Finish Selecting Your Vehicle to Shop For Your Control Arm

Choose a Year for your Suzuki Esteem 's Control Arm

  • 2002
  • 2001
  • 2000
  • 1999
  • 1998
  • 1997
  • 1996
  • 1995

Shop By Brand

The Following brands are available based on your search.

  • Moog
    Moog
  • Vaico
    Vaico

Shop By Related Suspension Control Arm Parts

Shop below for all Suspension Control Arm related parts for your Suzuki Esteem


Shop for Top Selling Genuine Suzuki Esteem Control Arms

  • We Stock the following top leading brands, including Moog, Vaico
  • Constantly Updated Inventory of Suzuki Esteem Replacement Control Arm Parts

We also have Control Arm parts for other Suzuki models, including Aerio, Esteem, Forenza, Grand Vitara, Reno, Sidekick, Verona, XL7.


Moog
1995 Suzuki Esteem Suspension Control Arm Moog - w/Ball Joint & Bushings

P311-3BB1A35    W0133-1644823  New

Qty:
In Stock & Ready to Ship
$270.54
Moog Suspension Control Arm
  • R-Series (RK)
  • with Ball Joint and Bushings
  • w/Ball Joint & Bushings
  • Front - Right
Brand: Moog
Additional Fitment Information:
Vehicle
1995 - Suzuki Esteem
Moog
1995 Suzuki Esteem Suspension Control Arm Moog - w/Ball Joint & Bushings

P311-36DFD43    W0133-1644822  New

Qty:
In Stock & Ready to Ship
$256.81
Moog Suspension Control Arm
  • R-Series (RK)
  • with Ball Joint and Bushings
  • w/Ball Joint & Bushings
  • Front - Left
Brand: Moog
Additional Fitment Information:
Vehicle
1995 - Suzuki Esteem
Moog
1997 Suzuki Esteem Suspension Control Arm Moog - w/Ball Joint & Bushings

P311-3BB1A35    W0133-1644823  New

Qty:
In Stock & Ready to Ship
$270.54
Moog Suspension Control Arm
  • R-Series (RK)
  • w/Ball Joint & Bushings
Brand: Moog
Additional Fitment Information:
Vehicle
1997 - Suzuki Esteem
Moog
2000 Suzuki Esteem Suspension Control Arm Moog - w/Ball Joint & Bushings

P311-36DFD43    W0133-1644822  New

Qty:
In Stock & Ready to Ship
$256.81
Moog Suspension Control Arm
  • R-Series (RK)
  • w/Ball Joint & Bushings
Brand: Moog
Additional Fitment Information:
Vehicle
2000 - Suzuki Esteem
Vaico
1999 Suzuki Esteem Suspension Control Arm - Front Right Lower 4 Cyl 1.8L Vaico - VAICO

P311-0D95A33    V64-9509  New

45201-60G00 , 45201-60G00-000 , 45201-63G00 , 45201-63G00-000 , 45201-63G01 , 45201-63G01-000 , 4520163G01

Qty:
In Stock & Ready to Ship
$43.72
Vaico Suspension Control Arm  Front Right Lower
  • Grade: Aftermarket With OE No. 4520163G01
  • VAICO
  • Product Attributes:
    • Material: Steel
    • Packaging Depth [cm]: 51
    • Packaging height [cm]: 6,9
    • Packaging width [cm]: 26
    • Paired article numbers: V64-9510
    • Part number of the recommended special tools: V99-1020
    • Steering arm type: Control Arm
    • Weight [kg]: 3,05
Brand: Vaico
Position: Front Right Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1999 - Suzuki Esteem Front Right Lower L 4 Cyl 1.8L - 1790
Moog
2002 Suzuki Esteem Suspension Control Arm Moog - with Ball Joint Assembly

P311-3BB1A35    W0133-1644823  New

Qty:
In Stock & Ready to Ship
$270.54
Moog Suspension Control Arm
  • R-Series (RK)
  • with Ball Joint Assembly
Brand: Moog
Additional Fitment Information:
Vehicle
2002 - Suzuki Esteem
Moog
1999 Suzuki Esteem Suspension Control Arm Moog - with Ball Joint Assembly

P311-36DFD43    W0133-1644822  New

Qty:
In Stock & Ready to Ship
$256.81
Moog Suspension Control Arm
  • R-Series (RK)
  • with Ball Joint Assembly
Brand: Moog
Additional Fitment Information:
Vehicle
1999 - Suzuki Esteem

Latest Car Advice

CarJunky AutoAdvice

control arm shaft removal

Showing 6 out of 7 Posts | Show 1 Hidden Posts
Question From biil9 on control arm shaft removal

i have a tubular upper control arm for an 89 mustang. i took off the bronze nuts on each end but i am not sure what the best method is to remove the control arm shaft. the shaft turns freely by hand. any help would be appreciated. thank you.

barry

Response From Hammer Time

The bushings have to be pressed out the remove the shaft from the control arm.

Response From Discretesignals

That's funny. The foxes didn't have a control arm shafts in the lower control arms. The lower control arm has two bolts with nuts that slide through the frame and the bushings on the control arms to hold it in place. Doesn't have an upper because the fox uses front struts. I have one sitting in the garage as I type this.

Must have some sort of front end modification done on it.

Response From Hammer Time Top Rated Answer

He did specify upper.

Response From Discretesignals

If he stated upper, then his must be really special because that fox doesn't use upper control arms.


Response From Hammer Time

1979-1993 Mustang :: Control Arms





http://www.ebay.com/itm/FORD-MUSTANG-2-II-TUBULAR-CONTROL-ARMS-UPPER-AND-LOWER-/290672309193?hash=item43ad6b73c9&item=290672309193&pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr

Response From biil9

ok. i'll take them to my mechanic. thank you.

2000 Sunfire control arm

Showing 2 out of 2 Posts
Question From don on 2000 Sunfire control arm

Does anyone know if you can replace the rear lower control arm bushing ( looks like a hockey puck ) on the front suspension of a 2000 Pontiac Sunfire without removing the whole lower control arm out of the car?

Response From Double J Top Rated Answer

No...

To my knowledge the control arm has to be removed and inserted into a vice and a special bushing remover/installer tool is needed.

click here....

Control Arms Pontiac G6

Showing 2 out of 4 Posts | Show 2 Hidden Posts
Question From nbttr2002 on Control Arms Pontiac G6

I have to replace the control arms on my Pontiac G6 2006. Does anyone know how to do it? Pictures and diagrams would be nice.
Thanks for your help!

Response From Hammer Time

Front or rear?

Response From nbttr2002 Top Rated Answer

Front control arms

Response From Hammer Time

Here ya go

'87 S10 2wd lower control arm bushings

Showing 2 out of 2 Posts
Question From Guest on '87 S10 2wd lower control arm bushings

I just finished replacing totality shot upper control arm bushings. Is there any way to see or test if lower control arm bushings need to be replaced? Wheel off ground does not move when shaken like it did before upper replacement. Vehicle has 290K miles on it.

Response From DanD Top Rated Answer

Lower control arm bushings are a little tougher to check because they will always have some tension (load) from the spring applied.
The best way I’ve found is with the wheels and control arms hanging free in the air (vehicle lifted by the frame);try with a pry bar to move the control arm.
If there is any movement, other then the stretch of the rubber bushing; replace it.
Also look very close to where the through bolt(s) goes through the bushing; it should look centered in the rubber; along with no cracks or splits in the rubber of the bushing.

Dan.

Replaced lower control arm/ball joint now have issue...

Showing 2 out of 3 Posts | Show 1 Hidden Posts
Question From Guest on Replaced lower control arm/ball joint now have issue...

Last Thursday my ball joint (lower control arm) broke on the passenger side of my 1997 Eagle Talon ESI 2.0 DOHC. I replaced the control arm on Saturday and with a great deal of nervousness have been driving it Sunday and today (this was my first control arm replacement).

The car rides perfect! Better than it did when I bought it. But for some reason whenever I turn the car to the right there is a growl, a very distinct growl, which appears to emanate from the driver side of the car. Six months ago I had the driver's side lower control arm/ball joint replaced by a professional so I'm pretty sure that I'm ok on ball joints and control arms.

Does anybody have any ideas as to what could be causing the growl?

130,000 miles.

Response From Carcrazy1

Make sure that whenever you go for a replacement of any part the wheel alingnment has also to be checked.

It takes a few minuites but it will be flawless

()

Response From Loren Champlain Sr Top Rated Answer

The symptoms suggest a left front wheel bearing. Of course, check the brakes, first.