Finish Selecting Your Vehicle

Choose your Engine for your 1956 Chrysler Newport

  • 8 Cyl 5.8L

Shop By Brand

The Following brands are available based on your search.

  • Edelbrock
    Edelbrock
  • FAST
    FAST
  • Ford Performance
    Ford Performance
  • Holley
    Holley
  • Racing Head Service (RHS)
    Racing Head Service (RHS)
  • Weiand
    Weiand

Showing Products For 1956 Chrysler Newport Engine Intake Manifold

Below are all the different brands and applications for 1956 Chrysler Newport Engine Intake Manifold

Showing 1 - 10 of 138 Products for Engine Intake Manifold.

Refine Your Search

Weiand
1956 Chrysler Newport Engine Intake Manifold - Lower 8 Cyl 5.8L Weiand - Action +Plus Intake Manifold

P311-3DC90FB    8007WND  New

Qty:
In Stock & Ready to Ship
$463.00
Weiand Engine Intake Manifold  Lower
  • Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chrysler Small Block V8
    • Front Height: 4.880 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Rear Height: 5.940 In.
    • RPM Range: Idle-6000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
    • High Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1956 - Chrysler Newport Lower V 8 Cyl 5.8L 354 5802
Weiand
1956 Chrysler Newport Engine Intake Manifold - Lower 8 Cyl 5.8L Weiand - Action +Plus Intake Manifold

P311-3DC90FB    8007WND  New

Qty:
In Stock & Ready to Ship
$463.00
Weiand Engine Intake Manifold  Lower
  • Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chrysler Small Block V8
    • Front Height: 4.880 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Rear Height: 5.940 In.
    • RPM Range: Idle-6000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
    • High Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1956 - Chrysler Newport Lower V 8 Cyl 5.8L 354 5802
Racing Head Service (RHS)
Engine Intake Manifold Racing Head Service (RHS)

P311-0B981AA    11903-KIT  New

Qty:
In Stock & Ready to Ship
$822.06
Racing Head Service (RHS) Engine Intake Manifold
  • Dominator Flange EFI Single Plane Intake with Fuel Rails for Chevrolet Big Block
  • Offering excellent performance for drag race and marine Chevrolet Big Blocks, this EFI manifoldrail kit delivers excellent flow, throttle response and torque. The RHS 24 Degree Manifold provides a distinct advantage over the competition.
  • Product Attributes:
    • Basic Operating RPM Range: 3000-8000
    • Bolt Centerline to Port Floor: 1.15
    • Bolt Hole Centerline to Port Roof: 1.34
    • Carb Angle: 0
    • Carb Height: 7.46
    • Carburetor Mounting Pattern: 4500/dominator
    • Center Maximum Height: 7.46
    • CNC Ported: No
    • EGR?: No
    • Finish: Natural
    • Front Maximum Height: 2.81
    • Fuel Rail End Type: -8 An Female O-ring
    • Gasket Or Seal Included: No
    • Grade Type: Performance
    • Includes Fuel Rails?: Yes
    • Injectors Included?: No
    • Intake Port Height: 2.49
    • Intake Port Width: 1.71
    • Long Fuel Rail Stand Injector Compatibility: Ev1 Style
    • Long Fuel Rail Stand Length: 2.48
    • Material: Aluminum
    • Mounting Hole Diameter: 7/16 Slotted
    • Mounting Hole Quantity: 12
    • Multiport EFI Ready?: Yes
    • Nitrous Bosses?: No
    • Plenum Volume (including Runners): 268
    • Rear Maximum Height: 2.36
    • Short Fuel Rail Stand Injector Compatibility: Ls3 Style
    • Short Fuel Rail Stand Length: 1.4
    • Single Or Dual Plane Type: Single
    • Throttle Body Included?: No
  • These manifolds are designed for maximum airflow and power with a 4500 Dominator-style carburetor flange. Engineered to fit most 24-degree style race cylinder heads, RHS took additional efforts to ensure excellent port matching when paired with RHS Big Block Chevrolet cylinder heads. These manifolds are available in both carb and EFI versions and offer excellent performance for drag racing and marine applications. Featuring a single-plane design, they utilize individual runner dividers for excellent throttle response and exceptional torque. Available for both short and tall deck blocks, all versions utilize a standard BBC distributor – there is no need for a slip collar distributor or special distributor for tall deck engines. They feature auxiliary water ports, an integral water crossover and dual distributor hold-down pads. Ports for water lines are also provided at all four corners. RHS also teamed up with sister brand FAST to create a revolutionary EFI version of the manifold that features port angle optimized injector bung mounting and machining, which angles the injectors to point directly at the valve. In addition, the EFI manifolds feature integral sensor mounting points to improving function, fitment and packaging.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Racing Head Service (RHS)
Additional Fitment Information:
Vehicle
Weiand
Engine Intake Manifold Weiand

P311-2466FAB    7151WND  New

Qty:
In Stock & Ready to Ship
$718.45
Weiand Engine Intake Manifold
  • 6-71 / 8-71 SuperCharger Intake Manifold
  • 6-71 / 8-71 SuperCharger Intake Manifold; Lower; w/Rectangular Port Heads; Includes Rear Mounted Pop Off Plate; w/Boost Gauge Port; Satin Finish;
  • Product Attributes:
    • Blower Size:
      • 6-71
      • 8-71
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Chevy Big Block V8
    • RPM Range: N/a
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Easier Installation
    • Satin Finish
  • 6-71/8-71 Chevy B/B 396-502

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Weiand
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-17F6609    2504  New

Qty:
In Stock & Ready to Ship
$626.60
Edelbrock Engine Intake Manifold
  • Performer RPM 4V/Q-JET Marine Intake Manifold for 55-86 Small-Block Chevy
  • Performer RPM Q-JET Marine Intake Manifold For 1986 & Earlier Small-Block Chevrolet 262-400 V8's. All Cooling Water Passages are Lined with Brass to Prevent Corrosion. The Carb Pads Accept Either Q-Jet or Square-Bore Marine Carburetors
  • Product Attributes:
    • Basic Operating RPM Range: 1500-6500
    • Center Maximum Height: 4.720
    • CNC Ported: No
    • Cylinder Head Type: Standard
    • EGR Port: No
    • Emission: N/a
    • Engine Make/Size: Chevy Small Block (262-400)
    • Flange Type: 4150
    • Front Maximum Height: 4.200
    • Gasket Or Seal Included: No
    • Grade Type: Performance
    • Rear Maximum Height: 5.250
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • RPM Range: Idle -5500
    • Single Or Dual Plane Type: Dual
    • Usage: Oem
    • Vehicle Model: Chevrolet
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Cast Aluminum
    • Broad Powerband
  • Edelbrock part #2504 Performer RPM Q-Jet marine intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8's for spread-bore (Q-Jet) or square-bore carbs. This Performer RPM Q-Jet intake manifold is designed specifically for demanding marine applications and delivers maximum power and a broad torque curve for high-performance marine.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-2621642    2506  New

Qty:
In Stock & Ready to Ship
$631.93
Edelbrock Engine Intake Manifold
  • Performer RPM 4V/Q-JET Marine Intake Manifold for 87-95 Small-Block Chevy
  • Performer RPM Q-JET Marine Intake Manifold For 1987-95 Small-Block Chevrolet 262-400 V8's. All Cooling Water Passages are Lined with Brass to Prevent Corrosion. The Carb Pads Accept Either Q-Jet or Square-Bore Marine Carburetors
  • Product Attributes:
    • Basic Operating RPM Range: 1500-6500
    • Center Maximum Height: 4.720
    • CNC Ported: No
    • Cylinder Head Type: Standard
    • EGR Port: No
    • Emission: N/a
    • Engine Make/Size: Chevy Small Block (262-400)
    • Flange Type: 4150
    • Front Maximum Height: 4.200
    • Gasket Or Seal Included: No
    • Grade Type: Performance
    • Rear Maximum Height: 5.250
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • RPM Range: Idle -5500
    • Single Or Dual Plane Type: Dual
    • Usage: Oem
    • Vehicle Model: Chevrolet
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Cast Aluminum
    • Broad Powerband
  • Edelbrock part #2506 Performer RPM Q-Jet marine intake manifold is designed for 1987-95 262-400 c.i.d. Chevy V8's for spread-bore (Q-Jet) or square-bore carbs. The Edelbrock Performer RPM Q-Jet #2506 intake manifold is designed specifically for demanding marine applications and delivers maximum power and a broad torque curve for high-performance marine. Delivers maximum power and a broad torque curve for high-performance marine. Carb pad will accept square-bore carbs without adapters. The Performer RPM Q-Jet marine intake manifold features brass lined front water crossover and brass flange inserts to cover the rear water openings.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-3E75DDF    28001  New

Qty:
In Stock & Ready to Ship
$885.73
Edelbrock Engine Intake Manifold
  • Big Victor 2 Spread-Port Intake Manifold for Big-Block Chevy
  • Edelbrock Big Victor 2 Spread-Port Intake Manifold for Big-Block Chevrolet
  • Product Attributes:
    • Basic Operating RPM Range: 3500-8500
    • Center Maximum Height: 9.210
    • CNC Ported: No
    • Cylinder Head Type: Big Chief
    • EGR Port: No
    • Emission: Without Egr
    • Engine Make/Size: Chevy Big Block (396-502)
    • Flange Type: 4500
    • Front Maximum Height: 9.210
    • Gasket Or Seal Included: No
    • Grade Type: Performance
    • Rear Maximum Height: 9.210
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • RPM Range: 3500-8500
    • Single Or Dual Plane Type: Single
    • Usage: Racing
    • Vehicle Model: Chevrolet
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For 3500 to 8500 RPM High-Performance Engines
    • For Large CID or High RPM Drag Racing Big Blocks
    • Use with Dart Big Chief Cylinder Heads
    • Require Port Matching and Can Use Oval Ports
    • Better Top End Horsepower and Consistency
    • Crisp Throttle Response off the Stop
    • Use for 9.8 in. Deck Height Engines
    • Use Appropriate 4500-Series Carburetor
  • Edelbrock part #28001 Big Victor 2 Spread-Port intake manifold is designed for large cubic-inch or high rpm drag racing big-blocks with Edelbrock Big Victor, Dart Big Chief or Brodix Big Duke cylinder heads, this manifold has an average runner area of approximately 4.75 sq. in. The port exits have been reduced to accommodate the wide variety of intake port sizes and require port matching. The runners have a minimum corner radius of .500" from the plenum to the exit allowing the popular oval port shape to be used. The outside runners are shorter and straighter than competitor's manifolds and the plenum is longer front to back. These features, combined with approximately 5% taper in runner cross-sectional area, give better top end horsepower while maintaining consistency and throttle response off the stop. All applications are equipped with a 4500 Series flange and will accept 2.25" throttle body butterflies without a spacer or modification.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-5BB05E2    28002  New

Qty:
In Stock & Ready to Ship
$897.74
Edelbrock Engine Intake Manifold
  • Big Victor 2 Spread-Port, Tall Deck Intake Manifold for Big-Block Chevy
  • Edelbrock Big Victor 2 Spread-Port Tall Deck Intake Manifold for Big-Block Chevrolet
  • Product Attributes:
    • Basic Operating RPM Range: 3500-8500
    • Center Maximum Height: 9.530
    • CNC Ported: No
    • Cylinder Head Type: Big Chief
    • EGR Port: No
    • Emission: Without Egr
    • Engine Make/Size: Chevy Big Block (396-502)
    • Flange Type: 4500
    • Front Maximum Height: 9.530
    • Gasket Or Seal Included: No
    • Grade Type: Performance
    • Rear Maximum Height: 9.530
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • RPM Range: 3500-8500
    • Single Or Dual Plane Type: Single
    • Usage: Racing
    • Vehicle Model: Chevrolet
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For 3500 to 8500 RPM High-Performance Engines
    • For Large CID or High RPM Drag Racing Big Blocks
    • Use with Dart Big Chief Cylinder Heads
    • Require Port Matching and Can Use Oval Ports
    • Better Top End Horsepower and Consistency
    • Crisp Throttle Response off the Stop
    • Use for 10.2 in. Deck Height Engines
    • Use Appropriate 4500-Series Carburetor
  • Edelbrock part #28002 Big Victor 2 Spread-Port Tall-Deck intake manifold is designed for large cubic-inch or high rpm drag racing big-blocks with Edelbrock Big Victor, Dart Big Chief or Brodix Big Duke cylinder heads, this manifold has an average runner area of approximately 4.75 sq. in. The port exits have been reduced to accommodate the wide variety of intake port sizes and require port matching. The runners have a minimum corner radius of .500" from the plenum to the exit allowing the popular oval port shape to be used. The outside runners are shorter and straighter than competitor's manifolds and the plenum is longer front to back. These features, combined with approximately 5% taper in runner cross-sectional area, give better top end horsepower while maintaining consistency and throttle response off the stop. All applications are equipped with a 4500 Series flange and will accept 2.25" throttle body butterflies without a spacer or modification.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-1657041    28097  New

Qty:
In Stock & Ready to Ship
$661.77
Edelbrock Engine Intake Manifold
  • Super Victor Intake Manifold for Gen III LS1/LS2
  • Edelbrock Super Victor LS1/LS2 Carbureted Intake Manifold for Chevrolet LS Gen III
  • Product Attributes:
    • Basic Operating RPM Range: 3500-8000
    • Center Maximum Height: 6.070
    • CNC Ported: No
    • Cylinder Head Type: Standard
    • EGR Port: No
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block Ls1
    • Flange Type: 4150
    • Front Maximum Height: 6.070
    • Gasket Or Seal Included: No
    • Grade Type: Performance
    • Rear Maximum Height: 6.070
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • RPM Range: 3500-8000
    • Single Or Dual Plane Type: Single
    • Usage: Racing
    • Vehicle Model: Chevrolet
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Offers Greater Air Flow Potential
    • Bigger Power Gains
    • Accepted By NASCAR For Grand National Series
    • For Use With Carburetor
  • Edelbrock part #28097 Super Victor LS1 intake manifold offers greater air flow potential for even bigger power gains, this manifold has been accepted by NASCAR for use in the Grand National West/Grand National East series. The carb mount pad is 1.12" taller than the Victor Jr. LS1, and the port exits have been increased to 1.08" x 2.74". Edelbrock offers the optional LS1 Timing Control Module #91238 to drive the stock LS1 Coil-on-Plug ignition system. LS2 applications require MSD's #6012 LS2 ignition controller (available through MSD Performance).

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-3EC53F8    2821  New

Qty:
In Stock & Ready to Ship
$842.64
Edelbrock Engine Intake Manifold
  • Super Victor Small-Block Chevy LS3 Carbureted 4500 Intake Manifold
  • Edelbrock Super Victor LS3 Carbureted Intake Manifold for Small-Block Chevrolet Gen IV Engines with LS3, L92, & L76 Rectangle Port Cylinder Heads. Accepts 4500-Series Carburetor. Non-EGR.
  • Product Attributes:
    • Basic Operating RPM Range: 3500-7500
    • Center Maximum Height: 7.670
    • CNC Ported: No
    • Cylinder Head Type: Ls3/l92
    • EGR Port: No
    • Emission: Without Egr
    • Engine Make/Size: Chevy Ls3/l92
    • Flange Type: 4500
    • Front Maximum Height: 7.670
    • Gasket Or Seal Included: No
    • Grade Type: Performance
    • Rear Maximum Height: 7.670
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • RPM Range: 3500-7500
    • Single Or Dual Plane Type: Single
    • Usage: Racing
    • Vehicle Model: Chevrolet
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For 3500 to 7500 RPM High-Performance Engines
    • Ideal For Drag Racing Or Marine Applications
    • Use For Any Application Requiring Maximum Power
  • Edelbrock part #2821 Super Victor LS3 intake manifold is designed for Gen IV LS engines equipped with LS3 cylinder heads, this new Super Victor intake manifold is ideal for anyone building a 700+ hp 4500 series carbureted large displacement racing engine operating between 3,500 - 7,500 rpm. This new Super Victor intake manifold is designed with 24% larger runners than our Victor Jr. #28457 along with a larger 4500 style plenum. The large plenum makes these intake manifolds ideal for nitrous and forced induction applications. They also feature tapered runners for increased flow at high rpm. The Super Victor 4500 series manifolds can accommodate bores up 2.25". A carburetor mounted style throttle bracket is recommended.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 138 Products for Engine Intake Manifold.