Shop Plymouth Duster Intake Manifolds

Choose Vehicle Year

Finish Selecting Your Vehicle to Shop For Your Intake Manifold

Choose a Year for your Plymouth Duster 's Intake Manifold

  • 1976
  • 1975
  • 1974
  • 1973
  • 1972
  • 1971
  • 1970

Shop By Brand

The Following brands are available based on your search.

  • Edelbrock
    Edelbrock
  • FAST
    FAST
  • Ford Racing
    Ford Racing
  • Holley
    Holley
  • Racing Head Service (RHS)
    Racing Head Service (RHS)
  • Weiand
    Weiand

Shop By Related Engine Intake Manifold Parts

Shop below for all Engine Intake Manifold related parts for your Plymouth Duster

Engine Intake Manifold
Engine Intake Manifold
Engine Intake Manifold Bolt Set
Engine Intake Manifold Bolt Set
Engine Intake Manifold Gasket
Engine Intake Manifold Gasket
Engine Intake Manifold Gasket Set
Engine Intake Manifold Gasket Set

Shop for Top Selling Genuine Plymouth Duster Intake Manifolds

  • We Stock the following top leading brands, including Edelbrock, Weiand, Holley
  • Constantly Updated Inventory of Plymouth Duster Replacement Intake Manifold Parts

We also have Intake Manifold parts for other Plymouth models, including Barracuda, Belvedere, Belvedere II, Breeze, Caravelle, Cuda, Custom, Duster, Fleet Special, Fury, Fury I, Fury II, Fury III, GTX, Gran Fury, Neon, PB100, PB100 Van, PB150, PB200, PB200 Van, PB250, PB300, PB300 Van, PB350, Plaza, Satellite, Savoy, Scamp, Sport Wagon, Suburban, Superbird, Trailduster, VIP, Valiant, Volare.


Edelbrock
1976 Plymouth Duster Engine Intake Manifold 8 Cyl 5.9L Edelbrock - RPM Air-Gap Intake Manifold

P311-470C321    7576  New

Qty:
In Stock & Ready to Ship
$536.16
Edelbrock Engine Intake Manifold
  • Cast Finish; 4 bbl Carb; Non-EGR; 1500-6500rpm; Accepts Early-Style Waterneck Only;CARB E.O. D-161-54 Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
  • MANIFOLD; 1967-91 CHRYS 318-360; RPM AIR-GAP
  • RPM Air-Gap Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Mopar 340/360
    • Emission: Without Egr
    • Engine Make/Size: Mopar 318-360
    • Number of Carbs: One
    • RPM Range: 1500-6500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Based on Performer RPM-Series with Unique Air Gap
    • Air Gap Causes Cool and Dense Mixture More Power
    • Designed for 1500 to 6500 RPM Street-Driven Power
    • Dual-Plane High-Rise Intake
    • Accepts Early-Style Water Neck
  • Edelbrock part #7576 RPM Air-Gap intake manifold is designed for 340-360 c.i.d. Chrysler V8's and 318 c.i.d. engines with 340-360 cylinder heads. This RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition intakes for years. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Accepts 1975 and earlier waterneck only. No provision for exhaust heated chokes and no exhaust crossover. Will not accept stock Thermo-Quad carburetor. Will not fit 1992 and later Magnum engines. Includes nitrous bosses.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1976 - Plymouth Duster V 8 Cyl 5.9L 360 -
Weiand
1970 Plymouth Duster Engine Intake Manifold - Lower 8 Cyl 5.6L Weiand - Action +Plus Intake Manifold

P311-3DC90FB    8007WND  New

Qty:
In Stock & Ready to Ship
$511.89
Weiand Engine Intake Manifold Lower
  • Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Square Bore Carburetors May Require PN[9006] To Seal Properly~Rotary A/C Compressor Will Not Clear On 1978 And Later Applications~Legal Only For Off-Highway Use Or Racing
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chrysler Small Block V8
    • Front Height: 4.880 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Rear Height: 5.940 In.
    • RPM Range: Idle-6000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
    • High Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1970 - Plymouth Duster Lower V 8 Cyl 5.6L 340 -
Weiand
1973 Plymouth Duster Engine Intake Manifold - Lower 8 Cyl 5.6L Weiand - Action +Plus Intake Manifold

P311-3DC90FB    8007WND  New

Qty:
In Stock & Ready to Ship
$511.89
Weiand Engine Intake Manifold Lower
  • Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chrysler Small Block V8
    • Front Height: 4.880 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Rear Height: 5.940 In.
    • RPM Range: Idle-6000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
    • High Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1973 - Plymouth Duster Lower V 8 Cyl 5.6L 340 5572
Weiand
1973 Plymouth Duster Engine Intake Manifold - Lower 8 Cyl 5.6L Weiand - Action +Plus Intake Manifold

P311-3DC90FB    8007WND  New

Qty:
In Stock & Ready to Ship
$511.89
Weiand Engine Intake Manifold Lower
  • Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing~Rotary A/C Compressor Will Not Clear On 1978 And Later Applications~Square Bore Carburetors May Require PN[9006] To Seal Properly
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chrysler Small Block V8
    • Front Height: 4.880 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Rear Height: 5.940 In.
    • RPM Range: Idle-6000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
    • High Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1973 - Plymouth Duster Lower V 8 Cyl 5.6L 340 5572
Weiand
1971 Plymouth Duster Engine Intake Manifold - Lower 8 Cyl 5.6L Weiand - Action +Plus Intake Manifold

P311-3DC90FB    8007WND  New

Qty:
In Stock & Ready to Ship
$511.89
Weiand Engine Intake Manifold Lower
  • Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chrysler Small Block V8
    • Front Height: 4.880 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Rear Height: 5.940 In.
    • RPM Range: Idle-6000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
    • High Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Engine VIN Position Block Engine CID CC
1971 - Plymouth Duster H Lower V 8 Cyl 5.6L 340 5572
Weiand
1970 Plymouth Duster Engine Intake Manifold - Lower 8 Cyl 5.6L Weiand - Stealth Intake Manifold

P311-29C7E7A    8022WND  New

Qty:
In Stock & Ready to Ship
$536.42
Weiand Engine Intake Manifold Lower
  • Stealth™ Intake Manifold
  • Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Stealth™ Intake Manifold; Lower; Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;
  • Stealth(TM) Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chrysler Small Block V8
    • Front Height: 4.880 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Rear Height: 5.940 In.
    • RPM Range: Idle-6800
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • High Rise/Dual Plane Design
    • Square Bore Carburetor Mounting Flange
    • No EGR Provisions
    • Idle-6800 RPM Power Band
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
  • Stealth Intake Manifold 318 (late style), 340, 360 V8 This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand!
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Engine VIN Position Block Engine CID CC
1970 - Plymouth Duster J Lower V 8 Cyl 5.6L 340 5572
Weiand
1971 Plymouth Duster Engine Intake Manifold - Lower 8 Cyl 5.6L Weiand - Stealth Intake Manifold

P311-29C7E7A    8022WND  New

Qty:
In Stock & Ready to Ship
$536.42
Weiand Engine Intake Manifold Lower
  • Stealth™ Intake Manifold
  • Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Stealth™ Intake Manifold; Lower; Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;
  • Stealth(TM) Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chrysler Small Block V8
    • Front Height: 4.880 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Rear Height: 5.940 In.
    • RPM Range: Idle-6800
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • High Rise/Dual Plane Design
    • Square Bore Carburetor Mounting Flange
    • No EGR Provisions
    • Idle-6800 RPM Power Band
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
  • Stealth Intake Manifold 318 (late style), 340, 360 V8 This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand!
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1971 - Plymouth Duster Lower V 8 Cyl 5.6L 340 -
Edelbrock
1976 Plymouth Duster Engine Intake Manifold 8 Cyl 5.9L Edelbrock - Performer RPM 340/360 Intake Manifold

P311-5207C3B    7176  New

Qty:
In Stock & Ready to Ship
$507.11
Edelbrock Engine Intake Manifold
  • Non-EGR; 1500-6500rpm; For 4 bbl Carbs; Accepts Early Style Waterneck Only;CARB E.O. D-161-54 Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
  • MANIFOLD; 1967-91 CHRYS 318-360 (LA); PERFORMER RPM
  • Performer RPM 340/360 Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Mopar 340/360
    • Emission: Without Egr
    • Engine Make/Size: Mopar 318-360
    • Number of Carbs: One
    • RPM Range: 1500-6500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Best for the Ultimate in Street High-Performance
    • Designed for 1500 to 6500 RPM Street-Driven Power
    • Dual-Plane High-Rise Intake w/180 Deg. Firing Order
    • Produces Incredible Top-End Horsepower
    • Retains Good Throttle Response and Acceleration
    • Larger Plenum and Runners Maximizes Other Upgrades
    • Edelbrock Total Power Package Maximizes Gains
    • Cast Finish
  • Edelbrock part #7176 Performer RPM intake manifold is designed for 340-360 c.i.d. Chrysler V8's and 318 c.i.d. engines with 340-360 cylinder heads. Latest technology in dual-plane design results in both excellent low-rpm torque and outstanding high rpm horsepower. Recommended for high-performance'street, strip and fresh water marine applications. Accepts 1975 and earlier waterneck only. Will not accept stock Thermo-Quad carburetor. Will not fit 1992 and later Magnum engines. Match with Performer RPM heads #60779 for maximum performance.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1976 - Plymouth Duster V 8 Cyl 5.9L 360 -
Edelbrock
1970 Plymouth Duster Engine Intake Manifold 8 Cyl 5.2L Edelbrock - Performer Series Intake Manifold

P311-57B30F3    2176  New

Qty:
In Stock & Ready to Ship
$451.34
Edelbrock Engine Intake Manifold
  • Cast Finish; 4 bbl Carb; Non-EGR; Idle-5500 rpm;Not Legal For Sale Or Use In California Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
  • MANIFOLD; 1967-91 CHRY 318-360(LA) PERFORMER; NON-EGR
  • Performer Series Intake Manifold
  • Product Attributes:
    • Cylinder Head Type:
      • Mopar 318
      • Mopar 340/360
    • Emission: Without Egr
    • Engine Make/Size: Mopar 318-360
    • Number of Carbs: One
    • RPM Range: Idle-5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
  • Edelbrock part #2176 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1970 - Plymouth Duster Base V 8 Cyl 5.2L 318 5211
Edelbrock
1976 Plymouth Duster Engine Intake Manifold 8 Cyl 5.2L Edelbrock - Performer Series Intake Manifold

P311-42F22AF    21763  New

Qty:
In Stock & Ready to Ship
$580.85
Edelbrock Engine Intake Manifold
  • Black Finish; 4 bbl Carb; Non-EGR; Idle-5500 rpm;Not Legal For Sale Or Use In California Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
  • MANIFOLD; 1967-91 CHRY 318-360(LA) PERFORMER NON-EGR; BLACK
  • Performer Series Intake Manifold
  • Product Attributes:
    • Cylinder Head Type:
      • Mopar 318
      • Mopar 340/360
    • Emission: Without Egr
    • Engine Make/Size: Mopar 318-360
    • Number of Carbs: One
    • RPM Range: Idle-5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
  • Edelbrock part #21763 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1976 - Plymouth Duster V 8 Cyl 5.2L 318 5211
Edelbrock
1975 Plymouth Duster Engine Intake Manifold 8 Cyl 5.2L Edelbrock - Performer 318/360 Intake Manifold

P311-577157F    3776  New

Qty:
In Stock & Ready to Ship
$511.62
Edelbrock Engine Intake Manifold
  • EGR; Idle-5500rpm; For 4 bbl Carbs;Not Legal For Sale Or Use In California Use Chrysler Intake Gasket PN[4494462AB]~Recommend Edelbrock Gasket PN[7276] for Manifold Gasket~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
  • MANIFOLD; 1967-87 CHRYS 318-360 (LA); EGR; SPREAD BORE; PERFORMER
  • Performer 318/360 Intake Manifold
  • Product Attributes:
    • Cylinder Head Type:
      • Mopar 318
      • Mopar 340/360
    • Emission: With Egr
    • Engine Make/Size: Mopar 318-360
    • Number of Carbs: One
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
  • Edelbrock part #3776 Performer EGR intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's with EGR valve. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1975 - Plymouth Duster Custom V 8 Cyl 5.2L 318 5211
Edelbrock
1976 Plymouth Duster Engine Intake Manifold 8 Cyl 5.9L Edelbrock - Performer 318/360 Intake Manifold

P311-577157F    3776  New

Qty:
In Stock & Ready to Ship
$511.62
Edelbrock Engine Intake Manifold
  • EGR; Idle-5500rpm; For 4 bbl Carbs;Not Legal For Sale Or Use In California Use Chrysler Intake Gasket PN[4397642]~Recommend Edelbrock Gasket PN[7276] for Manifold Gasket~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
  • MANIFOLD; 1967-87 CHRYS 318-360 (LA); EGR; SPREAD BORE; PERFORMER
  • Performer 318/360 Intake Manifold
  • Product Attributes:
    • Cylinder Head Type:
      • Mopar 318
      • Mopar 340/360
    • Emission: With Egr
    • Engine Make/Size: Mopar 318-360
    • Number of Carbs: One
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
  • Edelbrock part #3776 Performer EGR intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's with EGR valve. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1976 - Plymouth Duster V 8 Cyl 5.9L 360 -
Holley
Engine Intake Manifold Holley

P311-274291F    300-269  New

Qty:
In Stock & Ready to Ship
$470.25
Holley Engine Intake Manifold
  • EFI Intake Manifold
  • EFI Intake Manifold; Single Plane; Fits w/Gen III LS Engines w/LS7 Cylinder Heads; 4150 Flange; Incl Fuel Rails/Hardware/Gaskets; Cast Aluminum; Silver;
  • Product Attributes:
    • Cylinder Head Type: Ls7
    • Engine Make/Size: Gen. Iii Ls1/ls2/ls6
    • Usage: Racing
    • WARNING CA Proposition 65: No
  • Features:
    • 4150 Square Bore Flange
    • Cast Aluminum Construction
  • Single Plane EFI LS Intake Manifold. Fits all GM LS Gen III engines equipped with LS7 cylinder heads. Designed with a 4150 Square bore flange. Optimized runner layout and constant cross sectional area - broad torque curve, best vehicle performance from 2500-7000 RPM Minimum carb flange height - fit in vehicles with minimum hood modifications. Cast aluminum construction - great manifold for centrifugal blower, turbocharged or NOS power adder applications The manifold kit includes the fuel rails, mounting hardware, and o-ring cylinder head mounting flange gaskets.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-0366011    29087  New

Qty:
In Stock & Ready to Ship
$455.31
Edelbrock Engine Intake Manifold
  • Victor Jr. Series Intake Manifold
  • MANIFOLD; GM LS1; VICTOR JR; CARBURETED; 4150 FLANGE
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block Ls1
    • Number of Carbs: One
    • RPM Range: 3500-7500
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Converts LS1 Engine to Square Bore Carburetor
    • Power Increase From 100-500+ HP
    • Use OEM Factory O-Rings for Intake Gasket
  • Edelbrock part #29087 Victor Jr. LS1 intake manifold is a high-rise single-plane intake capable of supporting up to 600 hp. The Victor Jr. LS1 features a flange that accepts a square-bore carburetors. It can be used on LS2 applications when matched with MSD's #6012 LS2 ignition controller (available through MSD Performance). Includes a throttle bracket designed to work with 700R-4, 200R-4 and Turbo 350 transmissions. Most applications will require hood modification.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-0199EAF    7158  New

Qty:
In Stock & Ready to Ship
$628.86
Edelbrock Engine Intake Manifold
  • Performer RPM Intake Manifold
  • MANIFOLD; 1958-65 CHEV 348-409; SMALL PORT; PERFORMER RPM
  • Product Attributes:
    • Cylinder Head Type: Oval Port- Large
    • Emission: Without Egr
    • Engine Make/Size: Chevy 348-409
    • Number of Carbs: One
    • RPM Range: 1500-6500
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Designed for 1500 to 6500 RPM Performance
    • Bright Silver Chrome Finish That Will Not Discolor
    • For Large Port Or RPM W-Series Heads
  • Edelbrock part #7158 Performer RPM small port intake manifold is designed to fit 1958-1965 Chevrolet 348/409 "W" big-block engines. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. For square-bore carburetors only.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-19192B3    300-256  New

Qty:
In Stock & Ready to Ship
$638.66
Holley Engine Intake Manifold
  • Race Intake Manifold
  • Race Intake Manifold; Single Plane; Split-Design; 4150 Square Bore Flange; 7.32in. Front/Rear Height; 2500-7000 RPM Band; Includes Shoulder Bolt Locators/O-Ring Seals; Satin Finish;
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Gm Ls1/ls2/ls6
    • Flange Type: 4150 Square Bore
    • Front Height: 7.320 In.
    • Fuel System Type: Carb
    • Manifold Type: Single Plane
    • Number of Carbs: One
    • Rear Height: 7.320 In.
    • RPM Range: 2500-7000
    • Usage: Racing
    • WARNING CA Proposition 65: No
  • Features:
    • Maximum Performance Race Design w/Hood Clearance Consideration
    • Lighter Than Other Split Race Intakes
    • Split Feature Making Porting Efforts Easy
    • 1/3 to 1/2 The Price Of Other Split Race Intakes
    • Captured O-Ring Seals At Head Ports and Split
    • Vacuum Port Options Includes (2) 1/8
    • (1) 1/4
    • (1) 3/8 NPT Ports
    • A-B Height - 7.32 in. (0 Deg carb flange angle)
    • Port Size 3.28 in. Height x 1.10 in. Wide
    • Carb Flange - Std 4150 For Up To 1-3/4 in. Diameter Throttle Bores
    • As-Cast Runner Area - 3.5 in. Square at Runner Entry
    • As-Cast Runner Area - Tapered To 2.9 in. Square at Flange Exit
  • The new Holley Single-Plane Race intake manifold were designed with performance in mind. They feature a race bred, two piece split feature that was previously only found on the most expensive race intakes. The manifold will fit GM LS Gen III engines with cathedral port heads and are intended for 4150 style square bore flanged carburetors or throttle body EFI.The LS Race single-plane intake manifold was designed for hi-performance/racing engine applications, 5.3 to 6.2+ liter displacement, and maximum engine speeds of 6000-7000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the RPM spectrum while providing maximum performance up to 7000 rpm.The Holley LS Race manifold incorporates a split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap. With shoulder bolt locators and O-ring seal, reassembly is simple and precise. Technical Data‚· A-B Height - 7.32 in. (0° carb flange angle)ï‚· Port Size- 3.28 in. Height x 1.10 in. Wide‚· Carburetor Flange - Standard 4150 for up to 1-3/4 in. diameter throttle boresï‚· As-Cast Runner Cross-Sectional Area - 3.5 in² at the runner entry tapered to 2.9 in² at the flange exit

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-1657041    28097  New

Qty:
In Stock & Ready to Ship
$661.77
Edelbrock Engine Intake Manifold
  • Super Victor LS1 Intake Manifold
  • MANIFOLD; GM LS1/LS2; SUPER VICTOR; 4BBL CARB
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block Ls1
    • Number of Carbs: One
    • RPM Range: 3500-8000
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Offers Greater Air Flow Potential
    • Bigger Power Gains
    • Accepted By NASCAR For Grand National Series
    • For Use With Carburetor
  • Edelbrock part #28097 Super Victor LS1 intake manifold offers greater air flow potential for even bigger power gains, this manifold has been accepted by NASCAR for use in the Grand National West/Grand National East series. The carb mount pad is 1.12" taller than the Victor Jr. LS1, and the port exits have been increased to 1.08" x 2.74". Edelbrock offers the optional LS1 Timing Control Module #91238 to drive the stock LS1 Coil-on-Plug ignition system. LS2 applications require MSD's #6012 LS2 ignition controller (available through MSD Performance).

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-58612EF    29025  New

Qty:
In Stock & Ready to Ship
$597.35
Edelbrock Engine Intake Manifold
  • Victor Jr. Series Intake Manifold
  • MANIFOLD; GM 454-R; VICTOR JR; EFI; RECTANGLE PORT
  • Product Attributes:
    • Cylinder Head Type: Oval Port- Large
    • Emission: Without Egr
    • Engine Make/Size: Chevy Big Block (396-502)
    • Number of Carbs: None; For Fuel Injection
    • RPM Range: 3500-7500
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Race-Winning Design For All Types Of Competition
    • Single-Plane Maximizes Torque And Horsepower
    • Runners Feature Extra Material for Custom Porting
    • For Performance in 3500 to 7500 RPM Range
    • Ideal for 502 cid and Smaller Competition Engines
  • Edelbrock part #29025 Victor Jr. 454-R EFI intake manifold is designed for competition 396-502 big-block Chevy engines with rectangular-port cylinder heads. It features extended runner dividers, smaller plenum chambers and unique runner design for better 60 foot times and max power from 3500 to 7500 rpm. These intake manifolds are especially suited to 502 c.i.d. and smaller competition engines. The Edelbrock Victor Jr. 454-R EFI intake manifold will fit Edelbrock Victor race cylinder heads #77609 and Victor 24 degree #77409, #77459, #77429, #77479 and #77489.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-2E71029    7524  New

Qty:
In Stock & Ready to Ship
$733.30
Edelbrock Engine Intake Manifold
  • Dual-Quad Intake Manifold
  • MANIFOLD; 1964-71 GEN II HEMI; DUAL-QUAD; PERFORMER RPM
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Mopar 426-572 Hemi
    • Number of Carbs: Two
    • RPM Range: 2500-6500
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Single-Plane Air-Gap Design
    • Dual 4150 Style Carb Pads
    • Compatible With Factory Cylinder Heads
  • Edelbrock part #7524 Dual-Quad HEMI intake manifold is intended for use with Mopar Gen II (1964-71) 426-572 HEMI engines operating in the 2,500 to 6,500+ range. This new intake manifold is a single-plane Air-Gap design with a dual square-bore 4150 style carburetor pad. Carburetor spacing and height are the same as Mopar Performance dual-quad #P5153737, making it a direct bolt-on to all vehicles with a shaker hood. They also retain the same carburetor linkage location from the factory. The Dual-Quad HEMI is compatible with factory style cylinder heads, but optimized for use with Edelbrock Victor Jr. HEMI cylinder heads. Requires Edelbrock Coil Bracket #8079 for use with OE style coils.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-16CEB10    300-256BK  New

Qty:
In Stock & Ready to Ship
$674.00
Holley Engine Intake Manifold
  • Race Intake Manifold
  • Race Intake Manifold; Single Plane; Split-Design; 4150 Square Bore Flange; 7.32in. Front/Rear Height; 2500-7000 RPM Band; Includes Shoulder Bolt Locators/O-Ring Seals; Black;
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Gm Ls1/ls2/ls6
    • Number of Carbs: One
    • RPM Range: 2500-7000
    • Usage: Racing
    • WARNING CA Proposition 65: No
  • Features:
    • Maximum Performance Race Design w/Hood Clearance Consideration
    • Lighter Than Other Split Race Intakes
    • Split Feature Making Porting Efforts Easy
    • 1/3 to 1/2 The Price Of Other Split Race Intakes
    • Captured O-Ring Seals At Head Ports and Split
    • Vacuum Port Options Includes (2) 1/8
    • (1) 1/4
    • (1) 3/8 NPT Ports
    • A-B Height - 7.32 in. (0 Deg carb flange angle)
    • Port Size 3.28 in. Height x 1.10 in. Wide
    • Carb Flange - Std 4150 For Up To 1-3/4 in. Diameter Throttle Bores
    • As-Cast Runner Area - 3.5 in. Square at Runner Entry
    • As-Cast Runner Area - Tapered To 2.9 in. Square at Flange Exit
  • The new Holley Single-Plane Race intake manifold were designed with performance in mind. They feature a race bred, two piece split feature that was previously only found on the most expensive race intakes. The manifold will fit GM LS Gen III engines with cathedral port heads and are intended for 4150 style square bore flanged carburetors or throttle body EFI.The LS Race single-plane intake manifold was designed for hi-performance/racing engine applications, 5.3 to 6.2+ liter displacement, and maximum engine speeds of 6000-7000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the RPM spectrum while providing maximum performance up to 7000 rpm.The Holley LS Race manifold incorporates a split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap. With shoulder bolt locators and O-ring seal, reassembly is simple and precise. Technical Data‚· A-B Height - 7.32 in. (0° carb flange angle)ï‚· Port Size- 3.28 in. Height x 1.10 in. Wide‚· Carburetor Flange - Standard 4150 for up to 1-3/4 in. diameter throttle boresï‚· As-Cast Runner Cross-Sectional Area - 3.5 in² at the runner entry tapered to 2.9 in² at the flange exit

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle