Finish Selecting Your Vehicle to Shop For Your Intake Manifold

Choose a Year for your Oldsmobile Cutlass Tiara 's Intake Manifold

  • 1976

Shop By Brand

The Following brands are available based on your search.

  • Edelbrock
    Edelbrock
  • FAST
    FAST
  • Ford Racing
    Ford Racing
  • Holley
    Holley
  • Racing Head Service (RHS)
    Racing Head Service (RHS)
  • Weiand
    Weiand

Shop By Related Engine Intake Manifold Parts

Shop below for all Engine Intake Manifold related parts for your Oldsmobile Cutlass Tiara


Shop for Top Selling Genuine Oldsmobile Cutlass Tiara Intake Manifolds

  • We Stock the following top leading brands, including Edelbrock, Holley
  • Constantly Updated Inventory of Oldsmobile Cutlass Tiara Replacement Intake Manifold Parts

Edelbrock
Qty:
In Stock & Ready to Ship
$513.32
Edelbrock Engine Intake Manifold
  • Non-EGR; 1500-6500rpm; For 4 bbl Carbs;CARB E.O. D-161-54 Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
  • MANIFOLD; 1964-85 OLDS 307-403; PERFORMER
  • Performer RPM Olds 350 Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Olds 307-403
    • Number of Carbs: One
    • RPM Range: 1500-6500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
  • Features:
    • Best for the Ultimate in Street High-Performance
    • Designed for Idle to 5500 RPM Street-Driven Power
    • Dual-Plane High-Rise Intake w/180 Deg. Firing Order
    • Produces Incredible Top-End Horsepower
    • Retains Good Throttle Response and Acceleration
    • Larger Plenum and Runners Maximizes Other Upgrades
    • Edelbrock Total Power Package Maximizes Gains
  • Edelbrock part #7111 Performer RPM Oldsmobile 350 intake manifold is designed for 330-350-403 c.i.d. Oldsmobile's and 1980-1/2 to 1985 307 c.i.d. engines with 5A heads (casting #3317). This Oldsmobile manifold is a high-rise, dual-plane design with 180-degree firing order engineered for maximum top-end horsepower while maintaining throttle response. Port flange has extra material above the runner for use with cast iron 455 heads and Edelbrock Performer RPM heads #60519. Has clearance for HEI distributor. Carb pad accepts square-bore carbs without adapters.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1976 - Oldsmobile Cutlass Tiara V 8 Cyl 5.7L 350 -
Edelbrock
Qty:
In Stock & Ready to Ship
$567.56
Edelbrock Engine Intake Manifold
  • Non-EGR; Idle-5500rpm; Olds 400-455; For 4 bbl Carbs; Includes Exhaust Crossover Plugs PN[2733];Not Legal For Sale Or Use In California Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
  • MANIFOLD; 1965-76 OLDS 400-455; PERFORMER
  • Performer Olds 455 Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Olds 400-455
    • Number of Carbs: One
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
  • Edelbrock part #2151 Performer Oldsmobile 455 intake manifold is designed for street 400-425-455 c.i.d. applications. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. Includes exhaust crossover plugs #2733 which must be used for marine and off-road use.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1976 - Oldsmobile Cutlass Tiara V 8 Cyl 7.5L 455 7456
Edelbrock
Qty:
In Stock & Ready to Ship
$509.15
Edelbrock Engine Intake Manifold
  • Satin Finish; EGR; Idle-5500rpm; For 4 bbl Carbs; For EGR Use OEM Carburetor Only;Not Legal For Sale Or Use In California Performer/Thunder Series And Carter AFB Carbs Will Not Fit This Manifold~Factory Cruise Control Will Not Clear EGR Valve w/o Linkage Alteration~Recommend FelPro Gasket PN[MS96027] for Manifold Gasket~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
  • MANIFOLD; 1966-85 OLDS 307-403; EGR; Q-JET; PERFORMER
  • Performer Olds 350 Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: With Egr
    • Engine Make/Size: Olds 307-403
    • Number of Carbs: One
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
  • Edelbrock part #3711 Performer Oldsmobile 350 EGR intake manifold is designed for street 307-330-350-403 c.i.d. Oldsmobile V8's, 1964-85. Will fit 1980-1/2 to 1985 307 c.i.d. V8's with 5A heads (casting #3317). This intake manifold comes with a universal pad to fit most carburetors with electric chokes.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1976 - Oldsmobile Cutlass Tiara V 8 Cyl 5.7L 350 -
Edelbrock
Qty:
In Stock & Ready to Ship
$658.01
Edelbrock Engine Intake Manifold
  • Non-EGR;1500-6500rpm; Street/Hi Performance Use; Intake Manifold Only;CARB E.O. D-161-54 Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
  • MANIFOLD; 1968-76 OLDS 455; RPM AIR-GAP
  • RPM Air-Gap Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Olds 455
    • Number of Carbs: One
    • RPM Range: 1500-6500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For Street/Strip Apps In 1500-6500 RPM Range
    • Polish is Hand-Buffed for Brilliant Shine
    • Not Compatible w/EGR Or Spread-Bore Carbs
    • Designed To Match PN[60519] Cylinder Heads
    • Made In The U.S.A. Under High-Quality Standards
  • Edelbrock part #7551 Performer RPM Air-Gap Oldsmobile 455 intake manifold is intended for aggressive street/ strip big-block Oldsmobile applications. Designed to optimize horsepower production from 1500 to 6500 rpm, this manifold will perform best with engines that have an aggressive camshaft profile that will take advantage of the increased flow this manifold can provide. This intake manifold features our popular Air-Gap design that separates the runners from the hot engine oil, resulting in a cooler, denser air charge for more power. This manifold is compatible with stock heads, but has been designed to work with our RPM cylinder heads #60519 for optimal performance. Not compatible with EGR or spread-bore carburetors.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1976 - Oldsmobile Cutlass Tiara V 8 Cyl 7.5L 455 7456
Edelbrock
Qty:
In Stock & Ready to Ship
$529.51
Edelbrock Engine Intake Manifold
  • Non-EGR; For 4 bbl Carb;For EGR Use OEM Carb. Only;Includes Universal Pad; Street/Hi Perf. Use Only;Not Legal For Sale Or Use In California Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
  • MANIFOLD; 1966-85 OLDS 307-403; PERFORMER
  • Performer Olds 350 Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Olds 307-403
    • Number of Carbs: One
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
  • Edelbrock part #2711 Performer Oldsmobile 350 intake manifold is designed for 1964-85, 307-330-350-403 c.i.d. Oldsmobile V8 applications. For non-EGR, the #2711 manifold comes with a universal pad to fit most carburetors with electric chokes. Will fit 1980-1/2 to 1985 307 c.i.d. V8's with 5A heads (casting #3317). Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1976 - Oldsmobile Cutlass Tiara V 8 Cyl 5.7L 350 -
Edelbrock
Engine Intake Manifold Edelbrock

P311-0366011    29087  New

Qty:
In Stock & Ready to Ship
$455.31
Edelbrock Engine Intake Manifold
  • Victor Jr. Series Intake Manifold
  • MANIFOLD; GM LS1; VICTOR JR; CARBURETED; 4150 FLANGE
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block Ls1
    • Number of Carbs: One
    • RPM Range: 3500-7500
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Converts LS1 Engine to Square Bore Carburetor
    • Power Increase From 100-500+ HP
    • Use OEM Factory O-Rings for Intake Gasket
  • Edelbrock part #29087 Victor Jr. LS1 intake manifold is a high-rise single-plane intake capable of supporting up to 600 hp. The Victor Jr. LS1 features a flange that accepts a square-bore carburetors. It can be used on LS2 applications when matched with MSD's #6012 LS2 ignition controller (available through MSD Performance). Includes a throttle bracket designed to work with 700R-4, 200R-4 and Turbo 350 transmissions. Most applications will require hood modification.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-274291F    300-269  New

Qty:
In Stock & Ready to Ship
$470.25
Holley Engine Intake Manifold
  • EFI Intake Manifold
  • EFI Intake Manifold; Single Plane; Fits w/Gen III LS Engines w/LS7 Cylinder Heads; 4150 Flange; Incl Fuel Rails/Hardware/Gaskets; Cast Aluminum; Silver;
  • Product Attributes:
    • Cylinder Head Type: Ls7
    • Engine Make/Size: Gen. Iii Ls1/ls2/ls6
    • Usage: Racing
    • WARNING CA Proposition 65: No
  • Features:
    • 4150 Square Bore Flange
    • Cast Aluminum Construction
  • Single Plane EFI LS Intake Manifold. Fits all GM LS Gen III engines equipped with LS7 cylinder heads. Designed with a 4150 Square bore flange. Optimized runner layout and constant cross sectional area - broad torque curve, best vehicle performance from 2500-7000 RPM Minimum carb flange height - fit in vehicles with minimum hood modifications. Cast aluminum construction - great manifold for centrifugal blower, turbocharged or NOS power adder applications The manifold kit includes the fuel rails, mounting hardware, and o-ring cylinder head mounting flange gaskets.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-1657041    28097  New

Qty:
In Stock & Ready to Ship
$661.77
Edelbrock Engine Intake Manifold
  • Super Victor LS1 Intake Manifold
  • MANIFOLD; GM LS1/LS2; SUPER VICTOR; 4BBL CARB
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block Ls1
    • Number of Carbs: One
    • RPM Range: 3500-8000
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Offers Greater Air Flow Potential
    • Bigger Power Gains
    • Accepted By NASCAR For Grand National Series
    • For Use With Carburetor
  • Edelbrock part #28097 Super Victor LS1 intake manifold offers greater air flow potential for even bigger power gains, this manifold has been accepted by NASCAR for use in the Grand National West/Grand National East series. The carb mount pad is 1.12" taller than the Victor Jr. LS1, and the port exits have been increased to 1.08" x 2.74". Edelbrock offers the optional LS1 Timing Control Module #91238 to drive the stock LS1 Coil-on-Plug ignition system. LS2 applications require MSD's #6012 LS2 ignition controller (available through MSD Performance).

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-2E71029    7524  New

Qty:
In Stock & Ready to Ship
$733.30
Edelbrock Engine Intake Manifold
  • Dual-Quad Intake Manifold
  • MANIFOLD; 1964-71 GEN II HEMI; DUAL-QUAD; PERFORMER RPM
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Mopar 426-572 Hemi
    • Number of Carbs: Two
    • RPM Range: 2500-6500
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Single-Plane Air-Gap Design
    • Dual 4150 Style Carb Pads
    • Compatible With Factory Cylinder Heads
  • Edelbrock part #7524 Dual-Quad HEMI intake manifold is intended for use with Mopar Gen II (1964-71) 426-572 HEMI engines operating in the 2,500 to 6,500+ range. This new intake manifold is a single-plane Air-Gap design with a dual square-bore 4150 style carburetor pad. Carburetor spacing and height are the same as Mopar Performance dual-quad #P5153737, making it a direct bolt-on to all vehicles with a shaker hood. They also retain the same carburetor linkage location from the factory. The Dual-Quad HEMI is compatible with factory style cylinder heads, but optimized for use with Edelbrock Victor Jr. HEMI cylinder heads. Requires Edelbrock Coil Bracket #8079 for use with OE style coils.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-58612EF    29025  New

Qty:
In Stock & Ready to Ship
$597.35
Edelbrock Engine Intake Manifold
  • Victor Jr. Series Intake Manifold
  • MANIFOLD; GM 454-R; VICTOR JR; EFI; RECTANGLE PORT
  • Product Attributes:
    • Cylinder Head Type: Oval Port- Large
    • Emission: Without Egr
    • Engine Make/Size: Chevy Big Block (396-502)
    • Number of Carbs: None; For Fuel Injection
    • RPM Range: 3500-7500
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Race-Winning Design For All Types Of Competition
    • Single-Plane Maximizes Torque And Horsepower
    • Runners Feature Extra Material for Custom Porting
    • For Performance in 3500 to 7500 RPM Range
    • Ideal for 502 cid and Smaller Competition Engines
  • Edelbrock part #29025 Victor Jr. 454-R EFI intake manifold is designed for competition 396-502 big-block Chevy engines with rectangular-port cylinder heads. It features extended runner dividers, smaller plenum chambers and unique runner design for better 60 foot times and max power from 3500 to 7500 rpm. These intake manifolds are especially suited to 502 c.i.d. and smaller competition engines. The Edelbrock Victor Jr. 454-R EFI intake manifold will fit Edelbrock Victor race cylinder heads #77609 and Victor 24 degree #77409, #77459, #77429, #77479 and #77489.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-19192B3    300-256  New

Qty:
In Stock & Ready to Ship
$638.66
Holley Engine Intake Manifold
  • Race Intake Manifold
  • Race Intake Manifold; Single Plane; Split-Design; 4150 Square Bore Flange; 7.32in. Front/Rear Height; 2500-7000 RPM Band; Includes Shoulder Bolt Locators/O-Ring Seals; Satin Finish;
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Gm Ls1/ls2/ls6
    • Flange Type: 4150 Square Bore
    • Front Height: 7.320 In.
    • Fuel System Type: Carb
    • Manifold Type: Single Plane
    • Number of Carbs: One
    • Rear Height: 7.320 In.
    • RPM Range: 2500-7000
    • Usage: Racing
    • WARNING CA Proposition 65: No
  • Features:
    • Maximum Performance Race Design w/Hood Clearance Consideration
    • Lighter Than Other Split Race Intakes
    • Split Feature Making Porting Efforts Easy
    • 1/3 to 1/2 The Price Of Other Split Race Intakes
    • Captured O-Ring Seals At Head Ports and Split
    • Vacuum Port Options Includes (2) 1/8
    • (1) 1/4
    • (1) 3/8 NPT Ports
    • A-B Height - 7.32 in. (0 Deg carb flange angle)
    • Port Size 3.28 in. Height x 1.10 in. Wide
    • Carb Flange - Std 4150 For Up To 1-3/4 in. Diameter Throttle Bores
    • As-Cast Runner Area - 3.5 in. Square at Runner Entry
    • As-Cast Runner Area - Tapered To 2.9 in. Square at Flange Exit
  • The new Holley Single-Plane Race intake manifold were designed with performance in mind. They feature a race bred, two piece split feature that was previously only found on the most expensive race intakes. The manifold will fit GM LS Gen III engines with cathedral port heads and are intended for 4150 style square bore flanged carburetors or throttle body EFI.The LS Race single-plane intake manifold was designed for hi-performance/racing engine applications, 5.3 to 6.2+ liter displacement, and maximum engine speeds of 6000-7000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the RPM spectrum while providing maximum performance up to 7000 rpm.The Holley LS Race manifold incorporates a split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap. With shoulder bolt locators and O-ring seal, reassembly is simple and precise. Technical Data‚· A-B Height - 7.32 in. (0° carb flange angle)ï‚· Port Size- 3.28 in. Height x 1.10 in. Wide‚· Carburetor Flange - Standard 4150 for up to 1-3/4 in. diameter throttle boresï‚· As-Cast Runner Cross-Sectional Area - 3.5 in² at the runner entry tapered to 2.9 in² at the flange exit

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-03558A4    29275  New

Qty:
In Stock & Ready to Ship
$655.90
Edelbrock Engine Intake Manifold
  • Super Victor Series Intake Manifold
  • MANIFOLD; GM BBC RECTANGLE PORT; SUPER VICTOR; EFI
  • Product Attributes:
    • Cylinder Head Type: Rectangular Port
    • Emission: Without Egr
    • Engine Make/Size: Chevy Big Block (396-502)
    • Number of Carbs: None; For Fuel Injection
    • RPM Range: 3500-8500
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For Up To 8000 RPM High-Performance Engines
    • Ideal For 500+ cid Engines
    • Ideal For Big Block Drag Eng. w/High Flow Req.
  • Edelbrock part #29275 Super Victor BBC EFI intake manifold is designed for Chevy big-blocks with rectangular port cylinder heads. It features a single-plane design that is ideal for 500+ cubic-inches or any big-block drag race engine with high air flow requirements. In dyno testing, Super Victor #29275 EFI outperformed the competition out-of-the-box with just a port match and minor blending of critical surfaces.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-061DF34    7116  New

Qty:
In Stock & Ready to Ship
$416.14
Edelbrock Engine Intake Manifold
  • Performer RPM Vortec Intake Manifold
  • MANIFOLD; 1996-02 SB CHEVY VORTEC PERFORMER RPM
  • Product Attributes:
    • Cylinder Head Type: Gm Vortec/edelbrock E-tec
    • Emission: With Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • RPM Range: 1500-6500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Best for the Ultimate in Street High-Performance
    • Bright Silver Chrome Finish That Will Not Discolor
    • Produces Incredible Top-End Horsepower
    • Retains Good Throttle Response and Acceleration
    • Larger Plenum and Runners Maximizes Other Upgrades
    • For 1996+ GM Vortec or Edelbrock E-Tech Heads
    • Accepts Square Bore Carburetors Only
  • Edelbrock part #7116 Performer RPM Vortec intake manifold is Based on the powerful Edelbrock #7101, this single four-barrel intake is designed for the street rod, marine and engine swap market utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. Manifold accepts square-bore carbs only. For street and marine engines operating from 1500-6500 RPM, see the Performer Vortec manifold or Performer Vortec EPS. Will not fit under stock Corvette hood.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-508F9EC    28875  New

Qty:
In Stock & Ready to Ship
$809.46
Edelbrock Engine Intake Manifold
  • Super Victor Intake Manifold
  • MANIFOLD; GM LS7; SUPER VICTOR; EFI; 4150 FLANGE
  • Product Attributes:
    • Cylinder Head Type: Ls7
    • Emission: Without Egr
    • Engine Make/Size: Chevy Ls7
    • Number of Carbs: None; For Fuel Injection
    • RPM Range: 3500-8000
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For 3500 to 7500 RPM High-Performance Engines
    • Ideal For Drag Racing Or Marine Applications
    • Use For Any Application Requiring Maximum Power
  • Edelbrock part #28875 Super Victor LS7 intake manifold is designed for Gen IV LS engines equipped with LS7 cylinder heads or Edelbrock Pro-Port Victor Jr. cylinder heads. This manifold is .75" taller than our LS3 Super Victor intakes. The new Super Victor intake manifold is capable of airflow demands of 750+ hp on naturally aspirated engines. This manifold includes machined fuel injector bosses. A carburetor mounted style throttle bracket is recommended.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-14D8634    28978  New

Qty:
In Stock & Ready to Ship
$845.95
Edelbrock Engine Intake Manifold
  • Super Victor 2 Intake Manifold
  • MANIFOLD; BBC TALL DECK SUPER VICTOR II FOR BRODIX SR20 HEADS
  • Product Attributes:
    • Cylinder Head Type: Rectangular Port
    • Emission: Without Egr
    • Engine Make/Size: Chevy Big Block (396-502)
    • Number of Carbs: One
    • RPM Range: 3500-8500
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For 3500 to 8500 RPM High-Performance Engines
    • Extended Constant Cross-Section of Runners
    • Excellent For Large Displacement Drag Racing Eng.
  • Edelbrock part #28978 Super Victor II intake manifold is designed for use with large cubic inch big-block Chevy Tall-Deck engines using the latest design conventional rectangular port heads. This single-plane intake manifold is ideal for any 1,000+ horsepower drag race engine with high air flow requirements. The Super Victor II intake manifold is machined for use on tall-deck (10.2") blocks with Brodix SR20 cylinder heads with no modifications out of the box. Accepts standard height distributors. All manifolds have an extra large carburetor outer flange with a 5" x 5" opening to fit high flow carburetors and throttle stops.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Intake Manifold Edelbrock

P311-219F702    29085  New

Qty:
In Stock & Ready to Ship
$543.39
Edelbrock Engine Intake Manifold
  • Victor Jr. Series Intake Manifold
  • MANIFOLD; GM LS1; VICTOR JR; EFI; 4150 FLANGE
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block Ls1
    • Number of Carbs: One
    • RPM Range: 3500-7500
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • EFI Manifold Only
    • Throttle Brkt Included for 700R-4/200R-4/Turbo 350
    • Use OEM Factory O-Rings for Intake Gasket
  • Edelbrock part #29085 Victor Jr. LS1 EFI intake manifold accepts a standard square bore throttle body. This compact single-plane intake is capable of supporting up to 650 hp. The Edelbrock Victor Jr. LS1 EFI intake manifold continues the Edelbrock tradition of enhanced engine breathing and balanced cylinder-to-cylinder air/fuel distribution for improved performance. Includes a throttle bracket designed to work with 700-R4, 200-4R and Turbo 350 transmissions. Most applications will require hood modification.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-16CEB10    300-256BK  New

Qty:
In Stock & Ready to Ship
$674.00
Holley Engine Intake Manifold
  • Race Intake Manifold
  • Race Intake Manifold; Single Plane; Split-Design; 4150 Square Bore Flange; 7.32in. Front/Rear Height; 2500-7000 RPM Band; Includes Shoulder Bolt Locators/O-Ring Seals; Black;
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Gm Ls1/ls2/ls6
    • Number of Carbs: One
    • RPM Range: 2500-7000
    • Usage: Racing
    • WARNING CA Proposition 65: No
  • Features:
    • Maximum Performance Race Design w/Hood Clearance Consideration
    • Lighter Than Other Split Race Intakes
    • Split Feature Making Porting Efforts Easy
    • 1/3 to 1/2 The Price Of Other Split Race Intakes
    • Captured O-Ring Seals At Head Ports and Split
    • Vacuum Port Options Includes (2) 1/8
    • (1) 1/4
    • (1) 3/8 NPT Ports
    • A-B Height - 7.32 in. (0 Deg carb flange angle)
    • Port Size 3.28 in. Height x 1.10 in. Wide
    • Carb Flange - Std 4150 For Up To 1-3/4 in. Diameter Throttle Bores
    • As-Cast Runner Area - 3.5 in. Square at Runner Entry
    • As-Cast Runner Area - Tapered To 2.9 in. Square at Flange Exit
  • The new Holley Single-Plane Race intake manifold were designed with performance in mind. They feature a race bred, two piece split feature that was previously only found on the most expensive race intakes. The manifold will fit GM LS Gen III engines with cathedral port heads and are intended for 4150 style square bore flanged carburetors or throttle body EFI.The LS Race single-plane intake manifold was designed for hi-performance/racing engine applications, 5.3 to 6.2+ liter displacement, and maximum engine speeds of 6000-7000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the RPM spectrum while providing maximum performance up to 7000 rpm.The Holley LS Race manifold incorporates a split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap. With shoulder bolt locators and O-ring seal, reassembly is simple and precise. Technical Data‚· A-B Height - 7.32 in. (0° carb flange angle)ï‚· Port Size- 3.28 in. Height x 1.10 in. Wide‚· Carburetor Flange - Standard 4150 for up to 1-3/4 in. diameter throttle boresï‚· As-Cast Runner Cross-Sectional Area - 3.5 in² at the runner entry tapered to 2.9 in² at the flange exit

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-53FD3EE    300-291  New

Qty:
In Stock & Ready to Ship
$638.42
Holley Engine Intake Manifold
  • Race Intake Manifold
  • Race Intake Manifold; Fits w/GM LS III/IV engines w/LS3/L92 Heads; 7.25 in. Front H; 7.25 Rear H; Split Single Plane; Satin Finish; Silver; Cast Construction;
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Ls3/l92
    • Engine Make/Size: Gm Ls3/l92
    • Front Height: 7.250 In.
    • Fuel System Type: Carb
    • Manifold Type: Single Plane
    • Rear Height: 7.250 In.
    • RPM Range: 2500-7000
    • Usage: Racing
    • WARNING CA Proposition 65: No
  • Features:
    • Maximum Performance Race Design With Hood Clearance Consideration
    • Lighter Than Other Split Race Intakes
    • Split Feature Making Porting Efforts Easy
    • 33 To 50 Percent The Price Of Other Split Race Intakes
    • Captured O Ring Seals At Head Ports And Split
    • Black Finish
  • The new Holley Single-Plane Race intake manifold were designed with performance in mind. They feature a race bred, two piece split feature that was previously only found on the most expensive race intakes. The manifold will fit GM LS Gen III engines with LS3/L92 heads and are intended for 4150 style square bore flanged carburetors or throttle body EFI.The LS Race single-plane intake manifold was designed for hi-performance/racing engine applications, 5.3 to 6.2+ liter displacement, and maximum engine speeds of 6000-7000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the RPM spectrum while providing maximum performance up to 7000 rpm.The Holley LS Race manifold incorporates a split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap. With shoulder bolt locators and O-ring seal, reassembly is simple and precise. Technical Data‚· A-B Height - 7.25 in. (0° carb flange angle)ï‚· Port Size- 2.59 in. Height x 1.28 in. Wide‚· Carburetor Flange - Standard 4150 for up to 1-3/4 in. diameter throttle boresï‚· As-Cast Runner Cross-Sectional Area - 4.5 in² at the runner entry tapered to 3.2 in² at the flange exit

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-319A1E5    822241  New

Qty:
In Stock & Ready to Ship
$1,295.00
Holley Engine Intake Manifold
  • EFI Intake Manifold
  • EFI Intake Manifold; Upper; Fits w/LS3/L92 Engines; EV1 Injectors Only; Dual Plenum; 102mm; 12.75 in. Runners; Includes Fuel Rail Kit; Fabricated; Silver;
  • Product Attributes:
    • Cylinder Head Type: Ls3/l92
    • Engine Make/Size: Chevy Ls3/l92
    • Usage: Racing
    • WARNING CA Proposition 65: No
  • Features:
    • Silver Finish Creates High Impact Under-Hood Styling
    • 3mm (1/8) Thick T6061 Sheet Aluminum Construction For Maximum Durability
    • Twin 102mm Throttle Bore Openings For Increased Air Flow
    • 100% Tig Welded For Strength And Durability
    • Includes 3/8 Fuel Rail Kits (Sniper Logo Laser Engraved)
    • Intake Runners With Tapered Top Is Designed To Increase Air Velocity
    • More Evenly Distribute Airflow To All 8 Cylinders Improving Performance And Throttle Response
    • Dual Plenum Design Ideal For Street Max Effort Engines And Boosted Applications
    • Long Intake Runner Lengths (12.75 Inches) Offering Low End Torque And Operating Range Of 1600-6800 Rpm
    • Product Includes All Gaskets And Hardware For A Hassle-Free Installation
    • The Sniper Intake Will Only Accept Ev1 Style Injectors.
  • Holley continues to push the envelope of intake design with its latest offering. The unique look of this intake will surely stand out from the crowd! Our latest release of fabricated Dual Plenum intake manifolds for GM LS1/2/6 and LS3/L92 engines. This unique design of utilizing two plenums solves two common problems experienced with many intakes increased airflow and even dispersion of air to intake ports. The use of one tapered plenum to accommodate one bank of cylinders accomplishes both problems. The entire volume of incoming air is distributed to only four cylinders and the tapered shape of the plenum help increased air velocity directed to each of the intake runner ports. Our dual plenum design features extremely long 12-3/4 in. runners to develop low-end torque making this intake an ideal street intake. These intake are finished in our familiar silver and black anodized finishes for durability and good looks. Our 3/8 in. fuel rail kit include a laser engrave Sniper logo and are capable of supporting 750+ horsepower.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Intake Manifold Holley

P311-4665517    300-226  New

Qty:
In Stock & Ready to Ship
$736.09
Holley Engine Intake Manifold
  • Hi-Ram Lower Intake Manifold
  • Hi-Ram Lower Intake Manifold; Upper; Carbureted Base Only; Includes Fuel Rails; Cast Aluminum; For Use w/LS1/LS2/LS6 Cathedral Port Heads;
  • Product Attributes:
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Gm Ls1/ls2/ls6
    • Fuel System Type: Carb
    • Number of Carbs: One
    • RPM Range: 2500-8500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: No
  • Features:
    • Port Size 2.49in. Height X 1.21in. Wide
    • Standard LS3 Molded O-Ring Mounting Flange Gasket
    • Plenum Top Gasket Type 3/32 in. Round O-Ring Cord
  • The Holley GM LS1/LS2/LS6 Modular Hi-Ram Intake Manifold is introduced as a cost effective alternative to fabricated sheet-metal for high-performance applications where induction system height is not limited. Coupling this Hi-Ram intake with the high flowing LS1/LS2/LS6 style cylinder heads has outstanding potential for N/A and forced induction applications at a budget-minded cost. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! The base is designed to be modular in configuration to accept a wide range of carbureted and EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. Runner length and the tapered cross-section designed to perform well for a wide range of engine configurationsEFI fuel rails are machined for -8AN O-ring Fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. Cast aluminum construction. Intended for use on N/A or forced induction engines in the 6.0 to 7.0+ liter range, max power at 7000-8000+RPM.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle