Shop for Discount Auto Parts, Replacement and Performance Parts and Accessories

1988 Merkur XR4Ti Power Steering Pump BBB Industries - Reman Power Steering Pump

Part # P311-269FE62 Manu # 711-0117 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 19318545 , E8ZZ-3A674-A

Qty:

In Stock & Ready to Ship

Core Price: $10.00 Best Price: $63.78

w/o Reservoir
Reman Power Steering Pump
Product Attributes:
- Filter Included: No
- Inlet Attachment Type: Reservoir
- Installation Kit Included: Yes
- Outlet Thread Size: M16x1.50
- Pulley Attachment Type: Press-on
- Pulley Included: No
- Remote Reservoir: No
- Reservoir Cap Included: No
- Reservoir Included: No
- Sensor Included: No

Brand: BBB Industries

Vehicle
1988 - Merkur XR4Ti

1986 Merkur XR4Ti Power Steering Pump BBB Industries - Reman Power Steering Pump

Part # P311-5F5C39E Manu # 711-2119 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 19319723 , E5DZ-3A674-A

Qty:

In Stock & Ready to Ship

Core Price: $30.00 Best Price: $61.18

with Reservoir; ** Reservoir Units Are Recommended Replacement **
Reman Power Steering Pump
Product Attributes:
- Inlet Attachment Type: Reservoir
- Inlet Diameter: 0.376
- Inlet Size: 0.376
- Installation Kit Included: Yes
- Outlet Thread Size: M16x1.50
- Pulley Attachment Type: Press-on
- Pulley Included: No
- Remote Reservoir: No
- Reservoir Cap Included: No
- Reservoir Included: Yes
- Sensor Included: No

Brand: BBB Industries

Vehicle
1986 - Merkur XR4Ti

1987 Merkur XR4Ti Power Steering Pump Cardone - Power Steering Pump

Part # P311-10BCB4F Manu # 20-6247 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: E5DZ3A674A , E5RY3A674A , E6SZ3A674A , E8SZ3A674B , E8ZZ3A674A

Qty:

In Stock & Ready to Ship

Core Price: $20.70 Best Price: $56.81

Reservoir Included In-Line Filter available without Aftermarket Filtration Improvement For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
Power Steering Pump
Product Attributes:
- E-Waste: No
- FAQs:
  - A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
  - I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
  - I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
  - Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
  - Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
  - The End Of The Original Pump's Input Shaft Enlarged Causing The Pulley Hole To Increase During Removal. The Pulley Must Be Replaced.
  - The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
  - Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
  - Why Is The Pump Making A Whining Noise All Of The Time?
  - Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
- Features and Benefits:
  - All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
  - All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
  - Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
- Hose Port Type: O-ring
- Housing Material: Aluminum
- Mounting Hardware Included: No
- Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
- Power Steering Outlet ID Size: 0
- Power Steering Outlet Thread Size: 5/8-18
- Power Steering Pump Inlet Attachement Type: Hose Barb
- Power Steering Pump Outlet Attachment Type: Threaded
- Power Steering Reservoir Cap Included: No
- Product Condition: Remanufactured
- Pulley Attachement Type: Press-on
- Pulley Included: No
- Remote Reservoir: No
- Reservoir Included: Yes
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Brand: Cardone

Vehicle
1987 - Merkur XR4Ti

1988 Merkur Scorpio Power Steering Pump Cardone - Power Steering Pump

Part # P311-023CD40 Manu # 20-878 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 26000492 , 26000493 , 26000494 , 26000495 , 26001659 , 26002916 , 26002917 , 26002918 , 26002919 , 26002974 , 26002976 , 26006650 , 26008483 , 26009089 , 26012026 , 26012027 , 26012029 , 26015577 , 26016158 , 26019670 , 26027200 , 35305085 , 53004818 , 68197540 , 7849438 , E7RY3A674A , E8RY3A674A

Qty:

In Stock & Ready to Ship

Core Price: $5.40 Best Price: $53.88

Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
Power Steering Pump
Product Attributes:
- E-Waste: No
- FAQs:
  - A Whining Pump Is Usually Caused By Air In The System. Remove Reservoir Lid And Inspect Fluid Level And Condition. If Fluid Has Foam Or Air Bubbles Present, You Must Bleed The System Again. Some Systems Are Very Difficult To Bleed Manually And May Require
  - I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
  - I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
  - Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
  - The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
  - The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
  - There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
  - Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
  - Why Is The Pump Making A Whining Noise All Of The Time?
  - Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
- Features and Benefits:
  - All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
  - All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
  - Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
- Hose Port Type: O-ring
- Housing Material: Cast Iron
- Mounting Hardware Included: No
- Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
- Power Steering Outlet ID Size: 0
- Power Steering Outlet Thread Size: 16x1.5
- Power Steering Pump Inlet Attachement Type: Hose Barb
- Power Steering Pump Outlet Attachment Type: Threaded
- Power Steering Reservoir Cap Included: No
- Product Condition: Remanufactured
- Pulley Attachement Type: Press-on
- Pulley Included: No
- Remote Reservoir: No
- Reservoir Included: No
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Brand: Cardone

Vehicle
1988 - Merkur Scorpio

1987 Merkur XR4Ti Power Steering Pump Cardone - Power Steering Pump

Part # P311-02B01EB Manu # 20-498 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: E5RY3A674A , E63Z3A674A , E6FZ3A674A , E6FZ3A674B , E6FZ3A674C , E6SZ3A674A , E7SZ3A674A , E8FZ3A674A , E8FZ3A674B , E8SZ3A674B , E8ZZ3A674A

Qty:

In Stock & Ready to Ship

Core Price: $14.40 Best Price: $53.88

Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
Power Steering Pump
Product Attributes:
- E-Waste: No
- FAQs:
  - A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
  - I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
  - I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
  - Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
  - The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
  - The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
  - There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
  - Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
  - Why Is The Pump Making A Whining Noise All Of The Time?
  - Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
- Features and Benefits:
  - All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
  - All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
  - Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
- Hose Port Type: O-ring
- Housing Material: Aluminum
- Mounting Hardware Included: No
- Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
- Power Steering Outlet ID Size: 0
- Power Steering Outlet Thread Size: 5/8-18
- Power Steering Pump Inlet Attachement Type: Hose Barb
- Power Steering Pump Outlet Attachment Type: Threaded
- Power Steering Reservoir Cap Included: No
- Product Condition: Remanufactured
- Pulley Attachement Type: Press-on
- Pulley Included: No
- Remote Reservoir: No
- Reservoir Included: No
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Brand: Cardone

Vehicle
1987 - Merkur XR4Ti

Power Steering Pump Tuff Stuff Performance Accessories

Part # P311-4EDB934 Manu # 6175AL-7 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $166.73

Type II Alum. Power Steering Pump
Type II Alum. Power Steering Pump; GM Pressure Slip; 8mm Through Hole Mounting; Aluminum; For Street Rods/Custom Vehicles w/Limited Engine Space; Factory Cast PLUS+;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
Features:
- Compact Size Ideal For Tight Applications
- Requires A Press Fit Pulley Not Included
- 1200 PSI Rated To Work With Most Gear Boxes
- 3 GPM Flow
- Top Pressure Port
- Clockwise Rotation Only
- 100% New Components
- Made In The U.S.A.
Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Tuff Stuff Performance Accessories

Vehicle

Power Steering Pump Tuff Stuff Performance Accessories

Part # P311-2135F81 Manu # 6175AL-2 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $178.98

Type II Alum. Power Steering Pump
Type II Alum. Power Steering Pump; An-6 And AN-10 Fittings; M8x1.25 Threaded Hole Mounting; Aluminum; For Street Rods/Custom Vehicles w/Limited Engine Space; Factory Cast PLUS+;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
Features:
- Compact Size Ideal For Tight Applications
- Requires A Press Fit Pulley Not Included
- 1200 PSI Rated To Work With Most Gear Boxes
- 3 GPM Flow
- Top Pressure Port
- Clockwise Rotation Only
- 100% New Components
- Made In The U.S.A.
Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Tuff Stuff Performance Accessories

Vehicle

Power Steering Pump Tuff Stuff Performance Accessories

Part # P311-2AA7DBB Manu # 6174A Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $229.90

Saginaw Style Power Steering Pump
Saginaw Style Power Steering Pump; Univ. Fit; 5/8 in. Keyed Shaft; 850 PSI; 5/8-18 SAE Pressure Fittings; 3/8 in.-16 Mtg. Holes; Chrome;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
Features:
- Includes Reservoir/Pump Assembly/Billet Cap/Dipstick/Hardware
- Requires A Bolt On Pulley Which Is Not Included
- Clockwise Rotation Only
- 850 PSI Rating
- 2 GPM Flow
- 100% New Components
- Made In The U.S.A.
Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Tuff Stuff Performance Accessories

Vehicle

Power Steering Pump Tuff Stuff Performance Accessories

Part # P311-15D8392 Manu # 6175AL-5 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $166.73

Type II Alum. Power Steering Pump
Type II Alum. Power Steering Pump; M16 And 5/8 in. OD 90 Deg Return; M8x1.25 Threaded Hole Mtg; Alum; For Street Rods/Custom Vehicles w/Limited Engine Space; Factory Cast PLUS+;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
Features:
- Compact Size Ideal For Tight Applications
- Requires A Press Fit Pulley Not Included
- 1200 PSI Rated To Work With Most Gear Boxes
- 3 GPM Flow
- Top Pressure Port
- Clockwise Rotation Only
- 100% New Components
- Made In The U.S.A.
Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Tuff Stuff Performance Accessories

Vehicle

Power Steering Pump Tuff Stuff Performance Accessories

Part # P311-1337CFE Manu # 6175ALP Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $195.31

Type II Alum. Power Steering Pump
Type II Alum. Power Steering Pump; AN-6 And AN-10 Fitting; 8mm Through Hole Mounting; Aluminum; For Street Rods/Custom Vehicles w/Limited Engine Space; Polished;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
Features:
- Compact Size Ideal For Tight Applications
- Requires A Press Fit Pulley Not Included
- 1200 PSI Rated To Work With Most Gear Boxes
- 3 GPM Flow
- Top Pressure Port
- 100% New Components
- Made In The U.S.A.
- Clockwise Rotation Only
Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Tuff Stuff Performance Accessories

Vehicle

Power Steering Pump Tuff Stuff Performance Accessories

Part # P311-53C0A5B Manu # 6175AL-1 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $169.40

Type II Alum. Power Steering Pump
Type II Alum. Power Steering Pump; GM Pressure Slip; M8x1.25 Threaded Hole Mounting; Aluminum; For Street Rods/Custom Vehicles w/Limited Engine Space; Factory Cast PLUS+;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
Features:
- Compact Size Ideal For Tight Applications
- Requires A Press Fit Pulley Not Included
- 1200 PSI Rated To Work With Most Gear Boxes
- 3 GPM Flow
- Top Pressure Port
- Clockwise Rotation Only
- 100% New Components
- Made In The U.S.A.
Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Tuff Stuff Performance Accessories

Vehicle

Power Steering Pump Tuff Stuff Performance Accessories

Part # P311-18E965D Manu # 6176A Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $223.33

Saginaw Style Power Steering Pump
Saginaw Style Power Steering Pump; Univ. Fit; 5/8 in. Keyed Shaft; 1200 PSI; 5/8-18 SAE Pressure Fittings; 3/8 in.-16 Mtg. Holes; Chrome;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
Features:
- Includes Reservoir/Pump Assembly/Billet Cap/Dipstick/Hardware
- Requires A Bolt On Pulley Which Is Not Included
- Clockwise Rotation Only
- 1200 PSI Rating
- 3 GPM Flow
- 100% New Components
- Made In The U.S.A.
This GM style Saginaw pump features all new components including reservoir and pump assembly. It also includes a billet chrome cap, a new dipstick and hardware. Pumps are 1200 PSI rated @ 2.9-3.1 GPM to work with most gearbox systems. An optional 850 PSI valve is available for Mustang II rack and pinion systems.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Tuff Stuff Performance Accessories

Vehicle

Power Steering Pump Tuff Stuff Performance Accessories

Part # P311-07C006D Manu # 6175AL Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $172.49

Type II Alum. Power Steering Pump
Type II Alum. Power Steering Pump; AN-6 And AN-10 Fitting; 8mm Through Hole Mounting; Aluminum; For Street Rods/Custom Vehicles w/Limited Engine Space; Factory Cast PLUS+;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
Features:
- Compact Size Ideal For Tight Applications
- Requires A Press Fit Pulley Not Included
- 1200 PSI Rated To Work With Most Gear Boxes
- 3 GPM Flow
- Top Pressure Port
- 100% New Components
- Made In The U.S.A.
- Clockwise Rotation Only
Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Tuff Stuff Performance Accessories

Vehicle

Power Steering Pump Tuff Stuff Performance Accessories

Part # P311-1C16490 Manu # 6188B Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $214.95

Saginaw Style Power Steering Pump
Saginaw Style Power Steering Pump; Univ. Fit; 3/4 in. Press Fit Shaft; 1200 PSI; 5/8-18 SAE Pressure Fittings; 3/8 in.-16 Mtg. Holes; Black;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
Features:
- Includes Reservoir/Pump Assembly/Billet Cap/Dipstick/Hardware
- Requires A Press Fit Pulley
- 1200 PSI Rating
- 3 GPM Flow
- 100% New Components
- Made In The U.S.A.
This GM style Saginaw pump features all new components including reservoir and pump assembly. It also includes a billet chrome cap, a new dipstick and hardware. Pumps are 1200 PSI rated @ 2.9-3.1 GPM to work with most gearbox systems. An optional 850 PSI valve is available for Mustang II rack and pinion systems.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Tuff Stuff Performance Accessories

Vehicle

Power Steering Pump Tuff Stuff Performance Accessories

Part # P311-451672B Manu # 6170AL-2 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $180.09

Type II Alum. Power Steering Pump
Type II Alum. Power Steering Pump; AN-6 And AN-10 Fitting; M8x1.25 Threaded Hole Mtg; Btm Pressure Port; For StreetRods/Custom Vehicles w/Limited Engine Space; Factory Cast PLUS+;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
Features:
- Compact Size Ideal For Tight Applications
- Requires A Press Fit Pulley Not Included
- 1200 PSI Rating
- 3 GPM Flow
- Bottom Pressure Port
- Clockwise Rotation Only
- 100% New Components
- Made In The U.S.A.
Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Tuff Stuff Performance Accessories

Vehicle

Power Steering Pump Borgeson

Part # P311-167CBDA Manu # 800329 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $234.76

P/S Pump; Saginaw Self Contained; Black With Straight Return Tube. Includes Sing
P/S Pump; Saginaw self contained; black powder coated reservoir with straight return tube. Includes single row v-belt pulley.
Product Attributes:
- Hose Port Type: 0.625 In. -18 Inverted Flare
- Inlet Diameter: 0.375 In.
- Outlet Diameter: 0.625 In.
- Pulley Attachment Type: Press-on
- Pulley Included: No
- Pump Type: Hydraulic
- Reservoir Included: Yes
- Shaft Type: 0.750 In. Press On
- Thread Size: 10.00 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.g
Features:
- Power Steering Pump
P/S Pump, Saginaw self contained, black powder coated reservoir with straight return tube. Includes single row v-belt pulley.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Borgeson

Vehicle

Power Steering Pump Borgeson

Part # P311-1CEF8E2 Manu # 800323 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $182.51

P/S Pump with two returns for Hydro-Boost brake applications.
P/S Pump for Hydro-Boost brake applications. This Hi-Flow power steering pump has two return fittings; has had the pressure; flow optimized for hydro-boost brake applications. Ships w/adapter to fit both flare and o-ring hose connections.
Product Attributes:
- Hose Port Type: 16mm X 1.500 In. O-ring
- Inlet Diameter: 0.375 In.
- Outlet Diameter: 16.000 In.
- Pulley Attachment Type: Press-on
- Pulley Included: No
- Pump Type: Hydraulic
- Reservoir Included: Yes
- Shaft Type: 0.750 In. Press On
- Thread Size: 10.00 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.g
Features:
- Power Steering Pump
P/S Pump for Hydro-Boost brake applications. This Hi-Flow power steering pump has two return fittings and has had the pressure and flow optimized for hydro-boost brake applications. Ships with adapter to fit both flare and o-ring hose connections.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Borgeson

Vehicle

Power Steering Pump Borgeson

Part # P311-3226FEB Manu # 800312 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $182.51

P/S Pump; Saginaw Self Contained; Painted Black; Mustang Pressure
Saginaw self contained power steering pump with keyway shaft. Painted black. Preset for Mustang R/P pressure.
Product Attributes:
- Hose Port Type: 0.625 In. -18 Inverted Flare
- Inlet Diameter: 0.375 In.
- Outlet Diameter: 0.625 In.
- Pulley Attachment Type: Bolt-on
- Pulley Included: No
- Pump Type: Hydraulic
- Reservoir Included: Yes
- Shaft Type: 0.625 In. Key Way Shaft
- Thread Size: 0.375 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.g
Features:
- Power Steering Pump
These pumps are remanufactured to precise tolerances exceeding OEM specifications. Pumps are available with either a painted black or brilliant chrome reservoir. We also offer pumps preset to the lower operating pressure for Mustang rack and pinions.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Borgeson

Vehicle

1989 Merkur XR4Ti Power Steering Pump Cardone - w/Reservoir

Part # P311-1CAFB63 Manu # W0133-3016949 Condition: Remanufactured

Qty:

In Stock & Ready to Ship

Core Price: $18.00 Best Price: $86.97

Remanufactured
w/Reservoir

Brand: Cardone

Vehicle
1989 - Merkur XR4Ti

Finish Selecting Your Vehicle to Shop For Your Power Steering Pump

Shop By Brand

Best Selling Genuine Merkur Power Steering Pumps

Shop Merkur Power Steering Pumps

Finish Selecting Your Vehicle to Shop For Your Power Steering Pump

Shop By Brand

Best Selling Genuine Merkur Power Steering Pumps