Finish Selecting Your Vehicle to Shop For Your Fuel Injection Throttle Body

Choose a Year for your Volvo 's Fuel Injection Throttle Body

  • 2013
  • 2012
  • 2011
  • 2010
  • 2009
  • 2008
  • 2007
  • 2006
  • 2005
  • 2004
  • 2003
  • 2002
  • 2001
  • 2000
  • 1999

Shop By Brand

The Following brands are available based on your search.

  • Beck Arnley
    Beck Arnley
  • Bosch
    Bosch
  • Cardone
    Cardone
  • Dorman
    Dorman
  • Genuine
    Genuine
  • Professional Parts Sweden
    Professional Parts Sweden
  • Standard Ignition
    Standard Ignition
  • Vemo
    Vemo

Best Selling Genuine Volvo Fuel Injection Throttle Bodies

  • We Stock the following top leading brands, including Dorman, Beck Arnley, Genuine, Standard Ignition, Professional Parts Sweden, Bosch, Vemo, Cardone
  • Constantly Updated Inventory of Volvo Replacement Fuel Injection Throttle Body Parts

We stock Fuel Injection Throttle Body parts for most Volvo models, including C30, C70, S40, S60, S70, S80, V50, V70, XC70, XC90.


Dorman
2002 Volvo C70 Fuel Injection Throttle Body 5 Cyl 2.4L Dorman

P311-318E7E8    977-354  New

8677867 , S20160 , TB1123

Qty:
In Stock & Ready to Ship
$358.01
Dorman Fuel Injection Throttle Body
  • Product Attributes:
    • Adjustable: No
    • Bore Diameter: 2.33
    • Connector/Terminal Type: Pin
    • Electrical Connection Type: Female Socket
    • Fuel Injectors Included: No
    • Fuel System Type: Gas
    • Idle Air Control Motor Included: No
    • Inlet Quantity: 0
    • Installation Hardware Included: No
    • Outlet Quantity: 0
    • Terminal Count: 6
    • Throttle Body Finish: Metal
    • Throttle Body Mounted: No
    • Throttle Body Spacer Included: No
    • Throttle Body Type: Electronic
    • Throttle Position Sensor Included: Yes
    • Venturi Quantity: 0
Brand: Dorman
Additional Fitment Information:
Vehicle Engine Designation Block Engine CID CC
2002 - Volvo C70 B5244T L 5 Cyl 2.4L - 2435
Beck Arnley
2002 Volvo V70 Fuel Injection Throttle Body 5 Cyl 2.4L Beck Arnley

P311-2012915    154-0150  New

Qty:
In Stock & Ready to Ship
$308.87
Beck Arnley Fuel Injection Throttle Body
  • THROTTLE BODY
  • APPLICATION SPECIFIC FOR THIS VEHICLE
  • Product Attributes:
    • ORDER MULTIPLE: 1
  • Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Brand: Beck Arnley
Additional Fitment Information:
Vehicle Block Engine CID CC
2002 - Volvo V70 L 5 Cyl 2.4L - 2435
Genuine
2005 Volvo S40 Fuel Injection Throttle Body Genuine

P311-52F55A2    30711552  New

Qty:
In Stock & Ready to Ship
$753.26
Brand: Genuine
Additional Fitment Information:
Vehicle Submodel
2005 - Volvo S40 T5
Genuine
2000 Volvo V70 Fuel Injection Throttle Body Genuine

P311-1255D42    36050563  New

Qty:
In Stock & Ready to Ship
$100.00 $595.55
Genuine Fuel Injection Throttle Body
  • ; SOFTWARE UPDATE REQUIRED AFTER INSTALLATION OR UNIT WILL NOT FUNCTION PROPERLYNO Warranty w/o proper information. The following MUST BE Provided: VIN, Mileage, Fault Code Triggered, Copies of Repair Orders for Initial Installation and Warranty Repair. VIDA SOFTWARE UPGRADE NEEDED TO COMPLETE INSTALLATION
Brand: Genuine
Additional Fitment Information:
Vehicle
2000 - Volvo V70
Genuine
2002 Volvo V70 Fuel Injection Throttle Body 5 Cyl 2.4L Genuine

P311-593C3A6    36050564  New

Qty:
In Stock & Ready to Ship
$100.00 $656.88
Genuine Fuel Injection Throttle Body
  • ; NO Warranty w/o proper information. The following MUST BE Provided: VIN, Mileage, Fault Code Triggered, Copies of Repair Orders for Initial Installation and Warranty Repair. SOFTWARE UPDATE REQUIRED AFTER INSTALLATION OR UNIT WILL NOT FUNCTION PROPERLY
Brand: Genuine
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
2002 - Volvo V70 Base L 5 Cyl 2.4L - 2435
Standard Ignition
2005 Volvo S60 Fuel Injection Throttle Body Standard Ignition

P311-19E8407    S20160  New

0280750131 , 601-90041 , 67-5201 , 8677867 , 977-354 , TB1123 , V95-81-0003

Qty:
In Stock & Ready to Ship
$435.36
Standard Ignition Fuel Injection Throttle Body
  • Fuel Injection Throttle Body
  • Product Attributes:
    • Connector Gender: Female
    • Terminal Gender: Male
    • Terminal Quantity: 6
    • Terminal Type: Pin
  • 100% NEW, never remanufactured, which maximizes performance and extends service life. Undergoes extensive testing to ensure quality and reliability out of the box. Matches OE response time for peak performance on drive by wire systems. All TechSmart® parts meet or exceed OE performance, providing today's technician with the quality parts needed to get the job done right, the first time.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle Aspiration
2005 - Volvo S60 Turbocharged
Professional Parts Sweden
2003 Volvo C70 Fuel Injection Throttle Body Professional Parts Sweden

P311-4FF964D    W0133-1661396  New

Qty:
In Stock & Ready to Ship
$262.49
Professional Parts Sweden Fuel Injection Throttle Body
  • Bosch and Pro Parts advise that their throttle body is "plug 'n play" (no reflash should be necessary). The VEMO throttle body (or the related engine system) may require programming to complete the installation (please refer to the appropriate service info). Also, note that there is the possibility of scuff marks around the mounting bolt holes on the throttle body. These are the result of testing at final assembly and are not an indication of previous use.
Brand: Professional Parts Sweden
Additional Fitment Information:
Vehicle
2003 - Volvo C70
Bosch
2003 Volvo C70 Fuel Injection Throttle Body Bosch

P311-535C3A1    W0133-1661396  New

Qty:
In Stock & Ready to Ship
$559.31
Bosch Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Bosch and Pro Parts advise that their throttle body is "plug 'n play" (no reflash should be necessary). The VEMO throttle body (or the related engine system) may require programming to complete the installation (please refer to the appropriate service info). Also, note that there is the possibility of scuff marks around the mounting bolt holes on the throttle body. These are the result of testing at final assembly and are not an indication of previous use.
Brand: Bosch
Additional Fitment Information:
Vehicle
2003 - Volvo C70
Vemo
2007 Volvo S60 Fuel Injection Throttle Body Vemo

P311-0E5D0FA    W0133-1661396  New

Qty:
In Stock & Ready to Ship
$439.65
Vemo Fuel Injection Throttle Body
  • Bosch and Pro Parts advise that their throttle body is "plug 'n play" (no reflash should be necessary). The VEMO throttle body (or the related engine system) may require programming to complete the installation (please refer to the appropriate service info). Also, note that there is the possibility of scuff marks around the mounting bolt holes on the throttle body. These are the result of testing at final assembly and are not an indication of previous use.
Brand: Vemo
Additional Fitment Information:
Vehicle
2007 - Volvo S60
Professional Parts Sweden
2008 Volvo S60 Fuel Injection Throttle Body Professional Parts Sweden

P311-4FF964D    W0133-1661396  New

Qty:
In Stock & Ready to Ship
$262.49
Professional Parts Sweden Fuel Injection Throttle Body
Brand: Professional Parts Sweden
Additional Fitment Information:
Vehicle
2008 - Volvo S60
Bosch
2003 Volvo XC70 Fuel Injection Throttle Body Bosch

P311-535C3A1    W0133-1661396  New

Qty:
In Stock & Ready to Ship
$559.31
Bosch Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Bosch
Additional Fitment Information:
Vehicle
2003 - Volvo XC70
Cardone
2008 Volvo C30 Fuel Injection Throttle Body 5 Cyl 2.5L Cardone - Fuel Injection Throttle Body

P311-129466A    67-5200  Remanufactured

30711552 , 8687927

Qty:
In Stock & Ready to Ship
$3.60 $362.53
Cardone Fuel Injection Throttle Body
  • Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
  • Fuel Injection Throttle Body
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • How Do You Clean?
      • How Do You Test?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
      • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
      • What Causes The Electronic Throttle Body To Fail?
      • What Do You Replace?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
    • Features and Benefits:
      • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
      • Each Unit Is Guaranteed To Function Like The Original.
      • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
    • First Application Year: 2004
    • Housing Color/Finish: Gray/unfinished
    • Idle Air Control Motor Included: No
    • Product Condition: Remanufactured
    • Throttle Body Actuation Type: Electric
    • Throttle Body Inlet Shape: Round
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
  • Every CARDONE® Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2008 - Volvo C30 L 5 Cyl 2.5L 154 2521
Cardone
2005 Volvo S80 Fuel Injection Throttle Body 5 Cyl 2.5L Cardone - Fuel Injection Throttle Body

P311-08D01BB    67-5201  Remanufactured

30650013 , 30711554 , 8677657 , 8677866

Qty:
In Stock & Ready to Ship
$58.50 $825.72
Cardone Fuel Injection Throttle Body
  • Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
  • Fuel Injection Throttle Body
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • How Do You Clean?
      • How Do You Test?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
      • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
      • What Causes The Electronic Throttle Body To Fail?
      • What Do You Replace?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
    • Features and Benefits:
      • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
      • Each Unit Is Guaranteed To Function Like The Original.
      • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
    • First Application Year: 2002
    • Housing Color/Finish: Gray /unfinished
    • Idle Air Control Motor Included: No
    • Product Condition: Remanufactured
    • Throttle Body Actuation Type: Electric
    • Throttle Body Inlet Shape: Round
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
  • Every CARDONE® Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2005 - Volvo S80 L 5 Cyl 2.5L 154 2521
Cardone
2004 Volvo S60 Fuel Injection Throttle Body Cardone - Fuel Injection Throttle Body

P311-08D01BB    67-5201  Remanufactured

Qty:
In Stock & Ready to Ship
$58.50 $825.72
Cardone Fuel Injection Throttle Body
  • I.D. #(s) 30711554 Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
  • Fuel Injection Throttle Body
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • How Do You Clean?
      • How Do You Test?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
      • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
      • What Causes The Electronic Throttle Body To Fail?
      • What Do You Replace?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
    • Features and Benefits:
      • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
      • Each Unit Is Guaranteed To Function Like The Original.
      • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
    • First Application Year: 2002
    • Housing Color/Finish: Gray /unfinished
    • Idle Air Control Motor Included: No
    • Product Condition: Remanufactured
    • Throttle Body Actuation Type: Electric
    • Throttle Body Inlet Shape: Round
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
  • Every CARDONE® Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Aspiration
2004 - Volvo S60 Turbocharged
Cardone
2005 Volvo V70 Fuel Injection Throttle Body Cardone - Fuel Injection Throttle Body

P311-0E24ACC    67-5202  Remanufactured

30711553

Qty:
In Stock & Ready to Ship
$17.10 $163.85
Cardone Fuel Injection Throttle Body
  • I.D. #(s) 30711553 Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
  • Fuel Injection Throttle Body
  • Product Attributes:
    • Bore Diameter (mm): 64.00
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • How Do You Clean?
      • How Do You Test?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
      • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
      • What Causes The Electronic Throttle Body To Fail?
      • What Do You Replace?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
    • Features and Benefits:
      • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
      • Each Unit Is Guaranteed To Function Like The Original.
      • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
    • First Application Year: 2002
    • Housing Color/Finish: Gray
    • Idle Air Control Motor Included: No
    • Inlet Diameter (mm): 70.00
    • Original Equipment Replacement: Yes
    • Outlet Diameter (mm): 65
    • Product Condition: Remanufactured
    • Throttle Body Type: Electric
    • Throttle Body Actuation Type: Electric
    • Throttle Body Finish: Natural
    • Throttle Body Inlet Shape: Round
    • Throttle Body Material: Plastic, Steel, Aluminum
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
    • Venturi Quantity: 1
  • Every CARDONE® Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Aspiration
2005 - Volvo V70 Turbocharged
Professional Parts Sweden
2003 Volvo S60 Fuel Injection Throttle Body Professional Parts Sweden

P311-230BBA9    23431554  New

Qty:
In Stock & Ready to Ship
$174.16
Professional Parts Sweden Fuel Injection Throttle Body
  • ; Incl.Electronic Throttle Body Actuator
Brand: Professional Parts Sweden
Additional Fitment Information:
Vehicle Submodel
2003 - Volvo S60 AWD