802.589.0911 Live Chat With Us

Finish Selecting Your Vehicle to Shop For Your Fuel Injection Throttle Body

Choose a Year for your Scion xB 's Fuel Injection Throttle Body

  • 2015
  • 2014
  • 2013
  • 2012
  • 2011
  • 2010
  • 2009
  • 2008

Shop By Brand

The Following brands are available based on your search.

  • Aisan
    Aisan
  • Cardone
    Cardone
  • Dorman
    Dorman

Shop By Related Fuel Injection Throttle Body Parts

Shop below for all Fuel Injection Throttle Body related parts for your Scion xB


Shop for Top Selling Genuine Scion Xb Fuel Injection Throttle Bodies

  • We Stock the following top leading brands, including Aisan, Cardone, Dorman
  • Constantly Updated Inventory of Scion Xb Replacement Fuel Injection Throttle Body Parts

We also have Fuel Injection Throttle Body parts for other Scion models, including iM, tC, xB, xD.

Aisan
2008 Scion xB Fuel Injection Throttle Body Aisan - with Gasket - SEE TSB

P311-56F0829    W0133-1922694  New

Qty:
$417.46
Aisan Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • OE Replacement
  • Production: 03/01/2007-, with Motor
  • with Gasket - SEE TSB
Brand: Aisan
Free Ground Shipping on this item
Additional Fitment Information:
Vehicle Prod. Date Range
2008 - Scion xB Fr:03-01-07
Aisan
2008 Scion xB Fuel Injection Throttle Body Aisan - w/o Gasket - SEE TSB

P311-56F0829    W0133-1922694  New

Qty:
$417.46
Aisan Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • OE Replacement
  • Production: 03/01/2007-, with Motor
  • This throttle body has 3 hose fittings and will replace the 4-hose throttle body found on some vehicles. The drain hose fitting (lowest position of the 4 hose fittings) has been eliminated from this throttle body. If installing this throttle body in place of a 4-hose throttle body, the hose that would normally connect to the drain hose fitting should be removed and discarded. Refer to Toyota factory service bulletin #TSB-0111-10 for more information on this revision.
  • w/o Gasket - SEE TSB
Brand: Aisan
Free Ground Shipping on this item
Additional Fitment Information:
Vehicle Prod. Date Range
2008 - Scion xB Fr:03-01-07
Aisan
2009 Scion xB Fuel Injection Throttle Body Aisan - with Gasket - SEE TSB

P311-56F0829    W0133-1922694  New

Qty:
$417.46
Aisan Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • OE Replacement
  • with Motor
  • with Gasket - SEE TSB
Brand: Aisan
Free Ground Shipping on this item
Additional Fitment Information:
Vehicle
2009 - Scion xB
Aisan
2009 Scion xB Fuel Injection Throttle Body Aisan - w/o Gasket - SEE TSB

P311-56F0829    W0133-1922694  New

Qty:
$417.46
Aisan Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • OE Replacement
  • with Motor
  • This throttle body has 3 hose fittings and will replace the 4-hose throttle body found on some vehicles. The drain hose fitting (lowest position of the 4 hose fittings) has been eliminated from this throttle body. If installing this throttle body in place of a 4-hose throttle body, the hose that would normally connect to the drain hose fitting should be removed and discarded. Refer to Toyota factory service bulletin #TSB-0111-10 for more information on this revision.
  • w/o Gasket - SEE TSB
Brand: Aisan
Free Ground Shipping on this item
Additional Fitment Information:
Vehicle
2009 - Scion xB
Aisan
2013 Scion xB Fuel Injection Throttle Body Aisan - with Gasket - SEE TSB

P311-56F0829    W0133-1922694  New

Qty:
$417.46
Aisan Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • OE Replacement
  • Incl.Electronic Throttle Body Actuator
  • with Gasket - SEE TSB
Brand: Aisan
Free Ground Shipping on this item
Additional Fitment Information:
Vehicle
2013 - Scion xB
Aisan
2013 Scion xB Fuel Injection Throttle Body Aisan - w/o Gasket - SEE TSB

P311-56F0829    W0133-1922694  New

Qty:
$417.46
Aisan Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • OE Replacement
  • Incl.Electronic Throttle Body Actuator
  • This throttle body has 3 hose fittings and will replace the 4-hose throttle body found on some vehicles. The drain hose fitting (lowest position of the 4 hose fittings) has been eliminated from this throttle body. If installing this throttle body in place of a 4-hose throttle body, the hose that would normally connect to the drain hose fitting should be removed and discarded. Refer to Toyota factory service bulletin #TSB-0111-10 for more information on this revision.
  • w/o Gasket - SEE TSB
Brand: Aisan
Free Ground Shipping on this item
Additional Fitment Information:
Vehicle
2013 - Scion xB
Aisan
2008 Scion xB Fuel Injection Throttle Body Aisan - w/o Gasket - SEE TSB

P311-56F0829    W0133-1922694  New

Qty:
$417.46
Aisan Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • OE Replacement
  • Production: 03/01/2007-, with Motor
  • w/o Gasket - SEE TSB
Brand: Aisan
Free Ground Shipping on this item
Additional Fitment Information:
Vehicle Prod. Date Range
2008 - Scion xB Fr:03-01-07
Aisan
2009 Scion xB Fuel Injection Throttle Body Aisan - w/o Gasket - SEE TSB

P311-56F0829    W0133-1922694  New

Qty:
$417.46
Aisan Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • OE Replacement
  • with Motor
  • w/o Gasket - SEE TSB
Brand: Aisan
Free Ground Shipping on this item
Additional Fitment Information:
Vehicle
2009 - Scion xB
Aisan
2013 Scion xB Fuel Injection Throttle Body Aisan - w/o Gasket - SEE TSB

P311-56F0829    W0133-1922694  New

Qty:
$417.46
Aisan Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • OE Replacement
  • Incl.Electronic Throttle Body Actuator
  • w/o Gasket - SEE TSB
Brand: Aisan
Free Ground Shipping on this item
Additional Fitment Information:
Vehicle
2013 - Scion xB
Cardone
2015 Scion xB Fuel Injection Throttle Body 4 Cyl 2.4L Cardone - Reman. A-1 CARDONE Throttle Body

P311-2C0A3FF    67-8001  Remanufactured

220300H031

Qty:
$26.10 $131.57
Cardone Fuel Injection Throttle Body
  • Remanufactured Throttle Body
  • Reman. A-1 CARDONE Throttle Body
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • How Do You Clean?
      • How Do You Test?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
      • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
      • What Causes The Electronic Throttle Body To Fail?
      • What Do You Replace?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
    • Features and Benefits:
      • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
      • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
      • Each Unit Is Guaranteed To Fit And Function Like The Original — At A Fraction Of The Typical Market Price.
      • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
    • Housing Color/Finish: Gray/unfinished
    • Housing Material: Aluminum
    • Package Contents: Throttle Body, Instruction Sheet
    • Product Condition: Remanufactured
    • Throttle Body Actuation Type: Electric
    • Throttle Body Inlet Shape: Round
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
  • Every CARDONE Electronic Throttle Body is first disassembled and meticulously inspected. Then, each component is inspected, remanufactured or replaced, resulting in reliable and consistent performance. Every ETB is tested for all critical functions, including response time and airflow at multiple points. A proprietary cleaning process prevents the throttle bore surface from being deformed, ensuring optimum airflow and peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block CC CID
2015 - Scion xB L 2362 -
Dorman
2008 Scion xB Fuel Injection Throttle Body - N/A 4 Cyl 2.4L Dorman

P311-4C1B5D3    977-339  New

S20097

Qty:
$222.48
Dorman Fuel Injection Throttle Body  N/A
  • Product Attributes:
    • Adjustable: No
    • Bore Diameter: 2.4 In.
    • California Proposition 65: Warning: Cancer And Reproductive Harm ?Çô Www.p65warnings.ca.gov
    • Color/Finish: Metal
    • Connector/Terminal Type: Blade
    • Electrical Connection Type: Female Socket
    • Fuel Injectors Included: No
    • Fuel System Type: Gas
    • Gasket or Seal Included: No
    • Idle Air Control Motor Included: No
    • Inlet Quantity: 0
    • Installation Hardware Included: No
    • Outlet Quantity: 0
    • Package Contents: 1 Fuel Injection Throttle Body
    • Terminal Count: 6
    • Throttle Body Mounted: No
    • Throttle Body Spacer Included: No
    • Throttle Body Type: Electronic
    • Throttle Position Sensor Included: Yes
    • Venturi Quantity: 0
Brand: Dorman
Position: N/A
Additional Fitment Information:
Vehicle Block CC CID Position
2008 - Scion xB L 2362 - N/A
Cardone
2015 Scion xB Fuel Injection Throttle Body 4 Cyl 2.4L Cardone - New CARDONE SELECT Throttle Body

P311-5212714    6E-8001  New

220300H020 , 220300H030 , 220300H031 , 2203028060 , 2203028061 , 2203028070 , 2203028071

Qty:
$138.26
Cardone Fuel Injection Throttle Body
  • New Throttle Body
  • New CARDONE SELECT Throttle Body
  • Product Attributes:
    • Bore Diameter (in/mm): 55mm
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Are Your New Throttle Bodies The Same Design As Oe?
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No, Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The New Electronic Throttle Body Is Designed And Manufactured To Meet Oe Manufacturer Standards.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • What Causes The Electronic Throttle Body To Fail?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
      • When Installing The New Electronic Throttle Body There Is No Need To Modify The Vehicle For Installation.
      • Will I Have To Modify Anything On The Vehicle To Install Your New Throttle Body?
    • Features and Benefits:
      • 100% Computerized Testing Of Motor, Throttle Position Sensor And Articulation Ensures Reliable And Consistent Performance.
      • Critical Components Used In Manufacturing The New Electronic Throttle Body, Including The Housing, Throttle Plate, Position Sensors, Throttle Actuator Motor And Throttle Plate Return Spring Conform To O.e. Dimensions.
      • Each Throttle Body Is Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points, Which Helps To Guarantee A Consistently Optimal Fuel/air Ratio.
      • Each Unit Is Guaranteed To Fit And Function Like The Original.
    • Housing Color/Finish: Gray/finished
    • Housing Material: Aluminum
    • Idle Air Control Motor Included: No
    • Inlet Diameter (in/mm): 65mm
    • Inlet Type: Round
    • Original Equipment Replacement: Yes
    • Outlet Diameter (in/mm): 56mm
    • Outlet Type: Round
    • Package Contents: Etb, Instruction Sheet
    • Product Condition: New
    • Throttle Body Type: Electric
    • Throttle Body Actuation Type: Electric
    • Throttle Body Finish: Finished
    • Throttle Body Inlet Shape: Round
    • Throttle Body Material: Aluminum, Steel, Plastic
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
    • Venturi Quantity: 1
  • Because of the exacting standards of our proprietary reverse-engineering processes, all CARDONE Electronic Throttle Bodies are guaranteed to fit and function like the original. Critical components such as the ETB housing, throttle plate, position sensors, and throttle actuator motor, all conform to the specifications and dimensions as designed by the OE Manufacturer – meaning each ETB is guaranteed to last and perform consistently under all driving conditions.
Brand: Cardone
Additional Fitment Information:
Vehicle Block CC CID
2015 - Scion xB L 2362 -