Shop for Discount Auto Parts, Replacement and Performance Parts and Accessories

1973 Plymouth Fury I Engine Intake Manifold 8 Cyl 5.9L Edelbrock - RPM Air-Gap Intake Manifold

Part # P311-470C321 Manu # 7576 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $536.16

Cast Finish; 4 bbl Carb; Non-EGR; 1500-6500rpm; Accepts Early-Style Waterneck Only;CARB E.O. D-161-54 Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
MANIFOLD; 1967-91 CHRYS 318-360; RPM AIR-GAP
RPM Air-Gap Intake Manifold
Product Attributes:
- Cylinder Head Type: Mopar 340/360
- Emission: Without Egr
- Engine Make/Size: Mopar 318-360
- Number of Carbs: One
- RPM Range: 1500-6500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Causes Cool and Dense Mixture More Power
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake
- Accepts Early-Style Water Neck
Edelbrock part #7576 RPM Air-Gap intake manifold is designed for 340-360 c.i.d. Chrysler V8's and 318 c.i.d. engines with 340-360 cylinder heads. This RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition intakes for years. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Accepts 1975 and earlier waterneck only. No provision for exhaust heated chokes and no exhaust crossover. Will not accept stock Thermo-Quad carburetor. Will not fit 1992 and later Magnum engines. Includes nitrous bosses.

Brand: Edelbrock

Vehicle	Submodel	Block	Engine	CID	CC
1973 - Plymouth Fury I	Base	V	8 Cyl 5.9L	360	-

1972 Plymouth Fury I Engine Intake Manifold - Lower 8 Cyl 5.9L Weiand - Action +Plus Intake Manifold

Part # P311-3DC90FB Manu # 8007WND Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $511.89

Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing~Rotary A/C Compressor Will Not Clear On 1978 And Later Applications~Square Bore Carburetors May Require PN[9006] To Seal Properly
Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
Action +Plus Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chrysler Small Block V8
- Front Height: 4.880 In.
- Fuel System Type: Carb
- Manifold Type: High Rise
- Number of Carbs: One
- Rear Height: 5.940 In.
- RPM Range: Idle-6000
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- Height Front 4.88 in.
- Rear 5.94 in.
- Port Size 1.96 in. Height x 1.00 in. Width
- High Rise/Dual Plane Design For Maximum Torque
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking/Consistent Casting
- Dyno Proven To Make 25hp Over Competition
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.

Brand: Weiand

Position: Lower

Vehicle	Position	Block	Engine	CID	CC
1972 - Plymouth Fury I	Lower	V	8 Cyl 5.9L	360	-

1972 Plymouth Fury I Engine Intake Manifold - Lower 8 Cyl 5.9L Weiand - Action +Plus Intake Manifold

Part # P311-3DC90FB Manu # 8007WND Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $511.89

Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Square Bore Carburetors May Require PN[9006] To Seal Properly~Rotary A/C Compressor Will Not Clear On 1978 And Later Applications~Legal Only For Off-Highway Use Or Racing
Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
Action +Plus Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chrysler Small Block V8
- Front Height: 4.880 In.
- Fuel System Type: Carb
- Manifold Type: High Rise
- Number of Carbs: One
- Rear Height: 5.940 In.
- RPM Range: Idle-6000
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- Height Front 4.88 in.
- Rear 5.94 in.
- Port Size 1.96 in. Height x 1.00 in. Width
- High Rise/Dual Plane Design For Maximum Torque
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking/Consistent Casting
- Dyno Proven To Make 25hp Over Competition
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.

Brand: Weiand

Position: Lower

Vehicle	Position	Block	Engine	CID	CC
1972 - Plymouth Fury I	Lower	V	8 Cyl 5.9L	360	-

1968 Plymouth Fury I Engine Intake Manifold 8 Cyl 7.2L Edelbrock - Performer Series RPM Intake Manifold

Part # P311-04E065A Manu # 7193 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $427.97

Satin Finish; 4 bbl Carb; Non-EGR; 1500-6500rpm;CARB E.O. D-161-54 Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
MANIFOLD; 1959-79 CHRYS 440 (RB); PERFOMER RPM
Performer Series RPM Intake Manifold
Product Attributes:
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Mopar 413-440
- Number of Carbs: One
- RPM Range: 1500-6500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Best for the Ultimate in Street High-Performance
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 Deg. Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
- Edelbrock Total Power Package Maximizes Gains
- Cast Finish
Edelbrock part #7193 Performer RPM 440 intake manifold is designed for 413-426-440 c.i.d. Chrysler V8 applications. The dual-plane design results in excellent low-rpm torque and outstanding high-rpm hp. For high-performance'street/strip applications.

Brand: Edelbrock

Vehicle	Submodel	Engine VIN	Block	Engine	CID	CC
1968 - Plymouth Fury I	Base	L	V	8 Cyl 7.2L	440	7211

1971 Plymouth Fury I Engine Intake Manifold - Lower 8 Cyl 6.3L Weiand - Action +Plus Intake Manifold

Part # P311-141F0F6 Manu # 8008WND Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $425.70

Power Band Idle-6000 RPM; Low Rise; Square Bore Carb. Mounting Flange; 3.62 in. Front H/4.00 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; Low Rise; Square Bore Carb. Mounting Flange; 3.62 in. Front H/4.00 in. Rear H; No EGR Provisions; Satin Finish;
Action +Plus Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine: Chrysler Big Block V8
- Engine Make/Size: Chrysler Big Block V8
- Front Height: 3.620 In.
- Fuel System Type: Carb
- Manifold Type: Low Rise
- Number of Carbs: One
- RPM Range: Idle-6000
- Usage: Street/strip
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Port Size 2.14 in. Height x 1.11 in. Width
- Height Front 3.62 in.
- Rear 4.00 in.
- Medium Rise/Dual Plane Design For Maximum Torque
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking/Consistent Casting
- Dyno Proven To Make 25hp Over Competition
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
Action +Plus Intake Manifold 361, 383, 400 V8This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.

Brand: Weiand

Position: Lower

Vehicle	Position	Block	Engine	CID	CC
1971 - Plymouth Fury I	Lower	V	8 Cyl 6.3L	383	-

1973 Plymouth Fury I Engine Intake Manifold - Lower 8 Cyl 5.9L Weiand - Stealth Intake Manifold

Part # P311-29C7E7A Manu # 8022WND Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $536.42

Stealth™ Intake Manifold
Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
Stealth™ Intake Manifold; Lower; Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;
Stealth(TM) Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chrysler Small Block V8
- Front Height: 4.880 In.
- Fuel System Type: Carb
- Manifold Type: High Rise
- Number of Carbs: One
- Rear Height: 5.940 In.
- RPM Range: Idle-6800
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- High Rise/Dual Plane Design
- Square Bore Carburetor Mounting Flange
- No EGR Provisions
- Idle-6800 RPM Power Band
- Height Front 4.88 in.
- Rear 5.94 in.
- Port Size 1.96 in. Height x 1.00 in. Width
Stealth Intake Manifold 318 (late style), 340, 360 V8 This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand!

Brand: Weiand

Position: Lower

Vehicle	Position	Block	Engine	CID	CC
1973 - Plymouth Fury I	Lower	V	8 Cyl 5.9L	360	-

1971 Plymouth Fury I Engine Intake Manifold - Lower 8 Cyl 6.3L Weiand - Action +Plus Intake Manifold

Part # P311-141F0F6 Manu # 8008WND Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $425.70

Power Band Idle-6000 RPM; Low Rise; Square Bore Carb. Mounting Flange; 3.62 in. Front H/4.00 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; Low Rise; Square Bore Carb. Mounting Flange; 3.62 in. Front H/4.00 in. Rear H; No EGR Provisions; Satin Finish;
Action +Plus Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine: Chrysler Big Block V8
- Engine Make/Size: Chrysler Big Block V8
- Front Height: 3.620 In.
- Fuel System Type: Carb
- Manifold Type: Low Rise
- Number of Carbs: One
- RPM Range: Idle-6000
- Usage: Street/strip
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Port Size 2.14 in. Height x 1.11 in. Width
- Height Front 3.62 in.
- Rear 4.00 in.
- Medium Rise/Dual Plane Design For Maximum Torque
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking/Consistent Casting
- Dyno Proven To Make 25hp Over Competition
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
Action +Plus Intake Manifold 361, 383, 400 V8This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.

Brand: Weiand

Position: Lower

Vehicle	Position	Block	Engine	CID	CC
1971 - Plymouth Fury I	Lower	V	8 Cyl 6.3L	383	-

1973 Plymouth Fury I Engine Intake Manifold - Lower 8 Cyl 5.9L Weiand - Stealth Intake Manifold

Part # P311-29C7E7A Manu # 8022WND Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $536.42

Stealth™ Intake Manifold
Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
Stealth™ Intake Manifold; Lower; Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;
Stealth(TM) Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chrysler Small Block V8
- Front Height: 4.880 In.
- Fuel System Type: Carb
- Manifold Type: High Rise
- Number of Carbs: One
- Rear Height: 5.940 In.
- RPM Range: Idle-6800
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- High Rise/Dual Plane Design
- Square Bore Carburetor Mounting Flange
- No EGR Provisions
- Idle-6800 RPM Power Band
- Height Front 4.88 in.
- Rear 5.94 in.
- Port Size 1.96 in. Height x 1.00 in. Width
Stealth Intake Manifold 318 (late style), 340, 360 V8 This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand!

Brand: Weiand

Position: Lower

Vehicle	Position	Block	Engine	CID	CC
1973 - Plymouth Fury I	Lower	V	8 Cyl 5.9L	360	-

1971 Plymouth Fury I Engine Intake Manifold 8 Cyl 5.9L Edelbrock - Performer RPM 340/360 Intake Manifold

Part # P311-5207C3B Manu # 7176 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $507.11

Non-EGR; 1500-6500rpm; For 4 bbl Carbs; Accepts Early Style Waterneck Only;CARB E.O. D-161-54 Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
MANIFOLD; 1967-91 CHRYS 318-360 (LA); PERFORMER RPM
Performer RPM 340/360 Intake Manifold
Product Attributes:
- Cylinder Head Type: Mopar 340/360
- Emission: Without Egr
- Engine Make/Size: Mopar 318-360
- Number of Carbs: One
- RPM Range: 1500-6500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Best for the Ultimate in Street High-Performance
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 Deg. Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
- Edelbrock Total Power Package Maximizes Gains
- Cast Finish
Edelbrock part #7176 Performer RPM intake manifold is designed for 340-360 c.i.d. Chrysler V8's and 318 c.i.d. engines with 340-360 cylinder heads. Latest technology in dual-plane design results in both excellent low-rpm torque and outstanding high rpm horsepower. Recommended for high-performance'street, strip and fresh water marine applications. Accepts 1975 and earlier waterneck only. Will not accept stock Thermo-Quad carburetor. Will not fit 1992 and later Magnum engines. Match with Performer RPM heads #60779 for maximum performance.

Brand: Edelbrock

Vehicle	Submodel	Block	Engine	CID	CC
1971 - Plymouth Fury I	Base	V	8 Cyl 5.9L	360	-

1969 Plymouth Fury I Engine Intake Manifold 8 Cyl 5.2L Edelbrock - Performer Series Intake Manifold

Part # P311-57B30F3 Manu # 2176 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $451.34

Cast Finish; 4 bbl Carb; Non-EGR; Idle-5500 rpm;Not Legal For Sale Or Use In California Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
MANIFOLD; 1967-91 CHRY 318-360(LA) PERFORMER; NON-EGR
Performer Series Intake Manifold
Product Attributes:
- Cylinder Head Type:
  - Mopar 318
  - Mopar 340/360
- Emission: Without Egr
- Engine Make/Size: Mopar 318-360
- Number of Carbs: One
- RPM Range: Idle-5500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock part #2176 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

Brand: Edelbrock

Vehicle	Submodel	Block	Engine	CID	CC
1969 - Plymouth Fury I	Base	V	8 Cyl 5.2L	318	5211

1968 Plymouth Fury I Engine Intake Manifold 8 Cyl 7.2L Edelbrock - Dual-Quad Intake Manifold

Part # P311-1C62A25 Manu # 2475 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $640.44

2500-6500 rpm; CH-6B Chrysler 6-Pack; Non-EGR; For 3x2 bbl Carbs;Not Legal For Sale Or Use In California Replacement For Chrysler 6-Pack PN[04529056]~Recommend Edelbrock Gasket PN[7225] for Manifold Gasket~Stock Replacement Part
MANIFOLD; 1959-79 CHRY 361-440 (RB); CH-6B; SIX-PACK
Dual-Quad Intake Manifold
Product Attributes:
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Mopar 413-440
- Number of Carbs: Three
- RPM Range: 2500-6500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Famous 6-Pack Intake
- OEM For Factory Six-Pack Engines
- Designed for 2500 to 6500 RPM Performance
- Manifold Has Balanced 180+ Firing Order
- Smooth and Consistent Part-Throttle Power
- Offers Excellent Performance Potential
- Match with Other Dual-Quad Items for Total Package
- Stock Replacement Part
Edelbrock part #2475 CH-6B Chrysler 6-pack intake manifold is designed for 440 c.i.d. Chrysler engines with 3x2-bbl. carbs, also fits 413 and 426 Wedge. #2475 is stock replacement/street legal part for 440 V8's with OEM 3x2-bbl. carbs; 1968-71. This manifold was original equipment on Chrysler 440 Six-Pack engines, Chrysler #P4529056. Will not fit 1962-64 Max Wedge heads. The Edelbrock CH-6B Chrysler 6-pack intake manifold is machined for the OEM 3x2-bbl 4-bolt carburetors.

Brand: Edelbrock

Vehicle	Submodel	Engine VIN	Block	Engine	CID	CC
1968 - Plymouth Fury I	Base	L	V	8 Cyl 7.2L	440	7211

1968 Plymouth Fury I Engine Intake Manifold 8 Cyl 7.2L Edelbrock - Performer 440 Intake Manifold

Part # P311-35FFE67 Manu # 2191 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $407.64

EGR/Non-EGR; Idle-5500 rpm; For 4 bbl Carbs;Not Legal For Sale Or Use In California Recommend Edelbrock Gasket PN[7225] for Manifold Gasket~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
MANIFOLD; 1959-79 CHRY 383/440; PERFORMER EGR; NON-EGR
Performer 440 Intake Manifold
Product Attributes:
- Cylinder Head Type: Standard
- Emission:
  - With Egr
  - Without Egr
- Engine Make/Size: Mopar 413-440
- Number of Carbs: One
- RPM Range: Idle -5500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock part #2191 Performer 440 intake manifold is designed for street 413-426-440 c.i.d. Chrysler V8's that measure 8.75" across block. Will not fit 1962-64 Max Wedge heads. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

Brand: Edelbrock

Vehicle	Submodel	Engine VIN	Block	Engine	CID	CC
1968 - Plymouth Fury I	Base	L	V	8 Cyl 7.2L	440	7211

1970 Plymouth Fury I Engine Intake Manifold 8 Cyl 5.2L Edelbrock - Performer Series Intake Manifold

Part # P311-42F22AF Manu # 21763 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $580.85

Black Finish; 4 bbl Carb; Non-EGR; Idle-5500 rpm;Not Legal For Sale Or Use In California Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
MANIFOLD; 1967-91 CHRY 318-360(LA) PERFORMER NON-EGR; BLACK
Performer Series Intake Manifold
Product Attributes:
- Cylinder Head Type:
  - Mopar 318
  - Mopar 340/360
- Emission: Without Egr
- Engine Make/Size: Mopar 318-360
- Number of Carbs: One
- RPM Range: Idle-5500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock part #21763 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.

Brand: Edelbrock

Vehicle	Submodel	Block	Engine	CID	CC
1970 - Plymouth Fury I	Base	V	8 Cyl 5.2L	318	5211

1970 Plymouth Fury I Engine Intake Manifold 8 Cyl 6.3L Edelbrock - Performer 383 Intake Manifold

Part # P311-29C3EE2 Manu # 2186 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $444.32

Satin Finish; EGR/Non-EGR; Idle-5500 rpm; For 4 bbl Carbs;Not Legal For Sale Or Use In California Recommend Edelbrock Gasket PN[7225] for Manifold Gasket~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
MANIFOLD; 1958-78 CHRY 361-400 (B); PERFORMER; EGR/NON-EGR
Performer 383 Intake Manifold
Product Attributes:
- Cylinder Head Type: Standard
- Emission:
  - With Egr
  - Without Egr
- Engine Make/Size: Mopar 361-400
- Number of Carbs: One
- RPM Range: Idle -5500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock part #2186 Performer 383 intake manifold is designed for street 361-383-400 c.i.d. Chrysler V8's that measure 7.75" across block. May be used with OEM or aftermarket carbs. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

Brand: Edelbrock

Vehicle	Submodel	Block	Engine	CID	CC
1970 - Plymouth Fury I	Base	V	8 Cyl 6.3L	383	6286

1970 Plymouth Fury I Engine Intake Manifold 8 Cyl 7.2L Edelbrock - CH-28 Dual-Quad Intake Manifold

Part # P311-25A7149 Manu # 5440 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $574.54

1500-6000 rpm; Non-EGR;CARB E.O. D-161-54 Use Edelbrock Camshaft Kit PN[2192] For Low-Torque Needs~Use Edelbrock Camshaft Kit PN[5092] For Top-End Power~Recommend Edelbrock Gasket PN[7225] for Manifold Gasket~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
MANIFOLD; 1959-79 CHRYS 440; DUAL-QUAD; CH-28; VINTAGE SERIES
CH-28 Dual-Quad Intake Manifold
Product Attributes:
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Mopar 413-440
- Number of Carbs: Two
- RPM Range: 1500-6000
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Designed for 1500 to 6000 RPM Performance
- Manifold Has Balanced 180+ Firing Order
- Smooth and Consistent Part-Throttle Power
- Offers Excellent Performance Potential
- Carburetor Center-To-Center Dimensions 6.4375 in.
- Match with Other Dual-Quad Items for Total Package
- Engine Swaps
Edelbrock part #5440 Chrysler CH-28 Dual-Quad intake manifold is designed for 413-426-440 c.i.d. Chrysler V8's. Use with Performer-Plus cam #2192 for low-end torque or Performer RPM cam #7194 for top-end power. Will not fit 1962-64 Max Wedge heads. Carb center to carb center: 6-7/16". Manifold measures 8.75" across block.

Brand: Edelbrock

Vehicle	Submodel	Block	Engine	CID	CC
1970 - Plymouth Fury I	Base	V	8 Cyl 7.2L	440	7211

1972 Plymouth Fury I Engine Intake Manifold 8 Cyl 5.9L Edelbrock - Performer 318/360 Intake Manifold

Part # P311-577157F Manu # 3776 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $511.62

EGR; Idle-5500rpm; For 4 bbl Carbs;Not Legal For Sale Or Use In California Use Chrysler Intake Gasket PN[4397642]~Recommend Edelbrock Gasket PN[7276] for Manifold Gasket~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
MANIFOLD; 1967-87 CHRYS 318-360 (LA); EGR; SPREAD BORE; PERFORMER
Performer 318/360 Intake Manifold
Product Attributes:
- Cylinder Head Type:
  - Mopar 318
  - Mopar 340/360
- Emission: With Egr
- Engine Make/Size: Mopar 318-360
- Number of Carbs: One
- RPM Range: Idle -5500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock part #3776 Performer EGR intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's with EGR valve. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines.

Brand: Edelbrock

Vehicle	Submodel	Block	Engine	CID	CC
1972 - Plymouth Fury I	Base	V	8 Cyl 5.9L	360	-

1973 Plymouth Fury I Engine Intake Manifold 8 Cyl 5.2L Edelbrock - Performer 318/360 Intake Manifold

Part # P311-577157F Manu # 3776 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $511.62

EGR; Idle-5500rpm; For 4 bbl Carbs;Not Legal For Sale Or Use In California Use Chrysler Intake Gasket PN[4494462AB]~Recommend Edelbrock Gasket PN[7276] for Manifold Gasket~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
MANIFOLD; 1967-87 CHRYS 318-360 (LA); EGR; SPREAD BORE; PERFORMER
Performer 318/360 Intake Manifold
Product Attributes:
- Cylinder Head Type:
  - Mopar 318
  - Mopar 340/360
- Emission: With Egr
- Engine Make/Size: Mopar 318-360
- Number of Carbs: One
- RPM Range: Idle -5500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock part #3776 Performer EGR intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's with EGR valve. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines.

Brand: Edelbrock

Vehicle	Submodel	Block	Engine	CID	CC
1973 - Plymouth Fury I	Base	V	8 Cyl 5.2L	318	5211

Engine Intake Manifold Holley

Part # P311-274291F Manu # 300-269 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $470.25

EFI Intake Manifold
EFI Intake Manifold; Single Plane; Fits w/Gen III LS Engines w/LS7 Cylinder Heads; 4150 Flange; Incl Fuel Rails/Hardware/Gaskets; Cast Aluminum; Silver;
Product Attributes:
- Cylinder Head Type: Ls7
- Engine Make/Size: Gen. Iii Ls1/ls2/ls6
- Usage: Racing
- WARNING CA Proposition 65: No
Features:
- 4150 Square Bore Flange
- Cast Aluminum Construction
Single Plane EFI LS Intake Manifold. Fits all GM LS Gen III engines equipped with LS7 cylinder heads. Designed with a 4150 Square bore flange. Optimized runner layout and constant cross sectional area - broad torque curve, best vehicle performance from 2500-7000 RPM Minimum carb flange height - fit in vehicles with minimum hood modifications. Cast aluminum construction - great manifold for centrifugal blower, turbocharged or NOS power adder applications The manifold kit includes the fuel rails, mounting hardware, and o-ring cylinder head mounting flange gaskets.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-0366011 Manu # 29087 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $455.31

Victor Jr. Series Intake Manifold
MANIFOLD; GM LS1; VICTOR JR; CARBURETED; 4150 FLANGE
Product Attributes:
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block Ls1
- Number of Carbs: One
- RPM Range: 3500-7500
- Usage: Racing
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Converts LS1 Engine to Square Bore Carburetor
- Power Increase From 100-500+ HP
- Use OEM Factory O-Rings for Intake Gasket
Edelbrock part #29087 Victor Jr. LS1 intake manifold is a high-rise single-plane intake capable of supporting up to 600 hp. The Victor Jr. LS1 features a flange that accepts a square-bore carburetors. It can be used on LS2 applications when matched with MSD's #6012 LS2 ignition controller (available through MSD Performance). Includes a throttle bracket designed to work with 700R-4, 200R-4 and Turbo 350 transmissions. Most applications will require hood modification.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Engine Intake Manifold Edelbrock

Part # P311-0199EAF Manu # 7158 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $628.86

Performer RPM Intake Manifold
MANIFOLD; 1958-65 CHEV 348-409; SMALL PORT; PERFORMER RPM
Product Attributes:
- Cylinder Head Type: Oval Port- Large
- Emission: Without Egr
- Engine Make/Size: Chevy 348-409
- Number of Carbs: One
- RPM Range: 1500-6500
- Usage: Racing
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Designed for 1500 to 6500 RPM Performance
- Bright Silver Chrome Finish That Will Not Discolor
- For Large Port Or RPM W-Series Heads
Edelbrock part #7158 Performer RPM small port intake manifold is designed to fit 1958-1965 Chevrolet 348/409 "W" big-block engines. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. For square-bore carburetors only.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edelbrock

Vehicle

Finish Selecting Your Vehicle to Shop For Your Intake Manifold

Shop By Brand

Shop By Related Engine Intake Manifold Parts

Shop for Top Selling Genuine Plymouth Fury I Intake Manifolds

Shop Plymouth Fury I Intake Manifolds

Finish Selecting Your Vehicle to Shop For Your Intake Manifold

Shop By Brand

Shop By Related Engine Intake Manifold Parts

Shop for Top Selling Genuine Plymouth Fury I Intake Manifolds