Shop for Discount Auto Parts, Replacement and Performance Parts and Accessories

2003 Nissan Maxima Fuel Injection Throttle Body Hitachi

Part # P311-112FEA9 Manu # W0133-1929947 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $300.56

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Brand: Hitachi

Vehicle
2003 - Nissan Maxima

2014 Nissan Altima Fuel Injection Throttle Body 4 Cyl 2.5L Aisan

Part # P311-080F150 Manu # W0133-2021840 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $512.48

OE Replacement
Includes Electronic Throttle Body Actuator. This product and/or the vehicle system(s) may require programming to complete the installation. Please refer to the Factory Service Information.

Brand: Aisan

Vehicle	Block	Engine	CID	CC
2014 - Nissan Altima	L	4 Cyl 2.5L	152	2488

2011 Nissan Frontier Fuel Injection Throttle Body 6 Cyl 4.0L Aisan

Part # P311-4CE1504 Manu # W0133-2021841 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $588.80

OE Replacement
Includes the Electronic Throttle Body Actuator . This product and/or the vehicle system(s) may require programming to complete the installation. Please refer to the Factory Service Information.

Brand: Aisan

Vehicle	Block	Engine	CID	CC
2011 - Nissan Frontier	V	6 Cyl 4.0L	-	3954

2005 Nissan Pathfinder Fuel Injection Throttle Body Aisan

Part # P311-4CE1504 Manu # W0133-2021841 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $588.80

OE Replacement
Production: 08/01/2004-
Includes the Electronic Throttle Body Actuator . This product and/or the vehicle system(s) may require programming to complete the installation. Please refer to the Factory Service Information.

Brand: Aisan

Vehicle	Prod. Date Range
2005 - Nissan Pathfinder	Fr:08-01-04

2005 Nissan Xterra Fuel Injection Throttle Body Aisan

Part # P311-4CE1504 Manu # W0133-2021841 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $588.80

OE Replacement
Production: 01/01/2005-
Includes the Electronic Throttle Body Actuator . This product and/or the vehicle system(s) may require programming to complete the installation. Please refer to the Factory Service Information.

Brand: Aisan

Vehicle	Prod. Date Range
2005 - Nissan Xterra	Fr:01-01-05

2005 Nissan Frontier Fuel Injection Throttle Body 6 Cyl 4.0L Aisan

Part # P311-4CE1504 Manu # W0133-2021841 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $588.80

OE Replacement
Production: 10/01/2004-
Includes the Electronic Throttle Body Actuator . This product and/or the vehicle system(s) may require programming to complete the installation. Please refer to the Factory Service Information.

Brand: Aisan

Vehicle	Block	Engine	CID	CC	Prod. Date Range
2005 - Nissan Frontier	V	6 Cyl 4.0L	-	3954	Fr:10-01-04

2004 Nissan Altima Fuel Injection Throttle Body 4 Cyl 2.5L Hitachi

Part # P311-0A66328 Manu # W0133-1795106 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $288.13

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Brand: Hitachi

Vehicle	Block	Engine	CID	CC
2004 - Nissan Altima	L	4 Cyl 2.5L	152	2488

2006 Nissan Sentra Fuel Injection Throttle Body 4 Cyl 2.5L Hitachi

Part # P311-0A66328 Manu # W0133-1795106 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $288.13

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Production: -08/31/2006

Brand: Hitachi

Vehicle	Block	Engine	CID	CC	Prod. Date Range
2006 - Nissan Sentra	L	4 Cyl 2.5L	152	2488	To:08-31-06

2005 Nissan X-Trail Fuel Injection Throttle Body Hitachi

Part # P311-0A66328 Manu # W0133-1795106 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $288.13

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Production: 03/01/2004-

Brand: Hitachi

Vehicle	Prod. Date Range
2005 - Nissan X-Trail	Fr:03-01-04

2007 Nissan Altima Fuel Injection Throttle Body 4 Cyl 2.5L Hitachi

Part # P311-0D22320 Manu # W0133-1964077 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $273.89

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Production: 10/01/2006-
This product and/or the vehicle system(s) may require programming to complete the installation. Please refer to the Factory Service Information. The throttle body gasket is serviced separately.

Brand: Hitachi

Vehicle	Block	Engine	CID	CC	Prod. Date Range
2007 - Nissan Altima	L	4 Cyl 2.5L	152	2488	Fr:10-01-06

2002 Nissan Altima Fuel Injection Throttle Body 4 Cyl 2.5L Hitachi

Part # P311-0A66328 Manu # W0133-1795106 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $288.13

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
The throttle body mount gasket (outlet) is serviced separately. This product and/or the vehicle system(s) may require programming to complete the installation. Please refer to the Factory Service Information

Brand: Hitachi

Vehicle	Block	Engine	CID	CC
2002 - Nissan Altima	L	4 Cyl 2.5L	152	2488

2003 Nissan Sentra Fuel Injection Throttle Body 4 Cyl 2.5L Hitachi

Part # P311-0A66328 Manu # W0133-1795106 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $288.13

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Production: 07/01/2002-

Brand: Hitachi

Vehicle	Block	Engine	CID	CC	Prod. Date Range
2003 - Nissan Sentra	L	4 Cyl 2.5L	152	2488	Fr:07-01-02

2002 Nissan Sentra Fuel Injection Throttle Body 4 Cyl 2.5L Hitachi

Part # P311-0A66328 Manu # W0133-1795106 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $288.13

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Production: -06/30/2002

Brand: Hitachi

Vehicle	Block	Engine	CID	CC	Prod. Date Range
2002 - Nissan Sentra	L	4 Cyl 2.5L	152	2488	To:06-30-02

2008 Nissan Sentra Fuel Injection Throttle Body 4 Cyl 2.5L Hitachi

Part # P311-0D22320 Manu # W0133-1964077 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $273.89

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Brand: Hitachi

Vehicle	Block	Engine	CID	CC
2008 - Nissan Sentra	L	4 Cyl 2.5L	152	2488

2007 Nissan Sentra Fuel Injection Throttle Body 4 Cyl 2.5L Hitachi

Part # P311-0D22320 Manu # W0133-1964077 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $273.89

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Production: 02/01/2007-

Brand: Hitachi

Vehicle	Block	Engine	CID	CC	Prod. Date Range
2007 - Nissan Sentra	L	4 Cyl 2.5L	152	2488	Fr:02-01-07

2005 Nissan Sentra Fuel Injection Throttle Body 4 Cyl 2.5L Cardone - Fuel Injection Throttle Body

Part # P311-55C8E88 Manu # 67-0002 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 16119AE013 , 16119AE01A , 16119AE01B , 16119AE01C , 1611KAK01BRE , RM6006DR , RME6006 , RME6006CR , RME6060ER

Qty:

In Stock & Ready to Ship

Core Price: $9.90 Best Price: $124.76

Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
Fuel Injection Throttle Body
Product Attributes:
- E-Waste: Yes
- FAQs:
  - A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
  - Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
  - Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
  - Do You Sell Throttle Body Spacers?
  - How Do You Clean?
  - How Do You Test?
  - Is It Ok To Bypass The Coolant Hoses?
  - Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
  - No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
  - Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
  - Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
  - Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
  - The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
  - The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
  - The Oe Throttle Body Has Coolant Hoses Attached. What’s The Purpose?
  - The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
  - The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
  - We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
  - We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
  - We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore. For The Exterior We Use A Glass Bead Blasting Process. We Also Go Through Further Disassembly For Cleaning Of Internal Components.
  - What Causes The Electronic Throttle Body To Fail?
  - What Do You Replace?
  - What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
  - What Happens When An Electronic Throttle Body Fails?
  - What’s An Electronic Throttle Body?
  - When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
- Features and Benefits:
  - A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
  - Each Unit Is Guaranteed To Function Like The Original.
  - Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
- Housing Color/Finish: Gray/unfinished
- Housing Material: Aluminum
- Idle Air Control Motor Included: No
- Package Contents: Electronic Throttle Body, Instruction Sheet
- Product Condition: Remanufactured
- Throttle Body Actuation Type: Electric
- Throttle Body Inlet Shape: Round
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.

Brand: Cardone

Vehicle	Block	Engine	CID	CC
2005 - Nissan Sentra	L	4 Cyl 2.5L	152	2488

2006 Nissan Quest Fuel Injection Throttle Body Cardone - Fuel Injection Throttle Body

Part # P311-4E66D87 Manu # 67-0001 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 161198J103 , RME7004CR , RME7004DR

Qty:

In Stock & Ready to Ship

Core Price: $19.80 Best Price: $114.29

Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
Fuel Injection Throttle Body
Product Attributes:
- E-Waste: Yes
- FAQs:
  - A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
  - Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
  - Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
  - Do You Sell Throttle Body Spacers?
  - How Do You Clean?
  - How Do You Test?
  - Is It Ok To Bypass The Coolant Hoses?
  - Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
  - No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
  - Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
  - Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
  - Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
  - The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
  - The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
  - The Oe Throttle Body Has Coolant Hoses Attached. What’s The Purpose?
  - The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
  - The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
  - We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
  - We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
  - We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore. For The Exterior We Use A Glass Bead Blasting Process. We Also Go Through Further Disassembly For Cleaning Of Internal Components.
  - What Causes The Electronic Throttle Body To Fail?
  - What Do You Replace?
  - What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
  - What Happens When An Electronic Throttle Body Fails?
  - What’s An Electronic Throttle Body?
  - When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
- Features and Benefits:
  - A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
  - Each Unit Is Guaranteed To Function Like The Original.
  - Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
- Housing Color/Finish: Gray/unfinished
- Housing Material: Aluminum
- Idle Air Control Motor Included: No
- Package Contents: Electronic Throttle Body, Instruction Sheet
- Product Condition: Remanufactured
- Throttle Body Actuation Type: Electric
- Throttle Body Inlet Shape: Round
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.

Brand: Cardone

Vehicle
2006 - Nissan Quest

2010 Nissan Pathfinder Fuel Injection Throttle Body 8 Cyl 5.6L Aisan - w/o Gasket

Part # P311-5DE56DD Manu # W0133-2066186 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $583.21

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
OE Replacement
w/o Gasket

Brand: Aisan