Shop Volvo 850 Head Gaskets

Choose Vehicle Year

Finish Selecting Your Vehicle to Shop For Your Head Gasket

Choose a Year for your Volvo 850 's Head Gasket

  • 1997
  • 1996
  • 1995
  • 1994
  • 1993

Shop By Brand

The Following brands are available based on your search.

  • Cometic Gasket
    Cometic Gasket
  • Elring
    Elring
  • FelPro
    FelPro
  • Ford Racing
    Ford Racing
  • Reinz
    Reinz
  • Sce Gaskets
    Sce Gaskets
  • Victor Reinz
    Victor Reinz

Shop By Related Engine Cylinder Head Gasket Parts

Shop below for all Engine Cylinder Head Gasket related parts for your Volvo 850

Engine Cylinder Head Bolt Set
Engine Cylinder Head Bolt Set
Engine Cylinder Head Gasket
Engine Cylinder Head Gasket
Engine Cylinder Head Gasket Set
Engine Cylinder Head Gasket Set

Shop for Top Selling Genuine Volvo 850 Head Gaskets

  • We Stock the following top leading brands, including Victor Reinz, FelPro, Reinz, Elring, Ford Racing, Cometic Gasket
  • Constantly Updated Inventory of Volvo 850 Replacement Head Gasket Parts

We also have Head Gasket parts for other Volvo models, including C30, C70, S40, S60, S70, S80, S90, V40, V50, V70, V90, XC70, XC90, 240, 242, 244, 245, 740, 760, 850, 940, 960, 1800.


Victor Reinz
1997 Volvo 850 Engine Cylinder Head Gasket Victor Reinz

P311-29B86A5    W0133-1628799  New

Qty:
In Stock & Ready to Ship
$54.93
Victor Reinz Engine Cylinder Head Gasket
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Victor Reinz
Additional Fitment Information:
Vehicle Aspiration
1997 - Volvo 850 Naturally Aspirated
Victor Reinz
1997 Volvo 850 Engine Cylinder Head Gasket 5 Cyl 2.4L Victor Reinz

P311-5D49499    W0133-1628751  New

Qty:
In Stock & Ready to Ship
$41.09
Victor Reinz Engine Cylinder Head Gasket
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Victor Reinz
Additional Fitment Information:
Vehicle Aspiration Block Engine CID CC
1997 - Volvo 850 Turbocharged L 5 Cyl 2.4L - 2435
FelPro
1995 Volvo 850 Engine Cylinder Head Gasket 5 Cyl 2.3L FelPro

P311-163D306    26204 PT  New

200702 , 9135513 , HG36130

Qty:
In Stock & Ready to Ship
$45.46
  • Head Gasket
  • Head Bolts Not Included Head Bolt Replacement Recommended OE Number 9135513 ; PermaTorque
  • FEL-PRO 26204 PT Head Gasket
  • Product Attributes:
    • Head Gasket Bore: 3.265"
    • Head Gasket Manufactured Thickness: .0580"
    • Part Material: Permatorque
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Brand: FelPro
Additional Fitment Information:
Vehicle Block Engine CID CC
1995 - Volvo 850 L 5 Cyl 2.3L - 2319
Reinz
1995 Volvo 850 Engine Cylinder Head Gasket Reinz

P311-2765ECD    61 33435 00  New

Qty:
In Stock & Ready to Ship
$26.66
Reinz Engine Cylinder Head Gasket
Brand: Reinz
Additional Fitment Information:
Vehicle Aspiration
1995 - Volvo 850 Turbocharged
Reinz
1993 Volvo 850 Engine Cylinder Head Gasket Reinz

P311-2429147    61-33440-00  New

26203PT , 54570 , HG10149

Qty:
In Stock & Ready to Ship
$31.37
Reinz Engine Cylinder Head Gasket
  • Engine Cylinder Head Gasket
  • Requires Replacement without Cylinder Head Bolts
  • Product Attributes:
    • 19: 0.059
    • California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
    • Complete: Y
    • Configuration: One Piece
    • Contains Applications: Y
    • Cylinder Bore Diameter (IN): 3.327
    • Features: Engine_cylinder_head_gasket.html
    • Gasket Sealant Included: N
    • Grade Type: Regular
    • Release Wave: 04/30/2018
  • For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.
Brand: Reinz
Additional Fitment Information:
Vehicle
1993 - Volvo 850
Reinz
1997 Volvo 850 Engine Cylinder Head Gasket 5 Cyl 2.3L Reinz

P311-5F36F8D    61-33435-00  New

26204PT , 54567 , HG10121

Qty:
In Stock & Ready to Ship
$26.66
Reinz Engine Cylinder Head Gasket
  • Engine Cylinder Head Gasket
  • Requires Replacement Standard Design without Cylinder Head Bolts
  • Product Attributes:
    • 19: 0.059
    • California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
    • Complete: Y
    • Configuration: One Piece
    • Contains Applications: Y
    • Cylinder Bore Diameter (IN): 3.268
    • Features: Engine_cylinder_head_gasket.html
    • Gasket Sealant Included: N
    • Grade Type: Regular
    • Release Wave: 04/30/2018
  • For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.
Brand: Reinz
Additional Fitment Information:
Vehicle Block Engine CID CC
1997 - Volvo 850 L 5 Cyl 2.3L - 2319
Elring
1995 Volvo 850 Engine Cylinder Head Gasket 5 Cyl 2.4L Elring

P311-4651D24    135.160  New

0055551 , 10105200 , 26203PT , 3 531 017-6 , 30-027344-20 , 30-027344-30 , 414889P , 54570 , 61-33440-00 , 80092 , 80116 , BY 360 , BY361 , H80116-00

Qty:
In Stock & Ready to Ship
$29.01
  • Gasket, cylinder head
  • Diameter: 84.5mm
  • Product Attributes:
    • Additionally required articles (article numbers): 221.490
    • Gasket Design: Fibre Composite
Brand: Elring
Additional Fitment Information:
Vehicle Block Engine CID CC
1995 - Volvo 850 L 5 Cyl 2.4L - 2435
Ford Racing
Engine Cylinder Head Gasket Ford Racing

P311-29BDF33    M-6051-B341  New

Qty:
In Stock & Ready to Ship
$122.15
Ford Racing Engine Cylinder Head Gasket
  • Cylinder Head Gaskets
  • Cylinder Head Gaskets; Race Quality Gasket; Designed For Big Bore 351 Blocks; Left/Right Hand Gaskets; .040 in. Compressed Thickness;
  • Product Attributes:
    • Engine Make/Size: Ford Small Block
    • WARNING CA Proposition 65: No
  • Features:
    • 4.125 in. Overbore Competition Gasket
    • Bore Flange Valve Pockets Have Been Added
    • 4.125 in. Bore Diameter
    • 4.160 in. Gasket Diameter
    • 0.040 in. Compressed Thickness
    • 9.1cc Compressed Volume
    • Made in the USA
  • Ford Racing performance cylinder head gaskets minimize blowout and have a wire-ring combustion seat for extra sealing around combustion chambers. Ford Racing performance cylinder head gaskets are available with either steel-core laminate construction for cast iron heads, or graphite cores with a pre-flattened steel-wire ring, so they won't brinell aluminum heads.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Ford Racing
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-229830C    C5639-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.530in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-046971A    C5641-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.600in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-359489E    C5744-060  New

Qty:
In Stock & Ready to Ship
$172.35
Cometic Gasket Engine Cylinder Head Gasket
  • Ford 460 Pro Stock V8 Cylinder Head Gasket
  • Ford 460 Pro Stock V8 .060in. MLS Cylinder Head Gasket; 4.685in. Bore; A460 Block
  • Product Attributes:
    • Engine Make/Size: Ford 460 Prostock V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.060". Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-4508F34    C5581-040  New

Qty:
In Stock & Ready to Ship
$111.45
Cometic Gasket Engine Cylinder Head Gasket
  • Chrysler R3 Race Block Cylinder Head Gasket
  • Chrysler R3 Race Block .040in. MLS Cylinder Head Gasket; 4.165in. Bore; W7;W8;W9 Heads
  • Product Attributes:
    • Engine Make/Size: Chrysler/dodge R3 Iron Nascar«/late Model V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Thickness is 0.040". W7-W8-W9 Heads. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-266EF3A    C5640-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.580in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-41B76FA    C5582-040  New

Qty:
In Stock & Ready to Ship
$113.10
Cometic Gasket Engine Cylinder Head Gasket
  • Chrysler R3 Race Block Cylinder Head Gasket
  • Chrysler R3 Race Block .040in. MLS Cylinder Head Gasket; 4.185in. Bore; W7;W8;W9 Heads
  • Product Attributes:
    • Engine Make/Size: Chrysler/dodge R3 Iron Nascar«/late Model V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Thickness is 0.040". W7-W8-W9 Heads. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-3DDC904    C15363-060  New

Qty:
In Stock & Ready to Ship
$145.42
Cometic Gasket Engine Cylinder Head Gasket
  • GM Dart LS Next V8 Cylinder Head Gasket
  • GM Dart LS Next V8 .060in. MLX Cylinder Head Gasket; 4.200in. Bore; LHS; 1/2in./3/8in. Stud Hole Combination
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Cylinder Head Gasket
    • Asbestos-Free Fiber Material
  • The HP shim technology increases clampload around the combustion chamber, thereby increasing the sealability of the head gasket around the open deck block.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-55B920F    C5579-040  New

Qty:
In Stock & Ready to Ship
$111.50
Cometic Gasket Engine Cylinder Head Gasket
  • Chrysler R3 Race Block Cylinder Head Gasket
  • Chrysler R3 Race Block .040in. MLS Cylinder Head Gasket; 4.060in. Bore; W7;W8;W9 Heads
  • Product Attributes:
    • Engine Make/Size: Chrysler/dodge R3 Iron Nascar«/late Model V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Thickness is 0.040". W7-W8-W9 Heads. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-4982746    1156-2  New

Qty:
In Stock & Ready to Ship
$67.35
  • Head Gasket
  • FEL-PRO 1156-2 Head Gasket
  • Product Attributes:
    • Application Notes: Svo Block W/windsor Heads - Round Bore - No Valve Pockets
    • Bore Size (in.): 4.100
    • Combustion Chamber Volume (cc): 8.50
    • Combustion Seal Design: Pre-flattened Copper Wire
    • Engine Displacement: 302, 351w Windsor
    • Engine Family: Ford V8 Windsor Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: No Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-295352A    C15362-060  New

Qty:
In Stock & Ready to Ship
$145.42
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Dart LS Next Block V8 Cylinder Head Gasket
  • GM/Dart LS Next Block V8 .060in. MLX Cylinder Head Gasket; 4.200in. Bore; RHS; 1/2in./3/8in. Stud Hole Combination
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Cylinder Head Gasket
    • Asbestos-Free Fiber Material
  • The HP shim technology increases clampload around the combustion chamber, thereby increasing the sealability of the head gasket around the open deck block.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-1EC80FE    C5641-060  New

Qty:
In Stock & Ready to Ship
$135.70
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .060in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.600in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.060". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-2EAC8FF    C5639-040  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .040in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.530in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.040". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle