1960 Chrysler New Yorker Engine Intake Manifold Engine - Edelbrock, FAST, Ford Performance, Holley, Racing Head Service (RHS), Weiand

Engine Intake Manifold Edelbrock

Part # P311-2E71029 Manu # 7524 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $733.30

Dual-Quad Chrysler Hemi Gen II Carbureted Intake Manifold
Edelbrock Dual-Quad Chrysler Gen II 426-572 HEMI Carbureted Intake Manifold
Product Attributes:
- Basic Operating RPM Range: 2500-6500
- Center Maximum Height: 5.100
- CNC Ported: No
- Cylinder Head Type: Standard
- EGR Port: No
- Emission: N/a
- Engine Make/Size: Mopar 426-572 Hemi
- Flange Type: 4150 Dual-quad
- Front Maximum Height: 4.680
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 5.510
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 2500-6500
- Single Or Dual Plane Type: Single
- Usage: Racing
- Vehicle Model: Chrysler
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Single-Plane Air-Gap Design
- Dual 4150 Style Carb Pads
- Compatible With Factory Cylinder Heads
Edelbrock part #7524 Dual-Quad HEMI intake manifold is intended for use with Mopar Gen II (1964-71) 426-572 HEMI engines operating in the 2,500 to 6,500+ range. This new intake manifold is a single-plane Air-Gap design with a dual square-bore 4150 style carburetor pad. Carburetor spacing and height are the same as Mopar Performance dual-quad #P5153737, making it a direct bolt-on to all vehicles with a shaker hood. They also retain the same carburetor linkage location from the factory. The Dual-Quad HEMI is compatible with factory style cylinder heads, but optimized for use with Edelbrock Victor Jr. HEMI cylinder heads. Requires Edelbrock Coil Bracket #8079 for use with OE style coils.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-357325C Manu # 2116 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $370.80

Performer Intake Manifold for Small-Block Chevy w/Vortec Heads
Edelbrock Performer Vortec Intake Manifold for all Small-Block Chevrolet 262-400 c.i.d Engines with 1996+ L31 Vortec Cylinder Heads & all Modern Marine and Industrial Engines. Accepts Q-Jet or 4150-Style Square-Bore Carburetors. Non-EGR
Product Attributes:
- Basic Operating RPM Range: Idle-5500
- Center Maximum Height: 4.570
- CNC Ported: No
- Cylinder Head Type: Gm Vortec/edelbrock E-tec
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block (262-400)
- Flange Type: 4150
- Front Maximum Height: 3.870
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 5.280
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: Idle -5500
- Single Or Dual Plane Type: Dual
- Usage: Street/hi-performance
- Vehicle Model: Chevrolet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Idle to 5500 RPM Street-Driven Performance
- Bright Silver Chrome Finish That Will Not Discolor
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- Designed for Engine Swaps Using GM Vortec Heads
- Works on Both Vortec and 1995 and Earlier Blocks
- Accepts Late Model Water Neck-Alternators-HEI-A/C
Edelbrock part #2116 Performer intake manifold is based on the popular and powerful Edelbrock #2101, this dual-plane intake is designed for the street rod, industrial and engine swap market utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or the Edelbrock E-Tec aluminum heads. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. Manifold has provisions for external water bypass and may be used on either Vortec blocks or 1995 and earlier blocks. No provision for exhaust heated chokes.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-3E75DDF Manu # 28001 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $885.73

Big Victor 2 Spread-Port Intake Manifold for Big-Block Chevy
Edelbrock Big Victor 2 Spread-Port Intake Manifold for Big-Block Chevrolet
Product Attributes:
- Basic Operating RPM Range: 3500-8500
- Center Maximum Height: 9.210
- CNC Ported: No
- Cylinder Head Type: Big Chief
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Chevy Big Block (396-502)
- Flange Type: 4500
- Front Maximum Height: 9.210
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 9.210
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 3500-8500
- Single Or Dual Plane Type: Single
- Usage: Racing
- Vehicle Model: Chevrolet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For 3500 to 8500 RPM High-Performance Engines
- For Large CID or High RPM Drag Racing Big Blocks
- Use with Dart Big Chief Cylinder Heads
- Require Port Matching and Can Use Oval Ports
- Better Top End Horsepower and Consistency
- Crisp Throttle Response off the Stop
- Use for 9.8 in. Deck Height Engines
- Use Appropriate 4500-Series Carburetor
Edelbrock part #28001 Big Victor 2 Spread-Port intake manifold is designed for large cubic-inch or high rpm drag racing big-blocks with Edelbrock Big Victor, Dart Big Chief or Brodix Big Duke cylinder heads, this manifold has an average runner area of approximately 4.75 sq. in. The port exits have been reduced to accommodate the wide variety of intake port sizes and require port matching. The runners have a minimum corner radius of .500" from the plenum to the exit allowing the popular oval port shape to be used. The outside runners are shorter and straighter than competitor's manifolds and the plenum is longer front to back. These features, combined with approximately 5% taper in runner cross-sectional area, give better top end horsepower while maintaining consistency and throttle response off the stop. All applications are equipped with a 4500 Series flange and will accept 2.25" throttle body butterflies without a spacer or modification.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-3E4BB73 Manu # 28215 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $926.17

Super Victor Small Block Chevy LS3 EFI 4500 Intake Manifold
Edelbrock Super Victor LS3 EFI 4500 Style Intake Manifold for Gen IV LS3
Product Attributes:
- Basic Operating RPM Range: 3500-7500
- Center Maximum Height: 7.670
- CNC Ported: No
- Cylinder Head Type: Ls3/l92
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Chevy Ls3
- Flange Type: 4500
- Front Maximum Height: 7.670
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 7.670
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 3500-7500
- Single Or Dual Plane Type: Single
- Usage: Racing
- Vehicle Model: Chevrolet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For 3500 to 7500 RPM High-Performance Engines
- Ideal For Drag Racing Or Marine Applications
- Use For Any Application Requiring Maximum Power
Edelbrock part #28215 Super Victor LS3 EFI intake manifold is designed for Gen IV LS engines equipped with LS3 cylinder heads. This new Super Victor intake manifold is ideal for anyone building a 700+ hp 4500 style EFI large displacement racing engine operating between 3,500 - 7,500 rpm. This Super Victor intake manifold is designed with 24% larger runners than our Victor Jr. #28455 along with a larger 4500 style plenum. The large plenum makes this intake manifold ideal for nitrous and forced induction applications. The manifold also features tapered runners for increased flow at high rpm. The Super Victor 4500 series manifolds can accommodate bores up 2.25". This Super Victor LS3 EFI intake manifold includes machined fuel injector bosses. A carburetor mounted style throttle bracket is recommended.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-485D60A Manu # 28905 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $843.59

Super Victor Small Block Chevy LS7 EFI Dominator Flange Intake Manifold
Edelbrock Super Victor LS7 EFI Dominator Flange Intake Manifold Gen IV 750HP+
Product Attributes:
- Basic Operating RPM Range: 3500-8000
- Center Maximum Height: 8.420
- CNC Ported: No
- Cylinder Head Type: Ls7
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Chevy Ls7
- Flange Type: 4500
- Front Maximum Height: 8.420
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 8.420
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 3500-8000
- Single Or Dual Plane Type: Single
- Usage: Racing
- Vehicle Model: Chevrolet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For 3500 to 7500 RPM High-Performance Engines
- Ideal For Drag Racing Or Marine Applications
- Use For Any Application Requiring Maximum Power
Edelbrock part #28095 Super Victor LS7 EFI intake manifold is designed for Gen IV LS engines equipped with LS7 cylinder heads or Edelbrock Pro-Port Victor Jr. cylinder heads. This manifold is .75" taller than our LS3 Super Victor intakes. This new Super Victor intake manifold is capable of airflow demands of 800+ hp on naturally aspirated engines. This manifold includes machined fuel injector bosses. A carburetor mounted style throttle bracket is recommended.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-58612EF Manu # 29025 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $597.35

Victor Jr. Big Block Chevy 454-R EFI Intake Manifold
Edelbrock Victor Jr. 454-R EFI Intake Manifold For Chevrolet 396-502 Big-Block V8
Product Attributes:
- Basic Operating RPM Range: 3500-7500
- Center Maximum Height: 5.960
- CNC Ported: No
- Cylinder Head Type: Oval Port- Large
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Chevy Big Block (396-502)
- Flange Type: 4150
- Front Maximum Height: 5.960
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 5.960
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 3500-7500
- Single Or Dual Plane Type: Single
- Usage: Racing
- Vehicle Model: Chevrolet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Race-Winning Design For All Types Of Competition
- Single-Plane Maximizes Torque And Horsepower
- Runners Feature Extra Material for Custom Porting
- For Performance in 3500 to 7500 RPM Range
- Ideal for 502 cid and Smaller Competition Engines
Edelbrock part #29025 Victor Jr. 454-R EFI intake manifold is designed for competition 396-502 big-block Chevy engines with rectangular-port cylinder heads. It features extended runner dividers, smaller plenum chambers and unique runner design for better 60 foot times and max power from 3500 to 7500 rpm. These intake manifolds are especially suited to 502 c.i.d. and smaller competition engines. The Edelbrock Victor Jr. 454-R EFI intake manifold will fit Edelbrock Victor race cylinder heads #77609 and Victor 24 degree #77409, #77459, #77429, #77479 and #77489.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-1253490 Manu # 2915 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $528.22

Victor Intake Manifold Small-Block Chrysler
Edelbrock Victor Intake Manifold for 318-360 Chrysler Small Block LA engines
Product Attributes:
- Basic Operating RPM Range: 3500-8000
- Center Maximum Height: 4.920
- CNC Ported: No
- Cylinder Head Type: Mopar 340/360
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Mopar 318-360
- Flange Type: 4150
- Front Maximum Height: 4.920
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 4.920
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 3500-8000
- Single Or Dual Plane Type: Single
- Usage: Racing
- Vehicle Model: Chrysler
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For 3500 to 8000 RPM High-Performance Engines
- Designed In Conjunction w/Billy Glidden
- For Oval Track/Drag Race Engines
- Superior Horse Power And Torque Potential
Edelbrock part #2915 Victor 340 intake manifold is designed for 340-360 c.i.d. Chryslers using standard rectangular-port heads. For oval track and drag race engines operating from 3500-8000 rpm. This intake manifold can be used on 318 c.i.d. engines with 340-360 heads. Will not fit 1992 and later Magnum engines. Accepts 1975 and earlier waterneck only.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-16192DE Manu # 2916 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $620.30

Super Victor Tall Deck BBC Intake Manifold
Edelbrock Super Victor Tall Deck Intake Manifold For Chevrolet 500+ Ci. Big-Block V8
Product Attributes:
- Basic Operating RPM Range: 3500-8500
- Center Maximum Height: 6.950
- CNC Ported: No
- Cylinder Head Type: Rectangular Port
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Chevy Big Block (396-502)
- Flange Type: 4500
- Front Maximum Height: 6.950
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 6.950
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 3500-8500
- Single Or Dual Plane Type: Single
- Usage: Racing
- Vehicle Model: Chevrolet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For 3500 to 8000 RPM High-Performance Engines
- Ideal For 500+ cid Engines
- Ideal For Big Block Drag Eng. w/High Flow Req.
- Single-Plane Manifold
- Use On Tall-Deck Blocks w/o Manifold Spacers
- For Race Use Only
Edelbrock part #2916 Super Victor BBC Tall-Deck intake manifold is designed for Chevy big-blocks with rectangular port cylinder heads. This single-plane manifold is ideal for 500+ cubic-inches or any big-block drag race engine with high air flow requirements. In dyno testing, Super Victor #2916 Tall-Deck outperformed the competition out-of-the-box with just a port match and minor blending of critical surfaces.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-03558A4 Manu # 29275 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $649.63

Super Victor Big Block Chevy EFI Intake Manifold
Edelbrock Super Victor 454 BBC EFI Intake Manifold For Chevrolet 500+ Ci. Big-Block V8
Product Attributes:
- Basic Operating RPM Range: 3500-8500
- Center Maximum Height: 6.200
- CNC Ported: No
- Cylinder Head Type: Rectangular Port
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Chevy Big Block (396-502)
- Flange Type: 4500
- Front Maximum Height: 6.200
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 6.200
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 3500-8500
- Single Or Dual Plane Type: Single
- Usage: Racing
- Vehicle Model: Chevrolet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Up To 8000 RPM High-Performance Engines
- Ideal For 500+ cid Engines
- Ideal For Big Block Drag Eng. w/High Flow Req.
Edelbrock part #29275 Super Victor BBC EFI intake manifold is designed for Chevy big-blocks with rectangular port cylinder heads. It features a single-plane design that is ideal for 500+ cubic-inches or any big-block drag race engine with high air flow requirements. In dyno testing, Super Victor #29275 EFI outperformed the competition out-of-the-box with just a port match and minor blending of critical surfaces.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-036845B Manu # 2928 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $617.27

Super Victor 8.2 Intake Manifold Small-Block Ford
Edelbrock Super Victor 8.2 Intake Manifold for Ford 289-347 Small-Block V8
Product Attributes:
- Basic Operating RPM Range: 4500-9000
- Center Maximum Height: 6.350
- CNC Ported: No
- Cylinder Head Type: Standard
- EGR Port: No
- Emission: Without Egr
- Engine Make/Size: Ford 260-302
- Flange Type: 4150
- Front Maximum Height: 6.350
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 6.350
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- RPM Range: 4500-9000
- Single Or Dual Plane Type: Single
- Usage: Racing
- Vehicle Model: Ford
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For 4500 To 9000 RPM High-Performance Engines
- Ideal For Use In Drag Racing Applications
- Excellent For Large Displacement Drag Racing Eng.
- Delivers Big Power Gains
- Direct Line of Sight Flow Path Maximizes Flow
Edelbrock part #2928 Super Victor 8.2 intake manifold is designed for high-rpm and competition 302-347 engines with aftermarket Windsor-style racing cylinder heads such as the Edelbrock Victor heads #77219 or Victor Jr. heads #77169. The Super Victor 8.2 is for engines with a standard 8.2" deck height. Excellent for large displacement drag racing engines, this single plane race manifold delivers big power gains from 4500 to 8500 rpm and includes nitrous and rear cooling water bosses. The square-bore carburetor pad stands .850" taller than the Edelbrock Victor Jr. #2921.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 1960 Chrysler New Yorker Engine Intake Manifold