1960 Chrysler Imperial Engine Intake Manifold Engine - Edelbrock, FAST, Ford Performance, Holley, Racing Head Service (RHS), Weiand

Engine Intake Manifold Holley

Part # P311-21E4EAE Manu # 300-717 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,011.04

Holley EFI Ultra Lo-Ram Intake Manifold Kit
Holley EFI Ultra Lo-Ram Intake Manifold Kit; Fits GM Gen V Hemi Engines w/LT Cylinder Heads; w/Burst Plate Flange Plenum Top; Cast Aluminum; Natural Satin Finish;
Product Attributes:
- Usage: Racing
- WARNING CA Proposition 65: No
Features:
- Designed For GM Gen V Engines Equipped With GM LT Type Cylinder Heads
- Engineered For Forced Induction Supercharged Or Turbocharged Engine Applications
- 0.97 in. Taller Than A Factory LT1 Manifold
- Modular And Front Entry Plenum Flange Allows Design And Fabrication Of Special Throttle Body Adapters
- Clears C7 Corvette Cowls And Hoods Without Modification
- Kits With Port Injection Provide High Volume Fuel Rails With 3/4-16 O-ring Ports 8 AN
The Holley GM Gen V LT Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application. The front entry throttle body flange has a 105mm opening to work with throttle body part number 112-581 or similar models. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Available for OE direct fuel injection only and with port fuel injection provisions and a burst panel flange options. For the port fuel injection option, the high volume -8AN fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short (such as Pico, or LS7) fuel injectors.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Holley

Part # P311-49C10FD Manu # 300-717BK Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,048.97

Holley EFI Ultra Lo-Ram Intake Manifold Kit
Holley EFI Ultra Lo-Ram Intake Manifold Kit; Fits GM Gen V Hemi Engines w/LT Cylinder Heads; w/Burst Plate Flange Plenum Top; Black Powder Coat Finish;
Product Attributes:
- Usage: Racing
- WARNING CA Proposition 65: No
Features:
- Designed For GM Gen V Engines Equipped With GM LT Type Cylinder Heads
- Engineered For Forced Induction Supercharged Or Turbocharged Engine Applications
- 0.97 in. Taller Than A Factory LT1 Manifold
- Modular And Front Entry Plenum Flange Allows Design And Fabrication Of Special Throttle Body Adapters
- Clears C7 Corvette Cowls And Hoods Without Modification
- Kits With Port Injection Provide High Volume Fuel Rails With 3/4-16 O-ring Ports 8 AN
The Holley GM Gen V LT Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application. The front entry throttle body flange has a 105mm opening to work with throttle body part number 112-581 or similar models. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Available for OE direct fuel injection only and with port fuel injection provisions and a burst panel flange options. For the port fuel injection option, the high volume -8AN fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short (such as Pico, or LS7) fuel injectors.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Holley

Part # P311-3C112BB Manu # 300-719 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,048.97

Holley EFI Ultra Lo-Ram Intake Manifold Kit
Holley EFI Ultra Lo-Ram Intake Manifold Kit; Fits GM Gen V Hemi Engines w/LT Cylinder Heads; Port Fuel Injection; w/Burst Plate Flange Plenum Top; Cast Aluminum; Satin Finish;
Product Attributes:
- Usage: Racing
- WARNING CA Proposition 65: No
Features:
- Designed For GM Gen V Engines Equipped With GM LT Type Cylinder Heads
- Engineered For Forced Induction Supercharged Or Turbocharged Engine Applications
- 0.97 in. Taller Than A Factory LT1 Manifold
- Modular And Front Entry Plenum Flange Allows Design And Fabrication Of Special Throttle Body Adapters
- Clears C7 Corvette Cowls And Hoods Without Modification
- Kits With Port Injection Provide High Volume Fuel Rails With 3/4-16 O-ring Ports 8 AN
The Holley GM Gen V LT Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application. The front entry throttle body flange has a 105mm opening to work with throttle body part number 112-581 or similar models. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Available for OE direct fuel injection only and with port fuel injection provisions and a burst panel flange options. For the port fuel injection option, the high volume -8AN fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short (such as Pico, or LS7) fuel injectors.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Holley

Part # P311-30B358A Manu # 300-911 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $969.35

Holley EFI Lo-Ram Intake Manifold
Holley EFI Lo-Ram Intake Manifold; Oval; Cast Aluminum; Natural Finish; -8AN Port Fuel Rail; 1/8 NPT Accessory Port;
Product Attributes:
- Usage: Street/hi-performance
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Cast Aluminum Construction
- Modular Design
- Refined Port Design With Streamlined Injector Boss For Reduced Turbulence Without Loss Of Flow Area
- Allows A Variety Of Throttle Valves Including Large Monoblade
Finally, an affordable Coyote intake manifold that also performs! The Hi-Ram and Ultra Lo-Ram are designed to fit stock bolt pattern OE heads found on the 2011-2023 Ford 5.0 Coyotes and related engine families, such as, Voodoo and Predators. These kits include fuel rails for use with OEM type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, both manifolds have a 9.20-inch runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold, plus clears 2015-2023 Mustang factory hoods. Offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150x66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-2023 GT throttle bodies can be used with the optional 717-18 adaptor.The aggressively designed Hi-Ram is constructed in a two-piece design to accommodate for air to water intercoolers and feature up to 20% more plenum volume versus Ultra Lo Rams. This manifold design is only offered in an oval throttle body configuration.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Holley

Part # P311-513AB84 Manu # 820042-1 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $693.95

Sniper EFI Hi-Ram Intake Manifold
Sniper EFI Hi-Ram Intake Manifold; For Use w/LS1/LS2/LS6 GM Engines; 102mm Throttle Bore; Sheet Metal; Black; Includes Fuel Rail Kit w/Sniper Logo;
Product Attributes:
- Cylinder Head Type: Ls1/ls2/ls6
- Engine Make/Size: Chevy Ls1/2/6
- RPM Range: 2200-6800
- Usage: Street/hi-performance
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Black Finish Creates Stealthy Under-Hood Styling
- 102Mm Throttle Bore Opening For Increased Air Flow
- 100 Percent Tig Welded For Strength And Durability
- Includes 3/8 in. Fuel Rail Kits
- Product Includes All Gaskets And Hardware For A Hassle-Free Installation
- The Sniper Intake Will Only Accept EV1 Style Injectors
Holley is now offering budget friendly fabricated intake manifolds for LS, Small Block Chevy and Small Block Ford engines in carbureted and EFI versions! Now Includes mounting provision for MAP sensor on rear of Intake plenum. Use GM #12592525 or equivalent

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Holley

Part # P311-319A1E5 Manu # 822241 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,312.95

EFI Intake Manifold
EFI Intake Manifold; Upper; Fits w/LS3/L92 Engines; EV1 Injectors Only; Dual Plenum; 102mm; 12.75 in. Runners; Includes Fuel Rail Kit; Fabricated; Silver;
Product Attributes:
- Cylinder Head Type: Ls3/l92
- Engine Make/Size: Chevy Ls3/l92
- Usage: Racing
- WARNING CA Proposition 65: No
Features:
- Silver Finish Creates High Impact Under-Hood Styling
- 3mm (1/8) Thick T6061 Sheet Aluminum Construction For Maximum Durability
- Twin 102mm Throttle Bore Openings For Increased Air Flow
- 100% Tig Welded For Strength And Durability
- Includes 3/8 Fuel Rail Kits (Sniper Logo Laser Engraved)
- Intake Runners With Tapered Top Is Designed To Increase Air Velocity
- More Evenly Distribute Airflow To All 8 Cylinders Improving Performance And Throttle Response
- Dual Plenum Design Ideal For Street Max Effort Engines And Boosted Applications
- Long Intake Runner Lengths (12.75 Inches) Offering Low End Torque And Operating Range Of 1600-6800 Rpm
- Product Includes All Gaskets And Hardware For A Hassle-Free Installation
- The Sniper Intake Will Only Accept Ev1 Style Injectors.
Holley continues to push the envelope of intake design with its latest offering. The unique look of this intake will surely stand out from the crowd! Our latest release of fabricated Dual Plenum intake manifolds for GM LS1/2/6 and LS3/L92 engines. This unique design of utilizing two plenums solves two common problems experienced with many intakes increased airflow and even dispersion of air to intake ports. The use of one tapered plenum to accommodate one bank of cylinders accomplishes both problems. The entire volume of incoming air is distributed to only four cylinders and the tapered shape of the plenum help increased air velocity directed to each of the intake runner ports. Our dual plenum design features extremely long 12-3/4 in. runners to develop low-end torque making this intake an ideal street intake. These intake are finished in our familiar silver and black anodized finishes for durability and good looks. Our 3/8 in. fuel rail kit include a laser engrave Sniper logo and are capable of supporting 750+ horsepower.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Holley

Part # P311-187548A Manu # 300-719BK Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,076.07

Holley EFI Ultra Lo-Ram Intake Manifold Kit
Holley EFI Ultra Lo-Ram Intake Manifold Kit; Fits GM Gen V Hemi Engines w/LT Cylinder Heads; Port Fuel Injection; w/Burst Plate Flange Plenum Top; Black Powder Coat Finish;
Product Attributes:
- Usage: Racing
- WARNING CA Proposition 65: No
Features:
- Designed For GM Gen V Engines Equipped With GM LT Type Cylinder Heads
- Engineered For Forced Induction Supercharged Or Turbocharged Engine Applications
- 0.97 in. Taller Than A Factory LT1 Manifold
- Modular And Front Entry Plenum Flange Allows Design And Fabrication Of Special Throttle Body Adapters
- Clears C7 Corvette Cowls And Hoods Without Modification
- Kits With Port Injection Provide High Volume Fuel Rails With 3/4-16 O-ring Ports 8 AN
The Holley GM Gen V LT Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application. The front entry throttle body flange has a 105mm opening to work with throttle body part number 112-581 or similar models. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Available for OE direct fuel injection only and with port fuel injection provisions and a burst panel flange options. For the port fuel injection option, the high volume -8AN fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short (such as Pico, or LS7) fuel injectors.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Holley

Part # P311-31FA95E Manu # 534-52 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $84.45

Holley EFI Vacuum Manifold Kit
Holley EFI Vacuum Manifold Kit; Includes Twelve 1/8 NPT Ports/4 Mounting Holes For 5/16 in. Socket Head Cap;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Compatible w/All Transducers That Utilize 1/8 NPT Male Threads
- 12 Independent 1/8 NPT Ports
- Two -6 ORB Ports
- Improve Engine Bay Organization
- For Engines That Require Multiple Vacuum/Boost Reference Sources
- 4 Mounting Holes For The Use Of 5/1 in. Socket Head Cap Hardware
- Crafted From 6061 Aluminum
The Holley EFI Vacuum Manifold kit is designed for those of you wanting a simple and clean solution for plumbing either vacuum or boost referenced sources. This manifold block features 12 1/8th NPT ports that can be plumbed with most common EFI transducers such as the Holley 554-102 0-100 psi transducer. It also features 2x -6 O-ring boss AN Ports, ensuring your manifold block has an excellent vacuum or boost reference source. Improve your engine bay organization by mounting all of your common pressure sources in one easy to access location!

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Holley

Part # P311-3F895AB Manu # 820041-1 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $693.95

Sniper EFI Intake Manifold
Sniper EFI Intake Manifold; Fits w/GM LS1/LS2/LS6; 102 mm. Throttle Bore; T6061 Aluminum; Silver; RPM Power Band 2500-7000; Includes 3/8 in. Fuel Rail/Gaskets/Hardware;
Product Attributes:
- Cylinder Head Type: Ls1/ls2/ls6
- Emission: N/a
- Engine Make/Size: Gm Ls1/ls2/ls6
- RPM Range: 2500-7000
- Usage: Racing
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Silver Finish Creates Stealthy Under-Hood Styling
- 102Mm Throttle Bore Opening For Increased Air Flow
- 100 Percent TIG Welded For Strength And Durability
- Includes 3/8 Inches Fuel Rail Kits Sniper W/Logo Laser Engraved
- Product Includes All Gaskets And Hardware For A Hassle-free Installation
Holley is now offering budget friendly fabricated intake manifolds for LS, Small Block Chevy and Small Block Ford engines in carbureted and EFI versions! Now Includes mounting provision for MAP sensor on rear of Intake plenum. Use GM #12592525 or equivalent

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Holley

Part # P311-274291F Manu # 300-269 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $519.04

EFI Intake Manifold
EFI Intake Manifold; Single Plane; Fits w/Gen III LS Engines w/LS7 Cylinder Heads; 4150 Flange; Incl Fuel Rails/Hardware/Gaskets; Cast Aluminum; Silver;
Product Attributes:
- Cylinder Head Type: Ls7
- Engine Make/Size: Gen. Iii Ls1/ls2/ls6
- Usage: Racing
- WARNING CA Proposition 65: No
Features:
- 4150 Square Bore Flange
- Cast Aluminum Construction
Single Plane EFI LS Intake Manifold. Fits all GM LS Gen III engines equipped with LS7 cylinder heads. Designed with a 4150 Square bore flange. Optimized runner layout and constant cross sectional area - broad torque curve, best vehicle performance from 2500-7000 RPM Minimum carb flange height - fit in vehicles with minimum hood modifications. Cast aluminum construction - great manifold for centrifugal blower, turbocharged or NOS power adder applications The manifold kit includes the fuel rails, mounting hardware, and o-ring cylinder head mounting flange gaskets.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 1960 Chrysler Imperial Engine Intake Manifold