
P311-5D4E9CD 74-60006 New
MD151055 , MD170165 , MD183609 , MD183609 , MD183618 , MD183618 , MD357338 , MD357388 , MD357388
- Remanufactured Mass Air Flow Sensor
- Product Attributes:
-
- Bracket Included: No
- Connector Gender: Male
- Connector Quantity: 1
- Connector Shape: Rectangular
- Contains Electronic Components: Circuit Board
- Does it require SDS: No
- E-Waste: Yes
- FAA_A1: A Malfunctioning Maf/vane Air Flow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
- FAA_A2: Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Check For Diagnostic Trouble Codes With A Scanner.
- FAA_A3: Over-voltage Sources From Relays, Short Circuited Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Ch
- FAA_A4: The Most Common Causes Are: A Worn Vane Assembly, A Cracked Housing, Or A Cracked Printed Circuit Board. These Conditions All Require Unit Replacement.
- FAA_A5: The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
- FAQ_Q1: How Can A Malfunctioning Maf/vane Air Flow Sensor Affect My Vehicles’ Operation?
- FAQ_Q2: How Can I Determine If The Maf/vane Air Flow Sensor Is Bad?
- FAQ_Q3: What Are The Most Common Causes Of Maf/vane Air Flow Sensor Problems?
- FAQ_Q4: What Goes Bad In Vane Air Flow Type Units?
- FAQ_Q5: What Goes Bad In Maf Sensors?
- Grade Type: Regular
- Housing Included: Yes
- Is Item A Chemical: No
- Is Or Contains A Battery: No
- Is Or Contains A Bulb: No
- Is Prop Sixty Five Affected: No
- Is the item CARB affected: No
- Mounting Bracket Included: No
- Mounting Hardware Included: No
- Mounting Hole Quantity: 4
- Mounting Type: Bolt-on; Hose Clamp
- Outlet Connection Diameter:
- 107.8
- 4.4
- Product Condition: Remanufactured
- Sensor Type: Resistor
- Terminal Gender: Male
- Terminal Quantity: 7
- Terminal Type: Pin
- Wiring Harness Included: No
-
Features:
- 100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
- On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
- All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
- Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle’s engine control management system.
- Components are rated to handle demanding temperature variations for optimum reliability in every environment.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
- CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.