Shop Volkswagen Passat EGR valves

Choose Vehicle Year

Finish Selecting Your Vehicle to Shop For Your EGR Valve

Choose a Year for your Volkswagen Passat 's EGR Valve

  • 2015
  • 2014
  • 2013
  • 2012
  • 2005
  • 2004
  • 2003
  • 2002
  • 2001
  • 2000
  • 1999
  • 1998
  • 1997
  • 1996
  • 1995
  • 1994
  • 1993
  • 1992
  • 1991
  • 1990

Shop By Brand

The Following brands are available based on your search.

  • Febi
    Febi
  • Genuine
    Genuine
  • Hella
    Hella
  • Pierburg
    Pierburg
  • Standard Ignition
    Standard Ignition
  • Valeo
    Valeo

Shop By Related EGR Valve Parts

Shop below for all EGR Valve related parts for your Volkswagen Passat

EGR Solenoid Valve Connector
EGR Solenoid Valve Connector
EGR Valve
EGR Valve
EGR Valve Adapter Gasket
EGR Valve Adapter Gasket
EGR Valve Control Solenoid
EGR Valve Control Solenoid
EGR Valve Gasket
EGR Valve Gasket
EGR Valve Motor Connector
EGR Valve Motor Connector
EGR Valve Position Sensor
EGR Valve Position Sensor
PCV Valve
PCV Valve
Secondary Air Injection Pump Check Valve
Secondary Air Injection Pump Check Valve
Vacuum Control Valve
Vacuum Control Valve

Shop for Top Selling Genuine Volkswagen Passat EGR Valves

  • We Stock the following top leading brands, including Febi, Standard Ignition, Valeo, Pierburg, Hella
  • Constantly Updated Inventory of Volkswagen Passat Replacement EGR Valve Parts

We also have EGR Valve parts for other Volkswagen models, including Beetle, CC, Cabrio, Corrado, EuroVan, Fox, Golf, Jetta, Passat, Phaeton, R32, Routan, Touareg.


Febi
2014 Volkswagen Passat EGR Valve 4 Cyl 2.0L Febi

P311-1998DDA    43978  New

Qty:
267.34
Febi EGR Valve
Brand: Febi
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
2014 - Volkswagen Passat DIESEL L 4 Cyl 2.0L 120 1968
Febi
2014 Volkswagen Passat EGR Valve 4 Cyl 2.0L Febi

P311-1998DDA    43978  New

Qty:
267.34
Febi EGR Valve
  • 2.0L
Brand: Febi
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
2014 - Volkswagen Passat DIESEL L 4 Cyl 2.0L 120 1968
Standard Ignition
2004 Volkswagen Passat EGR Valve 4 Cyl 2.0L Standard Ignition

P311-0B0E1BA    EGV1072  New

038 131 501 AD , 038 131 501 BH , 038 131 501AD , 038131501AD , 038131501BF , 19239911 , 214-2248 , 4F1958 , 70-6205 , EGR1831 , EGR4408 , V10-63-0004

Qty:
466.07
Standard Ignition EGR Valve
  • Exhaust Gas Recirculation Valve
  • ; Genuine Intermotor Quality
  • Product Attributes:
    • Connector Gender: Female
    • Connector Shape: Oval
    • Digital/Mechanical: Electronic
    • Gaskets Included: No
    • Number of Bolt Holes: 2
    • Terminal Gender: Male
    • Terminal Quantity: 5
    • Terminal Type: Blade
  • Our EGR valves are designed as direct-fit OE replacements. All stainless steel internal components and fully encapsulated copper windings and connections on Our electronic EGR valves ensure precision operation and greater protection against the tough operating environment. Our premium EGR valves are engineered and tested to ensure an extended service life. Our EGR products contain feature rich design and componentry yielding market leadership performance. As a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
2004 - Volkswagen Passat DIESEL L 4 Cyl 2.0L 120 1967
Standard Ignition
1990 Volkswagen Passat EGR Valve Standard Ignition

P311-3DB1389    EGV1074  New

051 131 503 , 051131503 , 4F1741 , 70-6070 , EGR1833 , EGR4216

Qty:
458.83
Standard Ignition EGR Valve
  • Exhaust Gas Recirculation Valve
  • ; Genuine Intermotor Quality
  • Product Attributes:
    • Connector Gender: Female
    • Digital/Mechanical: Mechanical
    • Gaskets Included: No
    • Hose Connector Quantity: 1
    • Number of Bolt Holes: 2
  • Our EGR valves are designed as direct-fit OE replacements. All stainless steel internal components and fully encapsulated copper windings and connections on Our electronic EGR valves ensure precision operation and greater protection against the tough operating environment. Our premium EGR valves are engineered and tested to ensure an extended service life. Our EGR products contain feature rich design and componentry yielding market leadership performance. As a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle
1990 - Volkswagen Passat
Standard Ignition
1994 Volkswagen Passat EGR Valve 4 Cyl 1.9L Standard Ignition

P311-238643A    EGV1076  New

028 131 501E , 028131501E , EGR1835 , V10-63-0040

Qty:
468.07
Standard Ignition EGR Valve
  • Exhaust Gas Recirculation Valve
  • ; Genuine Intermotor Quality
  • Product Attributes:
    • Digital/Mechanical: Mechanical
    • Gaskets Included: No
    • Hose Connector Quantity: 1
    • Number of Bolt Holes: 4
  • Our EGR valves are designed as direct-fit OE replacements. All stainless steel internal components and fully encapsulated copper windings and connections on Our electronic EGR valves ensure precision operation and greater protection against the tough operating environment. Our premium EGR valves are engineered and tested to ensure an extended service life. Our EGR products contain feature rich design and componentry yielding market leadership performance. As a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle Block Engine CID CC
1994 - Volkswagen Passat L 4 Cyl 1.9L 116 1896
Standard Ignition
1994 Volkswagen Passat EGR Valve 6 Cyl 2.8L Standard Ignition

P311-17EC452    EGV1080  New

021 131 503A , 021131503A , 4F1739 , 70-6068 , EGR1839 , EGR4214

Qty:
1,030.37
Standard Ignition EGR Valve
  • Exhaust Gas Recirculation Valve
  • ; Genuine Intermotor Quality
  • Product Attributes:
    • Digital/Mechanical: Mechanical
    • Gaskets Included: No
    • Hose Connector Quantity: 1
    • Number of Bolt Holes: 2
  • Our EGR valves are designed as direct-fit OE replacements. All stainless steel internal components and fully encapsulated copper windings and connections on Our electronic EGR valves ensure precision operation and greater protection against the tough operating environment. Our premium EGR valves are engineered and tested to ensure an extended service life. Our EGR products contain feature rich design and componentry yielding market leadership performance. As a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle Block Engine CID CC
1994 - Volkswagen Passat V 6 Cyl 2.8L - 2771
Standard Ignition
2013 Volkswagen Passat EGR Valve Standard Ignition

P311-24C7042    EGV1247  New

03L 131 501 E , 03L 131 501 G , 03L131501D , 03L131501K , 4F2099 , 70-6383 , EGR2007 , EGR4549

Qty:
301.87
Standard Ignition EGR Valve
  • Exhaust Gas Recirculation Valve
  • ; Genuine Intermotor Quality
  • Product Attributes:
    • Connector Gender: Female
    • Connector Quantity: 1
    • Connector Shape: Oval
    • Digital/Mechanical: Electronic
    • Gaskets Included: Yes
    • Mounting Type: Bolt Mount
    • Number of Bolt Holes: 6
    • O.E.M. Replacement: Yes
    • Terminal Gender: Male
    • Terminal Quantity: 5
    • Terminal Type: Blade
  • Each EGR valve is a direct-fit replacement that replaces OE damaged units to provide precise amount of exhaust gasses back into the inlet air charge and lower the maximum temperature of the burning fuel. Each connector and terminal is constructed with OE quality materials to ensure an exact fit connection, resume peak conductivity to the engine wiring harness, and resulting in a precise engine performance. All stainless steel internal components and fully encapsulated copper windings on our electronic EGR valves ensure precision operation and greater protection against tough operating environment. Precisely machined cut mounting slot matching OE specifications to provide a faster and easier bolt-on installation.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle Fuel Type
2013 - Volkswagen Passat DIESEL
Valeo
2013 Volkswagen Passat EGR Valve 4 Cyl 2.0L Valeo - EGR Valve

P311-421BFB4    700424  New

03L131501D , 03L131501E , 03L131501G , 03L131501K

Qty:
220.52
Valeo EGR Valve
  • EGR Valve for Volkswagen Jetta 2009-2013
  • ; VALEO IS THE OE SUPPLIER FOR THIS VEHICLE
  • EGR Valve Volkswagen
  • EGR Valve
  • Product Attributes:
    • Family: Valeo Oe
  • The EGR Valve is a key component of the exhaust gas recirculation system. It regulates the rate of re-circulated exhaust gas, reducing vehicle emissions. Valeo offers a direct replacement with the same high quality product we supply to major vehicle manufacturer partners worldwide.
Brand: Valeo
Additional Fitment Information:
Vehicle Block Engine CID CC
2013 - Volkswagen Passat L 4 Cyl 2.0L 120 1968
Valeo
2004 Volkswagen Passat EGR Valve 4 Cyl 2.0L Valeo - EGR Valve

P311-4A61DC9    817754  New

038131513S

Qty:
290.14
Valeo EGR Valve
  • EGR Valve for Volkswagen Passat 2004-2005
  • ; VALEO IS THE OE SUPPLIER FOR THIS VEHICLE
  • EGR Valve Volkswagen
  • EGR Valve
  • Product Attributes:
    • Family: Valeo Oe
  • The EGR Valve is a key component of the exhaust gas recirculation system. It regulates the rate of re-circulated exhaust gas, reducing vehicle emissions. Valeo offers a direct replacement with the same high quality product we supply to major vehicle manufacturer partners worldwide.
Brand: Valeo
Additional Fitment Information:
Vehicle Block Engine CID CC
2004 - Volkswagen Passat L 4 Cyl 2.0L 120 1967
Pierburg
1997 Volkswagen Passat EGR Valve 6 Cyl 2.8L Pierburg

P311-0DBA5E8    W0133-1600354  New

Qty:
245.22
Pierburg EGR Valve
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • ; For Air Pump Circuit - Also known as Kombi-Valve or Secondary Air Injection Valve
  • .
Brand: Pierburg
Additional Fitment Information:
Vehicle Block Engine CID CC
1997 - Volkswagen Passat V 6 Cyl 2.8L - 2771
Pierburg
1996 Volkswagen Passat EGR Valve 6 Cyl 2.8L Pierburg

P311-0DBA5E8    W0133-1600354  New

Qty:
245.22
Pierburg EGR Valve
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • ; Chas: 000 001-, For Air Pump Circuit - Also known as Kombi-Valve or Secondary Air Injection Valve
  • .
Brand: Pierburg
Additional Fitment Information:
Vehicle Block Engine CID CC Chassis Range
1996 - Volkswagen Passat V 6 Cyl 2.8L - 2771 000 001 and up
Pierburg
2004 Volkswagen Passat EGR Valve 4 Cyl 2.0L Pierburg

P311-5F46FD7    W0133-1902479  New

Qty:
370.47
Pierburg EGR Valve
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Pierburg
Additional Fitment Information:
Vehicle Block Engine CID CC
2004 - Volkswagen Passat L 4 Cyl 2.0L 120 1967
Pierburg
1999 Volkswagen Passat EGR Valve 6 Cyl 2.8L Pierburg

P311-2B94DB0    W0133-3051766  New

Qty:
125.19
Pierburg EGR Valve
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Pierburg
Additional Fitment Information:
Vehicle Block Engine CID CC
1999 - Volkswagen Passat V 6 Cyl 2.8L - 2771
Pierburg
1999 Volkswagen Passat EGR Valve 6 Cyl 2.8L Pierburg - Kombi-Valve

P311-2B94DB0    W0133-3051766  New

Qty:
125.19
Pierburg EGR Valve
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Kombi-Valve
Brand: Pierburg
Additional Fitment Information:
Vehicle Block Engine CID CC
1999 - Volkswagen Passat V 6 Cyl 2.8L - 2771
Pierburg
2000 Volkswagen Passat EGR Valve Pierburg - Kombi-Valve

P311-2B94DB0    W0133-3051766  New

Qty:
125.19
Pierburg EGR Valve
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • ; Right
  • Kombi-Valve
Brand: Pierburg
Additional Fitment Information:
Vehicle Aspiration
2000 - Volkswagen Passat Naturally Aspirated
Pierburg
2000 Volkswagen Passat EGR Valve Pierburg

P311-2B94DB0    W0133-3051766  New

Qty:
125.19
Pierburg EGR Valve
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • ; Right
Brand: Pierburg
Additional Fitment Information:
Vehicle Aspiration
2000 - Volkswagen Passat Naturally Aspirated
Pierburg
2000 Volkswagen Passat EGR Valve Pierburg

P311-42DD7A7    W0133-2194941  New

Qty:
149.86
Pierburg EGR Valve
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Pierburg
Additional Fitment Information:
Vehicle Engine Designation
2000 - Volkswagen Passat AUG
Valeo
2014 Volkswagen Passat EGR Valve 4 Cyl 2.0L Valeo

P311-1318C4F    W0133-1968077  New

Qty:
282.97
Valeo EGR Valve
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Valeo
Additional Fitment Information:
Vehicle Block Engine CID CC
2014 - Volkswagen Passat L 4 Cyl 2.0L 120 1968
Pierburg
2000 Volkswagen Passat EGR Valve Pierburg

P311-078C10B    W0133-1604146  New

Qty:
178.04
Pierburg EGR Valve
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • ; Also known as Kombi-Valve or Secondary Air Injection Valve
  • .
Brand: Pierburg
Additional Fitment Information:
Vehicle Engine Designation
2000 - Volkswagen Passat ATW
Hella
2005 Volkswagen Passat EGR Valve 4 Cyl 2.0L Hella

P311-1ECE4E4    7.00365.06.0  New

038 131 501 AD , 038 131 501 BF , 038 131 501 BH , 038131501AD , 038131501BF , 038131501BH , 45-8134 , 555048 , 710571D , 88054 , 959139 , EG10260-12B1 , LEV0018 , V10-63-0004 , XEGR28

Qty:
223.75
Hella EGR Valve
  • ; with OE No. 038131501AD
Brand: Hella
Additional Fitment Information:
Vehicle Engine Designation Block Engine CID CC
2005 - Volkswagen Passat BHW L 4 Cyl 2.0L 120 1967

Latest Car Advice

CarJunky AutoAdvice

MOTOR HAS HICKUPS

Showing 3 out of 7 Posts | Show 4 Hidden Posts
Question From lennyd on MOTOR HAS HICKUPS

1986 dodge ramcharger. 318ci. 2 bbl carb. 4x4
motor has hickups once it warms up and reaches 35-40 mph
indications told me it was the EGR valve
when I unbolted it and inspected it I noticed a crack across both holes. after research and waiting 2 days for replacement EGR valve I installed it with the # 9 washer
I need to back up here one time and tell you that there wasn't anyone and still isn't anyone that can tell me the right EGR valve that will fit my truck.there were no OEM #'s on the old EGR valve.
getting back, I took a guess at the #9 washer for it by looking at the old one and kinda matching it.
I took my truck for a test drive after the install and just when I thought it was fixed it started hickuping again.
Questions:
could I not have the right EGR valve and can you help me find the # EGR valve I need
or
do I need to chage the washer untill I get the right # washer in there for my truck....the new EGR valve came with about 10 washers with diff. numbers on them
or Could I fixed the cracked EGR valve and I have a problem somewhere else
Please help

Response From Tom Greenleaf

Just some thoughts on this vintage of Chystler engine: I had a lot of issues with these with sludge not allowing proper exhaust heat thru intake manifold. Not real hard but it was fixed with taking the whole thing out and cleaning it all up. That sludge was a surprise as it was happening to cared for engines?

EGR fix: If the crack is just a crack and not sealing anything right there, there are high temp JB-weld type products that will take full exhaust heat. Good stuff but of course not as strong as uncracked metal,

T

Response From lennyd

i bought a new EGR valve and installed it, but wasn't sure on putting the right number washer in it. i took a ,lets say educated guess going by the size of the old one..could it be the wrong number washer? jb weld is the BOMB...i used it on my boat and it works great.i keep it with me on the boat just in case. it's a miracle worker.
as far as the slug i will wait till i can put the truck down for a day and take your advice.
i was also told i might have blown the diapham in the carb. is that possible? thank you in advance for your knowlege and advice

Response From Tom Greenleaf Top Rated Answer

Diaphragm in carb could be tested with spraying carb cleaner at suspect leak and if idle reacts it probably is leaking there. What diaphragm? Choke pull-offs and a carb kit should still be available for replace these if needed,

T

Response From lennyd

do you think by changing the washer in the EGR valve to a bigger or smaller hole will make the difference here?

Response From Tom Greenleaf

I'm trying to recall this set up and the washer thing with this. The washers must be sized for different applications for this is the best I can guess. The whole EGR concept is the blend in some exhaust gas into the incoming mixture to REDUCE combustion temps which in turn lowers NOx output - this happens at part throttle, or supposed to happen only then and not at idle or wide-open-throttle. Ones that have been plugged or don't operate can make the engine "ping" at part throttle.

The different calibrations would have some impact on operations and alter emissions but probably wouldn't give you the Hick-ups that you have. No harm in trying though. Best to use some of the high temp gasket maker on the gasket there and or some high temp grease so you can re-use the gasket if you are going to test out the different sizes.

These engines were some of the best workhorses ever made and they hung on to that block as long as possible. They (Chrysler) always had some issues with carbs and I think that's where most of your problems are. With those and the gaskets, diaphragms on anything, carb cleaner spray finds the leaks,

T

Response From lennyd

tom, i can't thank you enogh for you knolege. i think your right i should lean more to the carb. will buy the rebuilding kit and try that.i really think i hit the gasket thing right on with the right size washer on the EGR valve. . your right on the workhorse of the 318 ci motor. this truck has some power. i just bought it about 4 weeks ago and the kid wanted $600.00 for it. i got it for $200.00 and haven't even put $100.00 into it. had ninor things wrong to pass inspection. little rust and it hasn't run in over 1 1/2 years. he put a new battery in it and he ran it till i bought it.was a old hunting truck and boy did the inside look like it. all cleaned up now and my wife even likes it. can pull my bass boat now without asking to use someone elses truck.
thanks again.....lenny

egr valve

Showing 4 out of 4 Posts
Question From roblee on egr valve

My '04 Ford F350 was running rough, had a friend hook a computer to it and it diagnosed the egr valve as being bad. I bought an egr valve, but I'm not sure where it is located under the hood and exactly how to remove and replace. HELP!!

Response From way2old

What was the EXACT code number of the code?? If it was a P0401, the valve will not cure it. More than likely it will be the DPFE sensor. Let us know.

Response From roblee

what is that sensor for and where is it located on the truck, also the truck is diesel.

Response From way2old Top Rated Answer

Still need the exact code number so we can research it for you. All I am doing now is guessing. This can get expensive by guessing on parts. Post back the codes and we can help you lots more.

Suzuki Esteem won't start after EGR Valve Replacement

Showing 4 out of 5 Posts | Show 1 Hidden Posts
Question From Guest on Suzuki Esteem won't start after EGR Valve Replacement

I have a 1999 Suzuki Esteem 1.6L 16 valve. 120,000 miles on it. I was getting the EGR Flow engine error code so I took off the EGR valve cleaned it up a bit and that fixed the problem for a couple of weeks. When the light came back on I replaced the EGR valve with a used one. Now the engine won't start at all with the old EGR valve or the new one. It turns over but won't start. If I spray some quick starter in the air intake it will fire and run for a few seconds but then die. I tried blocking the EGR valve altogether but there is no change. Any ideas?

Response From Loren Champlain Sr

An EGR valve won't keep an engine from starting. Granted, it may not run real good, but should run. Doesn't sound like you are getting fuel to the injectors. Look for disconnected or poorly connected connectors. Can't image how you'd blown a fuse or a relay doing the EGR, but worth a check.

Response From Guest Top Rated Answer

Thanks, I don't see any problems with any connectors or hoses - the fuel pump relay does not seem to be the problem. Is there a simple way to tell if the fuel pump is working?

Response From Loren Champlain Sr

Well, the best and safest way would be to connect a fuel pressure guage to the fuel rail. Listen for the fuel pump running when you first turn on the ignition. Being hard of hearing, I'll stick a funnel in the fuel tank opening, hold my ear close, and have someone turn on the key (or have someone with some hearing left to listen). It'll only run for a few seconds, then shut off.

Response From Guest

Update - problem was the fuel pump. I think it will spell the end of the line for this Esteem. Thanks for your help.

electric egr valve

Showing 3 out of 11 Posts | Show 8 Hidden Posts
Question From walshbrk on electric egr valve

pulled the egr valve off of my 4.3 vortec today to clean the carbon out of it when i pulled it off it was milky looking inside i,m guessing this could indicate a blown intake gasket .

Response From Hammer Time Top Rated Answer

Are you losing coolant?

Response From walshbrk

yes it is leaking coolant .

Response From Hammer Time

Leaking? You mean externally? Where?

Response From walshbrk

yes externally runs off the front of engine .

Response From Hammer Time

Fix that problem before you worry about the EGR vale. It may or may not be related.

Response From walshbrk

oh i,m not worried about the egr was thinking since it,s milky looking and i,m leaking coolant it,s the intake gasket .

Response From Hammer Time

If the other leak is caused by the intake gasket, then it's not going to matter so either fix that first or remove the intake gasket and look.

Response From walshbrk

leaking intake gasket was my problem workedon it about 8 hours yesterday ran it through two heat cycles this morning problems solved .

Response From Hammer Time

Glad to hear that.

Response From walshbrk

thanks Hammer .