1963 Jaguar Mark X Differential Ring and Pinion Driveline and Axles - Dana Spicer Chassis, Eaton, Motive Gear, Yukon Gear

1963 Jaguar Mark X Differential Ring and Pinion - Rear Motive Gear - Differential Ring and Pinion

Part # P311-1332CB1 Manu # D44-307 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 22106-5X , 22106X , 24285 , 706017-1X , D44-308-NG , YG D44-308

Qty:

In Stock & Ready to Ship

Best Price: $290.99

For Dana 44; 3.07 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier
Motive Gear - Differential Ring and Pinion
Differential Ring and Pinion
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Cover Bolt Quantity: 10
- Differential Carrier Break: 3.73 Ratio And Lower
- Differential Case Design Type: Dana 44 Standard
- Pinion Gear Tooth Quantity: 14
- Pinion Shaft Diameter: 1.376
- Pinion Spline Count: 26
- Ring & Pinion Gear Ratio: 3.07
- Ring Gear Bolt Quantity: 10
- Ring Gear Diameter: 8.5
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Tooth Quantity: 43
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

Brand: Motive Gear

Position: Rear

Vehicle	Position
1963 - Jaguar Mark X	Rear

1963 Jaguar Mark X Differential Ring and Pinion - Rear Motive Gear - Differential Ring and Pinion

Part # P311-341D6C2 Manu # D44-456 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 1-2033-456 , 10001274 , 2-2033-456 , 22105-5X , 22105X , 24036 , 69-0218-1 , 706017-21X , 714A731J , D44-456-NG , D44456 , DS10001274 , SD4405 , YG D44-456

Qty:

In Stock & Ready to Ship

Best Price: $334.99

For Dana 44; 4.56 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
Motive Gear - Differential Ring and Pinion
Differential Ring and Pinion
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Cover Bolt Quantity: 10
- Differential Carrier Break: 3.92 Ratio And Higher
- Differential Case Design Type: Dana 44 Standard
- Pinion Gear Tooth Quantity: 11
- Pinion Shaft Diameter: 1.376
- Pinion Spline Count: 26
- Ring & Pinion Gear Ratio: 4.56
- Ring Gear Bolt Quantity: 10
- Ring Gear Diameter: 8.5
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Tooth Quantity: 50
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

Brand: Motive Gear

Position: Rear

Vehicle	Position
1963 - Jaguar Mark X	Rear

1963 Jaguar Mark X Differential Ring and Pinion - Rear Dana Spicer Chassis - SVL

Part # P311-15B9D9F Manu # 10005314 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $205.60

Differential Ring and Pinion
with 4.88 Gear Ratio with Dana Model 44 Axle
SVL
Product Attributes:
- Axle Model: Dana 44
- Axle Type: Semi Floating
- Carrier Breaks: 3.92 And Up
- Cover Bolt Quantity: 10
- Gear Ratio: 4.88
- Include Installation Kit: N
- On Vehicle Location: Front/rear
- Pinion Gear Included: Y
- Pinion Gear Tooth Quantity: 9
- Pinion Shaft Diameter: 1.377
- Pinion Spline Count: 26
- Ring Gear Bolt Qty: 10
- Ring Gear Bolt Thread In.: .375-24
- Ring Gear Diameter (In.): 8.500
- Ring Gear Included: Y
- Ring Gear Rotation: Standard
- Ring Teeth Count: 44
Count on SVL ring and pinion gearing to deliver the ideal blend of coverage, performance, and value for your vehicle. SVL gearing is engineered for all makes and ratios, and the processes that go into manufacturing SVL gearing make all the difference.

Brand: Dana Spicer Chassis

Position: Rear

Vehicle	Position
1963 - Jaguar Mark X	Rear

1963 Jaguar Mark X Differential Ring and Pinion - Front 6 Cyl 3.8L Yukon Gear - Ring And Pinion Gear Set

Part # P311-5A23250 Manu # YG D44-411 Condition: New

This Part Fits the Following OEM/Substitute Numbers: ZG D44-411

Qty:

In Stock & Ready to Ship

Best Price: $413.89

High performance Yukon Ring/Pinion replacement gear set for Dana 44 in a 4.11
Dana 44; 4.11 Ratio Dana 44; Jaguar; 4.11 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 4.11 Ratio; 26 Spline Pinion; Fits 4 Series Carrier
Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
Ring And Pinion Gear Set
Product Attributes:
- Axle Type: Dana 44
- Gear Ratio: 4.11
- WARNING CA Proposition 65: No
Features:
- Fits Standard Rotation Dana Spicer 44
- 26 Spline Pinion
- 4.11 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.

Brand: Yukon Gear

Position: Front

Vehicle	Position	Block	Engine	CID	CC
1963 - Jaguar Mark X	Front	L	6 Cyl 3.8L	231	3781

1963 Jaguar Mark X Differential Ring and Pinion - Rear 6 Cyl 3.8L Yukon Gear - Ring And Pinion Gear Set

Part # P311-1277DD3 Manu # YG D44-373 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $413.89

High performance Yukon Ring/Pinion replacement gear set for Dana 44 in a 3.73
Dana 44; 3.73 Ratio Dana 44; Jaguar; 3.73 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.73 Ratio; 26 Spline Pinion; Fits 3 Series Carrier
Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
Ring And Pinion Gear Set
Product Attributes:
- Axle Type: Dana 44
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
Features:
- Fits Standard Rotation Dana Spicer 44
- 26 Spline Pinion
- 3.73 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.

Brand: Yukon Gear

Position: Rear

Vehicle	Position	Block	Engine	CID	CC
1963 - Jaguar Mark X	Rear	L	6 Cyl 3.8L	231	3781

1963 Jaguar Mark X Differential Ring and Pinion - Rear 6 Cyl 3.8L Yukon Gear - Ring And Pinion Gear Set

Part # P311-5A23250 Manu # YG D44-411 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $413.89

High performance Yukon Ring/Pinion replacement gear set for Dana 44 in a 4.11
Dana 44; 4.11 Ratio Dana 44; Jaguar; 4.11 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 4.11 Ratio; 26 Spline Pinion; Fits 4 Series Carrier
Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
Ring And Pinion Gear Set
Product Attributes:
- Axle Type: Dana 44
- Gear Ratio: 4.11
- WARNING CA Proposition 65: No
Features:
- Fits Standard Rotation Dana Spicer 44
- 26 Spline Pinion
- 4.11 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.

Brand: Yukon Gear

Position: Rear

Vehicle	Position	Block	Engine	CID	CC
1963 - Jaguar Mark X	Rear	L	6 Cyl 3.8L	231	3781

1963 Jaguar Mark X Differential Ring and Pinion - Front 6 Cyl 3.8L Yukon Gear - Ring And Pinion Gear Set

Part # P311-1277DD3 Manu # YG D44-373 Condition: New

This Part Fits the Following OEM/Substitute Numbers: ZG D44-373

Qty:

In Stock & Ready to Ship

Best Price: $413.89

High performance Yukon Ring/Pinion replacement gear set for Dana 44 in a 3.73
Dana 44; 3.73 Ratio Dana 44; Jaguar; 3.73 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.73 Ratio; 26 Spline Pinion; Fits 3 Series Carrier
Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
Ring And Pinion Gear Set
Product Attributes:
- Axle Type: Dana 44
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
Features:
- Fits Standard Rotation Dana Spicer 44
- 26 Spline Pinion
- 3.73 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.

Brand: Yukon Gear

Position: Front

Vehicle	Position	Block	Engine	CID	CC
1963 - Jaguar Mark X	Front	L	6 Cyl 3.8L	231	3781

1963 Jaguar Mark X Differential Ring and Pinion - Rear 6 Cyl 3.8L Yukon Gear - Ring And Pinion Gear Set

Part # P311-1277DD3 Manu # YG D44-373 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $413.89

High performance Yukon Ring/Pinion replacement gear set for Dana 44 in a 3.73
Dana 44; 3.73 Ratio; 26 Spline Pinion; Standard Rotation; Fits 3 Series Carrier Dana 44; Jaguar; 3.73 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.73 Ratio; 26 Spline Pinion; Fits 3 Series Carrier
Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
Ring And Pinion Gear Set
Product Attributes:
- Axle Type: Dana 44
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
Features:
- Fits Standard Rotation Dana Spicer 44
- 26 Spline Pinion
- 3.73 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.

Brand: Yukon Gear

Position: Rear

Vehicle	Position	Block	Engine	CID	CC
1963 - Jaguar Mark X	Rear	L	6 Cyl 3.8L	231	3781

1963 Jaguar Mark X Differential Ring and Pinion - Front 6 Cyl 3.8L Yukon Gear - Ring And Pinion Gear Set

Part # P311-1277DD3 Manu # YG D44-373 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $413.89

High performance Yukon Ring/Pinion replacement gear set for Dana 44 in a 3.73
Dana 44; 3.73 Ratio; 26 Spline Pinion; Standard Rotation; Fits 3 Series Carrier Dana 44; Jaguar; 3.73 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.73 Ratio; 26 Spline Pinion; Fits 3 Series Carrier
Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
Ring And Pinion Gear Set
Product Attributes:
- Axle Type: Dana 44
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
Features:
- Fits Standard Rotation Dana Spicer 44
- 26 Spline Pinion
- 3.73 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.

Brand: Yukon Gear

Position: Front

Vehicle	Position	Block	Engine	CID	CC
1963 - Jaguar Mark X	Front	L	6 Cyl 3.8L	231	3781

1963 Jaguar Mark X Differential Ring and Pinion - Front 6 Cyl 3.8L Yukon Gear - Ring And Pinion Gear Set

Part # P311-5A23250 Manu # YG D44-411 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $413.89

High performance Yukon Ring/Pinion replacement gear set for Dana 44 in a 4.11
Dana 44; 4.11 Ratio; 26 Spline Pinion; Standard Rotation; Fits 4 Series Carrier Dana 44; Jaguar; 4.11 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 4.11 Ratio; 26 Spline Pinion; Fits 4 Series Carrier
Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
Ring And Pinion Gear Set
Product Attributes:
- Axle Type: Dana 44
- Gear Ratio: 4.11
- WARNING CA Proposition 65: No
Features:
- Fits Standard Rotation Dana Spicer 44
- 26 Spline Pinion
- 4.11 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.

Brand: Yukon Gear

Position: Front

Vehicle	Position	Block	Engine	CID	CC
1963 - Jaguar Mark X	Front	L	6 Cyl 3.8L	231	3781

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 1963 Jaguar Mark X Differential Ring and Pinion