Shop for Discount Auto Parts, Replacement and Performance Parts and Accessories

1970 Plymouth Superbird Engine Intake Manifold 8 Cyl 7.2L Edelbrock - Performer Series RPM Intake Manifold

Part # P311-04E065A Manu # 7193 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $427.97

Satin Finish; 4 bbl Carb; Non-EGR; 1500-6500rpm;CARB E.O. D-161-54 Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
MANIFOLD; 1959-79 CHRYS 440 (RB); PERFOMER RPM
Performer Series RPM Intake Manifold
Product Attributes:
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Mopar 413-440
- Number of Carbs: One
- RPM Range: 1500-6500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Best for the Ultimate in Street High-Performance
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 Deg. Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
- Edelbrock Total Power Package Maximizes Gains
- Cast Finish
Edelbrock part #7193 Performer RPM 440 intake manifold is designed for 413-426-440 c.i.d. Chrysler V8 applications. The dual-plane design results in excellent low-rpm torque and outstanding high-rpm hp. For high-performance'street/strip applications.

Brand: Edelbrock

Vehicle	Block	Engine	CID	CC
1970 - Plymouth Superbird	V	8 Cyl 7.2L	440	7211

1970 Plymouth Superbird Engine Intake Manifold 8 Cyl 7.2L Edelbrock - Dual-Quad Intake Manifold

Part # P311-1C62A25 Manu # 2475 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $640.44

2500-6500 rpm; CH-6B Chrysler 6-Pack; Non-EGR; For 3x2 bbl Carbs;Not Legal For Sale Or Use In California Replacement For Chrysler 6-Pack PN[04529056]~Recommend Edelbrock Gasket PN[7225] for Manifold Gasket~Stock Replacement Part
MANIFOLD; 1959-79 CHRY 361-440 (RB); CH-6B; SIX-PACK
Dual-Quad Intake Manifold
Product Attributes:
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Mopar 413-440
- Number of Carbs: Three
- RPM Range: 2500-6500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Famous 6-Pack Intake
- OEM For Factory Six-Pack Engines
- Designed for 2500 to 6500 RPM Performance
- Manifold Has Balanced 180+ Firing Order
- Smooth and Consistent Part-Throttle Power
- Offers Excellent Performance Potential
- Match with Other Dual-Quad Items for Total Package
- Stock Replacement Part
Edelbrock part #2475 CH-6B Chrysler 6-pack intake manifold is designed for 440 c.i.d. Chrysler engines with 3x2-bbl. carbs, also fits 413 and 426 Wedge. #2475 is stock replacement/street legal part for 440 V8's with OEM 3x2-bbl. carbs; 1968-71. This manifold was original equipment on Chrysler 440 Six-Pack engines, Chrysler #P4529056. Will not fit 1962-64 Max Wedge heads. The Edelbrock CH-6B Chrysler 6-pack intake manifold is machined for the OEM 3x2-bbl 4-bolt carburetors.

Brand: Edelbrock

Vehicle	Block	Engine	CID	CC
1970 - Plymouth Superbird	V	8 Cyl 7.2L	440	7211

1970 Plymouth Superbird Engine Intake Manifold 8 Cyl 7.2L Edelbrock - Performer 440 Intake Manifold

Part # P311-35FFE67 Manu # 2191 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $407.64

EGR/Non-EGR; Idle-5500 rpm; For 4 bbl Carbs;Not Legal For Sale Or Use In California Recommend Edelbrock Gasket PN[7225] for Manifold Gasket~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
MANIFOLD; 1959-79 CHRY 383/440; PERFORMER EGR; NON-EGR
Performer 440 Intake Manifold
Product Attributes:
- Cylinder Head Type: Standard
- Emission:
  - With Egr
  - Without Egr
- Engine Make/Size: Mopar 413-440
- Number of Carbs: One
- RPM Range: Idle -5500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock part #2191 Performer 440 intake manifold is designed for street 413-426-440 c.i.d. Chrysler V8's that measure 8.75" across block. Will not fit 1962-64 Max Wedge heads. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

Brand: Edelbrock

Vehicle	Block	Engine	CID	CC
1970 - Plymouth Superbird	V	8 Cyl 7.2L	440	7211

1970 Plymouth Superbird Engine Intake Manifold 8 Cyl 7.2L Edelbrock - CH-28 Dual-Quad Intake Manifold

Part # P311-25A7149 Manu # 5440 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $574.54

1500-6000 rpm; Non-EGR;CARB E.O. D-161-54 Use Edelbrock Camshaft Kit PN[2192] For Low-Torque Needs~Use Edelbrock Camshaft Kit PN[5092] For Top-End Power~Recommend Edelbrock Gasket PN[7225] for Manifold Gasket~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
MANIFOLD; 1959-79 CHRYS 440; DUAL-QUAD; CH-28; VINTAGE SERIES
CH-28 Dual-Quad Intake Manifold
Product Attributes:
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Mopar 413-440
- Number of Carbs: Two
- RPM Range: 1500-6000
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Designed for 1500 to 6000 RPM Performance
- Manifold Has Balanced 180+ Firing Order
- Smooth and Consistent Part-Throttle Power
- Offers Excellent Performance Potential
- Carburetor Center-To-Center Dimensions 6.4375 in.
- Match with Other Dual-Quad Items for Total Package
- Engine Swaps
Edelbrock part #5440 Chrysler CH-28 Dual-Quad intake manifold is designed for 413-426-440 c.i.d. Chrysler V8's. Use with Performer-Plus cam #2192 for low-end torque or Performer RPM cam #7194 for top-end power. Will not fit 1962-64 Max Wedge heads. Carb center to carb center: 6-7/16". Manifold measures 8.75" across block.

Brand: Edelbrock

Vehicle	Block	Engine	CID	CC
1970 - Plymouth Superbird	V	8 Cyl 7.2L	440	7211

Engine Intake Manifold Holley

Part # P311-274291F Manu # 300-269 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $470.25

EFI Intake Manifold
EFI Intake Manifold; Single Plane; Fits w/Gen III LS Engines w/LS7 Cylinder Heads; 4150 Flange; Incl Fuel Rails/Hardware/Gaskets; Cast Aluminum; Silver;
Product Attributes:
- Cylinder Head Type: Ls7
- Engine Make/Size: Gen. Iii Ls1/ls2/ls6
- Usage: Racing
- WARNING CA Proposition 65: No
Features:
- 4150 Square Bore Flange
- Cast Aluminum Construction
Single Plane EFI LS Intake Manifold. Fits all GM LS Gen III engines equipped with LS7 cylinder heads. Designed with a 4150 Square bore flange. Optimized runner layout and constant cross sectional area - broad torque curve, best vehicle performance from 2500-7000 RPM Minimum carb flange height - fit in vehicles with minimum hood modifications. Cast aluminum construction - great manifold for centrifugal blower, turbocharged or NOS power adder applications The manifold kit includes the fuel rails, mounting hardware, and o-ring cylinder head mounting flange gaskets.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-0366011 Manu # 29087 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $455.31

Victor Jr. Series Intake Manifold
MANIFOLD; GM LS1; VICTOR JR; CARBURETED; 4150 FLANGE
Product Attributes:
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block Ls1
- Number of Carbs: One
- RPM Range: 3500-7500
- Usage: Racing
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Converts LS1 Engine to Square Bore Carburetor
- Power Increase From 100-500+ HP
- Use OEM Factory O-Rings for Intake Gasket
Edelbrock part #29087 Victor Jr. LS1 intake manifold is a high-rise single-plane intake capable of supporting up to 600 hp. The Victor Jr. LS1 features a flange that accepts a square-bore carburetors. It can be used on LS2 applications when matched with MSD's #6012 LS2 ignition controller (available through MSD Performance). Includes a throttle bracket designed to work with 700R-4, 200R-4 and Turbo 350 transmissions. Most applications will require hood modification.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-0199EAF Manu # 7158 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $628.86

Performer RPM Intake Manifold
MANIFOLD; 1958-65 CHEV 348-409; SMALL PORT; PERFORMER RPM
Product Attributes:
- Cylinder Head Type: Oval Port- Large
- Emission: Without Egr
- Engine Make/Size: Chevy 348-409
- Number of Carbs: One
- RPM Range: 1500-6500
- Usage: Racing
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Designed for 1500 to 6500 RPM Performance
- Bright Silver Chrome Finish That Will Not Discolor
- For Large Port Or RPM W-Series Heads
Edelbrock part #7158 Performer RPM small port intake manifold is designed to fit 1958-1965 Chevrolet 348/409 "W" big-block engines. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. For square-bore carburetors only.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Holley

Part # P311-19192B3 Manu # 300-256 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $638.66

Race Intake Manifold
Race Intake Manifold; Single Plane; Split-Design; 4150 Square Bore Flange; 7.32in. Front/Rear Height; 2500-7000 RPM Band; Includes Shoulder Bolt Locators/O-Ring Seals; Satin Finish;
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: N/a
- Engine Make/Size: Gm Ls1/ls2/ls6
- Flange Type: 4150 Square Bore
- Front Height: 7.320 In.
- Fuel System Type: Carb
- Manifold Type: Single Plane
- Number of Carbs: One
- Rear Height: 7.320 In.
- RPM Range: 2500-7000
- Usage: Racing
- WARNING CA Proposition 65: No
Features:
- Maximum Performance Race Design w/Hood Clearance Consideration
- Lighter Than Other Split Race Intakes
- Split Feature Making Porting Efforts Easy
- 1/3 to 1/2 The Price Of Other Split Race Intakes
- Captured O-Ring Seals At Head Ports and Split
- Vacuum Port Options Includes (2) 1/8
- (1) 1/4
- (1) 3/8 NPT Ports
- A-B Height - 7.32 in. (0 Deg carb flange angle)
- Port Size 3.28 in. Height x 1.10 in. Wide
- Carb Flange - Std 4150 For Up To 1-3/4 in. Diameter Throttle Bores
- As-Cast Runner Area - 3.5 in. Square at Runner Entry
- As-Cast Runner Area - Tapered To 2.9 in. Square at Flange Exit
The new Holley Single-Plane Race intake manifold were designed with performance in mind. They feature a race bred, two piece split feature that was previously only found on the most expensive race intakes. The manifold will fit GM LS Gen III engines with cathedral port heads and are intended for 4150 style square bore flanged carburetors or throttle body EFI.The LS Race single-plane intake manifold was designed for hi-performance/racing engine applications, 5.3 to 6.2+ liter displacement, and maximum engine speeds of 6000-7000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the RPM spectrum while providing maximum performance up to 7000 rpm.The Holley LS Race manifold incorporates a split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap. With shoulder bolt locators and O-ring seal, reassembly is simple and precise. Technical Data‚· A-B Height - 7.32 in. (0° carb flange angle)ï‚· Port Size- 3.28 in. Height x 1.10 in. Wide‚· Carburetor Flange - Standard 4150 for up to 1-3/4 in. diameter throttle boresï‚· As-Cast Runner Cross-Sectional Area - 3.5 inÂ² at the runner entry tapered to 2.9 inÂ² at the flange exit

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-1657041 Manu # 28097 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $661.77

Super Victor LS1 Intake Manifold
MANIFOLD; GM LS1/LS2; SUPER VICTOR; 4BBL CARB
Product Attributes:
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block Ls1
- Number of Carbs: One
- RPM Range: 3500-8000
- Usage: Racing
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Offers Greater Air Flow Potential
- Bigger Power Gains
- Accepted By NASCAR For Grand National Series
- For Use With Carburetor
Edelbrock part #28097 Super Victor LS1 intake manifold offers greater air flow potential for even bigger power gains, this manifold has been accepted by NASCAR for use in the Grand National West/Grand National East series. The carb mount pad is 1.12" taller than the Victor Jr. LS1, and the port exits have been increased to 1.08" x 2.74". Edelbrock offers the optional LS1 Timing Control Module #91238 to drive the stock LS1 Coil-on-Plug ignition system. LS2 applications require MSD's #6012 LS2 ignition controller (available through MSD Performance).

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-58612EF Manu # 29025 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $597.35

Victor Jr. Series Intake Manifold
MANIFOLD; GM 454-R; VICTOR JR; EFI; RECTANGLE PORT
Product Attributes:
- Cylinder Head Type: Oval Port- Large
- Emission: Without Egr
- Engine Make/Size: Chevy Big Block (396-502)
- Number of Carbs: None; For Fuel Injection
- RPM Range: 3500-7500
- Usage: Racing
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Race-Winning Design For All Types Of Competition
- Single-Plane Maximizes Torque And Horsepower
- Runners Feature Extra Material for Custom Porting
- For Performance in 3500 to 7500 RPM Range
- Ideal for 502 cid and Smaller Competition Engines
Edelbrock part #29025 Victor Jr. 454-R EFI intake manifold is designed for competition 396-502 big-block Chevy engines with rectangular-port cylinder heads. It features extended runner dividers, smaller plenum chambers and unique runner design for better 60 foot times and max power from 3500 to 7500 rpm. These intake manifolds are especially suited to 502 c.i.d. and smaller competition engines. The Edelbrock Victor Jr. 454-R EFI intake manifold will fit Edelbrock Victor race cylinder heads #77609 and Victor 24 degree #77409, #77459, #77429, #77479 and #77489.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-2E71029 Manu # 7524 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $733.30

Dual-Quad Intake Manifold
MANIFOLD; 1964-71 GEN II HEMI; DUAL-QUAD; PERFORMER RPM
Product Attributes:
- Cylinder Head Type: Standard
- Emission: N/a
- Engine Make/Size: Mopar 426-572 Hemi
- Number of Carbs: Two
- RPM Range: 2500-6500
- Usage: Racing
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Single-Plane Air-Gap Design
- Dual 4150 Style Carb Pads
- Compatible With Factory Cylinder Heads
Edelbrock part #7524 Dual-Quad HEMI intake manifold is intended for use with Mopar Gen II (1964-71) 426-572 HEMI engines operating in the 2,500 to 6,500+ range. This new intake manifold is a single-plane Air-Gap design with a dual square-bore 4150 style carburetor pad. Carburetor spacing and height are the same as Mopar Performance dual-quad #P5153737, making it a direct bolt-on to all vehicles with a shaker hood. They also retain the same carburetor linkage location from the factory. The Dual-Quad HEMI is compatible with factory style cylinder heads, but optimized for use with Edelbrock Victor Jr. HEMI cylinder heads. Requires Edelbrock Coil Bracket #8079 for use with OE style coils.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Holley

Part # P311-16CEB10 Manu # 300-256BK Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $674.00

Race Intake Manifold
Race Intake Manifold; Single Plane; Split-Design; 4150 Square Bore Flange; 7.32in. Front/Rear Height; 2500-7000 RPM Band; Includes Shoulder Bolt Locators/O-Ring Seals; Black;
Product Attributes:
- Cylinder Head Type: Standard
- Emission: N/a
- Engine Make/Size: Gm Ls1/ls2/ls6
- Number of Carbs: One
- RPM Range: 2500-7000
- Usage: Racing
- WARNING CA Proposition 65: No
Features:
- Maximum Performance Race Design w/Hood Clearance Consideration
- Lighter Than Other Split Race Intakes
- Split Feature Making Porting Efforts Easy
- 1/3 to 1/2 The Price Of Other Split Race Intakes
- Captured O-Ring Seals At Head Ports and Split
- Vacuum Port Options Includes (2) 1/8
- (1) 1/4
- (1) 3/8 NPT Ports
- A-B Height - 7.32 in. (0 Deg carb flange angle)
- Port Size 3.28 in. Height x 1.10 in. Wide
- Carb Flange - Std 4150 For Up To 1-3/4 in. Diameter Throttle Bores
- As-Cast Runner Area - 3.5 in. Square at Runner Entry
- As-Cast Runner Area - Tapered To 2.9 in. Square at Flange Exit
The new Holley Single-Plane Race intake manifold were designed with performance in mind. They feature a race bred, two piece split feature that was previously only found on the most expensive race intakes. The manifold will fit GM LS Gen III engines with cathedral port heads and are intended for 4150 style square bore flanged carburetors or throttle body EFI.The LS Race single-plane intake manifold was designed for hi-performance/racing engine applications, 5.3 to 6.2+ liter displacement, and maximum engine speeds of 6000-7000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the RPM spectrum while providing maximum performance up to 7000 rpm.The Holley LS Race manifold incorporates a split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap. With shoulder bolt locators and O-ring seal, reassembly is simple and precise. Technical Data‚· A-B Height - 7.32 in. (0° carb flange angle)ï‚· Port Size- 3.28 in. Height x 1.10 in. Wide‚· Carburetor Flange - Standard 4150 for up to 1-3/4 in. diameter throttle boresï‚· As-Cast Runner Cross-Sectional Area - 3.5 inÂ² at the runner entry tapered to 2.9 inÂ² at the flange exit

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Holley

Part # P311-319A1E5 Manu # 822241 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,295.00

EFI Intake Manifold
EFI Intake Manifold; Upper; Fits w/LS3/L92 Engines; EV1 Injectors Only; Dual Plenum; 102mm; 12.75 in. Runners; Includes Fuel Rail Kit; Fabricated; Silver;
Product Attributes:
- Cylinder Head Type: Ls3/l92
- Engine Make/Size: Chevy Ls3/l92
- Usage: Racing
- WARNING CA Proposition 65: No
Features:
- Silver Finish Creates High Impact Under-Hood Styling
- 3mm (1/8) Thick T6061 Sheet Aluminum Construction For Maximum Durability
- Twin 102mm Throttle Bore Openings For Increased Air Flow
- 100% Tig Welded For Strength And Durability
- Includes 3/8 Fuel Rail Kits (Sniper Logo Laser Engraved)
- Intake Runners With Tapered Top Is Designed To Increase Air Velocity
- More Evenly Distribute Airflow To All 8 Cylinders Improving Performance And Throttle Response
- Dual Plenum Design Ideal For Street Max Effort Engines And Boosted Applications
- Long Intake Runner Lengths (12.75 Inches) Offering Low End Torque And Operating Range Of 1600-6800 Rpm
- Product Includes All Gaskets And Hardware For A Hassle-Free Installation
- The Sniper Intake Will Only Accept Ev1 Style Injectors.
Holley continues to push the envelope of intake design with its latest offering. The unique look of this intake will surely stand out from the crowd! Our latest release of fabricated Dual Plenum intake manifolds for GM LS1/2/6 and LS3/L92 engines. This unique design of utilizing two plenums solves two common problems experienced with many intakes increased airflow and even dispersion of air to intake ports. The use of one tapered plenum to accommodate one bank of cylinders accomplishes both problems. The entire volume of incoming air is distributed to only four cylinders and the tapered shape of the plenum help increased air velocity directed to each of the intake runner ports. Our dual plenum design features extremely long 12-3/4 in. runners to develop low-end torque making this intake an ideal street intake. These intake are finished in our familiar silver and black anodized finishes for durability and good looks. Our 3/8 in. fuel rail kit include a laser engrave Sniper logo and are capable of supporting 750+ horsepower.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Holley

Part # P311-53FD3EE Manu # 300-291 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $638.42

Race Intake Manifold
Race Intake Manifold; Fits w/GM LS III/IV engines w/LS3/L92 Heads; 7.25 in. Front H; 7.25 Rear H; Split Single Plane; Satin Finish; Silver; Cast Construction;
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Ls3/l92
- Engine Make/Size: Gm Ls3/l92
- Front Height: 7.250 In.
- Fuel System Type: Carb
- Manifold Type: Single Plane
- Rear Height: 7.250 In.
- RPM Range: 2500-7000
- Usage: Racing
- WARNING CA Proposition 65: No
Features:
- Maximum Performance Race Design With Hood Clearance Consideration
- Lighter Than Other Split Race Intakes
- Split Feature Making Porting Efforts Easy
- 33 To 50 Percent The Price Of Other Split Race Intakes
- Captured O Ring Seals At Head Ports And Split
- Black Finish
The new Holley Single-Plane Race intake manifold were designed with performance in mind. They feature a race bred, two piece split feature that was previously only found on the most expensive race intakes. The manifold will fit GM LS Gen III engines with LS3/L92 heads and are intended for 4150 style square bore flanged carburetors or throttle body EFI.The LS Race single-plane intake manifold was designed for hi-performance/racing engine applications, 5.3 to 6.2+ liter displacement, and maximum engine speeds of 6000-7000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the RPM spectrum while providing maximum performance up to 7000 rpm.The Holley LS Race manifold incorporates a split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap. With shoulder bolt locators and O-ring seal, reassembly is simple and precise. Technical Data‚· A-B Height - 7.25 in. (0° carb flange angle)ï‚· Port Size- 2.59 in. Height x 1.28 in. Wide‚· Carburetor Flange - Standard 4150 for up to 1-3/4 in. diameter throttle boresï‚· As-Cast Runner Cross-Sectional Area - 4.5 inÂ² at the runner entry tapered to 3.2 inÂ² at the flange exit

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Holley

Part # P311-1B93019 Manu # 822102-1 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $781.29

Sniper EFI Intake Manifold
Sniper EFI Intake Manifold; Low Profile; Fits w/GM LS3/L92; 92 mm. Throttle Bore; T6061 Aluminum; Black; RPM Power Band 2500-7000; Includes 3/8 in. Fuel Rail/Gaskets/Hardware;
Product Attributes:
- Cylinder Head Type: Ls3/l92
- Emission: N/a
- Engine Make/Size: Gm Ls3/l92
- RPM Range: 2500-7000
- Usage: Racing
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Black Finish Creates Stealthy Under-Hood Styling
- 92Mm Throttle Bore Opening For Increased Air Flow
- 100 Percent TIG Welded For Strength And Durability
- Includes 3/8 Inches Fuel Rail Kits Sniper W/Logo Laser Engraved
- Product Includes All Gaskets And Hardware For A Hassle-free Installation
Holley Sniper Fabricated Manifolds continues to push the aftermarket by introducing Low Profile intakes for GM LS Engines. These Intakes are a good looking, perform well, and offer an extremely good value for a performance sheet metal style intake manifold for the very popular GM LS engine family. Each manifold is ready to bolt on out of the box and are designed to accept our Sniper high-flow throttle bodies and include high flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured and welded for a perfect fit and maximum structural integrity. Choice of Throttle Body opening sizes of 92mm & 102mm are available

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-508F9EC Manu # 28875 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $809.46

Super Victor Intake Manifold
MANIFOLD; GM LS7; SUPER VICTOR; EFI; 4150 FLANGE
Product Attributes:
- Cylinder Head Type: Ls7
- Emission: Without Egr
- Engine Make/Size: Chevy Ls7
- Number of Carbs: None; For Fuel Injection
- RPM Range: 3500-8000
- Usage: Racing
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For 3500 to 7500 RPM High-Performance Engines
- Ideal For Drag Racing Or Marine Applications
- Use For Any Application Requiring Maximum Power
Edelbrock part #28875 Super Victor LS7 intake manifold is designed for Gen IV LS engines equipped with LS7 cylinder heads or Edelbrock Pro-Port Victor Jr. cylinder heads. This manifold is .75" taller than our LS3 Super Victor intakes. The new Super Victor intake manifold is capable of airflow demands of 750+ hp on naturally aspirated engines. This manifold includes machined fuel injector bosses. A carburetor mounted style throttle bracket is recommended.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-14D8634 Manu # 28978 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $845.95

Super Victor 2 Intake Manifold
MANIFOLD; BBC TALL DECK SUPER VICTOR II FOR BRODIX SR20 HEADS
Product Attributes:
- Cylinder Head Type: Rectangular Port
- Emission: Without Egr
- Engine Make/Size: Chevy Big Block (396-502)
- Number of Carbs: One
- RPM Range: 3500-8500
- Usage: Racing
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For 3500 to 8500 RPM High-Performance Engines
- Extended Constant Cross-Section of Runners
- Excellent For Large Displacement Drag Racing Eng.
Edelbrock part #28978 Super Victor II intake manifold is designed for use with large cubic inch big-block Chevy Tall-Deck engines using the latest design conventional rectangular port heads. This single-plane intake manifold is ideal for any 1,000+ horsepower drag race engine with high air flow requirements. The Super Victor II intake manifold is machined for use on tall-deck (10.2") blocks with Brodix SR20 cylinder heads with no modifications out of the box. Accepts standard height distributors. All manifolds have an extra large carburetor outer flange with a 5" x 5" opening to fit high flow carburetors and throttle stops.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-219F702 Manu # 29085 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $543.39

Victor Jr. Series Intake Manifold
MANIFOLD; GM LS1; VICTOR JR; EFI; 4150 FLANGE
Product Attributes:
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block Ls1
- Number of Carbs: One
- RPM Range: 3500-7500
- Usage: Racing
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- EFI Manifold Only
- Throttle Brkt Included for 700R-4/200R-4/Turbo 350
- Use OEM Factory O-Rings for Intake Gasket
Edelbrock part #29085 Victor Jr. LS1 EFI intake manifold accepts a standard square bore throttle body. This compact single-plane intake is capable of supporting up to 650 hp. The Edelbrock Victor Jr. LS1 EFI intake manifold continues the Edelbrock tradition of enhanced engine breathing and balanced cylinder-to-cylinder air/fuel distribution for improved performance. Includes a throttle bracket designed to work with 700-R4, 200-4R and Turbo 350 transmissions. Most applications will require hood modification.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-061DF34 Manu # 7116 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $416.14

Performer RPM Vortec Intake Manifold
MANIFOLD; 1996-02 SB CHEVY VORTEC PERFORMER RPM
Product Attributes:
- Cylinder Head Type: Gm Vortec/edelbrock E-tec
- Emission: With Egr
- Engine Make/Size: Chevy Small Block (262-400)
- Number of Carbs: One
- RPM Range: 1500-6500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Best for the Ultimate in Street High-Performance
- Bright Silver Chrome Finish That Will Not Discolor
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
- For 1996+ GM Vortec or Edelbrock E-Tech Heads
- Accepts Square Bore Carburetors Only
Edelbrock part #7116 Performer RPM Vortec intake manifold is Based on the powerful Edelbrock #7101, this single four-barrel intake is designed for the street rod, marine and engine swap market utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. Manifold accepts square-bore carbs only. For street and marine engines operating from 1500-6500 RPM, see the Performer Vortec manifold or Performer Vortec EPS. Will not fit under stock Corvette hood.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-03558A4 Manu # 29275 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $655.90

Super Victor Series Intake Manifold
MANIFOLD; GM BBC RECTANGLE PORT; SUPER VICTOR; EFI
Product Attributes:
- Cylinder Head Type: Rectangular Port
- Emission: Without Egr
- Engine Make/Size: Chevy Big Block (396-502)
- Number of Carbs: None; For Fuel Injection
- RPM Range: 3500-8500
- Usage: Racing
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Up To 8000 RPM High-Performance Engines
- Ideal For 500+ cid Engines
- Ideal For Big Block Drag Eng. w/High Flow Req.
Edelbrock part #29275 Super Victor BBC EFI intake manifold is designed for Chevy big-blocks with rectangular port cylinder heads. It features a single-plane design that is ideal for 500+ cubic-inches or any big-block drag race engine with high air flow requirements. In dyno testing, Super Victor #29275 EFI outperformed the competition out-of-the-box with just a port match and minor blending of critical surfaces.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Finish Selecting Your Vehicle to Shop For Your Intake Manifold

Shop By Brand

Shop By Related Engine Intake Manifold Parts

Shop for Top Selling Genuine Plymouth Superbird Intake Manifolds

Shop Plymouth Superbird Intake Manifolds

Finish Selecting Your Vehicle to Shop For Your Intake Manifold

Shop By Brand

Shop By Related Engine Intake Manifold Parts

Shop for Top Selling Genuine Plymouth Superbird Intake Manifolds