Buy Discount Chrysler Pacifica Parts

Finish Selecting Your Vehicle

Choose a Year for your Chrysler Pacifica

  • 2022
  • 2021
  • 2020
  • 2019
  • 2018
  • 2017
  • 2008
  • 2007
  • 2006
  • 2005
  • 2004

Showing 1 - 10 of 4,159 Products.

Refine Your Search

Mopar
2007 Chrysler Pacifica Radiator Cap Mopar

P311-117F470    W0133-1668798  New

Qty:
In Stock & Ready to Ship
$25.68
Mopar Radiator Cap
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Mopar
Additional Fitment Information:
Vehicle
2007 - Chrysler Pacifica
Mopar
2005 Chrysler Pacifica Fuel Tank Cap Mopar

P311-5B1EDE7    W0133-2164028  New

Qty:
In Stock & Ready to Ship
$26.79
Mopar Fuel Tank Cap
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Mopar
Additional Fitment Information:
Vehicle
2005 - Chrysler Pacifica
Mopar
2005 Chrysler Pacifica Engine Oil Filter Mopar

P311-45F5172    W0133-2040707  New

Qty:
In Stock & Ready to Ship
$33.60
Mopar Engine Oil Filter
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Spin-On
Brand: Mopar
Additional Fitment Information:
Vehicle
2005 - Chrysler Pacifica
Spectra Premium
2007 Chrysler Pacifica Ignition Coil 6 Cyl 3.8L Spectra Premium

P311-3D77923    W0133-1954193  New

Qty:
In Stock & Ready to Ship
$88.33
Spectra Premium Ignition Coil
Brand: Spectra Premium
Additional Fitment Information:
Vehicle Block Engine CID CC
2007 - Chrysler Pacifica V 6 Cyl 3.8L 231 3778
Delphi
2008 Chrysler Pacifica Ignition Coil 6 Cyl 3.8L Delphi

P311-149E2A4    W0133-1954193  New

Qty:
In Stock & Ready to Ship
$90.94
Delphi Ignition Coil
  • 3/36 Warranty
Brand: Delphi
Additional Fitment Information:
Vehicle Block Engine CID CC
2008 - Chrysler Pacifica V 6 Cyl 3.8L 231 3778
Mopar
2008 Chrysler Pacifica Transmission Filter Mopar

P311-33CB150    W0133-1883097  New

Qty:
In Stock & Ready to Ship
$35.54
Mopar Transmission Filter
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Mopar
Additional Fitment Information:
Vehicle Submodel
2008 - Chrysler Pacifica Limited
Vaico
2008 Chrysler Pacifica Transmission Filter Vaico

P311-3B8B000    W0133-1883097  New

Qty:
In Stock & Ready to Ship
$39.30
Vaico Transmission Filter
  • Includes O-Ring
Brand: Vaico
Additional Fitment Information:
Vehicle Submodel
2008 - Chrysler Pacifica Touring
K&N
2008 Chrysler Pacifica Engine Oil Filter 6 Cyl 3.8L K&N - Performance Gold Oil Filter

P311-0F56602    HP-1002  New

04E115561 , 04E115561H , 1220645 , 491056 , 51215 , 51348 , 51391 , 51785 , 5205002 , 5205002S , 57023 , 57181 , 9091520003 , 9091520004 , 90915YZZD1 , BE8Z6731AB , C2Z21964 , CH9614 , EX3614 , FL793 , FL910 , FL910S , HP7 , L10028 , L10241 , LF0514302A , LF0514302B , LR025306 , M1102 , M1102A , MO241 , PF1245 , PF1787 , PF53 , PH16 , PH2951 , PH3614 , PH6022 , PH7575 , PH9342 , PH9566 , PS1002 , SS1002 , TG16 , TG3614 , TG9614 , XG16 , XG3614 , XG9614

Qty:
In Stock & Ready to Ship
$15.47
K&N Engine Oil Filter
  • Oil Filter
  • H-3.75 in.; OD-3 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-14 Premium Oil Filter w/Wrench Off Nut; Spin On
  • OIL FILTER; AUTOMOTIVE
  • Performance Gold Oil Filter
  • Product Attributes:
    • Anti-Drain Back Valve: Yes
    • Bypass Valve: Yes
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Item Height: 3.750 In. (95mm)
    • Item Weight: 0.800 Lbs. (0.4 Kg)
    • Outside Diameter: 3.000 In. (76mm)
    • Package Material: Paperboard
    • Package Type: Box
    • Product Box Height: 4.000 In. (102mm)
    • Product Box Length: 3.190 In. (81mm)
    • Product Box Width: 3.190 In. (81mm)
    • PSI Relief Valve: 11-14
    • Removal Nut: Yes
    • Removal Nut Size: 1.000 In.
    • Style: Canister
    • Thread Size: .750 In. - 16
    • Title: K&n Hp-1002 Oil Filter
    • WARNING CA Proposition 65: No
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Brand: K&N
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
2008 - Chrysler Pacifica LX V 6 Cyl 3.8L 231 3778
K&N
2006 Chrysler Pacifica Engine Oil Filter 6 Cyl 3.5L K&N - Performance Gold Oil Filter

P311-56FE6F6    HP-2004  New

1220185 , 1220325 , 122B185 , 51068 , 51084 , 51085 , 51362 , 51521 , AFL5071 , EFL037 , EFL039 , EFL090 , EFL37 , FL137A , FL173A , FL228 , FL259 , FL264 , FL293 , FL300 , FL332 , FL787 , FL842 , HP3 , L10017 , L10018 , L14670 , L17200 , L18207 , L20020 , L20081 , L22167 , L25195 , L27234 , L27261 , L34875 , M1204 , M1204A , PF1180 , PF13 , PF20 , PF2136 , PF44011 , PFW1103 , PH16 , PH2844 , PH2857 , PH2861A , PH2978 , PH43 , PH7 , PH7226 , PH8994 , PH9B , PS2004 , S7328 , S8994 , SS2004 , TG16 , TG3614 , X122 , XG16 , XG3614

Qty:
In Stock & Ready to Ship
$16.40
K&N Engine Oil Filter
  • Oil Filter
  • H-4 in.; OD-3.66 in.; 3/4 In. - 16 UNF-2B Thread; psi Relief Valve 8-11 Premium Oil Filter w/Wrench Off Nut
  • OIL FILTER; AUTOMOTIVE
  • Performance Gold Oil Filter
  • Product Attributes:
    • Anti-Drain Back Valve: Yes
    • Bypass Valve: Yes
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Item Height: 4.000 In. (102mm)
    • Item Weight: 1.200 Lbs. (0.6 Kg)
    • Outside Diameter: 3.656 In. (93mm)
    • Package Material: Paperboard
    • Package Type: Box
    • Product Box Height: 4.500 In. (114mm)
    • Product Box Length: 3.880 In. (98mm)
    • Product Box Width: 3.880 In. (98mm)
    • PSI Relief Valve: 8-11
    • Removal Nut: Yes
    • Removal Nut Size: 1.000 In.
    • Style: Canister
    • Thread Size: .750 In. - 16unf-2b
    • Title: K&n Hp-2004 Oil Filter
    • WARNING CA Proposition 65: No
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Brand: K&N
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Chrysler Pacifica V 6 Cyl 3.5L 215 3497
Mahle
2008 Chrysler Pacifica Exhaust Gas Recirculation (EGR) Valve Gasket Mahle

P311-4249FA3    W0133-1668927  New

Qty:
In Stock & Ready to Ship
$9.68
Mahle Exhaust Gas Recirculation (EGR) Valve Gasket
  • EGR Tube
Brand: Mahle
Additional Fitment Information:
Vehicle
2008 - Chrysler Pacifica

Showing 1 - 10 of 4,159 Products.


Latest Car Advice

CarJunky AutoAdvice

2006, Chrysler Pacifica will not start

Showing 4 out of 6 Posts | Show 2 Hidden Posts
Question From Trumps11 on 2006, Chrysler Pacifica will not start

I am not a very mechanically inclined person but here goes.

2006
Chrysler
Pacifica
3.5 liter V6
150,000 km

For the past few months the car has started intermittently. I replaced the battery and appeared to solve the problem. It now will not start unless I boost the car. Once the car is started it runs great. Not sure what might be the problem.

Thanks

Response From nickwarner

clean the power and ground terminals both at the battery and at the other ends. They need to be shiny and tight. Put some dielectric grease on them when you put them back together to hold off future corrosion.

When the contact surface of the battery cable gets corroded, it won't allow enough amperage through to allow the car to start. The jumper cables hook onto the outer surface of that end, so together enough amps can get through to start the car. Once the car is running, it requires far less amperage so a marginal connection will still supply enough current.

Check for corrosion and give it a good cleaning and let us know what you find.

Response From Trumps11

Tried this but to no avail. Any other thoughts?

Response From Hammer Time Top Rated Answer

Have the battery charged and tested first. Once you have a known good battery, then you can have the charging system tested and if that checks out good, then you test for a parasitic draw when it's parked.

Response From Trumps11

Thanks for the help everyone. Even though I had a new battery it was the battery. It was not holding a charge. I also tested my alternator using a voltmeter and it appears to be working.

Response From Hammer Time

You might want to make sure that you don't have any parasitic draw on it.

There is a procedure for finding a battery draw like that.

You will need a digital ammeter and a jumper wire with clips on the ends to do this.
First rig any door switches so you can have a door open without triggering the interior lights and unplug the hood light. Remove one battery cable and attach the meter in series between the battery cable and battery post. Take the jumper wire and also attach it the same way. Leave the jumper wire on for at least 10 minutes to expire all the automatic timers. Now remove the jumper wire and read the meter. Anything over 50ma is too much draw. The way you locate this is to start removing fuses one at a time until the meter drops to normal level. This will be the circuit with something staying on. Determine what components are part of that circuit and check them individually until the problem is isolated.

Cruise will not work on 2004 Chrysler Pacifica

Showing 2 out of 2 Posts
Question From swisdom on Cruise will not work on 2004 Chrysler Pacifica

2004 chrysler pacifica 155000 miles. Try turn on the cruise and the light comes on and goes right back off. Just got this vehicle and could use some help too try too fix it. If i can do it or if it needs too go into the shop
Thanks

Response From Discretesignals Top Rated Answer

Your going need an enhanced scan tool that can access the manufacture side of the PCM to see if there are any trouble codes being stored related to the cruise control system.

2007 chrysler Pacifica fuel light reading empty.

Showing 2 out of 2 Posts
Question From browns2129 on 2007 chrysler Pacifica fuel light reading empty.

I have a 2007 Chrysler Pacifica that the fuel light is on and the miles are reading 0 Also The check engine light is on. I know that the vehicle has gas in it. A guy from work told me to put the brake on and try turning the key on 11 times to reset this. This did not work! Any suggestions?

Response From Hammer Time Top Rated Answer

I don't know what he's trying to do but you likely have a bad sender in the fuel tank. If you momentarily ground the fuel gauge wire, it should jump to full. If not check the ground and if that's OK, the sender is bad.

04 Chrysler Pacifica no defrost

Showing 5 out of 5 Posts
Question From Marlorup on 04 Chrysler Pacifica no defrost

Hello everyone, I have an "04" Chrysler Pacifica with just over 112k miles. 3.5 V6. AWD. I get good air flow through the front vents and rear seat heater vents, but little or no air flow up to the defroster vent at the top of the dash. I checked the cabin filter, it was a little dirty, so I used my shop-vac to clean it up and reinstalled it.
I'm not a full blown mechanic, but I can help myself. Any suggestions would be greatly appreciated.
Thank you all very much. Mark.

Response From zmame Top Rated Answer

Could be blend door motor, blend door jammed or broken or selector switch, hard to say.

does the floor vents work when you go full floor?

Response From Hammer Time

I think you meant "Mode door" not blend door, right?

Response From zmame

yes, sorry

Response From Tom Greenleaf

It's broken - not working right and AFUED -- Love the PC of it all,

Tom

chrysler pacifica dies when put in reverse

Showing 2 out of 2 Posts
Question From shalen34 on chrysler pacifica dies when put in reverse

i have a 2006 Chrysler pacifica 3.5 liter I recently bought this car with some exhaust problems but car ran great. we fixed the exhaust problems but now if I put in reverse it dies. I can rev it up and put it in reverse and it will go back but as soon as I let off the petal it dies. at that point it will crank over but not start back up. if I put it in neutral and roll it a foot and put it back in park fires right up. any help would be amazing.

Response From Discretesignals Top Rated Answer

Any trouble codes stored in the engine computer? If so, what are the numbers. Did this start after you did the exhaust work? Did you disconnect the battery?

Maybe the engine controller doesn't know the transmission is being put into reverse, so it doesn't adjust the idle for the added load or it lost the learned idle memory if you disconnected power.