802.589.0911 Live Chat With Us

Finish Selecting Your Vehicle to Shop For Your Mass Air Flow Sensor

Choose a Year for your Mitsubishi 's Mass Air Flow Sensor

  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011
  • 2010
  • 2009
  • 2008
  • 2007
  • 2006
  • 2005
  • 2004
  • 2003
  • 2002
  • 2001
  • 2000
  • 1999
  • 1998
  • 1997
  • 1996
  • 1995
  • 1994
  • 1993
  • 1992
  • 1991
  • 1990
  • 1989
  • 1988
  • 1987
Show More Years

Shop By Brand

The Following brands are available based on your search.

  • Beck Arnley
    Beck Arnley
  • Cardone
    Cardone
  • Delphi
    Delphi
  • Spectra
    Spectra
  • Standard Ignition
    Standard Ignition
  • Walker
    Walker

Best Selling Genuine Mitsubishi Mass Air Flow Sensors

  • We Stock the following top leading brands, including Cardone, Spectra, Beck Arnley
  • Constantly Updated Inventory of Mitsubishi Replacement Mass Air Flow Sensor Parts

We stock Mass Air Flow Sensor parts for most Mitsubishi models, including 3000GT, Diamante, Eclipse, Galant, Lancer, Mirage, Montero, Montero Sport, Outlander, Outlander Sport.


Cardone
2000 Mitsubishi Eclipse Mass Air Flow Sensor Cardone - New Mass Air Flow Sensor

P311-16D6ABF    86-60013  New

MD336501

Qty:
Cardone Mass Air Flow Sensor
  • New Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • Guaranteed O.e. Fit And Function.
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE Engineered Technology ensures that all CARDONE® New Mass Air Flow Sensors precisely track O.E. output curves and maintain strict tolerances to ensure accurate scan tool readings for proper operation. Every component is rated to handle a broad range of environmental conditions, including temperature and altitude.
Brand: Cardone
Additional Fitment Information:
Vehicle
2000 - Mitsubishi Eclipse
Cardone
2006 Mitsubishi Eclipse Mass Air Flow Sensor Cardone - New Mass Air Flow Sensor

P311-0DD1F94    86-50046  New

MR985187

Qty:
89.23
Cardone Mass Air Flow Sensor
  • New Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • Guaranteed O.e. Fit And Function.
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE Engineered Technology ensures that all CARDONE® New Mass Air Flow Sensors precisely track O.E. output curves and maintain strict tolerances to ensure accurate scan tool readings for proper operation. Every component is rated to handle a broad range of environmental conditions, including temperature and altitude.
Brand: Cardone
Additional Fitment Information:
Vehicle
2006 - Mitsubishi Eclipse
Cardone
1999 Mitsubishi Montero Sport Mass Air Flow Sensor 4 Cyl 2.4L Cardone - Reman. Mass Air Flow Sensor

P311-25468B5    74-60013  Remanufactured

MD336501

Qty:
$17.10 113.46
Cardone Mass Air Flow Sensor
  • Remanufactured Mass Air Flow Sensor
  • Reman. Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • 100% Re-solder Of Critical Components Ensures Superior Electrical Connections, No Intermittent Failures And Longer Product Life.
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • On-car Vehicle Validation Routines Ensure That Modules Meet All Form, Fit, Durability And Performance Requirements.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE® Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1999 - Mitsubishi Montero Sport L 4 Cyl 2.4L - 2351
Cardone
1989 Mitsubishi Mirage Mass Air Flow Sensor 4 Cyl 1.5L Cardone - Reman. Mass Air Flow Sensor

P311-0EB8488    74-60002  Remanufactured

MD118125

Qty:
$22.50 120.06
Cardone Mass Air Flow Sensor
  • Remanufactured Mass Air Flow Sensor
  • Reman. Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • 100% Re-solder Of Critical Components Ensures Superior Electrical Connections, No Intermittent Failures And Longer Product Life.
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • On-car Vehicle Validation Routines Ensure That Modules Meet All Form, Fit, Durability And Performance Requirements.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE® Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1989 - Mitsubishi Mirage L 4 Cyl 1.5L 90 1468
Cardone
1993 Mitsubishi Expo LRV Mass Air Flow Sensor 4 Cyl 1.8L Cardone - Reman. Mass Air Flow Sensor

P311-374D3F0    74-60001  Remanufactured

MD172449

Qty:
$36.90 120.06
Cardone Mass Air Flow Sensor
  • Remanufactured Mass Air Flow Sensor
  • Reman. Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • 100% Re-solder Of Critical Components Ensures Superior Electrical Connections, No Intermittent Failures And Longer Product Life.
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • On-car Vehicle Validation Routines Ensure That Modules Meet All Form, Fit, Durability And Performance Requirements.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE® Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1993 - Mitsubishi Expo LRV L 4 Cyl 1.8L 112 1834
Cardone
1987 Mitsubishi Galant Mass Air Flow Sensor Cardone - Reman. Mass Air Flow Sensor

P311-5CFB3E8    74-60007  Remanufactured

E5T01471 , MD118126

Qty:
$15.30 122.25
Cardone Mass Air Flow Sensor
  • Remanufactured Mass Air Flow Sensor
  • Reman. Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • 100% Re-solder Of Critical Components Ensures Superior Electrical Connections, No Intermittent Failures And Longer Product Life.
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • On-car Vehicle Validation Routines Ensure That Modules Meet All Form, Fit, Durability And Performance Requirements.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE® Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Brand: Cardone
Additional Fitment Information:
Vehicle
1987 - Mitsubishi Galant
Cardone
1999 Mitsubishi Eclipse Mass Air Flow Sensor 4 Cyl 2.0L Cardone - Reman. Mass Air Flow Sensor

P311-5D4E9CD    74-60006  Remanufactured

MD357338 , MD151055 , MD357388 , MD183618 , MD170165 , MD183609

Qty:
$32.40 168.88
Cardone Mass Air Flow Sensor
  • Remanufactured Mass Air Flow Sensor
  • Reman. Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • 100% Re-solder Of Critical Components Ensures Superior Electrical Connections, No Intermittent Failures And Longer Product Life.
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • On-car Vehicle Validation Routines Ensure That Modules Meet All Form, Fit, Durability And Performance Requirements.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE® Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Aspiration Block Engine CID CC
1999 - Mitsubishi Eclipse Turbocharged L 4 Cyl 2.0L 122 1997
Cardone
1990 Mitsubishi Eclipse Mass Air Flow Sensor 4 Cyl 2.0L Cardone - Reman. Mass Air Flow Sensor

P311-07AF290    74-60000  Remanufactured

MD125922

Qty:
$18.90 120.06
Cardone Mass Air Flow Sensor
  • Remanufactured Mass Air Flow Sensor
  • Reman. Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • 100% Re-solder Of Critical Components Ensures Superior Electrical Connections, No Intermittent Failures And Longer Product Life.
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • On-car Vehicle Validation Routines Ensure That Modules Meet All Form, Fit, Durability And Performance Requirements.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE® Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Aspiration Block Engine CID CC
1990 - Mitsubishi Eclipse Naturally Aspirated L 4 Cyl 2.0L 122 1997
Cardone
1993 Mitsubishi Eclipse Mass Air Flow Sensor 4 Cyl 2.0L Cardone - Reman. Mass Air Flow Sensor

P311-46AB950    74-60017  Remanufactured

MD125924

Qty:
$27.90 122.25
Cardone Mass Air Flow Sensor
  • Remanufactured Mass Air Flow Sensor
  • Reman. Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • 100% Re-solder Of Critical Components Ensures Superior Electrical Connections, No Intermittent Failures And Longer Product Life.
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • On-car Vehicle Validation Routines Ensure That Modules Meet All Form, Fit, Durability And Performance Requirements.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE® Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Aspiration Block Engine CID CC
1993 - Mitsubishi Eclipse Turbocharged L 4 Cyl 2.0L 122 1997
Cardone
1990 Mitsubishi Precis Mass Air Flow Sensor Cardone - Reman. Mass Air Flow Sensor

P311-5387319    74-60005  Remanufactured

9200930003 , 2816424520

Qty:
$22.50 122.25
Cardone Mass Air Flow Sensor
  • Remanufactured Mass Air Flow Sensor
  • Reman. Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • 100% Re-solder Of Critical Components Ensures Superior Electrical Connections, No Intermittent Failures And Longer Product Life.
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • On-car Vehicle Validation Routines Ensure That Modules Meet All Form, Fit, Durability And Performance Requirements.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE® Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Brand: Cardone
Additional Fitment Information:
Vehicle
1990 - Mitsubishi Precis
Cardone
2010 Mitsubishi Eclipse Mass Air Flow Sensor Cardone - Reman. Mass Air Flow Sensor

P311-22DB40B    74-50046  Remanufactured

MR985187 , 1380054G00

Qty:
$27.90 85.82
Cardone Mass Air Flow Sensor
  • Remanufactured Mass Air Flow Sensor
  • Reman. Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • 100% Re-solder Of Critical Components Ensures Superior Electrical Connections, No Intermittent Failures And Longer Product Life.
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • On-car Vehicle Validation Routines Ensure That Modules Meet All Form, Fit, Durability And Performance Requirements.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE® Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Brand: Cardone
Additional Fitment Information:
Vehicle
2010 - Mitsubishi Eclipse
Cardone
1991 Mitsubishi Galant Mass Air Flow Sensor Cardone - Reman. Mass Air Flow Sensor

P311-07AF290    74-60000  Remanufactured

MD125922

Qty:
$18.90 120.06
Cardone Mass Air Flow Sensor
  • Remanufactured Mass Air Flow Sensor
  • with 2 Wheel Steering
  • Reman. Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • 100% Re-solder Of Critical Components Ensures Superior Electrical Connections, No Intermittent Failures And Longer Product Life.
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • On-car Vehicle Validation Routines Ensure That Modules Meet All Form, Fit, Durability And Performance Requirements.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE® Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Cylinder Head Type
1991 - Mitsubishi Galant DOHC
Cardone
2001 Mitsubishi Mirage Mass Air Flow Sensor 4 Cyl 1.8L Cardone - Reman. Mass Air Flow Sensor

P311-0D6307C    74-60020  Remanufactured

MD343605

Qty:
$22.50 115.45
Cardone Mass Air Flow Sensor
  • Remanufactured Mass Air Flow Sensor
  • Reman. Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • 100% Re-solder Of Critical Components Ensures Superior Electrical Connections, No Intermittent Failures And Longer Product Life.
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • On-car Vehicle Validation Routines Ensure That Modules Meet All Form, Fit, Durability And Performance Requirements.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE® Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2001 - Mitsubishi Mirage L 4 Cyl 1.8L 112 1834
Cardone
2003 Mitsubishi Lancer Mass Air Flow Sensor Cardone - Reman. Mass Air Flow Sensor

P311-35DE79C    74-60025  Remanufactured

MR578399

Qty:
$27.90 364.66
Cardone Mass Air Flow Sensor
  • Remanufactured Mass Air Flow Sensor
  • Reman. Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • 100% Re-solder Of Critical Components Ensures Superior Electrical Connections, No Intermittent Failures And Longer Product Life.
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • On-car Vehicle Validation Routines Ensure That Modules Meet All Form, Fit, Durability And Performance Requirements.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE® Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Aspiration
2003 - Mitsubishi Lancer Turbocharged
Cardone
2002 Mitsubishi Montero Sport Mass Air Flow Sensor 6 Cyl 3.5L Cardone - Reman. Mass Air Flow Sensor

P311-4612589    74-60019  Remanufactured

MD336482

Qty:
$27.90 293.56
Cardone Mass Air Flow Sensor
  • Remanufactured Mass Air Flow Sensor
  • Reman. Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • 100% Re-solder Of Critical Components Ensures Superior Electrical Connections, No Intermittent Failures And Longer Product Life.
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • On-car Vehicle Validation Routines Ensure That Modules Meet All Form, Fit, Durability And Performance Requirements.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE® Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2002 - Mitsubishi Montero Sport V 6 Cyl 3.5L 215 3497
Cardone
1997 Mitsubishi Montero Sport Mass Air Flow Sensor 6 Cyl 3.0L Cardone - Reman. Mass Air Flow Sensor

P311-492CC69    74-60018  Remanufactured

MD334011

Qty:
$27.90 120.06
Cardone Mass Air Flow Sensor
  • Remanufactured Mass Air Flow Sensor
  • Reman. Mass Air Flow Sensor
  • Product Attributes:
    • FAQs:
      • A Malfunctioning Maf/vane Airflow Sensor Can Cause Any One Or More Of The Following Symptoms: Hesitation, Stalling, Poor Fuel Economy Or Poor Engine Performance.
      • How Can A Malfunctioning Maf/vane Airflow Sensor Affect My Vehicles’ Operation?
      • How Can I Determine If The Maf/vane Airflow Sensor Is Bad?
      • Over-voltage Sources From Relays, Shorted Wiring, Cracked Printed Circuit Boards, Moisture Entering The Unit Through Split Air Ducts, Electrical Connections And Wiring, Air Intake Obstructions Or Gas/oil Fumes From The Engine Can Cause Failure. Check Air
      • The Most Common Causes Are: Cracked Circuit Boards, Burnt Sensing Elements, Poor Solder Joints, Deteriorated Conformal Coating, Or Loose Printed Circuit Board Components.
      • The Most Common Causes Are: Worn Vane Assembly, Cracked Housing, Or Cracked Printed Circuit Board. These Conditions Require Unit Replacement.
      • Visually Inspect The Sensor Element In The Maf For Damage Or For A Burnt Smell. In The Vane Airflow Sensor, Inspect The Door For Binding Or For A Burnt Smell. Unit. Start The Engine And Tap Lightly On The Unit. If Tapping Causes An Engine Malfunction Or I
      • What Are The Most Common Causes Of Maf/vane Airflow Sensor Problems?
      • What Goes Bad In Maf Sensors?
      • What Goes Bad In Vane Airflow Type Units?
    • Features and Benefits:
      • 100% Re-solder Of Critical Components Ensures Superior Electrical Connections, No Intermittent Failures And Longer Product Life.
      • All Modules Are 100% Tested With Automated Computer Test Equipment To Ensure Full Functionality And Reliability
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit
      • Components Are Rated To Handle Demanding Temperature Variations For Optimum Reliability In Every Environment.
      • On-car Vehicle Validation Routines Ensure That Modules Meet All Form, Fit, Durability And Performance Requirements.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%
      • Our Sensors Precisely Track O.e. Output Curves And Maintain Spec Tolerances To Ensure Accurate Feedback To The Vehicle’s Engine Control Management System.
  • CARDONE® Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1997 - Mitsubishi Montero Sport V 6 Cyl 3.0L 181 2972
Spectra
2004 Mitsubishi Lancer Mass Air Flow Sensor 4 Cyl 2.0L Spectra

P311-4D341C8    MA307  New

MF21114 , 917967 , 2451143 , MD343605 , XTP460020 , 7460020 , AF10324 , MAF1210

Qty:
140.10
Spectra Mass Air Flow Sensor
  • Mass Air Flow Sensor
  • ; Sensor with Housing
  • Product Attributes:
    • California_Prop 65 Message:
      • May Cause Cancer Or Reproductive Harm
      • Y
  • Our mass air flow sensors have a programmable ceramic circuit board make of premium grade silicon coating to protect from severe under hood temperature fluctuations and road vibrations. The optimal circuit design allows faster signal response and consistancy with the use of new all platinum resistance thermometer sensors.
Brand: Spectra
Additional Fitment Information:
Vehicle Aspiration Block Engine CID CC
2004 - Mitsubishi Lancer Naturally Aspirated L 4 Cyl 2.0L - 2000
Beck Arnley
1995 Mitsubishi Eclipse Mass Air Flow Sensor 4 Cyl 2.0L Beck Arnley

P311-05416BC    158-0832  New

Qty:
211.91
Beck Arnley Mass Air Flow Sensor
  • AIR MASS SENSOR
  • ; NEW
  • Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Brand: Beck Arnley
Additional Fitment Information:
Vehicle Aspiration Block Engine CID CC
1995 - Mitsubishi Eclipse Turbocharged L 4 Cyl 2.0L 122 1997
Beck Arnley
2011 Mitsubishi Eclipse Mass Air Flow Sensor 4 Cyl 2.4L Beck Arnley

P311-5105058    158-0841  New

Qty:
99.29
Beck Arnley Mass Air Flow Sensor
  • AIR MASS SENSOR
  • ; NEW
  • Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Brand: Beck Arnley
Additional Fitment Information:
Vehicle Block Engine CID CC
2011 - Mitsubishi Eclipse L 4 Cyl 2.4L - 2378
Beck Arnley
2004 Mitsubishi Eclipse Mass Air Flow Sensor 6 Cyl 3.0L Beck Arnley

P311-52E8ED1    158-0840  New

Qty:
205.49
Beck Arnley Mass Air Flow Sensor
  • AIR MASS SENSOR
  • ; NEW
  • Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Brand: Beck Arnley
Additional Fitment Information:
Vehicle Block Engine CID CC
2004 - Mitsubishi Eclipse V 6 Cyl 3.0L 181 2972

Latest Car Advice

CarJunky AutoAdvice

question

Showing 3 out of 14 Posts | Show 11 Hidden Posts
Question From tes on question

Hi there 2000 Mitsubishi the engine stall when the car stops at the traffic light don't know the cause, need your advice.

Response From Discretesignals

Model and engine size? Automatic or manual?

Check engine light on?

Response From tes Top Rated Answer

Hi there thank you, yes there is a code p0113 intake air temperature high, is this the mass air flow sensor. and it is automatic trani engine is 2.7

mary-x-mass and thank you for the help.

Response From Discretesignals

2.7L? Mits doesn't offer that size engine in their line up for that year on any of their models in the USA. Still need to know what model yours is.

Response From tes

Hi there happy holidays, sorry for mess the car is 4 cylinder and it is 2.0 engine.

Response From nickwarner

OBD-II Trouble Code Technical Description
Intake Air Temperature Circuit High Input

What does that mean?
The powertrain control module (PCM) monitors the temperature of the air entering the engine. The PCM supplies a 5 voltreference voltage to the Intake Air Temperature (IAT) sensor. The IAT is a thermistor that varies resistance based on temperature. As the temperature increases, resistance decreases. Low temperature results in a high signal voltage. When the PCM sees a signal voltage higher than 5 volts, it sets this P0113 check engine light code.

Potential Symptoms
There will likely be no symptoms other than illumination of the Malfunction Indicator Lamp (MIL - Check Engine Light / Service Engine Soon).

Causes
A code P0113 may mean that one or more of the following has happened:

Internally failed IAT sensor
Faulty connection at IAT sensor
Open in IAT ground circuit or signal circuit
Short to voltage in IAT signal circuit or reference circuit
IAT harness and/or wiring routed too close to high-voltage wiring (e.g. alternator, spark plug cables, etc.)
Faulty PCM (less likely but not impossible)
Possible Solutions
First, if you have access to a scan tool, is there an IAT reading? If the IAT reading is logical then the problem is likely intermittent. If the reading is less than -30 degrees, unplug the connector. Install a jumper wire between the harness connector signal and ground circuits. The IAT temperature reading on the scan tool should be maxed out at the high end. For example it should be 280 degrees Farenheit or higher. If it is, the wiring is okay, and it may have been the connection. If it isn't install the jumper wire between the IAT signal circuit and the chassis ground.

If now the IAT reading on the scan tool is maxed out then check for an open in the IAT ground circuit. If you get no reading at all on the scan tool, it's likely that the sensor signal is open or the 5 volt reference is missing. Check using a DVOM (digital volt ohm meter) for a 5 volt reference. If it's there, then unplug the connector at the PCM and check for continuity on the IAT signal circuit between the PCM connector and the IAT connector.

Response From tes

thank you for the help, do you know the location of that sensor, perhaps how it looks like too, can you send me the picture of the sensor. thank you again.

Response From Hammer Time

I guess you just don't want to tell anybody what model your car is?

Response From tes

Hi there sorry I will do my best to communicate about cars in the wright way. here is the car's information
year 2001
Mitisubushi
eclipes GS
4 clynder
2.0 engine

Response From Hammer Time

According to my database, the 2.0 wasn't available in the 01 GS. I also see that the year changed half way through. Got some more accurate info?

Response From nickwarner

Look on the sticker in the driver's door jamb. There should be a build sticker. Post the build date and the 8th and 10th digits of the VIN please.

Response From tes

Hi there thank you for all the help, and sorry for miss information, the car is 2004 Mitsubishi out lander 2.4 engine, the code is p0113 is this different than mass air flow sensor,

Response From Hammer Time

Unbelievable. Now we went from a car to a truck. That code is for a problem with the intake air temp circuit. That is a very different circuit from the MAF but in this case that sensor is built into the MAF although having the code doesn't automatically mean a bad sensor.

Response From tes

thank you very much after we clean the MAF with air flow sensor cleaner, the car is ok.

92 mighty max no power

Showing 7 out of 7 Posts
Question From mightymax on 92 mighty max no power

I have a 1992 mitsubishi pickup called a mighty max. It's 2wd with a 2.4L in it. Ive replaced the spark plugs fuel regulator and the mass air flow sensor on the vehicle. Before i replaced those two parts the truck would run for 5 min then die. When i would check the spark plugs the plugs would be soaked with gas. After changing these parts the truck will sit and idle but after moving the truck about 10 ft the truck looses power and dies. What do i need to do. the truck has 130,000,miles on it.

Response From steve01832

When the truck dies, will it immediately restart or will it crank over and not start?

Steve

Response From mightymax

it wont start

Response From Loren Champlain Sr

Pull the plugs again and dry them out. When you try to start it again, hold the throttle to the floor. This will enable a 'clear flood'. If the engine starts, back out of the throttle so you don't over-rev the engine. There are a multiude of things that could be going on, here, but I'm assuming that the engine is just flooding. Spark, cam timing, ect. are okay?

Response From mightymax

do any of you guys have a chart or a diagram as to where some of these things may be. Im not all that engine savy.

Response From steve01832 Top Rated Answer

If it won't start, let's install a fuel pressure guage into the fuel rail, install a noid light into one of the injector pigtails, and a spark tester on one of the coil wires. If you have a vacuum guage, tee into the pcv hose. Crank engine and observe all test equipment. Please record fuel pressure and crank vacuum readings and post back here. Also tell us if there is or isn't spark and whether or not it has injector pulse.

Steve

Response From Loren Champlain Sr

mightymax; Sounds as if it is overfueling. Check the CTS (coolant temp sensor) and the connection. We can supply a chart for you, if needed, to check resistance at varying temps. I went ahead and attached the chart.