Shop for Discount Auto Parts, Replacement and Performance Parts and Accessories

1979 Subaru GL Distributor 4 Cyl 1.6L Cardone - Distributor

Part # P311-2A76851 Manu # 31-634 Condition: Remanufactured

Qty:

In Stock & Ready to Ship

Best Price: $181.41

Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Magnetic Coil
- E-Waste: Yes
- Electronic Module Supplied: No
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Block	Engine	CID	CC
1979 - Subaru GL	H	4 Cyl 1.6L	-	1595

1986 Subaru GL Distributor 4 Cyl 1.8L Cardone - Distributor

Part # P311-09BB2CE Manu # 31-853 Condition: Remanufactured

Qty:

In Stock & Ready to Ship

Best Price: $296.77

Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Optical
- E-Waste: Yes
- Electronic Module Supplied: No
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Drive Type	Aspiration	Cylinder Head Type	Fuel Delivery Type	Block	Engine	CID	CC
1986 - Subaru GL	FWD	Naturally Aspirated	SOHC	FI	H	4 Cyl 1.8L	-	1781

1987 Subaru GL Distributor 4 Cyl 1.8L Cardone - Distributor

Part # P311-09BB2CE Manu # 31-853 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 22100AA053

Qty:

In Stock & Ready to Ship

Best Price: $296.77

Before 12/1986 Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Optical
- E-Waste: Yes
- Electronic Module Supplied: No
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Cylinder Head Type	Fuel Delivery Type	Block	Engine	CID	CC
1987 - Subaru GL	SOHC	FI	H	4 Cyl 1.8L	-	1781

1986 Subaru GL Distributor 4 Cyl 1.8L Cardone - Distributor

Part # P311-3A1A92B Manu # 31-855 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 22100AA121

Qty:

In Stock & Ready to Ship

Best Price: $296.64

without California Emissions System Supplied with Module Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Magnetic Coil
- E-Waste: Yes
- Electronic Module Supplied: Yes
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Drive Type	Cylinder Head Type	Fuel Delivery Type	Block	Engine	CID	CC
1986 - Subaru GL	4WD	SOHC	CARB	H	4 Cyl 1.8L	-	1781

1985 Subaru GL Distributor 4 Cyl 1.8L Cardone - Distributor

Part # P311-3A1A92B Manu # 31-855 Condition: Remanufactured

Qty:

In Stock & Ready to Ship

Best Price: $296.64

without California Emissions System From 11/1984 Supplied with Module Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Magnetic Coil
- E-Waste: Yes
- Electronic Module Supplied: Yes
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Drive Type	Cylinder Head Type	Fuel Delivery Type	Block	Engine	CID	CC
1985 - Subaru GL	4WD	SOHC	CARB	H	4 Cyl 1.8L	-	1781

1988 Subaru GL Distributor 4 Cyl 1.8L Cardone - Distributor

Part # P311-2E9423D Manu # 31-854 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 22100AA400 , 22100AA440 , 22100AA450

Qty:

In Stock & Ready to Ship

Core Price: $35.10 Best Price: $296.77

Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Optical
- E-Waste: Yes
- Electronic Module Supplied: No
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Cylinder Head Type	Block	Engine	CID	CC
1988 - Subaru GL	SOHC	H	4 Cyl 1.8L	-	1781

1987 Subaru GL Distributor 4 Cyl 1.8L Cardone - Distributor

Part # P311-2E9423D Manu # 31-854 Condition: Remanufactured

Qty:

In Stock & Ready to Ship

Core Price: $35.10 Best Price: $296.77

From 12/1986 Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Optical
- E-Waste: Yes
- Electronic Module Supplied: No
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Cylinder Head Type	Fuel Delivery Type	Block	Engine	CID	CC
1987 - Subaru GL	SOHC	FI	H	4 Cyl 1.8L	-	1781

1974 Subaru GL Distributor 4 Cyl 1.4L Cardone - Distributor

Part # P311-30474C7 Manu # 31-631 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 1103519 , 1103519D41460 , D41460

Qty:

In Stock & Ready to Ship

Best Price: $169.02

Point Type
Distributor
Product Attributes:
- Coil Wire Included: No
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Points
- E-Waste: Yes
- Electronic Module Supplied: No
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Block	Engine	CID	CC
1974 - Subaru GL	H	4 Cyl 1.4L	83	1361

1985 Subaru GL Distributor 4 Cyl 1.8L Cardone - Distributor

Part # P311-4C6F732 Manu # 31-850 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 22100AA044 , 22100AA082 , 22100AA083 , 22100AA102 , 22100AA111 , 22100AA112 , 22100AA190 , 22100AA192 , 22100AA240 , 22100AA250 , 22100AA310

Qty:

In Stock & Ready to Ship

Core Price: $35.10 Best Price: $296.77

From 11/1984 Module not Supplied Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Magnetic Coil
- E-Waste: Yes
- Electronic Module Supplied: Yes
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Drive Type	Cylinder Head Type	Fuel Delivery Type	Block	Engine	CID	CC
1985 - Subaru GL	FWD	SOHC	CARB	H	4 Cyl 1.8L	-	1781

1986 Subaru GL Distributor 4 Cyl 1.8L Cardone - Distributor

Part # P311-4C6F732 Manu # 31-850 Condition: Remanufactured

Qty:

In Stock & Ready to Ship

Core Price: $35.10 Best Price: $296.77

with California Emissions System Module not Supplied Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Magnetic Coil
- E-Waste: Yes
- Electronic Module Supplied: Yes
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Cylinder Head Type	Fuel Delivery Type	Block	Engine	CID	CC
1986 - Subaru GL	SOHC	CARB	H	4 Cyl 1.8L	-	1781

1985 Subaru GL Distributor 4 Cyl 1.8L Cardone - Distributor

Part # P311-4C6F732 Manu # 31-850 Condition: Remanufactured

Qty:

In Stock & Ready to Ship

Core Price: $35.10 Best Price: $296.77

with California Emissions System From 11/1984 Module not Supplied Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Magnetic Coil
- E-Waste: Yes
- Electronic Module Supplied: Yes
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Drive Type	Cylinder Head Type	Fuel Delivery Type	Block	Engine	CID	CC
1985 - Subaru GL	4WD	OHV	CARB	H	4 Cyl 1.8L	-	1781

1985 Subaru GL Distributor 4 Cyl 1.8L Cardone - Distributor

Part # P311-376F5F3 Manu # 31-812 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 22100AA053 , 22100AA081 , 22100AA082 , 22100AA083 , 22100AA101 , 22100AA102 , 22100AA111 , 22100AA112 , 22100AA120 , 22100AA121 , 22100AA191 , 22100AA192 , 22100AA220 , 22100AA221 , 22100AA240 , 22100AA370 , 22100AA440 , 429878900 , 429879000

Qty:

In Stock & Ready to Ship

Core Price: $20.70 Best Price: $328.00

with Nippon Distributor Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Magnetic Coil
- E-Waste: Yes
- Electronic Module Supplied: Yes
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Cylinder Head Type	Block	Engine	CID	CC
1985 - Subaru GL	OHV	H	4 Cyl 1.8L	-	1781

1982 Subaru GL Distributor 4 Cyl 1.8L Cardone - Distributor

Part # P311-376F5F3 Manu # 31-812 Condition: Remanufactured

Qty:

In Stock & Ready to Ship

Core Price: $20.70 Best Price: $328.00

Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Magnetic Coil
- E-Waste: Yes
- Electronic Module Supplied: Yes
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Drive Type	Block	Engine	CID	CC
1982 - Subaru GL	FWD	H	4 Cyl 1.8L	-	1781

Distributor MSD

Part # P311-3811787 Manu # 85793 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $563.89

Pro-Billet Distributor
Pro-Billet Distributor; For Use w/Ford 289/302 Engines; For Use w/MSD 6/7/8 Series Ignition; Black;
Product Attributes:
- Distributor Type: Hei/breakerless
- Engine Make/Size: Ford Small Block
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Must Be Used w/An MSD Ignition Control
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- CNC machined billet aluminum housing and billet aluminum base
- Easy-to-adjust mechanical advance
- Supplied w/springs and stop bushings (except locked out versions)
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- Advance weight pins are staked and tig welded to the plate
- Nylon pads ensure smooth operation of the advance weights
- Mech. advance assem. can lock out for crank trigger/race app.
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-5148432 Manu # 83603 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $563.89

MSD Distributor
MSD Distributor; Chevy V8 w/Module; Black;
Product Attributes:
- Distributor Type: Ready To Run
- Engine Make/Size: Chevy V8
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Simple and clean three wire installation
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- Does not require an MSD Ignition Control
- CARB E.O. Approved
- Now includes built-in Rev Limiter
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Built-in module produces a 7.5 amp single spark through high rpm
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
This Black Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-49034DF Manu # 85557 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $445.46

Pro-Billet Distributor
Pro-Billet Distributor; For Use w/Chevy V8; Must Be Used w/An MSD Ignition Control; Black;
Product Attributes:
- Distributor Type: Magnetic Pickup
- Engine Make/Size: Chevy V8
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC machined billet aluminum housing
MSDs most popular performance distributor is now available with a black cap that includes 316 Stainless Steel Terminals. The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high rpm stability, a .500 steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSDs adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application. Must be used with an MSD 6, 7 or 8-series ignition.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-45424A6 Manu # 8486 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $519.90

Crank Trigger Distributor
Crank Trigger Distributor; Racing; Low Profile; Super Tall Block; Includes Dupont Rynite Molded Crab Style Distributor Cap/Rotor/Bronze Gear; Fits Chevy V8;
Product Attributes:
- Distributor Gear: Bronze
- Distributor Type: Crank Type W/mech. Tach Drive
- Engine Make/Size:
  - Chevy Big Block (396-454)
  - Chevy Small Block (262-400)
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Designed to fit low in the block to clear firewall/intake combos
- Must Be Used w/An MSD Crank Trigger And MSD Ignition Control
- Supplied w/Small
- Low Crab Style Dist. Cap/Rotor/Bronze Gear
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Oversized Polished Steel Shaft w/QPQ Coating
- Adjustable Slip Collar For Engines w/Modified Deck Heights
- CNC machined billet aluminum housing and Dupont Rynite base
- 0.500 in. Taller For Extra Tall Chevrolet Based Engine Blocks
The super tall crab cap is taller to fit special racing blocks such as the Allen Root or Rocket blocks. The MSD Crab Cap Distributors are built specifically for racing engines with almost no room for a distributor due to tunnel rams or blowers. The distributor is equipped with a special low-profile crab style distributor cap to allow it to fit in extremely tight areas. The housing features two optional O-rings at the bottom that improve oil control by preventing oil pressure loss. Also, a small oil bleed hole located in the base sprays oil on the distributor and camshaft gears to prevent excessive wear. Since this is a racing distributor, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning this distributor is MSDs own Crab Cap! This cap incorporates spark plug style terminals for a better connection and grip to the plug wires.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor Holley

Part # P311-543032D Manu # 565-211 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $562.75

Dual Sync Distributor
Dual Sync Distributor; For Use w/SB Ford w/8.2 in. Deck Hi-Ram Intake Manifold; For Use w/PN[558-493]; Plug And Play w/Holley EFI; 0.500 in. Gear I.D.; Low Profile; Black/Silver;
Product Attributes:
- Distributor Type: Efi Dual Sync
- Engine Make/Size: Ford Small Block
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Plug And Play With Holley EFI
- CNC Machined Billet Aluminum Housing
- Integrated LEDs Allow For Easy Setup
- Comes With Hardened Steel Distributor Gear
Specifically designed for use with the Holley 8.2 in. SBF Hi-Ram intake manifold, this compact unit shares all of the same great features of our other Holley EFI Dual Sync distributors. The design includes dual Hall Effect sensors for the crankshaft and camshaft signals. It can be used as just a crank speed input, as well as providing a cam sync signal for sequential fueling operation. It is also perfect providing the needed crank and cam signals for Coil-On-Plug applications. The precision-machined shutter wheel design ensures accurate timing, even at very high engine speeds. Holley EFI Dual Sync Distributors are compatible with other EFI systems that support Hall Effect crank and cam sensors.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Distributor MSD

Part # P311-05B983A Manu # 85501 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $486.07

Pro-Billet Distributor
Pro-Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/Locked-Out Timing; Chevy V8; Bronze Gear; Red;
Product Attributes:
- Distributor Type: Hei/breakerless
- Engine Make/Size:
  - Chevy Big Block (396-454)
  - Chevy Small Block (262-400)
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Designed Primarily For Race Applications w/No Mech. Advance
- Will not accept a vacuum advance canister
- Must Be Used w/An MSD 6/7/8/10 Series Ignition
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- Supplied w/0.006 in. Oversized Bronze Gear Installed
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Adj. slip collar mounting flange for engines w/modified deck hts.
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- CNC machined billet aluminum housing and billet aluminum base
This strong, billet aluminum distributor is set up for engines that run locked-out timing or an MSD Timing Computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft while an extra long sintered bushing stabilizes the lower portion. Trigger signals are produced via a high-output magnetic pick-up. This pickup is extremely accurate and never requires adjustment. Since this distributor is designed primarily for race engines, an oversized (+.006) bronze gear is installed along with an adjustable slip collar for modified blocks, heads or intake manifolds.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-51E8DBD Manu # 85783 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $645.10

Pro-Billet Distributor
Pro-Billet Distributor; For Use w/Ford 351W Engines; Must Be Used w/MSD 6/7/8 Series Ignition; Black;
Product Attributes:
- Distributor Type: Hei/breakerless
- Engine Make/Size: Ford Small Block
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Must Be Used w/An MSD Ignition Control
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- CNC machined billet aluminum housing and billet aluminum base
- Easy-to-adjust mechanical advance
- Supplied w/springs and stop bushings (except locked out versions)
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- Advance weight pins are staked and tig welded to the plate
- Nylon pads ensure smooth operation of the advance weights
- Mech. advance assem. can lock out for crank trigger/race app.
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Finish Selecting Your Vehicle to Shop For Your Distributor

Shop By Brand

Shop By Related Distributor Parts

Shop for Top Selling Genuine Subaru Gl Distributors

Shop Subaru Gl Distributors

Finish Selecting Your Vehicle to Shop For Your Distributor

Shop By Brand

Shop By Related Distributor Parts

Shop for Top Selling Genuine Subaru Gl Distributors