Shop for Discount Auto Parts, Replacement and Performance Parts and Accessories

1979 Oldsmobile Cutlass Calais Engine Intake Manifold 8 Cyl 5.0L Edelbrock - Performer Series Intake Manifold

Part # P311-296129F Manu # 2101 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $314.56

Satin Finish; Non-EGR; Idle-5500rpm; OEM 4 bbl Or Edelbrock Carb PN[1400];Not Legal For Sale Or Use In California Recommend Edelbrock Gasket PN[7201] for Manifold Gasket~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Or Race Use Or Engine Swaps
MANIFOLD; 1955-86 SB CHEVY; PERFORMER; NON-EGR
Performer Series Intake Manifold
Product Attributes:
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block (262-400)
- Number of Carbs: One
- RPM Range: Idle -5500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts Late-Model Choke
- Water Neck
- And HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes
Edelbrock part #2101 Performer intake manifold is designed for street 1955-86 small-block Chevys. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads.

Brand: Edelbrock

Vehicle	Block	Engine	CID	CC
1979 - Oldsmobile Cutlass Calais	V	8 Cyl 5.0L	305	-

1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Lower 8 Cyl 5.0L Weiand - Street Warrior Intake Manifold

Part # P311-38DBCBA Manu # 8120WND Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $279.24

Street Warrior™ Intake Manifold
Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
Street Warrior™ Intake Manifold; Lower; Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Satin Finish;
Street Warrior(TM) Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block V8
- Fuel System Type: Carb
- Manifold Type: Low Rise
- Number of Carbs: One
- Rear Height: 4.500 In.
- RPM Range: Idle-5500
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- Satin - As Cast - Finish For An Even Surface Texture
- Precision CNC Machining
- Idle-5500 RPM Power Band
- Height Front 3.50 in.
- Rear 4.50 in.
- Port Size 1.84 in. Height x 1.64 in. Width
The Weiand Street Warrior is designed for use on stock or stroker combinations that feature efficient cylinder heads. The latest advances in cam design necessitated the design of a new intake manifold, and the Weiand Street Warrior manifolds fill that void. They are designed with computational fluid dynamics (CFD) software for optimized and consistent flow on every single manifold.

Brand: Weiand

Position: Lower

Vehicle	Position	Block	Engine	CID	CC
1979 - Oldsmobile Cutlass Calais	Lower	V	8 Cyl 5.0L	305	-

1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Lower 8 Cyl 5.0L Weiand - Street Warrior Intake Manifold

Part # P311-38DBCBA Manu # 8120WND Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $279.24

Street Warrior™ Intake Manifold
Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
Street Warrior™ Intake Manifold; Lower; Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Satin Finish;
Street Warrior(TM) Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block V8
- Fuel System Type: Carb
- Manifold Type: Low Rise
- Number of Carbs: One
- Rear Height: 4.500 In.
- RPM Range: Idle-5500
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- Satin - As Cast - Finish For An Even Surface Texture
- Precision CNC Machining
- Idle-5500 RPM Power Band
- Height Front 3.50 in.
- Rear 4.50 in.
- Port Size 1.84 in. Height x 1.64 in. Width
The Weiand Street Warrior is designed for use on stock or stroker combinations that feature efficient cylinder heads. The latest advances in cam design necessitated the design of a new intake manifold, and the Weiand Street Warrior manifolds fill that void. They are designed with computational fluid dynamics (CFD) software for optimized and consistent flow on every single manifold.

Brand: Weiand

Position: Lower

Vehicle	Position	Block	Engine	CID	CC
1979 - Oldsmobile Cutlass Calais	Lower	V	8 Cyl 5.0L	305	-

1980 Oldsmobile Cutlass Calais Engine Intake Manifold - Upper 8 Cyl 5.0L Holley - Sniper EFI Intake Manifold

Part # P311-41DBD94 Manu # 825071 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $651.95

Single Plane; Dual Quad Carbureted; RPM Power Band 1800-7000; Silver w/Sniper Logo;Legal for Racing Use Only
Sniper EFI Intake Manifold; Upper; Single Plane; Dual Quad Carbureted; RPM Power Band 1800-7000; Silver w/Sniper Logo;
Sniper EFI Intake Manifold
Product Attributes:
- Construction: Fabricated
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Small Block Chevy
- Flange/Bore Center to Center: 8.500 In.
- Front Height: 6.771 In.
- Number of Carbs: Two
- Port Size: 1.900 In. X 1.150 In.
- Rear Height: 6.771 In.
- RPM Range: 1800-7000
- Style: Carbureted
- Usage:
  - Racing
  - Street/hi-performance
- Vacuum Port Quantity: None
- WARNING CA Proposition 65: No
Features:
- Budget Friendly Fabricated Intake Manifolds
- 1/8 in. Thick Aluminum More Durable Than Competitive Intakes
- 100% TIG Welded
- Available For EFI And Carbureted Apps w/Custom Holley Sniper Logo
Holley is now offering budget friendly fabricated intake manifolds for LS, Small Block Chevy and Small Block Ford engines in carbureted and EFI versions!

Brand: Holley

Position: Upper

Vehicle	Position	Block	Engine	CID	CC
1980 - Oldsmobile Cutlass Calais	Upper	V	8 Cyl 5.0L	305	-

1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Upper 8 Cyl 5.0L Holley - Single Plane Intake Manifold Kit

Part # P311-5328290 Manu # 300-261 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $414.58

Square Bore Carb Mounting Flange; 2500-7500 RPM; Front 4.18 in./Rear 5.28 in. Height; 1.92 in. H/1.20 in. Wi Port Size;Legal for Non-Emissions Controlled Vehicles Or For Race Use
Single Plane Intake Manifold Kit; Upper; Square Bore Carb Mounting Flange; 2500-7500 RPM; Front 4.18 in./Rear 5.28 in. Height; 1.92 in. H/1.20 in. Wi Port Size;
Single Plane Intake Manifold Kit
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: N/a
- Engine Make/Size: Chevy Small Block V8
- Front Height: 4.180 In.
- Fuel System Type: Carb
- Manifold Type: High Rise
- Number of Carbs: One
- Rear Height: 5.280 In.
- RPM Range: 2500-7500
- Usage: Racing
- WARNING CA Proposition 65: No
Features:
- Single Plane With Isolated Plenum
- Square Bore Carburetor Mounting Flange
- Isolated Water Cross-Over
- Power Band 2500-7500 RPM
The new single plane intake manifold is designed to provide a broad RPM powerband for high-performance street/strip engine applications to a maximum engine speed of 7500 RPM. The carburetor-mounting pad is designed to accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These intake manifolds are designed to accept most stock hardware and accessory brackets, but offer performance features; like an updated plenum divider area, a 1 in. shorter height than the 300-25 manifold, and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. The 300-261 intake manifolds are designed for square-bore carburetor applications on 1957-86 262-400cid Small Block Chevrolet engines and SBC engines equipped with 1987-91 L98 aluminum Corvette cylinder heads (non-EGR applications). Also, these manifolds will work with any SBC engine equipped with aftermarket cylinder heads, as long as they have a standard port flange opening and mounting bolt locations.

Brand: Holley

Position: Upper

Vehicle	Position	Block	Engine	CID	CC
1979 - Oldsmobile Cutlass Calais	Upper	V	8 Cyl 5.0L	305	-

1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Lower 8 Cyl 5.0L Weiand - Street Warrior Intake Manifold

Part # P311-25CF409 Manu # 8120P Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $383.91

Street Warrior™ Intake Manifold
Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Polished Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
Street Warrior™ Intake Manifold; Lower; Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Polished Finish;
Street Warrior(TM) Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block V8
- Fuel System Type: Carb
- Manifold Type: Low Rise
- Number of Carbs: One
- Rear Height: 4.500 In.
- RPM Range: Idle-5500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: No
Features:
- Shiny Hand Polished Finish
- Idle-5500 RPM Power Band
- Height Front 3.50 in.
- Rear 4.50 in.
- Port Size 1.84 in. Height x 1.64 in. Width
- CNC Machined
Street Warrior Intake Manifold non/EGR 262ci-400ci, 1955-1986 Cylinder Heads - Polished Finish

Brand: Weiand

Position: Lower

Vehicle	Position	Block	Engine	CID	CC
1979 - Oldsmobile Cutlass Calais	Lower	V	8 Cyl 5.0L	305	-

1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Lower 8 Cyl 5.0L Weiand - Street Warrior Intake Manifold

Part # P311-25CF409 Manu # 8120P Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $383.91

Street Warrior™ Intake Manifold
Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Polished Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
Street Warrior™ Intake Manifold; Lower; Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Polished Finish;
Street Warrior(TM) Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block V8
- Fuel System Type: Carb
- Manifold Type: Low Rise
- Number of Carbs: One
- Rear Height: 4.500 In.
- RPM Range: Idle-5500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: No
Features:
- Shiny Hand Polished Finish
- Idle-5500 RPM Power Band
- Height Front 3.50 in.
- Rear 4.50 in.
- Port Size 1.84 in. Height x 1.64 in. Width
- CNC Machined
Street Warrior Intake Manifold non/EGR 262ci-400ci, 1955-1986 Cylinder Heads - Polished Finish

Brand: Weiand

Position: Lower

Vehicle	Position	Block	Engine	CID	CC
1979 - Oldsmobile Cutlass Calais	Lower	V	8 Cyl 5.0L	305	-

1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Upper 8 Cyl 5.0L Holley - Sniper EFI Intake Manifold

Part # P311-3C2554D Manu # 825011 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $662.64

Single Plane Carbureted; RPM Power Band 1800-7000; Silver w/Sniper Logo;Legal for Racing Use Only
Sniper EFI Intake Manifold; Upper; Single Plane Carbureted; RPM Power Band 1800-7000; Silver w/Sniper Logo;
Sniper EFI Intake Manifold
Product Attributes:
- Construction: Fabricated
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Small Block Chevy
- Flange: 4150
- Front Height: 6.259 In.
- Number of Carbs: One
- Port Size: 1.900 In. X 1.150 In.
- Rear Height: 6.259 In.
- RPM Range: 1800-7000
- Style: Carbureted
- Usage:
  - Racing
  - Street/hi-performance
- Vacuum Port Quantity: None
- WARNING CA Proposition 65: No
Features:
- Budget Friendly Fabricated Intake Manifolds
- 1/8 in. Thick Aluminum More Durable Than Competitive Intakes
- Available In 92mm And 120mm Bore Throttle Body Openings
- 100% TIG Welded
- Available For EFI And Carbureted Apps w/Custom Holley Sniper Logo
Holley is now offering budget friendly fabricated intake manifolds for LS, Small Block Chevy and Small Block Ford engines in carbureted and EFI versions!

Brand: Holley

Position: Upper

Vehicle	Position	Block	Engine	CID	CC
1979 - Oldsmobile Cutlass Calais	Upper	V	8 Cyl 5.0L	305	-

1982 Oldsmobile Cutlass Calais Engine Intake Manifold 8 Cyl 4.4L Edelbrock - Performer RPM Intake Manifold

Part # P311-3247F26 Manu # 7101 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $310.49

Cast Finish; 4 bbl Carb; 1500-6500rpm; Non-EGR;CARB E.O. D-161-54 Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps
MANIFOLD; 1955-86 SB CHEVY; PERFORMER RPM
Performer RPM Intake Manifold
Product Attributes:
- Cylinder Head Type: Chevy Small Block
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block (262-400)
- Number of Carbs: One
- RPM Range: 1500-6500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
Features:
- Best for the Ultimate in Street High-Performance
- 1958-1965 W-Series 348/409 Big Block Engines
- Dual-Plane High-Rise Intake w/180 Deg. Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
- Edelbrock Total Power Package Maximizes Gains
- For Pre-Pollution Controlled Vehicles Or Engine Swaps
Edelbrock part #7101 Performer RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8's for maximum power and a broad torque curve for high- Performance'street/marine engines. Provides power like a single-plane and throttle response like a dual-plane. Has provisions to machine for an oil fill tube. No provisions for exhaust heated or stock-style choke. Accepts late-model water neck, air-conditioning, alternator and H.E.I. Will fit cast iron Chevrolet Bowtie heads, but will not fit 1987 and later cast iron heads. Intake manifolds will not fit under stock Corvette hood.

Brand: Edelbrock

Vehicle	Block	Engine	CID	CC
1982 - Oldsmobile Cutlass Calais	V	8 Cyl 4.4L	267	-

1979 Oldsmobile Cutlass Calais Engine Intake Manifold 8 Cyl 5.0L Edelbrock - Performer RPM Intake Manifold

Part # P311-3247F26 Manu # 7101 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $310.49

Cast Finish; 4 bbl Carb; 1500-6500rpm; Non-EGR;CARB E.O. D-161-54 Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~For Pre-Pollution Controlled Or Race Use Or Engine Swaps
MANIFOLD; 1955-86 SB CHEVY; PERFORMER RPM
Performer RPM Intake Manifold
Product Attributes:
- Cylinder Head Type: Chevy Small Block
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block (262-400)
- Number of Carbs: One
- RPM Range: 1500-6500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
Features:
- Best for the Ultimate in Street High-Performance
- 1958-1965 W-Series 348/409 Big Block Engines
- Dual-Plane High-Rise Intake w/180 Deg. Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
- Edelbrock Total Power Package Maximizes Gains
- For Pre-Pollution Controlled Vehicles Or Engine Swaps
Edelbrock part #7101 Performer RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8's for maximum power and a broad torque curve for high- Performance'street/marine engines. Provides power like a single-plane and throttle response like a dual-plane. Has provisions to machine for an oil fill tube. No provisions for exhaust heated or stock-style choke. Accepts late-model water neck, air-conditioning, alternator and H.E.I. Will fit cast iron Chevrolet Bowtie heads, but will not fit 1987 and later cast iron heads. Intake manifolds will not fit under stock Corvette hood.

Brand: Edelbrock

Vehicle	Block	Engine	CID	CC
1979 - Oldsmobile Cutlass Calais	V	8 Cyl 5.0L	305	-

1978 Oldsmobile Cutlass Calais Engine Intake Manifold - Lower 8 Cyl 5.0L Weiand - Speed Warrior Intake Manifold

Part # P311-5768F1B Manu # 8501WND Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $414.60

Speed Warrior™ Intake Manifold
Power Band 1500-6700 RPM; High Rise; Square Bore Carb Flange; 4.19 in. Front H/5.27 in. Rear Height; Non-EGR; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Utilizes Late Model Alternator an A/C Bracket Mounting Provisions~Has Additional Vacuum Tap Off~Legal Only For Off-Highway Use Or Racing
Speed Warrior™ Intake Manifold; Lower; Power Band 1500-6700 RPM; High Rise; Square Bore Carb Flange; 4.19 in. Front H/5.27 in. Rear Height; Non-EGR; Satin Finish;
Speed Warrior(TM) Intake Manifold
Product Attributes:
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block V8
- Front Height: 4.190 In.
- Fuel System Type: Carb
- Manifold Type: High Rise
- Number of Carbs: One
- Rear Height: 5.270 In.
- RPM Range: 1500-6700
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- Port Size 1.92 in. Height x 1.16 in. Width
- 1500-6700 RPM Power Band
- Square Bore Carburetor Flange
- Isolated Runners To Reduce Intake Charge Heating
- Promotes Airflow Between Hot Engine/Intake Plenum
- High Rise/Dual Plane Design
- Precision CNC Machining
- Permanent Mold Casting
- Height Front 4.19 in.
- Rear 5.27 in.
Speed Warrior Intake Manifold non/EGR 262ci-400ci, 1955-1986 Cylinder Heads

Brand: Weiand

Position: Lower

Vehicle	Engine Designation	Engine VIN	Position	Block	Engine	CID	CC
1978 - Oldsmobile Cutlass Calais	LG3	U	Lower	V	8 Cyl 5.0L	305	-

1978 Oldsmobile Cutlass Calais Engine Intake Manifold - Lower 8 Cyl 5.0L Weiand - Speed Warrior Intake Manifold

Part # P311-5768F1B Manu # 8501WND Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $414.60

Speed Warrior™ Intake Manifold
Power Band 1500-6700 RPM; High Rise; Square Bore Carb Flange; 4.19 in. Front H/5.27 in. Rear Height; Non-EGR; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Has Additional Vacuum Tap Off~Legal Only For Off-Highway Use Or Racing~Utilizes Late Model Alternator an A/C Bracket Mounting Provisions
Speed Warrior™ Intake Manifold; Lower; Power Band 1500-6700 RPM; High Rise; Square Bore Carb Flange; 4.19 in. Front H/5.27 in. Rear Height; Non-EGR; Satin Finish;
Speed Warrior(TM) Intake Manifold
Product Attributes:
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block V8
- Front Height: 4.190 In.
- Fuel System Type: Carb
- Manifold Type: High Rise
- Number of Carbs: One
- Rear Height: 5.270 In.
- RPM Range: 1500-6700
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- Port Size 1.92 in. Height x 1.16 in. Width
- 1500-6700 RPM Power Band
- Square Bore Carburetor Flange
- Isolated Runners To Reduce Intake Charge Heating
- Promotes Airflow Between Hot Engine/Intake Plenum
- High Rise/Dual Plane Design
- Precision CNC Machining
- Permanent Mold Casting
- Height Front 4.19 in.
- Rear 5.27 in.
Speed Warrior Intake Manifold non/EGR 262ci-400ci, 1955-1986 Cylinder Heads

Brand: Weiand

Position: Lower

Vehicle	Engine Designation	Engine VIN	Position	Block	Engine	CID	CC
1978 - Oldsmobile Cutlass Calais	LG3	U	Lower	V	8 Cyl 5.0L	305	-

1978 Oldsmobile Cutlass Calais Engine Intake Manifold - Upper 8 Cyl 5.0L Weiand - X-CELerator Intake Manifold

Part # P311-369C2A4 Manu # 7547-1 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $305.34

Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
X-CELerator Intake Manifold; Upper; Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;
X-CELerator Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block V8
- Front Height: 3.090 In.
- Fuel System Type: Carb
- Manifold Type: High Rise
- Number of Carbs: One
- Rear Height: 4.060 In.
- RPM Range: 2500-7000
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- Single Plane Design
- Square Flange Carburetor Mounting
- IMCalifornia Approved
- Power Band 2500-7000 RPM
- Height 3.09 in. Front
- 4.06 in. Rear
- Port Size 1.85 in. Height x 1.15 in. Width
- No Provision For Divorced Or Hot Air Choke
This Weiand X-CELerator manifold was specifically designed with the IMCalifornia racer in mind. It is fully legal for use in IMCalifornia Stock Car and Sportmod Competition! This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.

Brand: Weiand

Position: Upper

Vehicle	Engine Designation	Engine VIN	Position	Block	Engine	CID	CC
1978 - Oldsmobile Cutlass Calais	LG3	U	Upper	V	8 Cyl 5.0L	305	-

1980 Oldsmobile Cutlass Calais Engine Intake Manifold - Upper 8 Cyl 5.0L Weiand - X-CELerator Intake Manifold

Part # P311-369C2A4 Manu # 7547-1 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $305.34

Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
X-CELerator Intake Manifold; Upper; Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;
X-CELerator Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block V8
- Front Height: 3.090 In.
- Fuel System Type: Carb
- Manifold Type: High Rise
- Number of Carbs: One
- Rear Height: 4.060 In.
- RPM Range: 2500-7000
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- Single Plane Design
- Square Flange Carburetor Mounting
- IMCalifornia Approved
- Power Band 2500-7000 RPM
- Height 3.09 in. Front
- 4.06 in. Rear
- Port Size 1.85 in. Height x 1.15 in. Width
- No Provision For Divorced Or Hot Air Choke
This Weiand X-CELerator manifold was specifically designed with the IMCalifornia racer in mind. It is fully legal for use in IMCalifornia Stock Car and Sportmod Competition! This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.

Brand: Weiand

Position: Upper

Vehicle	Position	Block	Engine	CID	CC
1980 - Oldsmobile Cutlass Calais	Upper	V	8 Cyl 5.0L	305	-

1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Upper 8 Cyl 5.0L Holley - Strip Dominator Intake Manifold

Part # P311-1D7CA18 Manu # 300-25 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $383.40

Carbureted; Single Plane; Front Height 5.11 in./Rear Height 5.97 in.; High Rise; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use RPM Power Band 4500-7600
Strip Dominator Intake Manifold; Upper; Carbureted; Single Plane; Front Height 5.11 in./Rear Height 5.97 in.; High Rise; Satin Finish;
Strip Dominator Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block V8
- Front Height: 5.110 In.
- Fuel System Type: Carb
- Manifold Type: High Rise
- Number of Carbs: One
- Rear Height: 5.970 In.
- RPM Range: 4500-7600
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- Single Plane With Isolated Plenum
- Square Bore Carburetor Mounting Flange
- Isolated Water Cross-Over
- Power Band 4500-7600 rpm
- Height Front 5.11 in. Rear 5.97 in.
- Port Size 2.05 in. Height 1.22 in. Width
Strip Dominator Intake Manifold 1957-1986 262ci-400ci, 1987-later with Aluminum Heads

Brand: Holley

Position: Upper

Vehicle	Position	Block	Engine	CID	CC
1979 - Oldsmobile Cutlass Calais	Upper	V	8 Cyl 5.0L	305	-

1980 Oldsmobile Cutlass Calais Engine Intake Manifold 8 Cyl 5.7L Edelbrock - Performer RPM Olds 350 Intake Manifold

Part # P311-44C0C38 Manu # 7111 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $513.32

Non-EGR; 1500-6500rpm; For 4 bbl Carbs;CARB E.O. D-161-54 Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles
MANIFOLD; 1964-85 OLDS 307-403; PERFORMER
Performer RPM Olds 350 Intake Manifold
Product Attributes:
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Olds 307-403
- Number of Carbs: One
- RPM Range: 1500-6500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
Features:
- Best for the Ultimate in Street High-Performance
- Designed for Idle to 5500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 Deg. Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
- Edelbrock Total Power Package Maximizes Gains
Edelbrock part #7111 Performer RPM Oldsmobile 350 intake manifold is designed for 330-350-403 c.i.d. Oldsmobile's and 1980-1/2 to 1985 307 c.i.d. engines with 5A heads (casting #3317). This Oldsmobile manifold is a high-rise, dual-plane design with 180-degree firing order engineered for maximum top-end horsepower while maintaining throttle response. Port flange has extra material above the runner for use with cast iron 455 heads and Edelbrock Performer RPM heads #60519. Has clearance for HEI distributor. Carb pad accepts square-bore carbs without adapters.

Brand: Edelbrock

Vehicle	Block	Engine	CID	CC
1980 - Oldsmobile Cutlass Calais	V	8 Cyl 5.7L	350	-

1984 Oldsmobile Cutlass Calais Engine Intake Manifold - Upper 8 Cyl 5.0L Holley - EFI Intake Manifold and Fuel Rail Kit

Part # P311-3A4F4E0 Manu # 300-260 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $591.99

Single Plane; For Use w/4150 Style Throttle Body; 4.18 in. Front H/5.28 in. Rear H; 2500-7500 RPM Power Band; Satin;Legal for Non-Emissions Controlled Vehicles Or For Race Use
EFI Intake Manifold and Fuel Rail Kit; Upper; Single Plane; For Use w/4150 Style Throttle Body; 4.18 in. Front H/5.28 in. Rear H; 2500-7500 RPM Power Band; Satin;
EFI Intake Manifold and Fuel Rail Kit
Product Attributes:
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: N/a
- Engine Make/Size: Chevy Small Block V8
- Front Height: 4.180 In.
- Fuel System Type: Efi
- Manifold Type: High Rise
- Number of Carbs: One
- Rear Height: 5.280 In.
- RPM Range: 2500-7500
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- Single Plane Design With Isolated Plenum
- 4150 Square Bore Mounting Flange
- 2500-7500 RPM Power Band
- Front 4.18 in. / Rear 5.28 in. Height
- 1.92 in. Height / 120 in. Width Port Size
- Lower Throttle Body Mounting Height To Help w/Hood Clearance
- Holley Laser Etched Logos On Black Coated Fuel Rails
- Bracket Asst. Includes So You Can Install Injectors Of Your Choice
- Fuel Injectors Are Not Included
- Fuel Rail Designed For Max Throttle Lever Clearance
The new single plane EFI intake manifold is designed to provide a broad RPM powerband for high-performance street/strip engine applications to a maximum engine speed of 7500 RPM. The manifold is designed to work with 4150 Style Throttle body EFI systems like the Holley 4150 style flange Universal Throttle Bodies. These intake manifolds are designed to accept most stock hardware and accessory brackets, but offer performance features; like an updated plenum divider area, a 1 in. shorter overall height than most single plane manifolds, and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. The fuel injector bores have back-cut exits in the runners for better fuel atomization. This design points the injectors at an angle to match the intake runner airflow angle. The black coated fuel rails and rail bracket assortment are included with the manifold for any easy installation with the injectors that you choose to use for your combination. Fuel rail designed for maximum throttle lever clearance.(Injectors are not included)The 300-260 intake manifolds are designed 4150 style Throttle Body EFI applications on 1957-86 262-400cid Small Block Chevrolet engines and SBC engines equipped with 1987-91 L98 aluminum Corvette cylinder heads (non-EGR applications). Also, these manifolds will work with any SBC engine equipped with aftermarket cylinder heads, as long as they have a standard port flange opening and mounting bolt locations. Also Available: 20-86 Throttle Cable Bracket, 20-87 Kickdown Cable Bracket

Brand: Holley

Position: Upper

Vehicle	Position	Block	Engine	CID	CC
1984 - Oldsmobile Cutlass Calais	Upper	V	8 Cyl 5.0L	305	-

1979 Oldsmobile Cutlass Calais Engine Intake Manifold 8 Cyl 5.0L Edelbrock - Performer EPS Intake Manifold

Part # P311-1FDAC31 Manu # 27013 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $399.35

Black; Idle-5500 rpm; Non-EGR; Dual-Plane;Not Legal For Sale Or Use In California Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Or Race Use Or Engine Swaps
MANIFOLD; 1955-86 SBC 265-400; EPS; BLACK
Performer EPS Intake Manifold
Product Attributes:
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block (262-400)
- Number of Carbs: One
- RPM Range: Idle -5500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Maximizes Performance with Edelbrock Carburetors
- Runner Design Tuned For Peak Torque
- Maximizes Peak Torque Around 3500 RPM
- Excellent Throttle Response and Mid-Range Power
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg. Firing Order
- Prod. +5 HP and +9 ft./lbs. of Torque Over PN[2101]
Edelbrock part #27013 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Edelbrock Performer EPS intake manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the power increases averaged 5+ ft-lbs. of torque for more performance where you need it most. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.

Brand: Edelbrock

Vehicle	Block	Engine	CID	CC
1979 - Oldsmobile Cutlass Calais	V	8 Cyl 5.0L	305	-

1982 Oldsmobile Cutlass Calais Engine Intake Manifold 8 Cyl 4.4L Edelbrock - RPM Air-Gap Intake Manifold

Part # P311-3AE176F Manu # 7501 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $397.17

Cast Finish; 4 bbl Carb; 1500-6500rpm; Non-EGR; For Square-Bore Carbs; Street/Hi Perf. Use Only;CARB E.O. D-161-54 Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps
MANIFOLD; 1955-86 SB CHEVY; RPM AIR-GAP; NON-EGR
RPM Air-Gap Intake Manifold
Product Attributes:
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block (262-400)
- Number of Carbs: One
- RPM Range: 1500-6500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Based on Performer RPM-Series with Unique Air Gap
- Bright Silver Chrome Finish That Will Not Discolor
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake
- For Square Bore Carburetors Only
Edelbrock part #7501 RPM Air-Gap #7501 intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8 applications. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that's used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

Brand: Edelbrock

Vehicle	Block	Engine	CID	CC
1982 - Oldsmobile Cutlass Calais	V	8 Cyl 4.4L	267	-

1979 Oldsmobile Cutlass Calais Engine Intake Manifold 8 Cyl 5.0L Edelbrock - RPM Air-Gap Intake Manifold

Part # P311-3AE176F Manu # 7501 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $397.17

Cast Finish; 4 bbl Carb; 1500-6500rpm; Non-EGR; For Square-Bore Carbs; Street/Hi Perf. Use Only;CARB E.O. D-161-54 Recommend Edelbrock Gasket PN[7201] for Manifold Gasket~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~For Pre-Pollution Controlled Or Race Use Or Engine Swaps
MANIFOLD; 1955-86 SB CHEVY; RPM AIR-GAP; NON-EGR
RPM Air-Gap Intake Manifold
Product Attributes:
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chevy Small Block (262-400)
- Number of Carbs: One
- RPM Range: 1500-6500
- Usage: Street/hi-performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Based on Performer RPM-Series with Unique Air Gap
- Bright Silver Chrome Finish That Will Not Discolor
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake
- For Square Bore Carburetors Only
Edelbrock part #7501 RPM Air-Gap #7501 intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8 applications. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that's used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

Brand: Edelbrock

Vehicle	Block	Engine	CID	CC
1979 - Oldsmobile Cutlass Calais	V	8 Cyl 5.0L	305	-

Finish Selecting Your Vehicle to Shop For Your Intake Manifold

Shop By Brand

Shop By Related Engine Intake Manifold Parts

Shop for Top Selling Genuine Oldsmobile Cutlass Calais Intake Manifolds

Shop Oldsmobile Cutlass Calais Intake Manifolds

Finish Selecting Your Vehicle to Shop For Your Intake Manifold

Shop By Brand

Shop By Related Engine Intake Manifold Parts

Shop for Top Selling Genuine Oldsmobile Cutlass Calais Intake Manifolds