb. Will not fit 1962-64 Max Wedge Heads
  • Performer 440 Intake Manifold
  • Product Attributes:
    • Basic Operating RPM Range: Idle-5500
    • Center Maximum Height: 4.300
    • CNC Ported: No
    • EGR Port: With Or Without
    • Flange Type: 4150
    • Front Maximum Height: 3.800
    • Gasket Or Seal Included: No
    • Grade Type: Performance
    • Rear Maximum Height: 4.800
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Single Or Dual Plane Type: Dual
    • Vehicle Model: Chrysler
  • Edelbrock part #2191 Performer 440 intake manifold is designed for street 413-426-440 c.i.d. Chrysler V8's that measure 8.75" across block. Will not fit 1962-64 Max Wedge heads. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Engine Version Block Engine CID CC
1968 - Chrysler Newport U/K V 8 Cyl 7.2L 440 7211
Racing Head Service (RHS)
Engine Intake Manifold Racing Head Service (RHS)

P311-0B981AA    11903-KIT  New

Qty:
In Stock & Ready to Ship
$822.06
Racing Head Service (RHS) Engine Intake Manifold
  • Dominator Flange EFI Single Plane Intake with Fuel Rails for Chevrolet Big Block
  • Offering excellent performance for drag race and marine Chevrolet Big Blocks, this EFI manifoldrail kit delivers excellent flow, throttle response and torque. The RHS 24 Degree Manifold provides a distinct advantage over the competition.
  • Product Attributes:
    • Basic Operating RPM Range: 3000-8000
    • Bolt Centerline to Port Floor: 1.15
    • Bolt Hole Centerline to Port Roof: 1.34
    • Carb Angle: 0
    • Carb Height: 7.46
    • Carburetor Mounting Pattern: 4500/dominator
    • Center Maximum Height: 7.46
    • CNC Ported: No
    • EGR?: No
    • Finish: Natural
    • Front Maximum Height: 2.81
    • Fuel Rail End Type: -8 An Female O-ring
    • Gasket Or Seal Included: No
    • Grade Type: Performance
    • Includes Fuel Rails?: Yes
    • Injectors Included?: No
    • Intake Port Height: 2.49
    • Intake Port Width: 1.71
    • Long Fuel Rail Stand Injector Compatibility: Ev1 Style
    • Long Fuel Rail Stand Length: 2.48
    • Material: Aluminum
    • Mounting Hole Diameter: 7/16 Slotted
    • Mounting Hole Quantity: 12
    • Multiport EFI Ready?: Yes
    • Nitrous Bosses?: No
    • Plenum Volume (including Runners): 268
    • Rear Maximum Height: 2.36
    • Short Fuel Rail Stand Injector Compatibility: Ls3 Style
    • Short Fuel Rail Stand Length: 1.4
    • Single Or Dual Plane Type: Single
    • Throttle Body Included?: No
  • These manifolds are designed for maximum airflow and power with a 4500 Dominator-style carburetor flange. Engineered to fit most 24-degree style race cylinder heads, RHS took additional efforts to ensure excellent port matching when paired with RHS Big Block Chevrolet cylinder heads. These manifolds are available in both carb and EFI versions and offer excellent performance for drag racing and marine applications. Featuring a single-plane design, they utilize individual runner dividers for excellent throttle response and exceptional torque. Available for both short and tall deck blocks, all versions utilize a standard BBC distributor – there is no need for a slip collar distributor or special distributor for tall deck engines. They feature auxiliary water ports, an integral water crossover and dual distributor hold-down pads. Ports for water lines are also provided at all four corners. RHS also teamed up with sister brand FAST to create a revolutionary EFI version of the manifold that features port angle optimized injector bung mounting and machining, which angles the injectors to point directly at the valve. In addition, the EFI manifolds feature integral sensor mounting points to improving function, fitment and packaging.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Racing Head Service (RHS)
Additional Fitment Information:
Vehicle
Weiand
Engine Intake Manifold Weiand

P311-2466FAB    7151WND  New

Qty:
In Stock & Ready to Ship
$718.45
Weiand Engine Intake Manifold
  • 6-71 / 8-71 SuperCharger Intake Manifold
  • 6-71 / 8-71 SuperCharger Intake Manifold; Lower; w/Rectangular Port Heads; Includes Rear Mounted Pop Off Plate; w/Boost Gauge Port; Satin Finish;
  • Product Attributes:
    • Blower Size:
      • 6-71
      • 8-71
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Chevy Big Block V8
    • RPM Range: N/a
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Easier Installation
    • Satin Finish
  • 6-71/8-71 Chevy B/B 396-502

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Weiand
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-17F6609    2504  New

Qty:
In Stock & Ready to Ship
$626.60
Edelbrock Engine Intake Manifold
  • Performer RPM 4V/Q-JET Marine Intake Manifold for 55-86 Small-Block Chevy
  • Performer RPM Q-JET Marine Intake Manifold For 1986 & Earlier Small-Block Chevrolet 262-400 V8's. All Cooling Water Passages are Lined with Brass to Prevent Corrosion. The Carb Pads Accept Either Q-Jet or Square-Bore Marine Carburetors
  • Product Attributes:
    • Basic Operating RPM Range: 1500-6500
    • Center Maximum Height: 4.720
    • CNC Ported: No
    • Cylinder Head Type: Standard
    • EGR Port: No
    • Emission: N/a
    • Engine Make/Size: Chevy Small Block (262-400)
    • Flange Type: 4150
    • Front Maximum Height: 4.200
    • Gasket Or Seal Included: No
    • Grade Type: Performance
    • Rear Maximum Height: 5.250
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • RPM Range: Idle -5500
    • Single Or Dual Plane Type: Dual
    • Usage: Oem
    • Vehicle Model: Chevrolet
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Cast Aluminum
    • Broad Powerband
  • Edelbrock part #2504 Performer RPM Q-Jet marine intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8's for spread-bore (Q-Jet) or square-bore carbs. This Performer RPM Q-Jet intake manifold is designed specifically for demanding marine applications and delivers maximum power and a broad torque curve for high-performance marine.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 143 Products for Engine Intake Manifold.