Shop for Discount Auto Parts, Replacement and Performance Parts and Accessories

2009 Volkswagen Eos Engine Harmonic Balancer Corteco

Part # P311-280C9F1 Manu # W0133-2107902 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $180.23

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Brand: Corteco

Vehicle	Engine Designation
2009 - Volkswagen Eos	CBFA

2016 Volkswagen Eos Engine Harmonic Balancer Dayco - Premium OEM Replacement Balancer

Part # P311-47A7714 Manu # PB1721N Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $217.63

Premium OEM Replacement Balancer
Product Attributes:
- Bolt Hole Quantity: 4
- Counterweight Balance: Neutral, No Counterweight
- Crank Bore:
  - 0.648
  - 16.45
- Crank Trigger/Exciter Plate: No
- Installation Instructions Included: No
- Nose Outside Diameter:
  - 1.772
  - 45.00
- Outer Ring Material: Steel
- Overall Outside Diameter:
  - 142.78
  - 5.622
- Pulley 1 Number Of Grooves: 6
- Pulley 1 Outside Diameter:
  - 138.20
  - 5.441
- Pulley 1 Type: Serpentine
- Ring Width:
  - 1.142
  - 29.00
- Timing Marks: Yes
- Woodruff Key Included: No

Brand: Dayco

Vehicle
2016 - Volkswagen Eos

2009 Volkswagen Eos Engine Harmonic Balancer Dayco - Premium OEM Replacement Balancer

Part # P311-316FEA0 Manu # PB1724N Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $220.30

Premium OEM Replacement Balancer
Product Attributes:
- Bolt Hole Quantity: 6
- Counterweight Balance: Neutral, No Counterweight
- Crank Bore:
  - 1.182
  - 30.00
- Crank Trigger/Exciter Plate: No
- Installation Instructions Included: No
- Nose Outside Diameter:
  - 0
  - 0.00
- Outer Ring Material: Cast Iron
- Overall Outside Diameter:
  - 143.00
  - 5.630
- Pulley 1 Outside Diameter:
  - 138.40
  - 5.449
- Pulley 1 Type: Serpentine
- Ring Width:
  - 1.142
  - 29.00
- Timing Marks: Yes
- Woodruff Key Included: No

Brand: Dayco

Vehicle	Engine Designation
2009 - Volkswagen Eos	BPY

2013 Volkswagen Eos Engine Harmonic Balancer 4 Cyl 2.0L Dorman

Part # P311-33C9F50 Manu # 594-752 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 06H105243F , 06H105243G , 06H105243K , 06K105243 , PB1721N

Qty:

In Stock & Ready to Ship

Best Price: $175.79

Harmonic Balancer Assembly
Product Attributes:
- Center Bolt Included: No
- Color/Finish: Black
- Degree Markings: Yes
- Depth: 5
- Drive Belt Type: Serpentine
- Grade Type: Regular
- Inside Diameter: 16.5
- Keyway Type: No
- Outside Diameter: 145
- Package Contents: 1 Harmonic Balancer
- Pulley Groove Quantity: 6
Features:
- Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
- Durable construction - stringent specifications and careful construction help ensure longevity
- Thoroughly tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Brand: Dorman

Vehicle	Block	Engine	CID	CC
2013 - Volkswagen Eos	L	4 Cyl 2.0L	121	1984

2008 Volkswagen Eos Engine Harmonic Balancer 4 Cyl 2.0L Dorman

Part # P311-4E2FDBC Manu # 594-335 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 022105243A , 06A105243E , 06B105243F , 06K105243D , 102237 , P-VW1.8 , PB1563N , PC-6005 , SK594335

Qty:

In Stock & Ready to Ship

Best Price: $178.49

Harmonic Balancer Assembly
Product Attributes:
- Color/Finish: Black
- Degree Markings: Yes
- Drive Belt Type: Serpentine
- Grade Type: Regular
- Package Contents: Balancer; Instruction Sheet
Features:
- Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
- Durable construction - stringent specifications and careful construction help ensure longevity
- Thoroughly tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Brand: Dorman

Vehicle	Block	Engine	CID	CC
2008 - Volkswagen Eos	L	4 Cyl 2.0L	121	1984

Engine Harmonic Balancer Quick Time

Part # P311-391B561 Manu # RM-715 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $50.65

Harmonic Balance Spacer
Harmonic Balance Spacer; 0.060 in./0.090 in./0.125 in.; Aluminum; 3 pc.;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Aluminum
3 piece set - Used to align belts on the harmonic balancer pulley; .060, .090, .125.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Quick Time

Vehicle

Engine Harmonic Balancer Fluidampr

Part # P311-4F2B374 Manu # 100001 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $168.73

Harmonic Balancer Adapter Hub - BBC - Int Balance - Single Key - Each
Harmonic Balancer Adapter Hub - Fluidampr - BBC - Internal Balance - Single 3/16" Key - Each
Product Attributes:
- Depth: 2.685
- Engine Balance: Internal
- Inside Diameter: 1.599
- Keyway Type: Single; (3/16")
- Prop 65 - Short Label: Ca-prop65-label.jpg
- Prop 65 (C, R, or CR): Cr
- Title: Fluidampr - 100001 - Harmonic Balancer Adapter Hub - Bbc - Int Balance - Single Key - Each
Features:
- Hub only
- Fits Fluidampr #800101 and #802050E
Repeat damper removal and installation can reduce vibration control. Maintain recommended Fluidampr press fit of 0.0005" - 0.0015". Fits Fluidampr #800101 and #802050E. Chevy 396-427ci, internal balance.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Fluidampr

Vehicle

Engine Harmonic Balancer Fluidampr

Part # P311-213F362 Manu # 610931 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $540.28

Harmonic Balancer - Fluidampr-RB25DET NON NEO
Harmonic Balancer - Fluidampr- R33 Skyline RB25DET NON NEO - Steel - Black Zinc Chromate - 6-1/8" dia - 10.5 lbs - SFI 18.1 - Made in USA - Each
Product Attributes:
- Degree Marking Range: Tdc. 6 Marks, 5 Deg
- Degree Markings: Engraved
- Depth: 2.625
- Drive Belt Type: Serpentine
- Engine Balance: Internal
- Inside Diameter: 1.326
- Keyway Type: Yes
- Mounting Hole Quantity: 1
- Outside Diameter: 6-1/8"
- Prop 65 - Short Label: Ca-prop65-label.jpg
- Prop 65 (C, R, or CR): Cr
- Pulley Groove Quantity: 4 Rear, 4 Middle, 3 Front
- Safety Rating: Sfi 18.1
- Title: Fluidampr - 610931 - Harmonic Balancer - Fluidampr-nissan Rb25det Non Neo
- Weight / Rotating Weight: 10.5 Lbs / 6.9 Lbs
Features:
- Broad RPM range protection.
- Reduce risk of crankshaft failure.
- Reduce wear on critical engine parts.
- Unleash lost torque & horsepower.
- No maintenance required
- SFI 18.1 spec. Made in USA.
Protect your engine. Modifications can compromise your stock harmonic balancer. Install a Fluidampr performance damper early for best durability. Superior viscous damper design controls harmful torsional vibration across the entire rpm range. Reduce wear on engine components. Reduce risk of crankshaft failure. Improve timing. Unleash lost torque and horsepower. Precision CNC machined and balanced high-grade steel components. Corrosion resistant black zinc finish with engraved timing marks. No maintenance required. Trusted by leading engine builders worldwide. SFI 18.1 certified. Made in USA.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Fluidampr

Vehicle

Engine Harmonic Balancer Fluidampr

Part # P311-25258F1 Manu # 840302 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $644.06

Harmonic Balancer - Fluidampr-SRT Hellcat 6.2L
Harmonic Balancer - Fluidampr- SRT Hellcat 6.2L Hemi- Steel - Black Anodized / Black Zinc Chromate - 6-1/8" dia - 12.5 lbs - SFI 18.1 - Made in USA - Each
Product Attributes:
- Degree Marking Range: N/a
- Degree Markings: N/a
- Depth: 3.65
- Drive Belt Type: Serpentine
- Engine Balance: Internal
- Inside Diameter: 1.48
- Keyway Type: No
- Mounting Hole Quantity: 1
- Outside Diameter: 8.43
- Prop 65 - Short Label: Ca-prop65-label.jpg
- Prop 65 (C, R, or CR): Cr
- Pulley Groove Quantity: 10 Rear, 6 Front
- Safety Rating: Sfi 18.1
- Title: Fluidampr - 840302 - Harmonic Balancer - Fluidampr-srt Hellcat 6.2l Hemi
- Weight / Rotating Weight: 12.4 Lbs / 8.2 Lbs
Features:
- Broad RPM range protection.
- Reduce risk of crankshaft failure.
- Reduce wear on critical engine parts.
- Unleash lost torque & horsepower.
- No maintenance required
- SFI 18.1 spec. Made in USA.
Protect your engine. Modifications can compromise your stock harmonic balancer. Install a Fluidampr performance damper early for best durability. Superior viscous damper design controls harmful torsional vibration across the entire rpm range. Reduce wear on engine components. Reduce risk of crankshaft failure. Improve timing. Unleash lost torque and horsepower. Precision CNC machined and balanced high-grade steel and Aluminum components. Corrosion resistant black anodized pulley and black zinc hub finish with engraved timing marks. No maintenance required. Trusted by leading engine builders worldwide. SFI 18.1 certified. Made in USA.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Fluidampr

Vehicle

Engine Harmonic Balancer Fluidampr

Part # P311-5818637 Manu # 300014 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $158.10

Harmonic Balancer - Fluidampr - Installation Kit - 2003-2007 6.0L Power Stroke
Harmonic Balancer - Fluidampr - Installation Kit - 2003-2007 6.0L Power Stroke High Strength Bolt Kit - Up to 700 hp / 1,250 ft-lbs torque
Product Attributes:
- Prop 65 - Short Label: Ca-prop65-label.jpg
- Prop 65 (C, R or CR: Cr
- Title: Fluidampr - 300014 - Harmonic Balancer - Fluidampr - Installation Kit - 2003-2007 6.0l Power Stroke
Features:
- Secure Mounting
- High quality hardware
For 2003-2007 Ford 6.0L Power Stroke applications up to 700 hp / 1,250 ft-lbs torque, Fluidampr recommends damper installation with the High Strength Bolt Kit for secure mounting. Kit features heat treated, high strength bolts from ARP and a diamond impregnated friction washer.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Fluidampr

Vehicle

Engine Harmonic Balancer Fluidampr

Part # P311-2778E0A Manu # 570901 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $561.62

Harmonic Balancer - Fluidampr-Nissan GTR R35 VR-38DETT
Harmonic Balancer - Fluidampr- Nissan GTR R35 VR 38DETT - Steel - Black Zinc Chromate - 6" dia - 9.7 lbs - SFI 18.1 - Made in USA - Each
Product Attributes:
- Degree Marking Range: Tdc. 2 Marks, 5 Deg
- Degree Markings: Engraved
- Depth: 3.140"
- Drive Belt Type: Serpentine
- Engine Balance: Internal
- Inside Diameter: 1.2583
- Keyway Type: Yes
- Mounting Hole Quantity: 1
- Outside Diameter: 6"
- Prop 65 - Short Label: Ca-prop65-label.jpg
- Prop 65 (C, R, or CR): Cr
- Pulley Groove Quantity: 7 Rib
- Safety Rating: Sfi 18.1
- Title: Fluidampr - 570901 - Harmonic Balancer - Fluidampr-nissan R35 Vr38 Dett
- Weight / Rotating Weight: 9.7 Lbs / 6.4 Lbs
Features:
- Broad RPM range protection.
- Reduce risk of crankshaft failure.
- Reduce wear on critical engine parts.
- Unleash lost torque & horsepower.
- No maintenance required
- SFI 18.1 spec. Made in USA.
Protect your engine. Modifications can compromise your stock harmonic balancer. Install a Fluidampr performance damper early for best durability. Superior viscous damper design controls harmful torsional vibration across the entire rpm range. Reduce wear on engine components. Reduce risk of crankshaft failure. Improve timing. Unleash lost torque and horsepower. Precision CNC machined and balanced high-grade steel components. Corrosion resistant black zinc finish with engraved timing marks. No maintenance required. Trusted by leading engine builders worldwide. SFI 18.1 certified. Made in USA.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Fluidampr

Vehicle

Engine Harmonic Balancer Fluidampr

Part # P311-46BEB48 Manu # 300015 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $158.10

Harmonic Balancer - Fluidampr - Installation Kit - 2008-2010 6.4L Power Stroke
Harmonic Balancer - Fluidampr - Installation Kit - 2008-2010 6.4L Power Stroke High Strength Bolt Kit - Up to 700 hp / 1,250 ft-lbs torque
Product Attributes:
- Prop 65 - Short Label: Ca-prop65-label.jpg
- Prop 65 (C, R or CR): Cr
- Title: Fluidampr - 300015 - Harmonic Balancer - Fluidampr - Installation Kit - 2008-2010 6.4l Power Stroke
Features:
- Secure Mounting
- High quality hardware
For 2008-2010 Ford 6.4L Power Stroke applications up to 700 hp / 1,250 ft-lbs torque, Fluidampr recommends damper installation with the High Strength Bolt Kit for secure mounting. Kit features heat treated, high strength bolts from ARP and a diamond impregnated friction washer.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Fluidampr

Vehicle

Engine Harmonic Balancer Fluidampr

Part # P311-195EB6D Manu # 300016 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $158.10

Harmonic Balancer - Fluidampr - Install Kit - 2011-Present 6.7L Power Stroke
Harmonic Balancer - Fluidampr - Installation Kit - 2011-Present 6.7L Power Stroke High Strength Bolt Kit - Up to 700 hp / 1,250 ft-lbs torque
Product Attributes:
- Prop 65 - Short Label: Ca-prop65-label.jpg
- Prop 65 (C, R or CR): Cr
- Title: Fluidampr - 300016 - Harmonic Balancer - Fluidampr - Installation Kit - 2011-present 6.7l Power Stroke
Features:
- Secure Mounting
- High quality hardware
For 2011-Present 6.7L Power Stroke applications up to 700 hp / 1,250 ft-lbs torque, Fluidampr recommends damper installation with the High Strength Bolt Kit for secure mounting. Kit features heat treated, high strength bolts from ARP and a diamond impregnated friction washer.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Fluidampr

Vehicle

Engine Harmonic Balancer Ford Performance

Part # P311-193A7FB Manu # M-6316-C351 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $468.59

Harmonic Damper
Harmonic Damper; 302/351; 28.2 oz. Balance; Meets SFI 18-1; 11.5 lbs.;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- 28.2 oz. Balance
- Meets SFI Approval
These crankshaft dampers from Ford Racing will control crank twisting at all rpm, reducing valve train vibration and minimizing timing scatter. They're available in iron and steel for a variety of applications to suit your needs.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Ford Performance

Vehicle

Engine Harmonic Balancer Ford Performance

Part # P311-5BCE4C5 Manu # M-6316-A460 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $434.70

Harmonic Damper
Harmonic Damper; 429/460; Neutral Balance; Meets SFI 18-1; 10.1 lbs.;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Neutral Balance
- Meets SFI Approval
These crankshaft dampers from Ford Racing will control crank twisting at all rpm, reducing valve train vibration and minimizing timing scatter. They're available in iron and steel for a variety of applications to suit your needs.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Ford Performance

Vehicle

Engine Harmonic Balancer Dayco

Part # P311-57B2A06 Manu # PB1199N Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $314.80

Product Attributes:
- Bolt Hole Quantity: 2
- Counterweight Balance: Neutral, No Counterweight
- Crank Bore:
  - 1.249
  - 31.72
- Crank Trigger/Exciter Plate: No
- Installation Instructions Included: No
- Nose Outside Diameter:
  - 1.876
  - 47.65
- Outer Ring Material: Cast Iron
- Overall Outside Diameter:
  - 167.50
  - 6.595
- Pulley 1 Outside Diameter:
  - 167.500
  - 6.595
- Pulley 1 Type: V-belt
- Ring Width:
  - 0.610
  - 15.49
- Timing Marks: Yes
- Woodruff Key Included: No

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Dayco

Vehicle

2009 Volkswagen Eos Engine Harmonic Balancer Autopart International

Part # P311-5DD1EC1 Manu # W0133-4698327 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $79.55

Autopart International Engine Harmonic Balancer

Brand: Autopart International

Vehicle	Engine Designation
2009 - Volkswagen Eos	CBFA

Engine Harmonic Balancer Holley

Part # P311-0235987 Manu # 97-205 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $375.09

Harmonic Balancer
Harmonic Balancer; Damper/Hub Assembly; 1.48 in. Inside/7.5 in. Outside Diameter; Black;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Steel Material
- Black Finish
- Genuine Holley Quality Parts
DAMPER/HUB Assembly Mid-Mount accessory drives - GM LS engines.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Engine Harmonic Balancer Fluidampr

Part # P311-587A5C7 Manu # 910302 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $632.03

Harmonic Balancer - Fluidampr-SRT Hellcat 6.2L 11% Overdrive
Harmonic Balancer - Fluidampr- 11% Overdrive SRT Hellcat 6.2L Hemi- Steel - Black Anodized / Black Zinc Chromate - 6-1/8" dia - 12.5 lbs - SFI 18.1 - Made in USA - Each
Product Attributes:
- Degree Marking Range: N/a
- Degree Markings: N/a
- Depth: 3.65
- Drive Belt Type: Serpentine
- Engine Balance: Internal
- Inside Diameter: 1.48
- Keyway Type: No
- Mounting Hole Quantity: 1
- Outside Diameter: 9.17
- Prop 65 - Short Label: Ca-prop65-label.jpg
- Prop 65 (C, R, or CR): Cr
- Pulley Groove Quantity: 10 Rear, 6 Front
- Safety Rating: Sfi 18.1
- Title: Fluidampr - 910302 - Harmonic Balancer - Fluidampr-srt Hellcat 6.2l Hemi 11% Overdrive
- Weight / Rotating Weight: 13.1 Lbs / 8.7 Lbs
Features:
- Broad RPM range protection.
- Reduce risk of crankshaft failure.
- Reduce wear on critical engine parts.
- Unleash lost torque & horsepower.
- No maintenance required
- SFI 18.1 spec. Made in USA.
Protect your engine. Modifications can compromise your stock harmonic balancer. Install a Fluidampr performance damper early for best durability. Superior viscous damper design controls harmful torsional vibration across the entire rpm range. Reduce wear on engine components. Reduce risk of crankshaft failure. Improve timing. Unleash lost torque and horsepower. Precision CNC machined and balanced high-grade steel and Aluminum components. Corrosion resistant black anodized pulley and black zinc hub finish with engraved timing marks. No maintenance required. Trusted by leading engine builders worldwide. SFI 18.1 certified. Made in USA.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Fluidampr

Vehicle

Engine Harmonic Balancer Ford Performance

Part # P311-46973B8 Manu # M-6316-D302 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $429.27

Harmonic Damper
Harmonic Damper; 302/351; Neutral Balance; Meets SFI 18-1; 10.6 lbs.;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Neutral Balance
- Meets SFI Approval
These crankshaft dampers from Ford Racing will control crank twisting at all rpm, reducing valve train vibration and minimizing timing scatter. They're available in iron and steel for a variety of applications to suit your needs.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Ford Performance

Vehicle

Finish Selecting Your Vehicle to Shop For Your Harmonic Balancer

Shop By Brand

Shop By Related Engine Harmonic Balancer Parts

Shop for Top Selling Genuine Volkswagen Eos Harmonic Balancers

Shop Volkswagen Eos Harmonic Balancers

Finish Selecting Your Vehicle to Shop For Your Harmonic Balancer

Shop By Brand

Shop By Related Engine Harmonic Balancer Parts

Shop for Top Selling Genuine Volkswagen Eos Harmonic Balancers