A Whining Pump Is Usually Caused By Air In The System. Remove Reservoir Lid And Inspect Fluid Level And Condition. If Fluid Has Foam Or Air Bubbles Present, You Must Bleed The System Again. Some Systems Are Very Difficult To Bleed Manually And May Require
I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
The End Of The Original Pump's Input Shaft Enlarged Causing The Pulley Hole To Increase During Removal. The Pulley Must Be Replaced.
The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
Why Is The Pump Making A Whining Noise All Of The Time?
Features and Benefits:
Designed To Extend The Life Of The Steering System
In-line Filter With Serviceable Filter Element
Patented Built-in Bypass That Filters Up To 190 Micron Particles
Sure-grip Barb Connections Are Included To Ensure Proper Hose Fitment
CARDONE MagnaPure Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8", 1/2", and 5/8" sizes to cover a most vehicle applications.