802.589.0911 Live Chat With Us

Buy Discount Plymouth Horizon Parts

Finish Selecting Your Vehicle

Choose a Year for your Plymouth Horizon

  • 1990
  • 1989
  • 1988
  • 1987
  • 1986
  • 1985
  • 1984
  • 1983
  • 1982
  • 1981
  • 1980
  • 1979
  • 1978

Showing 1 - 10 of 3,658 Products.

Refine Your Search

KYB
1980 Plymouth Horizon Suspension Strut Bellows - Front KYB - Strut Boots

P311-276FF86    SB101  New

143057 , 63619

Qty:
$14.56
KYB Suspension Strut Bellows  Front
  • JOUNCE BUMPER AND BELLOWS
  • Strut Boots
  • Product Attributes:
    • FEATURE AND BENEFIT 1: Superior Quality Boot Helps Protect The Strut Shaft From Leak-causing Dirt And Debris
    • FEATURE AND BENEFIT 2: Poly Foam Bumper Prevents The Strut From Bottoming Out
    • FEATURE AND BENEFIT 3: Built With Design And Quality That Matches Or Exceeds Oe
    • FEATURE AND BENEFIT 4: Protects The Upper Seal And Bushing
  • KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: KYB
Position: Front
Additional Fitment Information:
Vehicle Position
1980 - Plymouth Horizon Front
Anco
1990 Plymouth Horizon Windshield Wiper Blade - Rear Anco - 31-Series

P311-3085C22    31-18  New

60-018-3 , 18-58 , 1385688 , PRL-18 , 60-018-8 , RX30118 , 18-52 , PRL-18-2 , AA-2518 , 22110158 , 18-1 , PR-18-2 , 60-018-1 , 40718A , 359-182 , 91127-147MC , 2889960 , VC8UB-17528-C , 393840 , 5049917 , 2580418 , 15595485 , 40318 , 533992 , 56001133 , 90240147 , C1VZ-17528-B , WW-1801 , 9860146 , 358-180 , 60-1877 , 2771913 , PRL-18-3 , 3717 , 2580419 , 33-183 , 4718 , 2771914 , D4ZZ-17528-A , 60-1897-1 , 541699 , 39-182 , SBV182 , 18-53 , 18-10 , 18-510 , WW-1802 , WW-1803 , 500-18 , 60-018-2 , 5049912 , 18-51 , SBV181 , 4389062 , 18-2 , D3AZ-17528-A , WCB18 , C4SZ-17528-A , D6ZZ-17528-B , 38-180 , D6ZZ-17528-A , 5049938 , DL-18 , 589697 , 18-8

Qty:
$6.19
Anco Windshield Wiper Blade  Rear
  • ANCO Conventional 31 Series Wiper Blades 18
  • ; Original Blade Type To install, use included 7mm Bayonet Adapter (part number 48-12)
  • 31-Series
  • Product Attributes:
    • Adapters Included: Yes
    • Adapters Required: No
    • Blade Material: Duraklear - Natural Rubber
    • Blade Type: Conventional/bridge
    • Frame Color: Black
    • Frame Material: Metal; Plastic
    • Pressure Point Quantity: 6
    • Refillable: Yes
    • Wiper Blade Connection Type: J-hook: 9x3mm; Classic Side-pin: 3/16"; Classic Bayonet: 7mm
  • The 31-Series KwikConnect wiper blade boasts reliable wiper performance.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Anco
Position: Rear
Additional Fitment Information:
Vehicle Position
1990 - Plymouth Horizon Rear
Premium Guard
1990 Plymouth Horizon Engine Oil Filter 4 Cyl 2.2L Premium Guard - Standard Life

P311-42378AC    PO241  New

C-3614 , PH2821A , FL-271 , JL241 , QL10241 , 7058149 , 61215 , OC338 , MO3614 , CO2835 , PLB2951 , PZ-21 , V241 , P241 , OF-241 , D366 , PPG241 , 9091520002 , PF2835 , PO241 , 7984778 , AT1220338 , ASF57 , G-80 , M2951 , WS-3614 , HL3614 , COS3614 , MD1003 , ML 1003 , PH2859 , PGO-241 , 041-0670 , GL10241 , 10-01337 , FP3614 , 130 , 3330 , IOF3614 , PO-21 , 92269 , VO25 , A-0211-001 , SFO241 , L10241 , 17-1708-4 , LF05-14-302A , M241 , HF28783 , 1269 , PN3614 , OF10241 , T-29 , ESOF361409EX , R1348 , 1AMFL00004 , BMJ241 , L-335 , FE213 , 04E 115 561 B , OF-3614 , DW-241 , 9144445 , 21348 , L11-1350 , C2Z21964 , LR025306 , PG241 , PH2835 , 618-51348 , HP241 , X10185 , 1S7Z-6731-DA , L241 , ML3614 , GP-58 , PG241BF , 115010-2191 , LFP55-0335 , AL3614 , L127 , V3614 , W0133-1633190-KN , PF1212 , PH241 , L35098 , CF2951 , 2647020 , 16510-60B11 , C241 , 85335 , WPH2835 , 1348 , 16510-82703 , B131 , S3614 , CAS3614 , TO3614 , POF241 , LF-2835 , B7020 , SL10241 , HP-1002

Qty:
$3.71
Premium Guard Engine Oil Filter
  • Standard Life
  • Product Attributes:
    • Anti-Drain Back Valve: Yes
    • Burst Pressure: 218
    • Bypass Relief Valve Setting: 17
    • Filter Media Material: Enhanced Cellulose
    • Filter Type: Spin-on
    • Gasket Inside Diameter: 2.38 In
    • Gasket Outside Diameter: 2.71 In
    • Gasket Thickness: 0.16 In
    • Gasket Type: Nbr
    • Height: 3.41 In
    • Inside Thread Size: 3/4"-16unf-2b
    • Micron Rating: 25
    • Outer Diameter Bottom: 2.93 In
Brand: Premium Guard
Additional Fitment Information:
Vehicle Block Engine CID CC
1990 - Plymouth Horizon L 4 Cyl 2.2L 135 -
Premium Guard
1981 Plymouth Horizon Engine Oil Filter 4 Cyl 1.7L Premium Guard - Standard Life

P311-20E6352    PO252  New

JL252 , QS2870A , TO2870A , T-25 , ML2870A , PO252 , PO-12 , FL-401 , PG252 , 19160691 , GL20252 , PN2870A , C-2870 , 1393 , CO414 , L20064 , PL-13 , LF3499 , L10 , HL2870A , M252 , HPZ-12 , PF60 , PH561 , 207976908 , 3232126 , AL2870A , 652 , SH518 , VO11 , FP2870A , QL20252 , S2870A , MO2870A , PLB2870 , SF-213 , 3870 , D489 , 3421 , R1342 , FE166 , OC264 , 17-1853-6 , 85034 , C252 , PF227 , LF280 , PG252F , 11 42 1 266 773 , M2870 , HP-2005 , J3232126 , SFO252 , M1-205 , 21342 , AW29 , PH2861 , PH-227 , 1342 , OF252 , CF493 , E252 , WS-2870 , M-46 , L-323 , ASF34 , OF-213 , B178 , WD-290 , 15208-H1010 , A-0201-006 , ESOF2870A09EX , IOF2870 , MD2000 , L-42FC , 10-00025 , 1526188 , 7058289 , S252 , SL20252 , GP28 , OF20252 , OF09 , W 712/1 , OF-2870 , MO561 , PPG252 , PGO-252 , 2735E-6714-B , 041-0698 , PH252 , SO-252 , 150-2013 , V252 , OF2957 , V2870A , 136 , 92034 , 034 115 561A

Qty:
$3.75
Premium Guard Engine Oil Filter
  • Standard Life
  • Product Attributes:
    • Anti-Drain Back Valve: Yes
    • Burst Pressure: 218
    • Bypass Relief Valve Setting: 17
    • Filter Media Material: Enhanced Cellulose
    • Filter Type: Spin-on
    • Gasket Inside Diameter: 2.38 In
    • Gasket Outside Diameter: 2.71 In
    • Gasket Thickness: 0.16 In
    • Gasket Type: Nbr
    • Height: 4.04 In
    • Inside Thread Size: 3/4"-16unf-2b
    • Micron Rating: 25
    • Outer Diameter Bottom: 2.93 In
Brand: Premium Guard
Additional Fitment Information:
Vehicle Block Engine CID CC
1981 - Plymouth Horizon L 4 Cyl 1.7L 105 -
Stant
1990 Plymouth Horizon Radiator Cap 4 Cyl 2.2L Stant - OE Type Radiator Cap

P311-21E3E1F    10231  New

991516 , 3673891 , 17111152062 , 15064718 , 10036879 , 10409635 , E3SZ8100A , E6LY8100A , 8-06410-785-0 , CAC3674 , D7AZ 8100 A , 703-1699 , D5VY 8100 A , E8DZ8100A , 443865C2 , E8DZ 8100 A , E6DZ8100A , 2998982 , E6DZ 8100 A , RS-64 , 0005010215 , RC54 , D5VY8100A , 4039936 , 3781830 , 06410685 , RC 96 , E2FZ8100A , E1FZ 8100 A , RC 54 , 7616 , 31523 , D7AZ8100A , 6410785 , E6LH8100AA , 10049770 , EIFZ 8100 A , E1FZ8100A , 7B0121321 , 4266968 , 25730158 , 8064107850 , RC96 , A1235010115 , 1235010015 , 55111074AA , 15953298 , RC49 , 1497193 , T-10 , 8-15982-188-0 , 06410487 , 4140464 , 6410985 , A 1235010015 , E3SZ 8100 A , E6DZ 8100 B , 414 0464 , 3412851 , A170241 , E6LH 8100 AA , 6410456 , E6LY 8100 A , 4677493AA , 17 11 1 152 070 , E35Z 8100 A , RC27 , J5352954 , GRC156 , 55111074AB , 7B0121321A , 82931 , 4682828 , A 0005010215 , 55111 074AA , RC-27 , 5900584 , 8159821880 , RC36 , 52079880AA , A0005010215 , D6AZ8100A , 10231 , GRC110 , A 1235010115 , RS64 , A 0005010015 , D6AZ 8100 A , 14099684 , 55111 074AB , 8064104270 , GRC181 , 17111151700 , 09975778 , 7031699 , A1235010015 , A0005010015 , 33042 , RC 49 , RR31 , E2FZ 8100 A , 644131 , T16V , J590 0584 , 15982188 , 6410640 , 6410427 , 4401493 , E6DZ8100B , 426 6441 , 3574154 , 5017 468AA , 46043 , EIFZ8100A , J5358177 , 1235010115 , 17 11 1 151 700 , 468 2828 , 10283897 , 321121321B , T10 , RC-36 , 54819976254 , RR-31 , RC 97 , 5017468AA , 17111152070 , 4266441 , RC97 , 8-06410-427-0 , 426 6968 , 0005010015 , 6410570 , 06410782 , 5352954 , 8942287480 , J5900584 , E35Z8100A

Qty:
$5.80
Stant Radiator Cap
  • ; Pressure Rating 16 psi
  • OE Type Radiator Cap
Brand: Stant
Additional Fitment Information:
Vehicle Block Engine CID CC
1990 - Plymouth Horizon L 4 Cyl 2.2L 135 -
Timken
1990 Plymouth Horizon Manual Transmission Input Shaft Bearing - Rear Timken

P311-260033D    SET5  New

Qty:
$9.91
Timken Manual Transmission Input Shaft Bearing  Rear
  • Tapered Roller Bearing Cone & Cup Assembly
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Timken
Position: Rear
Additional Fitment Information:
Vehicle Trans Type Transmission Trans. Speed Position
1990 - Plymouth Horizon Transaxle Manual 5 Rear
Trico
1978 Plymouth Horizon Windshield Wiper Blade - Rear Trico - TRICO Exact Fit

P311-0312950    18-1  New

Qty:
$9.25
Trico Windshield Wiper Blade  Rear
  • 18" TRICO Exact Fit Wiper Blade
  • TRICO Exact Fit
  • Product Attributes:
    • Blade Style: Conventional
    • Frame (Blade) Material: Steel
    • Rubber Element Formulation: Natural Rubber
  • Provides original factory quality for vehicles with metal conventional wipers
Brand: Trico
Position: Rear
Additional Fitment Information:
Vehicle Position
1978 - Plymouth Horizon Rear
K&N
1980 Plymouth Horizon Engine Oil Filter 4 Cyl 1.7L K&N - Performance Gold Oil Filter

P311-0F56602    HP-1002  New

C2Z21964 , LR025306 , MO241 , 51785 , XG3614 , 9091520004 , 04E115561H , 491056 , LF0514302B , TG3614 , CH9614 , LF0514302A , 90915YZZD1 , PF1787 , 57181 , PH3614 , 5205002 , XG9614 , PF1245 , EX3614 , PF53 , TG16 , TG9614 , XG16 , SS1002 , PH6022 , 51348 , PH7575 , 57023 , PS1002 , 1220645 , PH16 , PH9342 , M1102A , BE8Z6731AB , FL910S , PH2951 , L10241 , FL793 , M1102 , 51215 , FL910 , 5205002S , 51391 , 04E115561 , PH9566 , L10028 , HP7 , 9091520003

Qty:
$16.29
  • Oil Filter
  • ; H-3.75 in.; OD-3 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-14 Premium Oil Filter w/Wrench Off Nut; Spin On
  • Performance Gold Oil Filter
  • Product Attributes:
    • Anti-Drain Back Valve: Yes
    • Bypass Valve: Yes
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Item Height: 3.750 In. (95mm)
    • Item Weight: 0.800 Lbs. (0.4 Kg)
    • Outside Diameter: 3.000 In. (76mm)
    • Package Material: Paperboard
    • Package Type: Box
    • Product Box Height: 4.000 In. (102mm)
    • Product Box Length: 3.190 In. (81mm)
    • Product Box Width: 3.190 In. (81mm)
    • PSI Relief Valve: 11-14
    • Removal Nut: Yes
    • Removal Nut Size: 1.000 In.
    • Style: Canister
    • Thread Size: .750 In. - 16
    • Title: K&n Hp-1002 Oil Filter
    • WARNING CA Proposition 65: No
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Brand: K&N
Additional Fitment Information:
Vehicle Block Engine CID CC
1980 - Plymouth Horizon L 4 Cyl 1.7L 105 -
Mopar
1986 Plymouth Horizon Engine Oil Filter Mopar

P311-59B2AAD    W0133-1814330  New

Qty:
$30.62
Mopar Engine Oil Filter
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Spin-On
Brand: Mopar
Additional Fitment Information:
Vehicle
1986 - Plymouth Horizon
Mahle
1986 Plymouth Horizon Engine Oil Filter Mahle - Spin-On

P311-2069BA5    W0133-1814330  New

Qty:
$21.75
Mahle Engine Oil Filter
  • Original
  • Spin-On
Brand: Mahle
Additional Fitment Information:
Vehicle
1986 - Plymouth Horizon

Showing 1 - 10 of 3,658 Products.


Latest Plymouth Horizon Repair Guides & Installation Advice

CarJunky AutoAdvice

Left front brake won't work

Showing 8 out of 8 Posts
Question From bill7947 on Left front brake won't work

I have a 1980 Plymouth Horizon race car. The car set for six years. When I raced it again, the brakes pulled. I raised the front and checked the front brakes. I noticed that the left front brake was not working. I replaced the brake caliper, but I am unable to get any brake fluid to come out at the bleed screw, when I try to bleed the brakes. The right side bleeds ok. Is there another problem that could cause the left front brake to not work and for there to be to brake fluid present at the bleeder screw?

Response From Loren Champlain Sr

Bill; It is very possible that you may have a faulty brake hose going to that caliper. The hose can delaminate internally. See if you can get fluid at the fitting where the steel line connects to the hose.
btw; I'm confused; Horizon/race car?

Response From bill7947

Loren, thank you for providing your suggestion, I will definitely check the hose. As for the Horizon/race car, it is an obsure class in NHRA drag racing. Not too many people run in the class anymore. I will be racing at the NHRA National Event in Las Vegas this weekend, maybe with only brakes at three wheels. Thank you, Bill

Response From Loren Champlain Sr

>>it is an obsure class in NHRA drag racing<< No doubt! What kind of times/speed? I'm almost falling asleep thinking about it.

Response From bill7947 Top Rated Answer

I ran a 16.73 ET at 79.30 MPH last month at a NHRA race at Bakersfield. Before you laugh too hard, I run in stock eliminator and the modifications allowed to the car are severely restricted. That run qualified me number 10 in a field of 54 stock eliminator entries, I hope that gives me some credibability. I was also fighting with brakes that would not hold the car at the starting line, I normally leave at full throttle, and brakes that were making the care weave all over the shut off area. By the way, I like your truck. I have a 2005 that looks like the same model.

Response From Loren Champlain Sr

Okay. I'm impressed. That's pretty decent, considering. That's usually when I go get a beer, right after the Funny Cars and Fuelers run. But, I'll watch for you at Vegas. I'm sure it will be televised. What color is your car, or how will I know it's you?

Response From bill7947

They will not show my class on TV. They save the TV coverage for the Fuelers, Funnys and Pro Stockers. The car is a brown 1980 Plymouth 4-door Horizon, it cannot get much worse that that! The car has been named the little brown t*** by competitors I have beaten. It will be the slowest car, based on elapsed times, in competition.

Response From Loren Champlain Sr

You mentioned earlier that you leave the line under full power. Are you suggesting that it is an automatic? OH MY. I'm sorry. Just can't help it. Good luck to you.

dash an running lights issue

Showing 4 out of 17 Posts | Show 13 Hidden Posts
Question From james24 on dash an running lights issue

hey guys needing some help read tons of forums bout dash/running lights not working ect but none helped so im working on a 1990 plymouth horizon, the problem is the trail/running lights an dashboard lights are not working when the headlights are turned on.The fuses an bulbs are fine an i tried 2 new light switches just to make sure it was not a faulty unit an they did nothing for it. So was thinking maybe a wires touching or bad connection an what not but what blows my mind is when i push the light switch an the headlights turn off BUT before it clicks to let me know the lights are off their is a sweet spot were the dashboard lights an running lights work properly! I can even use this dimmer switch to adjust the brightness of the dashboard but only at that certain spot, i tried tightening the female connector that the light switch plugs into cause they were a little loss thinking it could be something that simple but did not help at all. Im completely in the dark on this one guys any advice would be greatly appreciated!
Thanks
James

Response From Sidom

Before we go to far, you need to clarifiy if these are new switches out of the box or new switches out of the wrecking yard which would be referred to as "used switches"...

If they are new then they could be bad switches, it happens.

Maybe one of the guys could post a wiring diagram of the circuit for you. Just find the circuit that power those lights and see if you are losing power or ground when the switch is on & which one you get back when you go to the "sweet spot" , that will tell you which circuit is giving you the trouble..

Response From james24

they were new switches from the box that why i said i tried a few ones at the store since the new one i bought did not work they let me try 2 new ones+ the one i bought before hand to see if it would work.But since the running lights work(sorta) that rules out the simple stuff right? like bulbs fuses the switch an possible the ground? Thanks for the replies guys if you all need any other information just let me know im out messing around with it as we speak.
James

Response From Hammer Time Top Rated Answer

If you can manipulate the switch and get the lights to work normally, something is wrong with the switch.

Response From james24

Was the original switch that would do that,and it would only turn on the running lights right after the head lights went off an before it clicked to let you know the headlights were turned off so that how i came to the conclusion the switch was bad the new ones would not work like that an i currently have the new one installed just cause im sure it needed it everything on the car that i know of is original, but i figured letting you all know that the old switch would turn the running lights on at that certain point would give you a better clue of what the problem is cause at the moment im completely in the dark ive got no idea were to go from here.
James

Response From Sidom

If you can have a diagram, see what wire goes to the running lights off the switch and check that wire for power when the switch is all the way on and then when you put it in the spot that makes it work. Is there 12v on that wire both times or only in the sweet spot?

Response From james24

Ok so i tested the volts with a multimeter were the light switch hooks into an when the running lights are on the Solid Green wire has no juice, an when the headlights are on the peach, solid red an black an white stripped wires had no juice.i tested the running lights too in the back an obviously they had juice when it was in the (sweetspot) but none when the head lights were turned on. I dont have a wiring diagram but is there a way to jump the wires of one that has power to another safely an see if that would make the headlights work with the running lights on or vice versa?

Response From Sidom

Take the connecter off the switch. Turn the key on & check all the terminals with your voltmeter and a test light (if you have one).
Tell me how many terminals are in the connecter & how many of those terminals have 12v on them & how many of them will light up a test light.

Response From james24

4 out of 9 had 12v an my test light has a blown bulb

Response From Sidom

I really can't find a good diagram on this...

Check your connecter, there should be a tan wire that has 12v with the key on.......There should be a black/yellow wire. This for the rear park lights. If you have a fused jumper, you could jump between those 2 terminals & the park lights should come on

Response From james24

with the car on the tan an black/yellow wire both dont have any power running to it an this is the best i could find

link deleted not allowed its chassis wiring fig.25-26 at teh bottom closest one to my 1990 horizon. But hey man i really appreciate you taking your time to try an help me out!
James

Response From james24

(didnt know you couldnt post links lol )ok heres what i did with the headlights on the solid green wire i touched a wire to it an to the black/yellow wire an the tailights an headlights worked, also did the same to the tan wire the headlights an tail lights worked again an also did it to the red wire the headlights an tail lights came on again though i tried all 3 of the wires that had no power with the headlights on but none of the three let the dashlight come on figured id let you know what i did to make em work for a sec so maybe you can figure it out

Response From Sidom

Like I said just double check all the fuses to be sure.....A test light would be good or use your voltmeter......make sure there isn't more than one box

Response From Hammer Time

Don't post links. Your car wasn't on that page anyway. Close isn't good enough with a wiring diagram.

Response From Sidom

Check all your fuses again.....I believe that one should have a 5 amp fuse for it

Response From Hammer Time

Sounds like you got a run of junk switches.

Response From nickwarner

Are you using new switches or used ones? My local O-Reilly shows 3 different brands of switch for this, price range of $19-$29.