Shop for Discount Auto Parts, Replacement and Performance Parts and Accessories

1999 Chevrolet C1500 Suburban Fuel Pump Module Assembly 8 Cyl 5.7L Delphi

Part # P311-3EDF4F4 Manu # FG0092 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 19177231 , 19331243 , 1AMFP00095 , 25314341 , 67382 , 953-0020 , 953-5049 , 9535049 , A30032 , AFS0451S , D5331028 , E3967M , EFG0092 , M312883 , MPA30032 , MU152 , MU1748 , P74771M , P74773M , RE0482S , SP6152M

Qty:

In Stock & Ready to Ship

Best Price: $265.99

Fuel Pump Module Assembly
with Original OE design had a 2x2 connector, OE design upgraded to a 1x4 Connector with A 1x4 splice kit included for vehicles with 2x2 Connector ; To be used only when failed fuel module cover contains a 3-pin pressure sensor Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Product Attributes:
- Average Current Draw: 10
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pressure: 109.0
- Outlet Outside Diameter: 0.375
- Outlet Quantity: 2
- Pump Type: Electric
- Regulator Included: No
- Resistance Ohms Empty: 40.0
- Resistance Ohms Full: 250.0
- Strainer Included: Yes
- System Pressure: 62 Psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Vapor Pressure Sensor: Yes
- Voltage: 13.0
100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Brand: Delphi

Vehicle	Aspiration	Fuel Type	Engine VIN	Block	Engine	CID	CC
1999 - Chevrolet C1500 Suburban	Naturally Aspirated	GAS	R	V	8 Cyl 5.7L	350	-

1998 Chevrolet C1500 Suburban Fuel Pump Module Assembly 8 Cyl 5.7L AutoBest

Part # P311-052D2C0 Manu # F2978A Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $88.32

w/2 Electrical Connectors w/Module Code GFN Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal
Product Attributes:
- Inlet Diameter: 0.36199999999999999
- Outlet Diameter: 0.373

Brand: AutoBest

Vehicle	Block	Engine	CID	CC
1998 - Chevrolet C1500 Suburban	V	8 Cyl 5.7L	350	-

1999 Chevrolet C1500 Suburban Fuel Pump Module Assembly 8 Cyl 5.7L Airtex

Part # P311-37C1862 Manu # E3967M Condition: New

This Part Fits the Following OEM/Substitute Numbers: 150016 , 19177231 , 25314341 , 402-P3967M , 67382 , 953-0020 , 953-5049 , E3967M , E3967MN , EC967M , EFP3967M , FG0092 , MU152 , MU1748 , P575M , P74773M , SP6152M , USEP3967M

Qty:

In Stock & Ready to Ship

Best Price: $108.31

w/2 Electrical Connectors, w/Module Code GFN; Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness, and Tank Seal Wiring Harness Included.
Airtex fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every Airtex Fuel Pump to deliver greater reliability. Airtex enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All Airtex pumps meet or exceed OE specifications in fit, form and function.

Brand: Airtex

Vehicle	Block	Engine	CID	CC
1999 - Chevrolet C1500 Suburban	V	8 Cyl 5.7L	350	-

1998 Chevrolet C1500 Suburban Fuel Pump Module Assembly 8 Cyl 5.7L AutoBest

Part # P311-1093ECE Manu # F2905A Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $83.63

w/1 Electrical Connector w/Module Code GFD or GFM Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal
Product Attributes:
- Inlet Diameter: 0.36199999999999999
- Outlet Diameter: 0.373

Brand: AutoBest

Vehicle	Block	Engine	CID	CC
1998 - Chevrolet C1500 Suburban	V	8 Cyl 5.7L	350	-

1999 Chevrolet C1500 Suburban Fuel Pump Module Assembly 8 Cyl 5.7L US Motor Works - ELECTRIC FUEL PUMP MODULE

Part # P311-124EF9C Manu # USEP3967M Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $118.07

ELECTRIC FUEL PUMP MODULE
Product Attributes:
- California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer & Reproductive Harm.
Includes: Tank Seal, Wiring Harness Kit

Brand: US Motor Works

Vehicle	Aspiration	Fuel Type	Engine VIN	Block	Engine	CID	CC
1999 - Chevrolet C1500 Suburban	Naturally Aspirated	GAS	R	V	8 Cyl 5.7L	350	-

Bosch

1999 Chevrolet C1500 Suburban Fuel Pump Module Assembly 8 Cyl 6.5L Bosch - Fuel Pump Module Assembly (New)

Part # P311-394DD23 Manu # 67382 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 19177231

Qty:

In Stock & Ready to Ship

Best Price: $226.19

Click Here to View Product Images

Bosch Fuel Pump Module Assembly
Fuel Pump Module Assembly (New)
Product Attributes:
- Cases Per Pallet (ORLY): 75
- Electric Or Mechanical: Electric
- Gaskets Included (Fuel Pump): Yes
- In-Line Pump: N
- Mounting Hardware Included: No
- Negative Ground: No
- New Or Remanufactured: New
- Package Contents: 1 Module Assembly
- Prefiltro usado con bomba: Yes
- Prop 65 Warning Label Required?: No
- Pump Only Or Module: Module
Features:
- Bosch "Better than OE design", improves upon ease of installation, drivability of your vehicle and extends the life of the vehicle
- Bosch Aftermarket Fuel Assemblies are built and tested to the same rigorous quality standards as our OE fuel pumps to ensure a long, reliable service life
- Patented Turbine Pump technology virtually eliminates fuel pulsation, noise, and reduces hot-start problems
- Designed to operate under extreme temperatures and under low fuel conditions while maintaining an extended service life
- All Bosch fuel pumps are ‘end-of-line’ function tested in order to ensure highest quality and performance of all pumps in our program.
Nuestro equipo de ingenieros de Bosch lleva los beneficios de las bombas de combustible premium al mercado de repuestos automotrices. Las bombas de combustible Bosch se fabrican en las mismas líneas de producción y luego se fabrican y luego se prueban con los mismos estándares de calidad rigurosos que las bombas de combustible Bosch de equipo original para garantizar una vida útil prolongada y confiable. Haga el trabajo bien la primera vez, siempre, con las bombas de combustible Bosch Premium.

Brand: Bosch

Vehicle	Block	Engine	CID	CC
1999 - Chevrolet C1500 Suburban	V	8 Cyl 6.5L	395	-

1999 Chevrolet C1500 Suburban Fuel Pump Module Assembly 8 Cyl 5.7L Dorman

Part # P311-21EBF56 Manu # 2630333 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 150016 , 19177231 , 25314341 , E3967M , FG0092 , MU1748 , P74773M , SP6152M

Qty:

In Stock & Ready to Ship

Best Price: $128.64

Fuel Pump Module Assembly
w/Harness Code (GFN)
Product Attributes:
- Connector Color: White
- Connector Gender: Female
- Connector Shape: Flat Plug
- Height: 270
- Housing Length: 184
- Housing Material: Plastic
- Housing Width: 94
- Inlet Outside Diameter: 7.89
- Inlet Type: Male
- Length: 19.5
- Lock Ring Included: No
- Maximum Flow Rating: 30.91
- Maximum Pressure: 116.03
- Outlet Diameter: 9.49 Mm
- Outlet Type: Male
- Package Contents: 1 Fuel Pump Module Assembly
- Terminal Gender: Male Female
- Terminal Quantity: 4
- Terminal Type: Spade
- Top Mount Diameter: 6.35
- Universal Or Specific Fit: Specific
- Width: 6.35
- Wire Gauge Measurement: 1.5
- Wire Quantity: 4
Features:
- Direct replacement - this fuel pump assembly matches the fit and function of the original equipment fuel pump on specified vehicles
- Durable construction - this fuel pump is made of quality materials for a long service life
- Saves money - offers original equipment quality at a competitive price
- Quality assured - this fuel pump assembly has undergone rigorous testing to ensure reliable performance
This fuel pump module assembly matches the fit and function of the original parts in specific vehicles. Built from durable materials, this pump is designed to be reliable over a long service life.

Brand: Dorman

Vehicle	Block	Engine	CID	CC
1999 - Chevrolet C1500 Suburban	V	8 Cyl 5.7L	350	-

1998 Chevrolet C1500 Suburban Fuel Pump Module Assembly 8 Cyl 5.7L TYC Products - TYC CRQ Premium Fuel Pump Module

Part # P311-1D6F692 Manu # 150016-A Condition: New

This Part Fits the Following OEM/Substitute Numbers: 19177231 , 402-P3967M , 530-2280 , E3967M , EC967M , F2978A , FG0092 , P74773M , SP6152M , USEP3967M

Qty:

In Stock & Ready to Ship

Best Price: $111.95

with 2 Electrical Connectors with Module CODE GFN
TYC CRQ Premium Fuel Pump Module
Product Attributes:
- Accessories Included: Yes
- Connector Pins Qty On Main Connector: 4pins
- Fuel Level Sensor Resitance Range: 40-250
- Fuel Tube Connection Type: Quick Connect
- Gph (gallons Per Hour Flow): 48.6-57.7
- Maximum Air Pressure: 72.5-130.5
- Strainer Included: Yes

Brand: TYC Products

Vehicle	Block	Engine	CID	CC
1998 - Chevrolet C1500 Suburban	V	8 Cyl 5.7L	350	-

1999 Chevrolet C1500 Suburban Fuel Pump Module Assembly 8 Cyl 5.7L Carter

Part # P311-314044D Manu # P74773M Condition: New

This Part Fits the Following OEM/Substitute Numbers: 150016 , 19177227 , 19177231 , 19331243 , 19332073 , 25314021 , 25314325 , 25314340 , 25314341 , 2630333 , 2920076 , 2920079 , 402-P3967M , 530-2280 , 530-2286 , 67382 , 953-0020 , 953-2286 , 953-5045 , A30032 , A30098 , B11111993TG , C-0362-M , C0362M , C8024 , E3963M , E3967M , FEP3967M , FG0088 , FG0092 , M3246754 , MPA30032 , MU1746 , MU1748 , P0032M , SP6148M , SP6152M , TU422 , USEP3967M

Qty:

In Stock & Ready to Ship

Best Price: $151.86

Fuel Pump Module Assembly
with Turbine Pump Technology with Code # GFL, GFN on Module ; Includes Tank Seal, Connectors, and Wire Harness
Product Attributes:
- Connector Color: White
- Connector Gender: Female
- Connector Shape: Oval
- Fuel Filter Included: No
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: Yes
- Grade Type: Regular
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Minimum Pressure: 60.0
- Mounting Hardware Included: No
- Negative Ground: Yes
- Outlet Outside Diameter: 9.5
- Pump Type: Electric
- Regulator Included: No
- Resistance Ohms Empty: 40.0
- Resistance Ohms Full: 250.0
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type:
  - Blade
  - Spade
- Top Mount Diameter: 104.0
- Voltage: 12v
- Wire Harness Included: Yes
- Wire Quantity: 4
- Wiring Harness Length: 445.0
The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.

Brand: Carter

Vehicle	Block	Engine	CID	CC
1999 - Chevrolet C1500 Suburban	V	8 Cyl 5.7L	350	-

Fuel Pump Module Assembly Holley

Part # P311-52782C4 Manu # 12-147 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $681.57

Drop In Fuel Pump Module Assembly
Drop In Fuel Pump Module Assembly; Dual Pumps; Free Flow LPH 450; 8AN Inlet/10 AN Outlet; For Use w/12 Bolt Flange Fuel Cells;
Product Attributes:
- Flange Type: 12 Bolt
- Free Flow GPH: 230
- Fuel Type:
  - E85
  - Gasoline
- Fully Open: 900
- Inlet Size: 8an
- Maximum PSI: 87
- Outlet Size: 10an
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Complete Drop-In Fuel Module Assembly
- Billet Top Flange Housing
- Pump Depth Is Fully Adjustable For Fitment
Updating your racing fuel system to EFI is so simple! Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single and dual 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 1750 EFI or 2200 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw)

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-5E83093 Manu # 12-146 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $563.62

Fuel Cell EFI Pump Module Assembly
Fuel Cell EFI Pump Module Assembly; 12 Bolt Flange; 450 LPH Drop-In Module; 8AN Inlet/10AN Outlet;
Product Attributes:
- Flange Type: 12 Bolt
- Free Flow GPH: 118
- Fuel Type:
  - E85
  - Gasoline
- Fully Open: 450
- Inlet Size: 8an
- Maximum PSI: 87
- Outlet Size: 10an
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Update Your Fuel Cell To EFI The Easy Way
- Designed To Drop Right In Your Existing 6/12 Bolt Flange
- Billet Top Flange Housing
- Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
Updating your racing fuel system to EFI is so simple! Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw)

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-5707EB8 Manu # 19-370 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $399.93

Fuel Cell EFI Pump Module Assembly
Fuel Cell EFI Pump Module Assembly; Return Style; 6-Bolt Flange; 340 LPH Drop-In Module; 6AN Inlet/6AN Outlet;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Update Your Fuel Cell To EFI The Easy Way
- Designed To Drop Right In Your Existing 6/12 Bolt Flange
- Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
Updating your racing fuel system to EFI is so simple! Sniper is introducing their latest Diecast Fuel Cell EFI Pump Modules. The modules were designed to drop in as a direct replacement for your existing 6 bolt flange fuel cell cap assembly. The diecast aluminum top flange includes an 6AN inlet port, a 6AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 340 LPH fuel pumps in both return and returnless system designs. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 700 EFI or 900 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw)

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-13FC370 Manu # 19-380 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $399.93

Fuel Cell EFI Pump Module Assembly
Fuel Cell EFI Pump Module Assembly; Return Style; 12-Bolt Flange; 340 LPH Drop-In Module; 6AN Inlet/6AN Outlet;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Update Your Fuel Cell To EFI The Easy Way
- Designed To Drop Right In Your Existing 6/12 Bolt Flange
- Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
Updating your racing fuel system to EFI is so simple! Sniper is introducing their latest Diecast Fuel Cell EFI Pump Modules. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The diecast aluminum top flange includes an 6AN inlet port, a 6AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 340 LPH fuel pumps in both return and returnless system designs. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 700 EFI or 900 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw)

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-20C92DE Manu # 12-144 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $504.51

Fuel Cell EFI Pump Module Assembly
Fuel Cell EFI Pump Module Assembly; 12 Bolt Flange; 255 LPH Drop-In Module; 8AN Inlet/10AN Outlet;
Product Attributes:
- Flange Type: 12 Bolt
- Free Flow GPH: 67
- Fuel Type: Gasoline
- Fully Open: 255
- Inlet Size: 8an
- Maximum PSI: 80
- Outlet Size: 10an
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Update Your Fuel Cell To EFI The Easy Way
- Designed To Drop Right In Your Existing 6/12 Bolt Flange
- Billet Top Flange Housing
- Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
Updating your racing fuel system to EFI is so simple! Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 550 EFI or 700 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw)

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Delphi

Part # P311-1AC5F71 Manu # FG1483 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 3924710C1 , EFG1483

Qty:

In Stock & Ready to Ship

Best Price: $259.10

Fuel Pump Module Assembly
Product Attributes:
- Average Current Draw: 10
- Average Flow Rating: 46
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pressure: 80.0
- Notes: Used On 2012 F64 Navistar
- Outlet Outside Diameter: 0.375
- Outlet Quantity: 2
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 180.0
- Resistance Ohms Full: 10.0
- Strainer Included: Yes
- System Pressure: 54 Psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Vapor Pressure Sensor: Yes
- Voltage: 13.0
100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Delphi

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-1236054 Manu # 12-132 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $700.88

In-Tank Retrofit Fuel Module
In-Tank Retrofit Fuel Module; 450 LPH; Install In Any Tank From 7 in. to 12 in. Deep;
Product Attributes:
- Diameter (in.): 4.800 In.
- Fuel Type:
  - E85
  - Gasoline
- Fully Open: 450
- Material: Billet Aluminum
- Thread Size: 1/4npt
- WARNING CA Proposition 65: No
Features:
- Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
- The Low Profile Design For Added Clearance When Needed
- Clamping System Allows You To Locate Module Anywhere In The Tank
- 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
- Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
- Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
- 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile 5 inch diameter design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-5698221 Manu # 19-355 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $618.78

In-Tank Retrofit Fuel Module
In-Tank Retrofit Fuel Module; 340 LPH; Return Style; Install In Any Tank From 7 in. To 12 in. Deep; Includes Filter Socks;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Billet/Anodized/Laser Etched Flanges With 8An ORB Return/Outlet And 6An Orb Vent
- Allows You To Locate The Module Nearly Anywhere In The Tank While Retaining
- The Clamping System Allows You To Rotate The Unit 360 Degrees For Easier Clocking Of The Plumbing And Wiring
- Easy Install Just Drill A 4 in. Hole In The Top Of The Tank Then Use Hand Tools
- E85 Compatible
- The Dual Pump Design Allows The Pumps To Be Ran Together Or The Second Pump Can Be Triggered Additionally
- Units Install In Tanks From 7 To 12 in. Deep
- Filter Socks Included/Hydramats Can Be Purchased Separately
Looking to make a serious step up in the horsepower department? The Holley Dual 3400 LPH EFI Pump Module would be an excellent choice. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator.The innovative clamping system allows you to locate the module nearly anywhere in the tank while retaining your factory fuel level sending unit. The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-3FEFDF7 Manu # 12-130 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $766.77

In-Tank Retrofit Fuel Module
In-Tank Retrofit Fuel Module; 255 LPH; Install In Any Tank From 6.5 in. to 12 in. Deep;
Product Attributes:
- Diameter (in.): 4.800 In.
- Fully Open: 255
- Material: Billet Aluminum
- Thread Size: 1/4npt
- WARNING CA Proposition 65: No
Features:
- Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
- The Low Profile Design For Added Clearance When Needed
- Clamping System Allows You To Locate Module Anywhere In The Tank
- 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
- Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
- Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
- 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-21B9318 Manu # 12-141 Condition: New

Qty:

In Stock & Ready to Ship

Fuel Cell EFI Pump Module Assembly
Fuel Cell EFI Pump Module Assembly; 6 Bolt Flange; 450 LPH Drop-In Module; 8AN Inlet/10AN Outlet;
Product Attributes:
- Flange Type: 6 Bolt
- Free Flow GPH: 118
- Fuel Type:
  - E85
  - Gasoline
- Fully Open: 450
- Inlet Size: 8an
- Maximum PSI: 87
- Outlet Size: 10an
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Update Your Fuel Cell To EFI The Easy Way
- Designed To Drop Right In Your Existing 6/12 Bolt Flange
- Billet Top Flange Housing
- Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
Updating your racing fuel system to EFI is so simple! Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 6 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw)

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-15888C6 Manu # 12-139 Condition: New

Qty:

In Stock & Ready to Ship

Fuel Cell EFI Pump Module Assembly
Fuel Cell EFI Pump Module Assembly; 6 Bolt Flange; 255 LPH Drop-In Module; 8AN Inlet/10AN Outlet;
Product Attributes:
- Flange Type: 6 Bolt
- Free Flow GPH: 67
- Fuel Type: Gasoline
- Fully Open: 255
- Inlet Size: 8an
- Maximum PSI: 80
- Outlet Size: 10an
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Update Your Fuel Cell To EFI The Easy Way
- Designed To Drop Right In Your Existing 6/12 Bolt Flange
- Billet Top Flange Housing
- Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
Updating your racing fuel system to EFI is so simple! Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 6 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 550 EFI or 700 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw)

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Finish Selecting Your Vehicle to Shop For Your Fuel Pump Module

Shop By Brand

Shop By Related Fuel Pump Module Assembly Parts

Shop for Top Selling Genuine Chevrolet C1500 Suburban Fuel Pump Modules

Shop Chevrolet C1500 Suburban Fuel Pump Modules

Finish Selecting Your Vehicle to Shop For Your Fuel Pump Module

Shop By Brand

Shop By Related Fuel Pump Module Assembly Parts

Shop for Top Selling Genuine Chevrolet C1500 Suburban Fuel Pump Modules