Finish Selecting Your Vehicle

Choose your Submodel for your 1962 Chevrolet Chevy II

  • Base
  • Nova

Shop By Brand

The Following brands are available based on your search.

  • Airtex
    Airtex
  • Cardone
    Cardone
  • GMB
    GMB
  • Gates
    Gates

Showing Products For 1962 Chevrolet Chevy II Engine Water Pump

Below are all the different brands and applications for 1962 Chevrolet Chevy II Engine Water Pump

Showing 1 - 9 of 9 Products for Engine Water Pump.

Refine Your Search

GMB
1962 Chevrolet Chevy II Engine Water Pump - N/A 4 Cyl 2.5L GMB

P311-32109D0    130-1010  New

Qty:
$20.03
GMB Engine Water Pump  N/A
  • New Water Pump
  • OE Replacement
Brand: GMB
Position: N/A
Additional Fitment Information:
Vehicle Block CC CID Position
1962 - Chevrolet Chevy II L 2507 153 N/A
Airtex
1962 Chevrolet Chevy II Engine Water Pump 6 Cyl 3.2L Airtex

P311-4C33B97    AW895  New

Qty:
$20.39
Airtex Engine Water Pump
  • New Water Pump
Brand: Airtex
Additional Fitment Information:
Vehicle Block CC CID
1962 - Chevrolet Chevy II L 3180 194
Airtex
1962 Chevrolet Chevy II Engine Water Pump 6 Cyl 3.2L Airtex

P311-35B917E    AW895H  New

Qty:
$50.99
Airtex Engine Water Pump
  • New Water Pump
  • Optional Heavy Duty Aluminum Version
Brand: Airtex
Additional Fitment Information:
Vehicle Block CC CID
1962 - Chevrolet Chevy II L 3180 194
Cardone
1962 Chevrolet Chevy II Engine Water Pump 4 Cyl 2.5L Cardone

P311-29153AD    58-146  Remanufactured

Qty:
$20.59
Cardone Engine Water Pump
  • Remanufactured Water Pump
  • Reman. A-1 CARDONE Water Pump
  • Product Attributes:
    • Casting Number: 3788476, 328673/gm, 3293158gm, 9673gm116
    • Duty Rating: Standard
    • E-Waste: No
    • FAQs:
      • After Mounting The Pump On The Vehicle And Running The Engine, The Shaft Broke. The Shaft Was Blue. Does This Mean The Pump Burned Up?
      • Do I Need Identification Off Of The Original Pump To Get The Correct Replacement?
      • For Most Modern Vehicles, Knowing The Engine Size Is Sufficient To Locate The Correct Replacement Water Pump. However, With Some Older Passenger Vehicles And Medium Duty Applications, You May Need An Identification Number That Is Either Stamped On The Ori
      • I Just Replaced The Water Pump And My Engine Is Overheating. Is The Pump Defective?
      • The Engine Overheating Could Be Due To Components Other Than The Water Pump. The Following Steps Should Be Taken Before Checking The Pump. Flush The System. Check Hoses, Clamps And Seals. Check Radiator Cap And Thermostat. Check For Proper And Sufficient
      • The Impeller On My Original Pump Looks Pitted. Is This Caused By Cavitation?
      • The Pump Did Not Burn Up, However The Shaft Broke Due To A Stress Fracture Caused By: Excessively High Temperatures, Improperly Torqued Mounting Bolts, Bent Or Distorted Pulley(s), Cracked Fan Bent, Not Mounted Squarely, Defective Fan Clutch, Improperly T
      • Yes, The Mostly Likely Cause Is Cavitation. When Inlet Pressures Of A Water Pump Fall Below The Design Specifications Due To A Leak Or Inadequate Coolant Levels, Tiny Vapor Bubbles Can Form In The Coolant At The Center Of The Impeller. When Coolant Conta
    • Features and Benefits:
      • 100% Leak Testing And Hub-pull Testing Ensures Reliable Performance.
      • O.e.-supplied New Unitized Seals Ensure Long-lasting, Trouble-free Performance.
      • The Proper O.e. Specified Bearing Design Is Installed To Meet The Specific Radial And Axial Load Requirements Of Each Application. This Ensures Longer Bearing Life And Reliable Performance.
      • Thermostat Seal And Mounting Gasket Are Supplied For Ease Of Installation (where Applicable).
    • Gaskets Included: Yes
    • Hub Height (in): 3.88
    • Hub Height (mm): 98.43
    • Impeller Vane Quantity: 8
    • Material: Aluminum, Cast Iron, Steel
    • Mounting Hardware Included: No
    • Number of Hose Connectors: 2
    • Package Contents: Water Pump, Gaskets
    • Product Condition: Remanufactured
    • Pulley Included: No
    • Rotation: Clockwise
  • CARDONE Remanufactured Water Pumps are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-supplied unitized seals and application-specific bearings to ensure long-lasting, trouble-free product life. With 100% leak and hub-pull testing, CARDONE Remanufactured Water Pumps provide peace of mind for the long haul.
Brand: Cardone
Additional Fitment Information:
Vehicle Block CC CID Submodel
1962 - Chevrolet Chevy II L 2507 153 Nova
Cardone
1962 Chevrolet Chevy II Engine Water Pump 6 Cyl 3.2L Cardone

P311-2062827    58-130  Remanufactured

Qty:
$21.30
Cardone Engine Water Pump
  • Remanufactured Water Pump
  • Reman. A-1 CARDONE Water Pump
  • Product Attributes:
    • Casting Number: 3788476, 329673
    • Duty Rating: Standard
    • E-Waste: No
    • FAQs:
      • After Mounting The Pump On The Vehicle And Running The Engine, The Shaft Broke. The Shaft Was Blue. Does This Mean The Pump Burned Up?
      • Do I Need Identification Off Of The Original Pump To Get The Correct Replacement?
      • For Most Modern Vehicles, Knowing The Engine Size Is Sufficient To Locate The Correct Replacement Water Pump. However, With Some Older Passenger Vehicles And Medium Duty Applications, You May Need An Identification Number That Is Either Stamped On The Ori
      • I Just Replaced The Water Pump And My Engine Is Overheating. Is The Pump Defective?
      • The Engine Overheating Could Be Due To Components Other Than The Water Pump. The Following Steps Should Be Taken Before Checking The Pump. Flush The System. Check Hoses, Clamps And Seals. Check Radiator Cap And Thermostat. Check For Proper And Sufficient
      • The Impeller On My Original Pump Looks Pitted. Is This Caused By Cavitation?
      • The Pump Did Not Burn Up, However The Shaft Broke Due To A Stress Fracture Caused By: Excessively High Temperatures, Improperly Torqued Mounting Bolts, Bent Or Distorted Pulley(s), Cracked Fan Bent, Not Mounted Squarely, Defective Fan Clutch, Improperly T
      • Yes, The Mostly Likely Cause Is Cavitation. When Inlet Pressures Of A Water Pump Fall Below The Design Specifications Due To A Leak Or Inadequate Coolant Levels, Tiny Vapor Bubbles Can Form In The Coolant At The Center Of The Impeller. When Coolant Conta
    • Features and Benefits:
      • 100% Leak Testing And Hub-pull Testing Ensures Reliable Performance.
      • O.e.-supplied New Unitized Seals Ensure Long-lasting, Trouble-free Performance.
      • The Proper O.e. Specified Bearing Design Is Installed To Meet The Specific Radial And Axial Load Requirements Of Each Application. This Ensures Longer Bearing Life And Reliable Performance.
      • Thermostat Seal And Mounting Gasket Are Supplied For Ease Of Installation (where Applicable).
    • Gaskets Included: Yes
    • Hub Height (in): 4.44
    • Hub Height (mm): 112.73
    • Impeller Vane Quantity: 8
    • Material: Aluminum, Cast Iron, Steel
    • Mounting Hardware Included: No
    • Number of Hose Connectors: 2
    • Package Contents: Water Pump, Gaskets
    • Product Condition: Remanufactured
    • Pulley Included: No
    • Rotation: Clockwise
  • CARDONE Remanufactured Water Pumps are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-supplied unitized seals and application-specific bearings to ensure long-lasting, trouble-free product life. With 100% leak and hub-pull testing, CARDONE Remanufactured Water Pumps provide peace of mind for the long haul.
Brand: Cardone
Additional Fitment Information:
Vehicle Block CC CID Submodel
1962 - Chevrolet Chevy II L 3180 194 Base
Cardone
1962 Chevrolet Chevy II Engine Water Pump 6 Cyl 3.2L Cardone

P311-259B171    55-11134  New

Qty:
$37.71
Cardone Engine Water Pump
  • New Water Pump
  • New CARDONE SELECT Water Pump
  • Product Attributes:
    • Duty Rating: Standard
    • E-Waste: No
    • FAQs:
      • After Mounting The Pump On The Vehicle And Running The Engine, The Shaft Broke. The Shaft Was Blue. Does This Mean The Pump Burned Up?
      • Do I Need Identification Off Of The Original Pump To Get The Correct Replacement?
      • For Most Modern Vehicles, Knowing The Engine Size Is Sufficient To Locate The Correct Replacement Water Pump. However, With Some Older Passenger Vehicles And Medium Duty Applications, You May Need An Identification Number That Is Either Stamped On The Ori
      • I Just Replaced The Water Pump And My Engine Is Overheating. Is The Pump Defective?
      • The Engine Overheating Could Be Due To Components Other Than The Water Pump. The Following Steps Should Be Taken Before Checking The Pump. Flush The System. Check Hoses, Clamps And Seals. Check Radiator Cap And Thermostat. Check For Proper And Sufficient
      • The Impeller On My Original Pump Looks Pitted. Is This Caused By Cavitation?
      • The Pump Did Not Burn Up, However The Shaft Broke Due To A Stress Fracture Caused By: Excessively High Temperatures, Improperly Torqued Mounting Bolts, Bent Or Distorted Pulley(s), Cracked Fan Bent, Not Mounted Squarely, Defective Fan Clutch, Improperly T
      • Yes, The Mostly Likely Cause Is Cavitation. When Inlet Pressures Of A Water Pump Fall Below The Design Specifications Due To A Leak Or Inadequate Coolant Levels, Tiny Vapor Bubbles Can Form In The Coolant At The Center Of The Impeller. When Coolant Conta
    • Features and Benefits:
      • 100% Leak Testing And Hub-pull Testing Ensures Reliable Performance.
      • O.e.-supplied New Unitized Seals Ensure Long-lasting, Trouble-free Performance.
      • The Proper O.e. Specified Bearing Design Is Installed To Meet The Specific Radial And Axial Load Requirements Of Each Application. This Ensures Longer Bearing Life And Reliable Performance.
      • Thermostat Seal And Mounting Gasket Are Supplied For Ease Of Installation (where Applicable).
    • Gaskets Included: Yes
    • Hub Height (in): 4.43
    • Hub Height (mm): 112.52
    • Impeller Vane Quantity: 8
    • Material: Cast Iron
    • Mounting Hardware Included: No
    • Number of Hose Connectors: 4
    • Package Contents: Water Pump, Gaskets
    • Product Condition: New
    • Pulley Included: No
    • Rotation: Counter-clockwise
  • Building on decades of experience using reverse engineering to remanufacture automotive pumps, CARDONE engineers have meticulously designed our CARDONE New Water Pumps to match O.E. performance. Each unit is 100% leak and hub-pull tested to ensure reliability. Supplied with O.E.-grade unitized seals, CARDONE New Water Pumps provide O.E. performance you can rely on.
Brand: Cardone
Additional Fitment Information:
Vehicle Block CC CID Submodel
1962 - Chevrolet Chevy II L 3180 194 Nova
GMB
1962 Chevrolet Chevy II Engine Water Pump - N/A 4 Cyl 2.5L GMB

P311-130A27F    130-1010P  New

Qty:
$50.40
GMB Engine Water Pump  N/A
  • New Water Pump
  • High Performance
Brand: GMB
Position: N/A
Additional Fitment Information:
Vehicle Block CC CID Position
1962 - Chevrolet Chevy II L 2507 153 N/A
GMB
1962 Chevrolet Chevy II Engine Water Pump - N/A 6 Cyl 3.2L GMB

P311-0E9206E    130-2725  New

Qty:
$40.56
GMB Engine Water Pump  N/A
  • New Water Pump
Brand: GMB
Position: N/A
Additional Fitment Information:
Vehicle Block CC CID Position
1962 - Chevrolet Chevy II L 3180 194 N/A
Gates
1962 Chevrolet Chevy II Engine Water Pump 6 Cyl 3.2L Gates

P311-2412B82    42082  New

Qty:
$22.40
Gates Engine Water Pump
  • Water Pump (Standard)
  • Product Attributes:
    • Contents: Water Pump, Gasket
    • Drive Style: Accessory Belt
    • Housing: Cast Iron
    • Impeller Material: Stamped Steel
    • Includes Back Housing: No
    • Includes Thermostat & Housing: No
    • Number of Outlets: 2
    • Rotation of Impeller: Standard
    • Timing Belt Driven: No
Brand: Gates
Additional Fitment Information:
Vehicle Block CC CID Fuel Type
1962 - Chevrolet Chevy II L 3180 194 GAS

Showing 1 - 9 of 9 Products for Engine Water Pump.