Finish Selecting Your Vehicle to Shop For Your Head Gasket

Choose a Year for your Mercedes-Benz 300SE 's Head Gasket

  • 1993
  • 1992
  • 1991
  • 1990
  • 1989
  • 1988

Shop By Brand

The Following brands are available based on your search.

  • Cometic Gasket
    Cometic Gasket
  • Elring
    Elring
  • FelPro
    FelPro
  • Ford Racing
    Ford Racing
  • Sce Gaskets
    Sce Gaskets
  • Victor Reinz
    Victor Reinz

Shop By Related Engine Cylinder Head Gasket Parts

Shop below for all Engine Cylinder Head Gasket related parts for your Mercedes-Benz 300SE


Shop for Top Selling Genuine Mercedes Benz 300se Head Gaskets

  • We Stock the following top leading brands, including Elring, Victor Reinz, Ford Racing, Cometic Gasket, FelPro
  • Constantly Updated Inventory of Mercedes Benz 300se Replacement Head Gasket Parts

Elring
1993 Mercedes-Benz 300SE Engine Cylinder Head Gasket Elring

P311-14FB484    W0133-1618016  New

Qty:
In Stock & Ready to Ship
$56.81
Elring Engine Cylinder Head Gasket
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Elring
Additional Fitment Information:
Vehicle
1993 - Mercedes-Benz 300SE
Victor Reinz
1993 Mercedes-Benz 300SE Engine Cylinder Head Gasket Victor Reinz

P311-48889F4    W0133-1618016  New

Qty:
In Stock & Ready to Ship
$68.98
Victor Reinz Engine Cylinder Head Gasket
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Victor Reinz
Additional Fitment Information:
Vehicle
1993 - Mercedes-Benz 300SE
Elring
1989 Mercedes-Benz 300SE Engine Cylinder Head Gasket Elring

P311-2D683AC    W0133-1623630  New

Qty:
In Stock & Ready to Ship
$36.40
Elring Engine Cylinder Head Gasket
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Elring
Additional Fitment Information:
Vehicle
1989 - Mercedes-Benz 300SE
Elring
1989 Mercedes-Benz 300SE Engine Cylinder Head Gasket 6 Cyl 3.0L Elring

P311-1A10733    764.746  New

0022054 , 026190 , 10009900 , 103 016 19 20 , 103 016 21 20 , 30-026903-00 , 414871P , 50096 , 54710 , 61-26840-20 , 61-26840-30 , BN 740 , BN740 , BN741 , H50096-00

Qty:
In Stock & Ready to Ship
$27.38
  • Gasket, cylinder head
  • Diameter: 90.2mm
  • Product Attributes:
    • Additionally required articles (article numbers): 819.965
    • Gasket Design: Fibre Composite
Brand: Elring
Additional Fitment Information:
Vehicle Block Engine CID CC
1989 - Mercedes-Benz 300SE L 6 Cyl 3.0L - 2962
Elring
1993 Mercedes-Benz 300SE Engine Cylinder Head Gasket 6 Cyl 3.2L Elring

P311-04963CE    044.581  New

10093700 , 104 016 17 20 , 104 016 22 20 , 104 016 23 20 , 104 016 24 20 , 104 016 25 20 , 104 016 28 20 , 1040162320 , 1620163220 , 1620163420 , 30-027091-00 , 30-027354-30 , 414868 , 414868P , 50249 , 54683 , 60-28975-20 , 61-28975-10 , 61-28975-20 , 61-28975-30 , A 104 016 28 20 , AE5330 , BV 840 , H50249-00

Qty:
In Stock & Ready to Ship
$39.29
  • Gasket, cylinder head
  • Thickness: 1.74mm Diameter: 90.9mm
  • Product Attributes:
    • Additionally required articles (article numbers): 759.640
    • Gasket Design: Fibre Composite
    • Installed Thickness [Mm]: 1,65
Brand: Elring
Additional Fitment Information:
Vehicle Block Engine CID CC
1993 - Mercedes-Benz 300SE L 6 Cyl 3.2L - 3199
Ford Racing
Engine Cylinder Head Gasket Ford Racing

P311-29BDF33    M-6051-B341  New

Qty:
In Stock & Ready to Ship
$122.15
Ford Racing Engine Cylinder Head Gasket
  • Cylinder Head Gaskets
  • Cylinder Head Gaskets; Race Quality Gasket; Designed For Big Bore 351 Blocks; Left/Right Hand Gaskets; .040 in. Compressed Thickness;
  • Product Attributes:
    • Engine Make/Size: Ford Small Block
    • WARNING CA Proposition 65: No
  • Features:
    • 4.125 in. Overbore Competition Gasket
    • Bore Flange Valve Pockets Have Been Added
    • 4.125 in. Bore Diameter
    • 4.160 in. Gasket Diameter
    • 0.040 in. Compressed Thickness
    • 9.1cc Compressed Volume
    • Made in the USA
  • Ford Racing performance cylinder head gaskets minimize blowout and have a wire-ring combustion seat for extra sealing around combustion chambers. Ford Racing performance cylinder head gaskets are available with either steel-core laminate construction for cast iron heads, or graphite cores with a pre-flattened steel-wire ring, so they won't brinell aluminum heads.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Ford Racing
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-046971A    C5641-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.600in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-229830C    C5639-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.530in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-4508F34    C5581-040  New

Qty:
In Stock & Ready to Ship
$111.45
Cometic Gasket Engine Cylinder Head Gasket
  • Chrysler R3 Race Block Cylinder Head Gasket
  • Chrysler R3 Race Block .040in. MLS Cylinder Head Gasket; 4.165in. Bore; W7;W8;W9 Heads
  • Product Attributes:
    • Engine Make/Size: Chrysler/dodge R3 Iron Nascar«/late Model V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Thickness is 0.040". W7-W8-W9 Heads. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-1EC80FE    C5641-060  New

Qty:
In Stock & Ready to Ship
$135.70
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .060in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.600in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.060". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-3DDC904    C15363-060  New

Qty:
In Stock & Ready to Ship
$145.42
Cometic Gasket Engine Cylinder Head Gasket
  • GM Dart LS Next V8 Cylinder Head Gasket
  • GM Dart LS Next V8 .060in. MLX Cylinder Head Gasket; 4.200in. Bore; LHS; 1/2in./3/8in. Stud Hole Combination
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Cylinder Head Gasket
    • Asbestos-Free Fiber Material
  • The HP shim technology increases clampload around the combustion chamber, thereby increasing the sealability of the head gasket around the open deck block.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-295352A    C15362-060  New

Qty:
In Stock & Ready to Ship
$145.42
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Dart LS Next Block V8 Cylinder Head Gasket
  • GM/Dart LS Next Block V8 .060in. MLX Cylinder Head Gasket; 4.200in. Bore; RHS; 1/2in./3/8in. Stud Hole Combination
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Cylinder Head Gasket
    • Asbestos-Free Fiber Material
  • The HP shim technology increases clampload around the combustion chamber, thereby increasing the sealability of the head gasket around the open deck block.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-2EAC8FF    C5639-040  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .040in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.530in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.040". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-55B920F    C5579-040  New

Qty:
In Stock & Ready to Ship
$111.50
Cometic Gasket Engine Cylinder Head Gasket
  • Chrysler R3 Race Block Cylinder Head Gasket
  • Chrysler R3 Race Block .040in. MLS Cylinder Head Gasket; 4.060in. Bore; W7;W8;W9 Heads
  • Product Attributes:
    • Engine Make/Size: Chrysler/dodge R3 Iron Nascar«/late Model V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Thickness is 0.040". W7-W8-W9 Heads. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-266EF3A    C5640-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.580in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-41B76FA    C5582-040  New

Qty:
In Stock & Ready to Ship
$113.10
Cometic Gasket Engine Cylinder Head Gasket
  • Chrysler R3 Race Block Cylinder Head Gasket
  • Chrysler R3 Race Block .040in. MLS Cylinder Head Gasket; 4.185in. Bore; W7;W8;W9 Heads
  • Product Attributes:
    • Engine Make/Size: Chrysler/dodge R3 Iron Nascar«/late Model V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Thickness is 0.040". W7-W8-W9 Heads. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
FelPro
Engine Cylinder Head Gasket FelPro

P311-4982746    1156-2  New

Qty:
In Stock & Ready to Ship
$67.35
  • Head Gasket
  • FEL-PRO 1156-2 Head Gasket
  • Product Attributes:
    • Application Notes: Svo Block W/windsor Heads - Round Bore - No Valve Pockets
    • Bore Size (in.): 4.100
    • Combustion Chamber Volume (cc): 8.50
    • Combustion Seal Design: Pre-flattened Copper Wire
    • Engine Displacement: 302, 351w Windsor
    • Engine Family: Ford V8 Windsor Small Block
    • Materials/Construction: Steel Core Laminate
    • Mfg.: Ford Performance
    • Product Notes: No Brinelling Of Aluminum Heads
    • Thickness (in.): 0.039
  • Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FelPro
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-246AE48    C5637-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV/V/VI Cylinder Head Gasket
  • GM/Mercury Marine Big Block V8 Gen-IV/V/VI .051in. MLS Cylinder Head Gasket; W/4 Bolts in Lifter Valley; 4.600in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv/v/iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 4 Bolts in Valley. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-15206EB    C5075-040  New

Qty:
In Stock & Ready to Ship
$145.42
  • GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
  • GM LSX Gen-4 Small Block V8 .040in. MLX Cylinder Head Gasket; 4.100in. Bore; RHS
  • Product Attributes:
    • Engine Make/Size: Gm Lsx Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Cylinder Head Gasket
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-3E906F3    C5466-040  New

Qty:
In Stock & Ready to Ship
$111.45
Cometic Gasket Engine Cylinder Head Gasket
  • Chrysler R3 Race Block Cylinder Head Gasket
  • Chrysler R3 Race Block .040in. MLS Cylinder Head Gasket; 4.200in. Bore; W2 Heads
  • Product Attributes:
    • Engine Make/Size: Chrysler/dodge R3 Iron Nascar«/late Model V8 Race Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Thickness is 0.040". Use with W2 Heads. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle