Shop for Discount Auto Parts, Replacement and Performance Parts and Accessories

2008 Toyota Sienna Fuel Pump Module Assembly 6 Cyl 3.5L Delphi

Part # P311-21C32A8 Manu # FG0920 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 77020-08040 , 77020-08060 , 7702008040 , 83320-08030 , 950-0231 , A30430 , A46539 , C0685M , CFG0920 , E8757M , E8805M , P76705M , SP9022M , SP9023M , USEP8805M

Qty:

In Stock & Ready to Ship

Best Price: $507.16

Fuel Pump Module Assembly
Product Attributes:
- Average Current Draw: 14
- Average Flow Rating: 21
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Connector Gender: Female
- Connector Quantity: 1
- Connector Shape: Trapezoid
- Fuel Filter Included: Yes
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Fuel Type: Gas
- Gasket Or Seal Included: Yes
- Gasket Or Seal Material: Nitrile Rubber
- Grade Type: Premium
- In Tank or External: In Tank
- Inlet Type: Strainer
- Installation Warnings: No
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pressure: 65
- Minimum Pressure: 47
- Mounting Hardware Included: No
- Negative Ground: No
- Outlet Outside Diameter: 0.313
- Outlet Quantity: 1
- Outlet Type: Push In
- Pump Design: Turbine
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 412
- Resistance Ohms Full: 15
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Voltage: 12
- Wire Harness Included: No
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Brand: Delphi

Vehicle	Block	Engine	CID	CC
2008 - Toyota Sienna	V	6 Cyl 3.5L	-	3456

2009 Toyota Sienna Fuel Pump Module Assembly Autopart International

Part # P311-243E88C Manu # W0133-3417202 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $250.62

Autopart International Fuel Pump Module Assembly

Brand: Autopart International

Vehicle
2009 - Toyota Sienna

2007 Toyota Sienna Fuel Pump Module Assembly Autopart International

Part # P311-243E88C Manu # W0133-3417202 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $250.62

Production: 12/01/2006-

Brand: Autopart International

Vehicle	Prod. Date Range
2007 - Toyota Sienna	Fr:12-01-06

2010 Toyota Sienna Fuel Pump Module Assembly Autopart International

Part # P311-243E88C Manu # W0133-3417202 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $250.62

Production: -12/31/2009

Brand: Autopart International

Vehicle	Prod. Date Range
2010 - Toyota Sienna	To:12-31-09

2016 Toyota Sienna Fuel Pump Module Assembly 6 Cyl 3.5L Carter

Part # P311-0802CD8 Manu # P76777M Condition: New

This Part Fits the Following OEM/Substitute Numbers: 1234944 , 2920941 , 77020-08050 , A33152 , B15112580TG , C-0733-M , C0733M , E9015M , FG1274 , M2521033 , SP9023M

Qty:

In Stock & Ready to Ship

Best Price: $290.93

Fuel Pump Module Assembly
Product Attributes:
- : No Proposition 65 Warning Is Required With This Product.
- Connector Color: White
- Connector Gender: Female
- Connector Shape: Quad Oval
- Fuel Filter Included: No
- Gasket Or Seal Included: Yes
- Grade Type: Regular
- Inlet Type: Port
- Minimum Flow Rating: 27
- Minimum Pressure: 51.0
- Mounting Hardware Included: No
- Outlet Quantity: 1
- Outlet Type: Quick Connect
- Pump Type: Electric
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Top Mount Diameter: 149.0
- Wire Gauge Measurement: 20
- Wire Harness Included: No
- Wire Quantity: 4
- Wiring Harness Length: 300.0
Features:
- Carter Electric Fuel Pumps and Electric Fuel Pump Assemblies are made with all new materials under rigorous quality controlled manufacturing and testing procedures.
- Quality Carter Electric Fuel Pumps and Fuel Pump Assemblies deliver optimum performance while providing long life.
- Most applications include the necessary accessories such as tank seals, patented high-gradient density strainers and wiring harnesses.
- Fuel sensor design provides resistance to corrosive fuel blends and additives.
The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.

Brand: Carter

Vehicle	Block	Engine	CID	CC
2016 - Toyota Sienna	V	6 Cyl 3.5L	-	3456

2010 Toyota Sienna Fuel Pump Module Assembly 6 Cyl 3.5L US Motor Works - ELECTRIC FUEL PUMP MODULE

Part # P311-435A32D Manu # USEP8805M Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $256.87

ELECTRIC FUEL PUMP MODULE
Product Attributes:
- California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer & Reproductive Harm.
Includes: Tank Seal, Hardware

Brand: US Motor Works

Vehicle	Block	Engine	CID	CC
2010 - Toyota Sienna	V	6 Cyl 3.5L	-	3456

2006 Toyota Sienna Fuel Pump Module Assembly 6 Cyl 3.3L TYC Products - TYC CRQ Premium Fuel Pump Module

Part # P311-454579A Manu # 150417-A Condition: New

This Part Fits the Following OEM/Substitute Numbers: 77020-08031 , E8841M

Qty:

In Stock & Ready to Ship

Best Price: $127.90

TYC Fuel Pump Module Assembly
TYC CRQ Premium Fuel Pump Module

Brand: TYC Products

Vehicle	Submodel	Body	Aspiration	Block	Engine	CID	CC
2006 - Toyota Sienna	XLE	Mini Passenger Van	Naturally Aspirated	V	6 Cyl 3.3L	202	3300

2007 Toyota Sienna Fuel Pump Module Assembly 6 Cyl 3.5L TYC Products - TYC CRQ Premium Fuel Pump Module

Part # P311-40F00E9 Manu # 150403-A Condition: New

This Part Fits the Following OEM/Substitute Numbers: 77020-08040 , E8805M

Qty:

In Stock & Ready to Ship

Best Price: $104.88

TYC Fuel Pump Module Assembly
TYC CRQ Premium Fuel Pump Module

Brand: TYC Products

Vehicle	Submodel	Body	Block	Engine	CID	CC
2007 - Toyota Sienna	CE	Mini Cargo Van	V	6 Cyl 3.5L	-	3456

2013 Toyota Sienna Fuel Pump Module Assembly 6 Cyl 3.5L TYC Products - TYC CRQ Premium Fuel Pump Module

Part # P311-304F516 Manu # 150364-A Condition: New

This Part Fits the Following OEM/Substitute Numbers: 77020-08050 , E9015M , P76777M , SP9023M

Qty:

In Stock & Ready to Ship

Best Price: $113.40

TYC CRQ Premium Fuel Pump Module
Product Attributes:
- Connector Pins Qty On Main Connector: 5pins
- Fuel Level Sensor Resitance Range: 410-15
- Fuel Tube Connection Type: Quick Connect
- Gph (gallons Per Hour Flow): 35.7-46.23
- Maximum Air Pressure: 58-62

Brand: TYC Products

Vehicle	Block	Engine	CID	CC
2013 - Toyota Sienna	V	6 Cyl 3.5L	-	3456

2015 Toyota Sienna Fuel Pump Module Assembly 6 Cyl 3.5L Delphi

Part # P311-41156F5 Manu # FG1274 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 77020-08050 , 7702008050 , 83320-08030 , A46539 , CFG1274 , E9015M , P76777M , SP9023M , USEP9015M

Qty:

In Stock & Ready to Ship

Best Price: $491.82

Fuel Pump Module Assembly
Product Attributes:
- Average Current Draw: 9
- Average Flow Rating: 20
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Connector Gender: Female
- Connector Quantity: 1
- Connector Shape: Trapezoid
- Fuel Filter Included: Yes
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Fuel Type: Gas
- Gasket Or Seal Included: Yes
- Gasket Or Seal Material: Nitrile Rubber
- Grade Type: Premium
- In Tank or External: In Tank
- Inlet Type: Strainer
- Installation Warnings: No
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pressure: 80
- Minimum Pressure: 58
- Mounting Hardware Included: No
- Negative Ground: No
- Outlet Outside Diameter: 0.313
- Outlet Quantity: 1
- Outlet Type: Push In
- Pump Design: Turbine
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 412
- Resistance Ohms Full: 15
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Voltage: 12
- Wire Harness Included: No
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Brand: Delphi

Vehicle	Block	Engine	CID	CC
2015 - Toyota Sienna	V	6 Cyl 3.5L	-	3456

2008 Toyota Sienna Fuel Pump Module Assembly 6 Cyl 3.5L Delphi

Part # P311-03238FF Manu # PN3180 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 77020-08040 , 77020-08060 , 83320-08030 , 950-0231 , A30430 , A46539 , C0685M , E8757M , E8805M , P76705M , SP9022M , SP9023M , USEP8805M

Qty:

In Stock & Ready to Ship

Best Price: $234.36

Fuel Pump Module Assembly
Product Attributes:
- Average Current Draw: 14
- Average Flow Rating: 21
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Connector Gender: Female
- Connector Quantity: 1
- Connector Shape: Trapezoid
- Fuel Filter Included: Yes
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Fuel Type: Gas
- Gasket Or Seal Included: Yes
- Gasket Or Seal Material: Nitrile Rubber
- Grade Type: Regular
- In Tank or External: In Tank
- Inlet Type: Strainer
- Installation Warnings: No
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pressure: 65
- Minimum Pressure: 47
- Mounting Hardware Included: No
- Negative Ground: No
- Outlet Outside Diameter: 0.313
- Outlet Quantity: 1
- Outlet Type: Push In
- Pump Design: Turbine
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 412
- Resistance Ohms Full: 15
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Voltage: 12
- Wire Harness Included: No
Features:
- Instructional installation sheets included in every box
- Always be sure to check and clean fuel tank to avoid returns
- Each part undergoes testing to ensure the same fit, form, and function as the OE
Sparta, distributed by the only OE full-line fuel supplier Delphi, is specifically designed for higher mileage and earlier model vehicles. Turn to the brand backed by the OE experts, who know fit and performance better than anyone.

Brand: Delphi

Vehicle	Block	Engine	CID	CC
2008 - Toyota Sienna	V	6 Cyl 3.5L	-	3456

2005 Toyota Sienna Fuel Pump Module Assembly 6 Cyl 3.3L Delphi

Part # P311-0596D22 Manu # FG1381 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 23217-0A050 , 23221-0A050 , 69750 , 77020-08031 , 7702008031 , 951-0023 , 952-0090 , A33264 , B0246E , CFG1381 , E16307 , E8513 , E8841M , P76369 , P76693M , SP1344 , SP9021M , USEP8841M

Qty:

In Stock & Ready to Ship

Best Price: $414.26

Fuel Pump Module Assembly
without Pressure Sensor
Product Attributes:
- Average Current Draw: 11
- Average Flow Rating: 20
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Connector Gender: Female
- Connector Quantity: 1
- Connector Shape: Trapezoid
- Fuel Filter Included: Yes
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Fuel Type: Gas
- Gasket Or Seal Included: Yes
- Gasket Or Seal Material: Nitrile Rubber
- Grade Type: Premium
- In Tank or External: In Tank
- Inlet Type: Strainer
- Installation Warnings: No
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pressure: 80
- Minimum Pressure: 51
- Mounting Hardware Included: No
- Negative Ground: No
- Outlet Outside Diameter: 0.313
- Outlet Quantity: 1
- Outlet Type: Push In
- Pump Design: Turbine
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 110
- Resistance Ohms Full: 5
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Voltage: 12
- Wire Harness Included: No
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Brand: Delphi

Vehicle	Block	Engine	CID	CC
2005 - Toyota Sienna	V	6 Cyl 3.3L	202	3300

Fuel Pump Module Assembly Holley

Part # P311-15888C6 Manu # 12-139 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $557.14

Fuel Cell EFI Pump Module Assembly
Fuel Cell EFI Pump Module Assembly; 6 Bolt Flange; 255 LPH Drop-In Module; 8AN Inlet/10AN Outlet;
Product Attributes:
- Flange Type: 6 Bolt
- Free Flow GPH: 67
- Fuel Type: Gasoline
- Fully Open: 255
- Maximum PSI: 80
- Outlet Size: 10an
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Update Your Fuel Cell To EFI The Easy Way
- Designed To Drop Right In Your Existing 6/12 Bolt Flange
- Billet Top Flange Housing
- Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
Updating your racing fuel system to EFI is so simple! Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 6 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 550 EFI or 700 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw)

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-5707EB8 Manu # 19-370 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $466.94

Fuel Cell EFI Pump Module Assembly
Fuel Cell EFI Pump Module Assembly; Return Style; 6-Bolt Flange; 340 LPH Drop-In Module; 6AN Inlet/6AN Outlet;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Update Your Fuel Cell To EFI The Easy Way
- Designed To Drop Right In Your Existing 6/12 Bolt Flange
- Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
Updating your racing fuel system to EFI is so simple! Sniper is introducing their latest Diecast Fuel Cell EFI Pump Modules. The modules were designed to drop in as a direct replacement for your existing 6 bolt flange fuel cell cap assembly. The diecast aluminum top flange includes an 6AN inlet port, a 6AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 340 LPH fuel pumps in both return and returnless system designs. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 700 EFI or 900 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw)

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-5E83093 Manu # 12-146 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $647.15

Fuel Cell EFI Pump Module Assembly
Fuel Cell EFI Pump Module Assembly; 12 Bolt Flange; 450 LPH Drop-In Module; 8AN Inlet/10AN Outlet;
Product Attributes:
- Flange Type: 12 Bolt
- Free Flow GPH: 118
- Fuel Type:
  - E85
  - Gasoline
- Fully Open: 450
- Maximum PSI: 87
- Outlet Size: 10an
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Update Your Fuel Cell To EFI The Easy Way
- Designed To Drop Right In Your Existing 6/12 Bolt Flange
- Billet Top Flange Housing
- Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
Updating your racing fuel system to EFI is so simple! Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw)

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-13FC370 Manu # 19-380 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $441.48

Fuel Cell EFI Pump Module Assembly
Fuel Cell EFI Pump Module Assembly; Return Style; 12-Bolt Flange; 340 LPH Drop-In Module; 6AN Inlet/6AN Outlet;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Update Your Fuel Cell To EFI The Easy Way
- Designed To Drop Right In Your Existing 6/12 Bolt Flange
- Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
Updating your racing fuel system to EFI is so simple! Sniper is introducing their latest Diecast Fuel Cell EFI Pump Modules. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The diecast aluminum top flange includes an 6AN inlet port, a 6AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 340 LPH fuel pumps in both return and returnless system designs. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 700 EFI or 900 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw)

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-20C92DE Manu # 12-144 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $619.51

Fuel Cell EFI Pump Module Assembly
Fuel Cell EFI Pump Module Assembly; 12 Bolt Flange; 255 LPH Drop-In Module; 8AN Inlet/10AN Outlet;
Product Attributes:
- Flange Type: 12 Bolt
- Free Flow GPH: 67
- Fuel Type: Gasoline
- Fully Open: 255
- Maximum PSI: 80
- Outlet Size: 10an
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Update Your Fuel Cell To EFI The Easy Way
- Designed To Drop Right In Your Existing 6/12 Bolt Flange
- Billet Top Flange Housing
- Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
Updating your racing fuel system to EFI is so simple! Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 550 EFI or 700 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw)

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-1236054 Manu # 12-132 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $800.71

In-Tank Retrofit Fuel Module
In-Tank Retrofit Fuel Module; 450 LPH; Install In Any Tank From 7 in. to 12 in. Deep;
Product Attributes:
- Diameter (in.): 4.800 In.
- Fuel Type:
  - E85
  - Gasoline
- Fully Open: 450
- WARNING CA Proposition 65: No
Features:
- Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
- The Low Profile Design For Added Clearance When Needed
- Clamping System Allows You To Locate Module Anywhere In The Tank
- 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
- Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
- Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
- 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile 5 inch diameter design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-503382E Manu # 12-156 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $237.45

In-Tank Retrofit Fuel Module
In-Tank Retrofit Fuel Module; 255 LPH; Returnless Style;
Product Attributes:
- Fully Open: 255
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Returnless Style
- 255 LPH
255 LPH Replacement pump for Retro-Fit and Fuel Cell Modules

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Finish Selecting Your Vehicle to Shop For Your Fuel Pump Module

Shop By Brand

Shop By Related Fuel Pump Module Assembly Parts

Shop for Top Selling Genuine Toyota Sienna Fuel Pump Modules

Shop Toyota Sienna Fuel Pump Modules

Finish Selecting Your Vehicle to Shop For Your Fuel Pump Module

Shop By Brand

Shop By Related Fuel Pump Module Assembly Parts

Shop for Top Selling Genuine Toyota Sienna Fuel Pump Modules