Finish Selecting Your Vehicle to Shop For Your Differential Ring and Pinion

Choose a Year for your Plymouth 's Differential Ring and Pinion

  • 1989
  • 1988
  • 1987
  • 1986
  • 1985
  • 1984
  • 1983
  • 1982
  • 1981
  • 1980
  • 1979
  • 1978
  • 1977
  • 1976
  • 1975
  • 1974
  • 1973
  • 1972
  • 1971
  • 1970
  • 1969
  • 1968
  • 1967
  • 1966
  • 1965
  • 1964
  • 1963
  • 1962
  • 1961
Show More Years

Shop By Brand

The Following brands are available based on your search.

  • Dana Spicer Chassis
    Dana Spicer Chassis
  • Dorman
    Dorman
  • Eaton
    Eaton
  • Motive Gear
    Motive Gear
  • Richmond
    Richmond
  • Yukon Gear
    Yukon Gear

Best Selling Genuine Plymouth Differential Ring and Pinions

  • We Stock the following top leading brands, including Richmond, Motive Gear
  • Constantly Updated Inventory of Plymouth Replacement Differential Ring and Pinion Parts

We stock Differential Ring and Pinion parts for most Plymouth models, including Barracuda, Belvedere, Belvedere II, Cuda, Duster, Fury, Fury I, Fury II, Fury III, GTX, Gran Fury, PB100, PB100 Van, PB150, PB200, PB200 Van, PB250, PB300, PB300 Van, PB350, Satellite, Superbird, Trailduster, VIP, Valiant, Volare.


Richmond
1971 Plymouth Fury Differential Ring and Pinion - Rear Richmond - Differential Ring and Pinion

P311-52C18D5    79-0041-1  New

82-6329-1 , 82-9329-1

Qty:
In Stock & Ready to Ship
$631.43
Richmond Differential Ring and Pinion  Rear
  • PRO Gear Differential Ring and Pinion
  • For Dana 60; 6.17 Ratio; Pro Gear; Requires a 4.56 and Numerically Higher Ratio Carrier
  • Richmond - PRO Gear Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: 10
    • Differential Carrier Break: 4.56 Ratio And Higher
    • Differential Case Design Type: Dana 60 Standard
    • Gear Ratio: 6.17
    • Pinion Gear Tooth Quantity: 6
    • Pinion Shaft Diameter: 1.626
    • Pinion Spline Count: 29
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Material: 9310 Steel
    • Ring Gear Outside Diameter: 9.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 37
  • Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Brand: Richmond
Position: Rear
Additional Fitment Information:
Vehicle Position
1971 - Plymouth Fury Rear
Richmond
1967 Plymouth Belvedere II Differential Ring and Pinion - Rear Richmond - Differential Ring and Pinion

P311-518F11C    79-0068-1  New

82-0410-1 , D997488

Qty:
In Stock & Ready to Ship
$631.43
Richmond Differential Ring and Pinion  Rear
  • PRO Gear Differential Ring and Pinion
  • For Dana 60; 4.88 Ratio; Pro Gear; Requires a 4.56 and Numerically Higher Ratio Carrier
  • Richmond - PRO Gear Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: 10
    • Differential Carrier Break: 4.56 Ratio And Higher
    • Differential Case Design Type: Dana 60 Standard
    • Gear Ratio: 4.88
    • Pinion Gear Tooth Quantity: 8
    • Pinion Shaft Diameter: 1.626
    • Pinion Spline Count: 29
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Material: 9310 Steel
    • Ring Gear Outside Diameter: 9.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 39
  • Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Brand: Richmond
Position: Rear
Additional Fitment Information:
Vehicle Position
1967 - Plymouth Belvedere II Rear
Richmond
1970 Plymouth GTX Differential Ring and Pinion - Rear Richmond - Differential Ring and Pinion

P311-2FF090F    79-0077-1  New

D997456

Qty:
In Stock & Ready to Ship
$631.43
Richmond Differential Ring and Pinion  Rear
  • PRO Gear Differential Ring and Pinion
  • For Dana 60; 4.56 Ratio; Pro Gear; Requires a 4.56 and Numerically Higher Ratio Carrier
  • Richmond - PRO Gear Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: 10
    • Differential Carrier Break: 4.56 Ratio And Higher
    • Differential Case Design Type: Dana 60 Standard
    • Gear Ratio: 4.56
    • Pinion Gear Tooth Quantity: 9
    • Pinion Shaft Diameter: 1.626
    • Pinion Spline Count: 29
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Material: 9310 Steel
    • Ring Gear Outside Diameter: 9.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 41
  • Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Brand: Richmond
Position: Rear
Additional Fitment Information:
Vehicle Position
1970 - Plymouth GTX Rear
Richmond
1969 Plymouth Road Runner Differential Ring and Pinion - Rear Richmond - Differential Ring and Pinion

P311-368F26D    79-0013-1  New

82-6324-1 , 997538 , D997538

Qty:
In Stock & Ready to Ship
$613.17
Richmond Differential Ring and Pinion  Rear
  • PRO Gear Differential Ring and Pinion
  • For Dana 60; 5.38 Ratio; Pro Gear; Requires a 4.56 and Numerically Higher Ratio Carrier
  • Richmond - PRO Gear Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: 10
    • Differential Carrier Break: 4.56 Ratio And Higher
    • Differential Case Design Type: Dana 60 Standard
    • Gear Ratio: 5.38
    • Pinion Gear Tooth Quantity: 8
    • Pinion Shaft Diameter: 1.626
    • Pinion Spline Count: 29
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Material: 9310 Steel
    • Ring Gear Outside Diameter: 9.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 43
  • Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Brand: Richmond
Position: Rear
Additional Fitment Information:
Vehicle Position
1969 - Plymouth Road Runner Rear
Richmond
1968 Plymouth Fury Differential Ring and Pinion - Rear Richmond - Differential Ring and Pinion

P311-1960E95    49-0129-1  New

24813-5X , 706033-1X , 82-0800-1 , 82-0801-1 , D60-354 , D60354

Qty:
In Stock & Ready to Ship
$580.99
Richmond Differential Ring and Pinion  Rear
  • For Dana 60; 3.54 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier
  • Richmond - Street Gear Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: 10
    • Differential Carrier Break: 3.07 To 4.10 Ratio
    • Differential Case Design Type: Dana 60 Standard
    • Gear Ratio: 3.54
    • Pinion Gear Tooth Quantity: 11
    • Pinion Shaft Diameter: 1.626
    • Pinion Spline Count: 29
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 9.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 39
  • Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Brand: Richmond
Position: Rear
Additional Fitment Information:
Vehicle Position
1968 - Plymouth Fury Rear
Richmond
1962 Plymouth Fury Differential Ring and Pinion - Rear Richmond - Differential Ring and Pinion

P311-3118F0D    69-0045-1  New

24229 , 82-7301-1 , 82-8301-1 , C8.42-410-NG , C887410E

Qty:
In Stock & Ready to Ship
$333.12
Richmond Differential Ring and Pinion  Rear
  • For Chrysler 8.75" (742 Housing); 4.10 Ratio; 10 Spline Pinion, Verify Spline Count For Fitment
  • Richmond - Street Gear Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: Dropout
    • Differential Case Design Type: Chrysler 8.75 (742)
    • Gear Ratio: 4.10
    • Pinion Gear Tooth Quantity: 10
    • Pinion Shaft Diameter: 1.75
    • Pinion Spline Count: 10
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 8.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 41
  • Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Brand: Richmond
Position: Rear
Additional Fitment Information:
Vehicle Position
1962 - Plymouth Fury Rear
Richmond
1969 Plymouth Fury Differential Ring and Pinion - Rear Richmond - Differential Ring and Pinion

P311-4299D65    69-0047-1  New

24231 , C8.42-457-NG , C887456E

Qty:
In Stock & Ready to Ship
$331.72
Richmond Differential Ring and Pinion  Rear
  • For Chrysler 8.75" (742 Housing); 4.56 Ratio; 10 Spline Pinion, Verify Spline Count For Fitment
  • Richmond - Street Gear Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: Dropout
    • Differential Case Design Type: Chrysler 8.75 (742)
    • Gear Ratio: 4.56
    • Pinion Gear Tooth Quantity: 9
    • Pinion Shaft Diameter: 1.75
    • Pinion Spline Count: 10
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 8.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 41
  • Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Brand: Richmond
Position: Rear
Additional Fitment Information:
Vehicle Position
1969 - Plymouth Fury Rear
Richmond
1969 Plymouth Fury Differential Ring and Pinion - Rear Richmond - Differential Ring and Pinion

P311-074221D    69-0052-1  New

82-7325-1 , 82-8325-1

Qty:
In Stock & Ready to Ship
$419.99
Richmond Differential Ring and Pinion  Rear
  • For Dana 60; 4.10 Ratio; Thin Gear; Requires a 4.56 and Numerically Higher Ratio Carrier
  • Richmond - Street Gear Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: 10
    • Differential Carrier Break: 4.56 Ratio And Higher
    • Differential Case Design Type: Dana 60 Standard
    • Gear Ratio: 4.10
    • Pinion Gear Tooth Quantity: 10
    • Pinion Shaft Diameter: 1.626
    • Pinion Spline Count: 29
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 9.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 41
  • Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Brand: Richmond
Position: Rear
Additional Fitment Information:
Vehicle Position
1969 - Plymouth Fury Rear
Richmond
1967 Plymouth Belvedere II Differential Ring and Pinion - Rear Richmond - Differential Ring and Pinion

P311-2E4F66B    69-0053-1  New

706033-4X , D60-456 , D60456 , D897456

Qty:
In Stock & Ready to Ship
$419.99
Richmond Differential Ring and Pinion  Rear
  • For Dana 60; 4.56 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier
  • Richmond - Street Gear Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: 10
    • Differential Carrier Break: 4.56 Ratio And Higher
    • Differential Case Design Type: Dana 60 Standard
    • Gear Ratio: 4.56
    • Pinion Gear Tooth Quantity: 9
    • Pinion Shaft Diameter: 1.626
    • Pinion Spline Count: 29
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 9.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 41
  • Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Brand: Richmond
Position: Rear
Additional Fitment Information:
Vehicle Position
1967 - Plymouth Belvedere II Rear
Richmond
1971 Plymouth Fury Differential Ring and Pinion - Rear Richmond - Differential Ring and Pinion

P311-58DEB9D    69-0057-1  New

82-7330-1 , D60-513 , D60513

Qty:
In Stock & Ready to Ship
$419.99
Richmond Differential Ring and Pinion  Rear
  • For Dana 60; 5.13 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier
  • Richmond - Street Gear Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: 10
    • Differential Carrier Break: 4.56 Ratio And Higher
    • Differential Case Design Type: Dana 60 Standard
    • Gear Ratio: 5.13
    • Pinion Gear Tooth Quantity: 8
    • Pinion Shaft Diameter: 1.626
    • Pinion Spline Count: 29
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 9.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 41
  • Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Brand: Richmond
Position: Rear
Additional Fitment Information:
Vehicle Position
1971 - Plymouth Fury Rear
Richmond
1970 Plymouth Fury II Differential Ring and Pinion - Rear Richmond - Differential Ring and Pinion

P311-49A37BC    69-0058-1  New

82-7311-1 , C887391L-10

Qty:
In Stock & Ready to Ship
$344.97
Richmond Differential Ring and Pinion  Rear
  • For Chrysler 8.75" (489 Housing); 3.91 Ratio; 10 Spline Pinion, Verify Spline Count For Fitment
  • Richmond - Street Gear Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: Dropout
    • Differential Case Design Type: Chrysler 8.75 (489)
    • Gear Ratio: 3.91
    • Pinion Gear Tooth Quantity: 11
    • Pinion Shaft Diameter: 1.875
    • Pinion Spline Count: 10
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 8.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 43
  • Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Brand: Richmond
Position: Rear
Additional Fitment Information:
Vehicle Position
1970 - Plymouth Fury II Rear
Richmond
1970 Plymouth GTX Differential Ring and Pinion - Rear Richmond - Differential Ring and Pinion

P311-2242BC1    69-0062-1  New

82-7315-1 , 82-8315-1 , C8.89-486-RG , C887486L-10

Qty:
In Stock & Ready to Ship
$369.63
Richmond Differential Ring and Pinion  Rear
  • For Chrysler 8.75" (489 Housing); 4.86 Ratio; 10 Spline Pinion, Verify Spline Count For Fitment
  • Richmond - Street Gear Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: Dropout
    • Differential Case Design Type: Chrysler 8.75 (489)
    • Gear Ratio: 4.86
    • Pinion Gear Tooth Quantity: 7
    • Pinion Shaft Diameter: 1.875
    • Pinion Spline Count: 10
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 8.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 34
  • Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Brand: Richmond
Position: Rear
Additional Fitment Information:
Vehicle Position
1970 - Plymouth GTX Rear
Richmond
1964 Plymouth Fury Differential Ring and Pinion - Rear Richmond - Differential Ring and Pinion

P311-564009B    69-0145-1  New

24234 , 690145-1 , 82-7308-1 , 82-8308-1 , C8.42-513-NG , C887513E , YG C8.42-513

Qty:
In Stock & Ready to Ship
$340.53
Richmond Differential Ring and Pinion  Rear
  • For Chrysler 8.75" (742 Housing); 5.13 Ratio; 10 Spline Pinion, Verify Spline Count For Fitment
  • Richmond - Street Gear Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: Dropout
    • Differential Case Design Type: Chrysler 8.75 (742)
    • Gear Ratio: 5.13
    • Pinion Gear Tooth Quantity: 8
    • Pinion Shaft Diameter: 1.75
    • Pinion Spline Count: 10
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 8.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 41
  • Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Brand: Richmond
Position: Rear
Additional Fitment Information:
Vehicle Position
1964 - Plymouth Fury Rear
Richmond
1969 Plymouth Fury Differential Ring and Pinion - Rear Richmond - Differential Ring and Pinion

P311-14E4561    69-0371-1  New

82-0685-1 , C887355L , C887355L-10

Qty:
In Stock & Ready to Ship
$417.99
Richmond Differential Ring and Pinion  Rear
  • For Chrysler 8.75" (489 Housing); 3.55 Ratio; 10 Spline Pinion, Verify Spline Count For Fitment
  • Richmond - Street Gear Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: Dropout
    • Differential Case Design Type: Chrysler 8.75 (489)
    • Gear Ratio: 3.55
    • Pinion Gear Tooth Quantity: 11
    • Pinion Shaft Diameter: 1.875
    • Pinion Spline Count: 10
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 8.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 39
  • Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Brand: Richmond
Position: Rear
Additional Fitment Information:
Vehicle Position
1969 - Plymouth Fury Rear
Richmond
1970 Plymouth Fury I Differential Ring and Pinion - Rear Richmond - Differential Ring and Pinion

P311-4169D19    69-0375-1  New

C887391E

Qty:
In Stock & Ready to Ship
$555.99
Richmond Differential Ring and Pinion  Rear
  • For Chrysler 8.75" (742 Housing); 3.91 Ratio; 10 Spline Pinion, Verify Spline Count For Fitment
  • Richmond - Street Gear Differential Ring and Pinion
  • Differential Ring and Pinion
  • Product Attributes:
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: Dropout
    • Differential Case Design Type: Chrysler 8.75 (742)
    • Gear Ratio: 3.91
    • Pinion Gear Tooth Quantity: 11
    • Pinion Shaft Diameter: 1.75
    • Pinion Spline Count: 10
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 8.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 43
  • Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Brand: Richmond
Position: Rear
Additional Fitment Information:
Vehicle Position
1970 - Plymouth Fury I Rear
Motive Gear
1972 Plymouth Fury Differential Ring and Pinion - Rear Motive Gear - Performance Differential Ring and Pinion

P311-1907EDC    C887355L  New

24010 , 36014 , 69-0371-1 , 722C730 , C8.89-355-NG , YG C8.89-355 , ZG C8.89-355

Qty:
In Stock & Ready to Ship
$379.99
Motive Gear Differential Ring and Pinion  Rear
  • For Chrysler 8.75" (489 Housing); Performance Ring and Pinion; 3.55 Ratio; 29 Spline Pinion, Verify Spline Count For Fitment
  • Motive Gear Performance - Performance Differential Ring and Pinion
  • Performance Differential Ring and Pinion
  • Product Attributes:
    • App/Model: Chrysler 8.75 (489)
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: Dropout
    • Differential Case Design Type: Chrysler 8.75 (489)
    • Gear Ratio: 3.55
    • Pinion Gear Tooth Quantity: 11
    • Pinion Shaft Diameter: 1.875
    • Pinion Spline Count: 29
    • Ring & Pinion Gear Ratio: 3.55
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Diameter: 8.75
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 8.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 39
    • Taxonomy A: Ld Differential
    • Taxonomy B: Ring And Pinion
    • Taxonomy C: Rear
    • Taxonomy D: 3.55
  • Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
Brand: Motive Gear
Position: Rear
Additional Fitment Information:
Vehicle Position
1972 - Plymouth Fury Rear
Motive Gear
1970 Plymouth GTX Differential Ring and Pinion - Rear Motive Gear - Performance Differential Ring and Pinion

P311-0CFBF6B    C887355M  New

24006 , 722D730 , C8.41-355-NG , YG C8.41-355

Qty:
In Stock & Ready to Ship
$417.99
Motive Gear Differential Ring and Pinion  Rear
  • For Chrysler 8.75" (741 Housing); Performance Ring and Pinion; 3.55 Ratio; 29 Spline Pinion, Verify Spline Count For Fitment
  • Motive Gear Performance - Performance Differential Ring and Pinion
  • Performance Differential Ring and Pinion
  • Product Attributes:
    • App/Model: Chrysler 8.75 (741)
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: Dropout
    • Differential Case Design Type: Chrysler 8.75 (741)
    • Gear Ratio: 3.55
    • Pinion Gear Tooth Quantity: 11
    • Pinion Shaft Diameter: 1.375
    • Pinion Spline Count: 29
    • Ring & Pinion Gear Ratio: 3.55
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Diameter: 8.75
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 8.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 39
    • Taxonomy A: Ld Differential
    • Taxonomy B: Ring And Pinion
    • Taxonomy C: Rear
    • Taxonomy D: 3.55
  • Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
Brand: Motive Gear
Position: Rear
Additional Fitment Information:
Vehicle Position
1970 - Plymouth GTX Rear
Motive Gear
1970 Plymouth Fury Differential Ring and Pinion - Rear Motive Gear - Performance Differential Ring and Pinion

P311-0B10E1E    C887373E  New

24228 , C8.42-373-NG , YG C8.42-373

Qty:
In Stock & Ready to Ship
$537.99
Motive Gear Differential Ring and Pinion  Rear
  • For Chrysler 8.75" (742 Housing); Performance Ring and Pinion; 3.73 Ratio; 10 Spline Pinion, Verify Spline Count For Fitment
  • Motive Gear Performance - Performance Differential Ring and Pinion
  • Performance Differential Ring and Pinion
  • Product Attributes:
    • App/Model: Chrysler 8.75 (742)
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: Dropout
    • Differential Case Design Type: Chrysler 8.75 (742)
    • Gear Ratio: 3.73
    • Pinion Gear Tooth Quantity: 11
    • Pinion Shaft Diameter:
      • 1.75
      • 1.750
    • Pinion Spline Count: 10
    • Ring & Pinion Gear Ratio: 3.73
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Diameter: 8.75
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 8.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 41
    • Taxonomy A: Ld Differential
    • Taxonomy B: Ring And Pinion
    • Taxonomy C: Rear
    • Taxonomy D: 3.73
  • Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
Brand: Motive Gear
Position: Rear
Additional Fitment Information:
Vehicle Position
1970 - Plymouth Fury Rear
Motive Gear
1972 Plymouth Fury I Differential Ring and Pinion - Rear Motive Gear - Performance Differential Ring and Pinion

P311-274C646    C887373L  New

24239 , 36015 , 69-0373-1 , 722C730A , C8.89-373-NG , YG C8.89-373 , ZG C8.89-373

Qty:
In Stock & Ready to Ship
$379.99
Motive Gear Differential Ring and Pinion  Rear
  • For Chrysler 8.75" (489 Housing); Performance Ring and Pinion; 3.73 Ratio; 29 Spline Pinion, Verify Spline Count For Fitment
  • Motive Gear Performance - Performance Differential Ring and Pinion
  • Performance Differential Ring and Pinion
  • Product Attributes:
    • App/Model: Chrysler 8.75 (489)
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: Dropout
    • Differential Case Design Type: Chrysler 8.75 (489)
    • Gear Ratio: 3.73
    • Pinion Gear Tooth Quantity: 11
    • Pinion Shaft Diameter: 1.875
    • Pinion Spline Count: 29
    • Ring & Pinion Gear Ratio: 3.73
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Diameter: 8.75
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 8.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 41
    • Taxonomy A: Ld Differential
    • Taxonomy B: Ring And Pinion
    • Taxonomy C: Rear
    • Taxonomy D: 3.73
  • Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
Brand: Motive Gear
Position: Rear
Additional Fitment Information:
Vehicle Position
1972 - Plymouth Fury I Rear
Motive Gear
1967 Plymouth Fury Differential Ring and Pinion - Rear Motive Gear - Performance Differential Ring and Pinion

P311-34BAEA4    C887391E  New

24009 , 69-0375-1 , 690375-1 , C8.42-390-NG , YG C8.42-390

Qty:
In Stock & Ready to Ship
$519.99
Motive Gear Differential Ring and Pinion  Rear
  • For Chrysler 8.75" (742 Housing); Performance Ring and Pinion; 3.91 Ratio; 10 Spline Pinion, Verify Spline Count For Fitment
  • Motive Gear Performance - Performance Differential Ring and Pinion
  • Performance Differential Ring and Pinion
  • Product Attributes:
    • App/Model: Chrysler 8.75 (742)
    • California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Cover Bolt Quantity: Dropout
    • Differential Case Design Type: Chrysler 8.75 (742)
    • Gear Ratio: 3.91
    • Pinion Gear Tooth Quantity: 11
    • Pinion Shaft Diameter:
      • 1.75
      • 1.750
    • Pinion Spline Count: 10
    • Ring & Pinion Gear Ratio: 3.91
    • Ring Gear Bolt Quantity: 12
    • Ring Gear Diameter: 8.75
    • Ring Gear Material: 8620 Steel
    • Ring Gear Outside Diameter: 8.75
    • Ring Gear Rotation: Standard
    • Ring Gear Tooth Quantity: 43
    • Taxonomy A: Ld Differential
    • Taxonomy B: Ring And Pinion
    • Taxonomy C: Rear
    • Taxonomy D: 3.91
  • Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
Brand: Motive Gear
Position: Rear
Additional Fitment Information:
Vehicle Position
1967 - Plymouth Fury Rear