Porsche - 356IDF REDLINE WEBER Proline Ultimate Street Performance Conversion. Replacement conversion for pre-1973 California exempted vehicles. Maintains factory crossbar, with supplied REDLINE levers. Supplied REDLINE manifold upgrade. Warranty & Technical support are only handled through the manufacture, REDLINE WEBER @ 8007332277 ext.7457. DO NOT CONTACT THE SUPPLIER FOR WARRANTY OR RETURN, PERFORMANCE APPLICATION NOT SUBJECT TO RETURN.
A Whining Pump Is Usually Caused By Air In The System. Remove Reservoir Lid And Inspect Fluid Level And Condition. If Fluid Has Foam Or Air Bubbles Present, You Must Bleed The System Again. Some Systems Are Very Difficult To Bleed Manually And May Require
I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
The End Of The Original Pump's Input Shaft Enlarged Causing The Pulley Hole To Increase During Removal. The Pulley Must Be Replaced.
The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
Why Is The Pump Making A Whining Noise All Of The Time?
Features and Benefits:
Designed To Extend The Life Of The Steering System
In-line Filter With Serviceable Filter Element
Patented Built-in Bypass That Filters Up To 190 Micron Particles
Sure-grip Barb Connections Are Included To Ensure Proper Hose Fitment
Hose Inner Diameter (in):3/8"
Inlet Diameter (in):0.395"
Outlet Diameter (in):0.397"
CARDONE MagnaPure Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8", 1/2", and 5/8" sizes to cover a most vehicle applications.
California Proposition 65:Warning: Cancer And Reproductive Harm
Posi Quiet brake pads are manufactured using the same positive molding process utilized by Original Equipment suppliers. Positive molding uses extreme pressure to compress the friction material and bond it to the backing plate. This process assures consistent friction material density throughout the pad, resulting in even wear and performance characteristics throughout the life of the brake pad. The number one cause for customer returns are noise and vibration. Centric Parts has recognized these issues and is constantly improving its products to eliminate these issues. Posi Quiet brake friction features either precision cut or shaved backing plates and mechanically attached shims; these small details ensure proper fitment in the caliper and virtually eliminate noise associated with pad vibration. In addition to these features Centric Parts has added a scorching process to all of its Posi Quiet brake pads. This additional process forces any impurities out of the friction material and pre-burnishes the pads to greatly accelerate the break-in process. All Posi Quiet brake pad friction formulations are asbestos free and are available in three application specific compounds complete with all necessary hardware for installation where applicable.