Finish Selecting Your Vehicle to Shop For Your Distributor

Choose a Year for your Audi 200 's Distributor

  • 1991
  • 1990
  • 1989

Shop By Brand

The Following brands are available based on your search.

  • Cardone
    Cardone
  • FAST
    FAST
  • Holley
    Holley
  • MSD
    MSD
  • Pertronix
    Pertronix

Shop for Top Selling Genuine Audi 200 Distributors

  • We Stock the following top leading brands, including Cardone, MSD, FAST, Holley
  • Constantly Updated Inventory of Audi 200 Replacement Distributor Parts

We also have Distributor parts for other Audi models, including 80, 100, 100 Quattro, 200, 200 Quattro, 4000, 4000 Quattro, 5000, 5000 Quattro, 80 Quattro, 90, 90 Quattro, Coupe, Quattro.


Cardone
1990 Audi 200 Distributor 5 Cyl 2.2L Cardone - Distributor

P311-4058899    31-294  Remanufactured

0237028005 , 0237028007 , 035905206AF

Qty:
In Stock & Ready to Ship
$224.93
Cardone Distributor
  • Electronic Distributor
  • Distributor
  • Product Attributes:
    • Coil Wire Included: No
    • Cylinders: 5
    • Distributor Cap Included: No
    • Distributor Type: Hall Effect
    • E-Waste: Yes
    • Electronic Module Supplied: No
    • Features and Benefits:
      • 100% New Points And Condensers Installed Where Applicable
      • All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
      • Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
      • Guaranteed Fit And Function
      • Meets Or Exceeds O.e.m. Performance
      • O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
      • Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
      • Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
    • Ignition Rotor Included: No
    • Integrated Ignition Coil: No
    • Product Condition: Remanufactured
  • CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1990 - Audi 200 L 5 Cyl 2.2L - 2226
MSD
Distributor MSD

P311-3811787    85793  New

Qty:
In Stock & Ready to Ship
$484.25
MSD Distributor
  • Pro-Billet Distributor
  • Pro-Billet Distributor; For Use w/Ford 289/302 Engines; For Use w/MSD 6/7/8 Series Ignition; Black;
  • Product Attributes:
    • Distributor Type: Hei/breakerless
    • Engine Make/Size: Ford Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Must Be Used w/An MSD Ignition Control
    • QPQ coated polished steel shaft
    • guided by sealed ball bearings
    • Maintenance-free magnetic pickup and precision reluctor
    • Creates stable trigger signals throughout the rpm range
    • CNC machined billet aluminum housing and billet aluminum base
    • Easy-to-adjust mechanical advance
    • Supplied w/springs and stop bushings (except locked out versions)
    • Advance plate and weights are fine blanked from chrome moly steel
    • QPQ coated for friction reduction
    • Advance weight pins are staked and tig welded to the plate
    • Nylon pads ensure smooth operation of the advance weights
    • Mech. advance assem. can lock out for crank trigger/race app.
  • MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-5148432    83603  New

Qty:
In Stock & Ready to Ship
$538.68
MSD Distributor
  • MSD Distributor
  • MSD Distributor; Chevy V8 w/Module; Black;
  • Product Attributes:
    • Distributor Type: Ready To Run
    • Engine Make/Size: Chevy V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Simple and clean three wire installation
    • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
    • Does not require an MSD Ignition Control
    • CARB E.O. Approved
    • Now includes built-in Rev Limiter
    • O-ring seals can be installed for oil press. control (Mods only)
    • Special oil tract improves lubrication to the dist./cam gear
    • Nylon pads ensure smooth operation of the advance weights
    • Built-in module produces a 7.5 amp single spark through high rpm
    • Easy-to-adjust mech. advance w/supplied springs and stop bushings
    • Vacuum advance canister for improved economy (can be locked out)
    • CNC machined billet aluminum housing and billet aluminum base
  • This Black Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-49034DF    85557  New

Qty:
In Stock & Ready to Ship
$416.77
MSD Distributor
  • Pro-Billet Distributor
  • Pro-Billet Distributor; For Use w/Chevy V8; Must Be Used w/An MSD Ignition Control; Black;
  • Product Attributes:
    • Distributor Type: Magnetic Pickup
    • Engine Make/Size: Chevy V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • CNC machined billet aluminum housing
  • MSDs most popular performance distributor is now available with a black cap that includes 316 Stainless Steel Terminals. The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high rpm stability, a .500 steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSDs adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application. Must be used with an MSD 6, 7 or 8-series ignition.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-45424A6    8486  New

Qty:
In Stock & Ready to Ship
$452.76
MSD Distributor
  • Crank Trigger Distributor
  • Crank Trigger Distributor; Racing; Low Profile; Super Tall Block; Includes Dupont Rynite Molded Crab Style Distributor Cap/Rotor/Bronze Gear; Fits Chevy V8;
  • Product Attributes:
    • Distributor Gear: Bronze
    • Distributor Type: Crank Type W/mech. Tach Drive
    • Engine Make/Size:
      • Chevy Big Block (396-454)
      • Chevy Small Block (262-400)
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Designed to fit low in the block to clear firewall/intake combos
    • Must Be Used w/An MSD Crank Trigger And MSD Ignition Control
    • Supplied w/Small
    • Low Crab Style Dist. Cap/Rotor/Bronze Gear
    • O-ring seals can be installed for oil press. control (Mods only)
    • Special oil tract improves lubrication to the dist./cam gear
    • QPQ coated polished steel shaft
    • guided by sealed ball bearings
    • Oversized Polished Steel Shaft w/QPQ Coating
    • Adjustable Slip Collar For Engines w/Modified Deck Heights
    • CNC machined billet aluminum housing and Dupont Rynite base
    • 0.500 in. Taller For Extra Tall Chevrolet Based Engine Blocks
  • The super tall crab cap is taller to fit special racing blocks such as the Allen Root or Rocket blocks. The MSD Crab Cap Distributors are built specifically for racing engines with almost no room for a distributor due to tunnel rams or blowers. The distributor is equipped with a special low-profile crab style distributor cap to allow it to fit in extremely tight areas. The housing features two optional O-rings at the bottom that improve oil control by preventing oil pressure loss. Also, a small oil bleed hole located in the base sprays oil on the distributor and camshaft gears to prevent excessive wear. Since this is a racing distributor, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning this distributor is MSDs own Crab Cap! This cap incorporates spark plug style terminals for a better connection and grip to the plug wires.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
FAST
Distributor FAST

P311-4586250    306018  New

Qty:
In Stock & Ready to Ship
$370.80
  • XDi EZ-Run Distributor for Oldsmobile
  • Each EZ-Run has a built-in ignition module for simple plug and play installation. Just hook the EZ-Run directly to an external coil, mechanical and/or vacuum advance and drive.
  • Product Attributes:
    • Advance Type: Mechanical And Vacuum
    • C.A.R.B. EO Number: N/a
    • C.A.R.B. Exempt?: No
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Cap Color: Black
    • Cap Diameter: 5
    • Cap Style: Male/hei
    • Computer-Controlled Compatible: No
    • Distributor Gear Rotation: Counterclockwise
    • Distributor Height: 9.125
    • Gear Material: Iron
    • Housing Finish: Polished
    • Housing Material: Billet Aluminum
    • Ignition Box Required: No
    • Mechanical Tach Drive: No
    • Shaft Diameter: 0.500
    • Shaft Material: Billet Steel
    • Slip Collar: No
    • Title: Xdi Ez-run Oldsmobile Distributor
    • Trigger Type: Magnetic
  • Features:
    • Ready to run with no external ignition box needed
    • Adjustable mechanical and vacuum advance for easy setup and use
    • Accurate & dependable electronic module provides maintenance-free operation
    • Ideal for both carburated & EFI conversion engines
    • Available for most domestic V8 applications
  • FAST XDi EZ-Run Distributors come in a convenient package that saves time and space as they do not require an ignition box to fire the coil, while a standard-size cap offers more firewall and manifold clearance than HEI-style distributors. In addition, each billet distributor features mechanical and vacuum advance for easy setup, along with a built-in electronic module that can directly fire an ignition coil, plus provide accurate, dependable and maintenance-free operation. Distributors are available for most domestic V8 applications. XDi EZ-Run distributors are designed to save time, space while also offering accuracy and reliability that is unmatched in its class. A perfect choice for daily drivers, muscle cars and street rods alike, XDi EZ-Run

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle
Holley
Distributor Holley

P311-543032D    565-211  New

Qty:
In Stock & Ready to Ship
$496.59
Holley Distributor
  • Dual Sync Distributor
  • Dual Sync Distributor; For Use w/SB Ford w/8.2 in. Deck Hi-Ram Intake Manifold; For Use w/PN[558-493]; Plug And Play w/Holley EFI; 0.500 in. Gear I.D.; Low Profile; Black/Silver;
  • Product Attributes:
    • Distributor Type: Efi Dual Sync
    • Engine Make/Size: Ford Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Plug And Play With Holley EFI
    • CNC Machined Billet Aluminum Housing
    • Integrated LEDs Allow For Easy Setup
    • Comes With Hardened Steel Distributor Gear
  • Specifically designed for use with the Holley 8.2 in. SBF Hi-Ram intake manifold, this compact unit shares all of the same great features of our other Holley EFI Dual Sync distributors. The design includes dual Hall Effect sensors for the crankshaft and camshaft signals. It can be used as just a crank speed input, as well as providing a cam sync signal for sequential fueling operation. It is also perfect providing the needed crank and cam signals for Coil-On-Plug applications. The precision-machined shutter wheel design ensures accurate timing, even at very high engine speeds. Holley EFI Dual Sync Distributors are compatible with other EFI systems that support Hall Effect crank and cam sensors.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-05B983A    85501  New

Qty:
In Stock & Ready to Ship
$473.58
MSD Distributor
  • Pro-Billet Distributor
  • Pro-Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/Locked-Out Timing; Chevy V8; Bronze Gear; Red;
  • Product Attributes:
    • Distributor Type: Hei/breakerless
    • Engine Make/Size:
      • Chevy Big Block (396-454)
      • Chevy Small Block (262-400)
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Designed Primarily For Race Applications w/No Mech. Advance
    • Will not accept a vacuum advance canister
    • Must Be Used w/An MSD 6/7/8/10 Series Ignition
    • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
    • Supplied w/0.006 in. Oversized Bronze Gear Installed
    • O-ring seals can be installed for oil press. control (Mods only)
    • Special oil tract improves lubrication to the dist./cam gear
    • QPQ coated polished steel shaft
    • guided by sealed ball bearings
    • Adj. slip collar mounting flange for engines w/modified deck hts.
    • Maintenance-free magnetic pickup and precision reluctor
    • Creates stable trigger signals throughout the rpm range
    • CNC machined billet aluminum housing and billet aluminum base
  • This strong, billet aluminum distributor is set up for engines that run locked-out timing or an MSD Timing Computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft while an extra long sintered bushing stabilizes the lower portion. Trigger signals are produced via a high-output magnetic pick-up. This pickup is extremely accurate and never requires adjustment. Since this distributor is designed primarily for race engines, an oversized (+.006) bronze gear is installed along with an adjustable slip collar for modified blocks, heads or intake manifolds.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-2504B1E    85773  New

Qty:
In Stock & Ready to Ship
$538.68
MSD Distributor
  • Pro-Billet Distributor
  • Pro-Billet Distributor; For Use w/Ford 351C-460 Engines; Must Be Used w/MSD 6/7/8 Series Ignition; Black;
  • Product Attributes:
    • Distributor Type: Hei/breakerless
    • Engine Make/Size: Ford Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Must Be Used w/An MSD Ignition Control
    • QPQ coated polished steel shaft
    • guided by sealed ball bearings
    • Maintenance-free magnetic pickup and precision reluctor
    • Creates stable trigger signals throughout the rpm range
    • CNC machined billet aluminum housing and billet aluminum base
    • Easy-to-adjust mechanical advance
    • Supplied w/springs and stop bushings (except locked out versions)
    • Advance plate and weights are fine blanked from chrome moly steel
    • QPQ coated for friction reduction
    • Advance weight pins are staked and tig welded to the plate
    • Nylon pads ensure smooth operation of the advance weights
    • Mech. advance assem. can lock out for crank trigger/race app.
  • MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-5802E2C    83605  New

Qty:
In Stock & Ready to Ship
$522.61
MSD Distributor
  • Pro-Billet Distributor
  • Pro-Billet Distributor; Fits Chevy V8 w/Module; Black Cap;
  • Product Attributes:
    • Distributor Type: Ready To Run
    • Engine Make/Size: Chevy V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • CNC Machined Billet Alum. Housing and Billet Alum. Base
    • Will Not Accept Vacuum Advance Canister
    • Must Be Used w/MSD 6/7/8 Series Ignition Control
    • Supplied w/HEI Style Black w/316 Stainless Steel Terminals
    • O-Ring Seals Can Be Added To Modified Blocks
    • Special Oil Tract Improves Lubrication To Dist/Cam Gear
    • Nylon Pads Ensure Smooth Operation Of Advance Weights
    • Advance Weight Pins Are Staked/Tig Welded To The Plate
    • Mech. Advance Assy Can Be Locked Out For Crank Trigger Systems
    • Advance Plate/Weights Are Fine Blanked From Chromemoly Steel
    • Polished Steel Shaft is QPQ Coated/Guided By Sealed Ball Bearing
    • Maintenance-Free Magnetic Pickup/Precision Reluctor
  • The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance that allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-51E8DBD    85783  New

Qty:
In Stock & Ready to Ship
$529.92
MSD Distributor
  • Pro-Billet Distributor
  • Pro-Billet Distributor; For Use w/Ford 351W Engines; Must Be Used w/MSD 6/7/8 Series Ignition; Black;
  • Product Attributes:
    • Distributor Type: Hei/breakerless
    • Engine Make/Size: Ford Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Must Be Used w/An MSD Ignition Control
    • QPQ coated polished steel shaft
    • guided by sealed ball bearings
    • Maintenance-free magnetic pickup and precision reluctor
    • Creates stable trigger signals throughout the rpm range
    • CNC machined billet aluminum housing and billet aluminum base
    • Easy-to-adjust mechanical advance
    • Supplied w/springs and stop bushings (except locked out versions)
    • Advance plate and weights are fine blanked from chrome moly steel
    • QPQ coated for friction reduction
    • Advance weight pins are staked and tig welded to the plate
    • Nylon pads ensure smooth operation of the advance weights
    • Mech. advance assem. can lock out for crank trigger/race app.
  • MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-05CCF92    8485  New

Qty:
In Stock & Ready to Ship
$488.75
MSD Distributor
  • VW Type 1 Billet Distributor
  • VW Type 1 Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/o Vacuum Advance; Air Cooled;
  • Product Attributes:
    • Distributor Type: Single Point
    • Engine Make/Size: Vw Type 1
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • A performance upgrade designed for VW Type I air cooled engines
    • Supplied w/Bolt Down Distributor Cap And Rotor
    • Must Be Used w/An MSD Ignition Control
    • Advance weight pins are staked and tig welded to the plate
    • Nylon pads ensure smooth operation of the advance weights
    • Mech. advance assem. can be locked out for crank trigger systems
    • Advance plate and weights are fine blanked from chrome moly steel
    • QPQ coated for friction reduction
    • QPQ coated polished steel shaft
    • guided by sealed ball bearings
    • CNC machined billet aluminum housing and Dupont Rynite base
    • Easy-to-adjust mech. advance w/supplied springs and stop bushings
    • Maintenance-free magnetic pickup and precision reluctor
  • Using technology gained from building distributors for off-road and NASCAR racers, MSD offers this Billet Distributor for the popular Type 1 engine. A maintenance-free magnetic pickup is responsible for triggering the MSD Ignition. This pickup is accurate to within 1anddeg; at any rpm so you wont have to worry about points float or burbles at top end speeds. The pickup is triggered by a precision reluctor that is attached to a hardened steel shaft. For increased stability, a sealed ball bearing is used to guide the shaft. Since every engine application is different, the MSD Billet distributor features an easy-to-adjust mechanical advance assembly. By simply changing the advance springs and stop bushing you can tune in 24 different advance curves.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-23C8B99    85505  New

Qty:
In Stock & Ready to Ship
$494.88
MSD Distributor
  • Pro-Billet Distributor
  • Pro-Billet Distributor; w/Locked Out Timing And Bronze Gear; For Use w/Chevy V8; Must Be Used w/MSD 6/7/8 Series Ignition; Black;
  • Product Attributes:
    • Distributor Type: Hei/breakerless
    • Engine Make/Size: Chevy Small And Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Must Be Used w/An MSD Ignition Control
    • QPQ coated polished steel shaft
    • guided by sealed ball bearings
    • Maintenance-free magnetic pickup and precision reluctor
    • Creates stable trigger signals throughout the rpm range
    • CNC machined billet aluminum housing and billet aluminum base
    • Easy-to-adjust mechanical advance
    • Supplied w/springs and stop bushings (except locked out versions)
    • Advance plate and weights are fine blanked from chrome moly steel
    • QPQ coated for friction reduction
    • Advance weight pins are staked and tig welded to the plate
    • Nylon pads ensure smooth operation of the advance weights
    • Mech. advance assem. can lock out for crank trigger/race app.
  • MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-59C1A60    8489  New

Qty:
In Stock & Ready to Ship
$393.62
MSD Distributor
  • Crank Trigger Distributor
  • Crank Trigger Distributor; Includes Dupont Rynite Molded Crab Style Distributor Cap/Rotor/Bronze Gear; Fits Chevy V8;
  • Product Attributes:
    • Distributor Gear: Bronze
    • Distributor Type: Crank Type W/mech. Tach Drive
    • Engine:
      • Chevy Big Block
      • Chevy Small Block
    • Engine Make/Size:
      • Chevy Big Block
      • Chevy Small And Big Block
      • Chevy Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Must Be Used w/An MSD Crank Trigger And MSD Ignition Control
    • Supplied w/Small
    • Low Crab Style Dist. Cap/Rotor/Bronze Gear
    • O-ring seals can be installed for oil press. control (Mods only)
    • Special oil tract improves lubrication to the dist./cam gear
    • QPQ coated polished steel shaft
    • guided by sealed ball bearings
    • Oversized Polished Steel Shaft w/QPQ Coating
    • 0.500 in. Taller For Extra Tall Chevrolet Based Engine Blocks
    • Adjustable Slip Collar For Engines w/Modified Deck Heights
    • CNC machined billet aluminum housing and Dupont Rynite base
    • Designed to fit low in the block to clear firewall/intake combos
  • The MSD Crab Cap Distributors are built specifically for racing engines with almost no room for a distributor due to tunnel rams or blowers. The distributor is equipped with a special low-profile crab style distributor cap to allow it to fit in extremely tight areas. The housing features two optional O-rings at the bottom that improve oil control by preventing oil pressure loss. Also, a small oil bleed hole located in the base sprays oil on the distributor and camshaft gears to prevent excessive wear. Since this is a racing distributor, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning this distributor is MSDs own Crab Cap! This cap incorporates spark plug style terminals for a better connection and grip to the plug wires.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-1F4E984    85555  New

Qty:
In Stock & Ready to Ship
$429.21
MSD Distributor
  • Pro-Billet Distributor
  • Pro-Billet Distributor; Fits Chevy V8 Engines; Must Be Used w/MSD 6/7/8 Series Ignitions; Black;
  • Product Attributes:
    • Distributor Type: Magnetic Pickup
    • Engine Make/Size: Chevy V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • CNC machined billet aluminum housing and billet aluminum base
    • Will Not Accept Vacuum Advance Canister
    • Must Be Used w/An MSD Ignition Control
    • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
    • O-ring seals can be installed for oil press. control (Mods only)
    • Special oil tract improves lubrication to the dist./cam gear
    • Nylon pads ensure smooth operation of the advance weights
    • Advance weight pins are staked and tig welded to the plate
    • Mech. advance assem. can be locked out for crank trigger systems
    • Advance plate and weights are fine blanked from chrome moly steel
    • QPQ coated for friction reduction
    • QPQ coated polished steel shaft
    • guided by sealed ball bearings
  • The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high rpm stability, a .500 steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSDs adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application. Must be used with an MSD 6, 7 or 8-series ignition.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-1C07B3C    83607  New

Qty:
In Stock & Ready to Ship
$747.64
MSD Distributor
  • Marine Distributor
  • Marine Distributor; Ready-To-Run; Chevy V8; No Ignition Box Needed; Maintenance-Free Magnetic Pick-Up; Easy Adjust Mechanical Advance; Aluminum Housing; Anodized Black Finish;
  • Product Attributes:
    • Distributor Type: Ready To Run
    • Engine Make/Size: Chevy V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Black Anodized For Great Looks And Corrosion Resistance
    • Accurate/maintenance-free magnetic pick-up never needs adjustment
    • Easy-to-adjust mech. advance w/supplied springs and stop bushings
    • High output module produces quick starts/smooth idle/performance
    • Now includes built-in Rev Limiter
    • Only three wires to connect for a simple installation
  • MSDs Ready-to-Run Marine Distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. Built off our tried and true billet marine distributors, the 6061-T6 aluminum housing is now hard anodized with a sleek black finish for great looks. This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down, injection-molded cap, a maintenance-free magnetic pickup produces accurate trigger signals while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom tailor a timing curve to match your application. The Ready-to-Run distributors are a breeze to install. Simply drop it into the engine and contect three wires and youre ready-to-run across the lake! Supplied with a cap, rotor, gear and weathertight wiring harness.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
Holley
Distributor Holley

P311-50AE789    565-342  New

Qty:
In Stock & Ready to Ship
$494.52
Holley Distributor
  • Sniper EFI Hyperspark Distributor
  • Sniper EFI Hyperspark Distributor; Fits w/SBF 351W; For Use w/Ignition Coil PN[556-152]; Small Cap;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Easiest Plug-And-play Way To Add Timing Control To Any Sniper EFI Installation
    • Built-in Ignition Coil Driver
    • Safely Provides Enough Spark Energy For Applications Up To 450 HP
    • Patented Clear Installation Cap Eliminates Any Confusion While Installing The Distributor
    • Cast Aluminum Distributor Housing Looks Right At Home In Nearly Every Engine Bay
    • Comes With Cast Gear Installed
    • Precision Shutter Wheel Provides The ECU A Clean RPM Signal Via A Single Hall Effect Sensor
    • Includes Wire Retainer For A Clean Installation
  • HyperSpark Ready to Run adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Distributor Holley

P311-549624F    565-341S  New

Qty:
In Stock & Ready to Ship
$494.52
Holley Distributor
  • Sniper EFI Hyperspark Distributor
  • Sniper EFI Hyperspark Distributor; Fits w/SBF 260/289/302; For Use w/Ignition Coil PN[556-152]; Small Cap; w/Steel Gear;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Easiest Plug-And-play Way To Add Timing Control To Any Sniper EFI Installation
    • Built-in Ignition Coil Driver
    • Safely Provides Enough Spark Energy For Applications Up To 450 HP
    • Patented Clear Installation Cap Eliminates Any Confusion While Installing The Distributor
    • Cast Aluminum Distributor Housing Looks Right At Home In Nearly Every Engine Bay
    • Comes With Cast Gear Installed
    • Precision Shutter Wheel Provides The ECU A Clean RPM Signal Via A Single Hall Effect Sensor
    • Includes Wire Retainer For A Clean Installation
  • HyperSpark Ready to Run adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Distributor Holley

P311-2B60374    565-341  New

Qty:
In Stock & Ready to Ship
$494.52
Holley Distributor
  • Sniper EFI Hyperspark Distributor
  • Sniper EFI Hyperspark Distributor; Fits w/SBF 260/289/302; For Use w/Ignition Coil PN[556-152]; Small Cap;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Easiest Plug-And-play Way To Add Timing Control To Any Sniper EFI Installation
    • Built-in Ignition Coil Driver
    • Safely Provides Enough Spark Energy For Applications Up To 450 HP
    • Patented Clear Installation Cap Eliminates Any Confusion While Installing The Distributor
    • Cast Aluminum Distributor Housing Looks Right At Home In Nearly Every Engine Bay
    • Comes With Cast Gear Installed
    • Precision Shutter Wheel Provides The ECU A Clean RPM Signal Via A Single Hall Effect Sensor
    • Includes Wire Retainer For A Clean Installation
  • HyperSpark Ready to Run adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Distributor Holley

P311-4FFAA35    565-345  New

Qty:
In Stock & Ready to Ship
$494.52
Holley Distributor
  • Sniper EFI Hyperspark Distributor
  • Sniper EFI Hyperspark Distributor; Fits w/Chrysler 383/400; For Use w/Ignition Coil PN[556-152]; Small Cap;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Easiest Plug-And-play Way To Add Timing Control To Any Sniper EFI Installation
    • Built-in Ignition Coil Driver
    • Safely Provides Enough Spark Energy For Applications Up To 450 HP
    • Patented Clear Installation Cap Eliminates Any Confusion While Installing The Distributor
    • Cast Aluminum Distributor Housing Looks Right At Home In Nearly Every Engine Bay
    • Comes With Cast Gear Installed
    • Precision Shutter Wheel Provides The ECU A Clean RPM Signal Via A Single Hall Effect Sensor
    • Includes Wire Retainer For A Clean Installation
  • HyperSpark Ready to Run adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle