Shop for Discount Auto Parts, Replacement and Performance Parts and Accessories

1984 Audi 4000 Distributor 4 Cyl 1.8L Cardone - Distributor

Part # P311-0EC4BF5 Manu # 31-938 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 0237020087 , 0237020089 , 0237020105 , 0237020109 , 0237020111 , 0237020146 , 0237020148 , 026905205AH , 026905205B , 026905205L , 026905205S , 026905206B , 027905205F , 027905205Q

Qty:

In Stock & Ready to Ship

Core Price: $35.10 Best Price: $161.51

Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Color: Gray
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Hall Effect
- E-Waste: Yes
- Electronic Module Supplied: No
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Submodel	Block	Engine	CID	CC
1984 - Audi 4000	S	L	4 Cyl 1.8L	-	1781

1988 Audi 80 Distributor 4 Cyl 2.0L Cardone - Distributor

Part # P311-3958639 Manu # 31-292 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 0237520013 , 053905205A

Qty:

In Stock & Ready to Ship

Best Price: $317.40

Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Color: Gray
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Hall Effect
- E-Waste: Yes
- Electronic Module Supplied: No
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Block	Engine	CID	CC
1988 - Audi 80	L	4 Cyl 2.0L	121	1984

1985 Audi 4000 Distributor 4 Cyl 1.8L Cardone - Distributor

Part # P311-11A34FD Manu # 31-298 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 0237520005 , 0237520010 , 0237520026 , 0237520036 , 0237520044 , 026905205S , 037905205 , 037905205AH , 050905237CX

Qty:

In Stock & Ready to Ship

Best Price: $222.71

Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Color: Gray
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Hall Effect
- E-Waste: Yes
- Electronic Module Supplied: No
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Submodel	Block	Engine	CID	CC
1985 - Audi 4000	S	L	4 Cyl 1.8L	-	1781

1990 Audi 100 Distributor 5 Cyl 2.3L Cardone - Distributor

Part # P311-0176077 Manu # 31-291 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 0237522009 , 0237522015 , 034905205H

Qty:

In Stock & Ready to Ship

Core Price: $21.60 Best Price: $272.71

Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Color: Gray
- Cylinders: 5
- Distributor Cap Included: No
- Distributor Type: Hall Effect
- E-Waste: Yes
- Electronic Module Supplied: No
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Block	Engine	CID	CC
1990 - Audi 100	L	5 Cyl 2.3L	-	2309

1985 Audi 5000 Distributor 5 Cyl 2.2L Cardone - Distributor

Part # P311-4058899 Manu # 31-294 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 0237028005 , 0237028007 , 035905206AF

Qty:

In Stock & Ready to Ship

Best Price: $222.71

Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Color: Gray
- Cylinders: 5
- Distributor Cap Included: No
- Distributor Type: Hall Effect
- E-Waste: Yes
- Electronic Module Supplied: No
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Submodel	Aspiration	Block	Engine	CID	CC
1985 - Audi 5000	S Turbo	Turbocharged	L	5 Cyl 2.2L	-	2144

1984 Audi 5000 Distributor 5 Cyl 2.2L Cardone - Distributor

Part # P311-5B0CF23 Manu # 31-295 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 0237030009 , 0237030020 , 0237030021 , 034905205F

Qty:

In Stock & Ready to Ship

Best Price: $264.61

Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Color: Gray
- Cylinders: 5
- Distributor Cap Included: No
- Distributor Type: Hall Effect
- E-Waste: Yes
- Electronic Module Supplied: No
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Submodel	Aspiration	Block	Engine	CID	CC
1984 - Audi 5000	S	Naturally Aspirated	L	5 Cyl 2.2L	-	2144

1987 Audi 5000 Distributor 5 Cyl 2.2L Cardone - Distributor

Part # P311-5531C58 Manu # 31-288 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 0237522011 , 035905206AF

Qty:

In Stock & Ready to Ship

Best Price: $317.40

Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Color: Gray
- Cylinders: 5
- Distributor Cap Included: No
- Distributor Type: Hall Effect
- E-Waste: Yes
- Electronic Module Supplied: No
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Submodel	Block	Engine	CID	CC
1987 - Audi 5000	CS	L	5 Cyl 2.2L	-	2226

1983 Audi 5000 Distributor 5 Cyl 2.2L Cardone - Distributor

Part # P311-5B0CF23 Manu # 31-295 Condition: Remanufactured

Qty:

In Stock & Ready to Ship

Best Price: $264.61

From 03/1983 Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Color: Gray
- Cylinders: 5
- Distributor Cap Included: No
- Distributor Type: Hall Effect
- E-Waste: Yes
- Electronic Module Supplied: No
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Submodel	Aspiration	Block	Engine	CID	CC
1983 - Audi 5000	Base	Naturally Aspirated	L	5 Cyl 2.2L	-	2144

1990 Audi 80 Distributor Cardone

Part # P311-5EF8D3F Manu # W0133-2225473 Condition: Remanufactured

Qty:

In Stock & Ready to Ship

Best Price: $515.49

Remanufactured

Brand: Cardone

Vehicle
1990 - Audi 80

Distributor MSD

Part # P311-05CCF92 Manu # 8485 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $475.98

VW Type 1 Billet Distributor
VW Type 1 Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/o Vacuum Advance; Air Cooled;
Product Attributes:
- Distributor Type: Single Point
- Engine Make/Size: Vw Type 1
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- A performance upgrade designed for VW Type I air cooled engines
- Supplied w/Bolt Down Distributor Cap And Rotor
- Must Be Used w/An MSD Ignition Control
- Advance weight pins are staked and tig welded to the plate
- Nylon pads ensure smooth operation of the advance weights
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- CNC machined billet aluminum housing and Dupont Rynite base
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- Maintenance-free magnetic pickup and precision reluctor
Using technology gained from building distributors for off-road and NASCAR racers, MSD offers this billet distributor for the popular type 1 engine. A maintenance-free magnetic pickup is responsible for triggering the MSD Ignition. This pickup is accurate to within 1? at any RPM so you won't have to worry about points float or burbles at top end speeds. The pickup is triggered by a precision reluctor that is attached to a hardened steel shaft. For increased stability, a sealed ball bearing is used to guide the shaft. Since every engine application is different, the MSD billet distributor features an easy-to-adjust mechanical advance assembly. By simply changing the advance springs and stop bushing you can tune in 24 different advance curves. Note: must be used with an MSD 6 or 7-series ignition. Also, different style spark plug terminals and boots are required or use MSD's custom sets, PN 31939.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-45C1AE6 Manu # 85705 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $762.00

Pro-Billet Distributor
Pro-Billet Distributor; For Use w/Chevy Engine; Must Be Used w/MSD 6/7/8/10 Ignition Box; Supplied w/Bronze Gear;
Product Attributes:
- Distributor Type: Hall-effect Pick Up
- Engine Make/Size:
  - Chevy Big Block (396-502)
  - Chevy Small Block (262-400)
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC Machined Billet Alum. Housing and Billet Alum. Base
- Adj. slip collar mounting flange for engines w/modified deck hts.
- Billet reluctor/magnetic pickup produce accurate trigger signals
- Large diameter Ford style cap prevents spark scatter
- Securely bolts in place
- A Weather tight connector seals and locks the pickup wiring
- Pickup/Reluctor Parylene Coated for Resistance Against Corrosion
MSD is proud to offer a new Pro-Billet Distributor designed to handle the rigors and harsh racing conditions of late model, modified, and off-road racing. The new distributor was designed with input from top racers and engine builders in circle track competition. The new Pro-Billet Distributor has been precision engineered to feature the highest available technical design in its class. Starting at the top of the distributor, a larger diameter distributor cap is securely bolted to the billet aluminum housing. The extra width prevents the chance of spark scatter during high rpm racing. Under the injection molded rotor is a billet steel Reluctor and proven magnetic pickup assembly. The steel Reluctor offers the material and strength required to be modified for advanced cylinder-to-cylinder timing orders. These components are parylene coated to prevent corrosion and the timing is locked-out for a solid signal from idle to redline. Inside the CNC-machined housing, a sealed ball bearing assembly guides a .500" shaft that receives a friction reducing QPQ coating. Mounted to the base of this shaft is an oversized (+.006") bronze distributor gear to ensure the proper mesh with the cam gear.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-092F516 Manu # 8570 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $492.70

Pro-Billet Distributor
Pro-Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/o Vacuum Advance; Red; For Chevy V8;
Product Attributes:
- Distributor Type: Magnetic Pickup
- Engine Make/Size:
  - Chevy Big Block (396-454)
  - Chevy Small Block (262-400)
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC machined billet aluminum housing
- 3/8 in. Smaller/7/8 in. Shorter Than Conv. Chevy V-8 w/Points Cap
- Supplied w/small diameter HEI style distributor cap and rotor
- Will accept PN[8441] Cap-A-Dapt
- Will not accept a vacuum advance canister
- No CARB Exemption Order Number
- O-ring seals can be installed for oil press. control (Mods only)
- Must Be Used w/An MSD 6/7/8/10 Series Ignition
- Special oil tract improves lubrication to the dist./cam gear
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
This distributor was designed for racers and street rodder that have space limitations due to firewall interference, blowers or oversized intake manifolds such as tunnel rams. The distributor is 3/8 In. narrower and almost 1 In. shorter than a standard distributor. Proven performance features include a high output magnetic pick-up and precision machined reluctor for accurate ignition triggering. A fully adjustable mechanical advance allows you to tailor the advance curve to your specific application. Topping it all off is our own small diameter cap. This is molded out of durable Rynite? material and comes with an optional wire retainer.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-54BBB96 Manu # 8563 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $521.00

Pro-Billet Distributor
Pro-Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/o Vacuum Advance; Pontiac V8; Iron Gear;
Product Attributes:
- Distributor Type: Hei/breakerless
- Engine Make/Size: Pontiac V8
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC Machined Billet Alum. Housing and Billet Alum. Base
- No CARB Exemption Order Number
- Will not accept a vacuum advance canister
- Must Be Used w/An MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
The Pro-Billet Y-Block Distributor is built around a CNC-machined billet aluminum housing that is fit with a sealed ball bearing guide for stability and endurance. From timing accuracy, a maintenance-free magnetic pickup reliably triggers the MSD Ignition Control.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-1F42366 Manu # 83613 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $451.09

Pro-Billet Distributor
Pro-Billet Distributor; For Use w/Chevy V8; Must Be Used w/MSD 6/7/8 Series Ignition; Black;
Product Attributes:
- Color: Black
- Distributor Type: Magnetic Pickup
- Engine Make/Size: Chevy Small Block
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC machined billet aluminum housing
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- CNC machined billet aluminum housing and billet aluminum base
- Easy-to-adjust mechanical advance
- Supplied w/springs and stop bushings (except locked out versions)
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- Advance weight pins are staked and tig welded to the plate
- Nylon pads ensure smooth operation of the advance weights
- Mech. advance assem. can lock out for crank trigger/race app.
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001". The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-5802E2C Manu # 83605 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $545.64

Pro-Billet Distributor
Pro-Billet Distributor; Fits Chevy V8 w/Module; Black Cap;
Product Attributes:
- Color: Black
- Distributor Type: Ready To Run
- Engine Make/Size: Chevy V8
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC Machined Billet Alum. Housing and Billet Alum. Base
- Will Not Accept Vacuum Advance Canister
- Must Be Used w/MSD 6/7/8 Series Ignition Control
- Supplied w/HEI Style Black w/316 Stainless Steel Terminals
- O-Ring Seals Can Be Added To Modified Blocks
- Special Oil Tract Improves Lubrication To Dist/Cam Gear
- Nylon Pads Ensure Smooth Operation Of Advance Weights
- Advance Weight Pins Are Staked/Tig Welded To The Plate
- Mech. Advance Assy Can Be Locked Out For Crank Trigger Systems
- Advance Plate/Weights Are Fine Blanked From Chromemoly Steel
- Polished Steel Shaft is QPQ Coated/Guided By Sealed Ball Bearing
- Maintenance-Free Magnetic Pickup/Precision Reluctor
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001". The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-507ECAB Manu # 84893 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $393.62

Crank Trigger Distributor
Crank Trigger Distributor; Includes Dupont Rynite Molded Crab Style Distributor Cap/Rotor/Bronze Gear; Fits Chevy V8; Black;
Product Attributes:
- Distributor Gear: Bronze
- Distributor Type: Crank Type W/mech. Tach Drive
- Engine:
  - Chevy Big Block
  - Chevy Small Block
- Engine Make/Size:
  - Chevy Big Block
  - Chevy Small And Big Block
  - Chevy Small Block
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- 0.500 in. Taller For Extra Tall Chevrolet Based Engine Blocks
- Adj. Slip Collar Mounting Flange For Engines w/Modified Decks
- CNC machined billet aluminum housing and Dupont Rynite base
- Designed to fit low in the block to clear firewall/intake combos
- Must Be Used w/An MSD Crank Trigger And MSD Ignition Control
- O-ring seals can be installed for oil press. control (Mods only)
- Oversized Polished Steel Shaft w/QPQ Coating
- Supplied w/Small
- Low Crab Style Dist. Cap/Rotor/Bronze Gear
The MSD crab cap distributors are built specifically for racing engines with almost no room for a distributor due to tunnel rams or blowers. The distributor is equipped with a special low-profile crab style distributor cap to allow it to fit in extremely tight areas. The housing features two optional O-rings at the bottom that improve oil control by preventing oil pressure loss. Also, a small oil bleed hole located in the base sprays oil on the distributor and camshaft gears to prevent excessive wear. Since this is a racing distributor, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning this distributor is MSD's own crab cap! This cap incorporates spark plug style terminals for a better connection and grip to the plug wires.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-59C1A60 Manu # 8489 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $393.62

Crank Trigger Distributor
Crank Trigger Distributor; Includes Dupont Rynite Molded Crab Style Distributor Cap/Rotor/Bronze Gear; Fits Chevy V8;
Product Attributes:
- Distributor Gear: Bronze
- Distributor Type: Crank Type W/mech. Tach Drive
- Engine:
  - Chevy Big Block
  - Chevy Small Block
- Engine Make/Size:
  - Chevy Big Block
  - Chevy Small And Big Block
  - Chevy Small Block
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Must Be Used w/An MSD Crank Trigger And MSD Ignition Control
- Supplied w/Small
- Low Crab Style Dist. Cap/Rotor/Bronze Gear
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Oversized Polished Steel Shaft w/QPQ Coating
- 0.500 in. Taller For Extra Tall Chevrolet Based Engine Blocks
- Adjustable Slip Collar For Engines w/Modified Deck Heights
- CNC machined billet aluminum housing and Dupont Rynite base
- Designed to fit low in the block to clear firewall/intake combos
The MSD crab cap distributors are built specifically for racing engines with almost no room for a distributor due to tunnel rams or blowers. The distributor is equipped with a special low-profile crab style distributor cap to allow it to fit in extremely tight areas. The housing features two optional O-rings at the bottom that improve oil control by preventing oil pressure loss. Also, a small oil bleed hole located in the base sprays oil on the distributor and camshaft gears to prevent excessive wear. Since this is a racing distributor, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning this distributor is MSD's own crab cap! This cap incorporates spark plug style terminals for a better connection and grip to the plug wires.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-49ACE7D Manu # 83501 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $762.00

Ready-To-Run Distributor
Ready-To-Run Distributor; For Use w/Big Block Ford 351C-460; Comes w/Steel Gear For Use w/Hydraulic Roller Camshaft;
Product Attributes:
- Color: Red
- Distributor Type: Ready To Run
- Engine Make/Size: Ford 351c-400
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Advance weight pins are staked and tig welded to the plate
- Nylon pads ensure smooth operation of the advance weights
- Supplied w/small dia. cap w/HEI style terminals
- race and rotor
- Will accept PN[8441] Cap-A-Dapt
- Does not require an MSD Ignition Control
- CARB E.O. Approved
- Now includes built-in Rev Limiter
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- Equipped w/Steel Gear
- Simple And Clean Installation w/Only Three Wires To Connect
MSD's Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you'll find MSD's accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-3E404CB Manu # 8569 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $448.12

Crank Trigger Distributor
Crank Trigger Distributor; Includes Distributor Cap/Rotor/Bronze Gear; Low Profile; Ford 351C/460 cid;
Product Attributes:
- Distributor Type: Crank Type W/mech. Tach Drive
- Engine Make/Size:
  - Ford 351c
  - Ford 460
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Designed to fit low in the block for racing applications
- For use w/sheet metal intake manifold combinations
- CNC machined billet aluminum housing and Dupont Rynite base
- Polished Steel Shaft w/QPQ Coating For Friction Reduction
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Must Be Used w/An MSD Crank Trigger And MSD Ignition Control
- Supplied w/Large Diameter HEI Style Distributor Cap And Rotor
- Supplied w/Bronze Gear
The MSD low-profile Ford crank trigger distributor is designed specifically for dual CARB sheet metal intakes and must be used with an MSD flying magnet crank trigger system. The low profile distributor uses a large diameter distributor cap which allows it to carry the high voltage outputs of an MSD race ignition. For high-rpm stability, the low profile distributor's housing is CNC machined from a solid billet of 6061-T6 aluminum. Inside this precision housing, a heat-treated 9/16 In. diameter distributor shaft is guided by an upper sealed ball bearing for high RPM endurance and stability.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-56C0971 Manu # 85465 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $510.81

Pro-Billet Distributor
Pro-Billet Distributor; For Use w/Chrysler 426/440; Must Be Used w/An MSD Ignition Control; Black;
Product Attributes:
- Color: Black
- Distributor Type: Race
- Engine Make/Size:
  - Mopar 426
  - Mopar 440
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC machined billet aluminum housing
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001". The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Finish Selecting Your Vehicle to Shop For Your Distributor

Shop By Brand

Best Selling Genuine Audi Distributors

Shop Audi Distributors

Finish Selecting Your Vehicle to Shop For Your Distributor

Shop By Brand

Best Selling Genuine Audi Distributors