802.589.0911 Live Chat With Us

Finish Selecting Your Vehicle to Shop For Your Brake Master Cylinder

Choose a Year for your Volkswagen 's Brake Master Cylinder

  • 2015
  • 2014
  • 2013
  • 2012
  • 2011
  • 2010
  • 1994
  • 1993
  • 1992
  • 1991
  • 1990
  • 1989
  • 1988
  • 1987
  • 1986
  • 1985
  • 1979
  • 1978
  • 1977
  • 1976
  • 1975
  • 1974
  • 1973
  • 1972
  • 1971
  • 1970
  • 1969
  • 1968
  • 1967
  • 1966
  • 1965
  • 1964
  • 1963
  • 1962
  • 1961
  • 1960
  • 1959
  • 1958
  • 1957
  • 1956
  • 1955
  • 1954
  • 1953
  • 1952
  • 1951
  • 1950
Show More Years

Shop By Brand

The Following brands are available based on your search.

  • Cardone
    Cardone
  • Centric
    Centric
  • Dorman
    Dorman
  • FTE
    FTE
  • Raybestos
    Raybestos
  • TRW
    TRW
  • Volkswagen
    Volkswagen
  • Wagner Brakes
    Wagner Brakes

Shop By Related Brake Master Cylinder Parts

Shop below for all Brake Master Cylinder related parts for your Volkswagen


Shop for Top Selling Genuine Volkswagen Transporter Brake Master Cylinders

  • We Stock the following top leading brands, including Centric, Volkswagen, Wagner Brakes, TRW, FTE, Cardone, Dorman, Raybestos
  • Constantly Updated Inventory of Volkswagen Transporter Replacement Brake Master Cylinder Parts

We also have Brake Master Cylinder parts for other Volkswagen models, including Beetle, CC, Cabrio, Cabriolet, Corrado, Eos, EuroVan, Fox, GTI, Golf, Jetta, Karmann Ghia, Passat, Quantum, R32, Rabbit, Rabbit Convertible, Rabbit Pickup, Routan, Scirocco, Super Beetle, Tiguan, Touareg, Transporter, Vanagon.

Centric
Qty:
$70.14
Centric Brake Master Cylinder
  • C-Tek Standard Brake Master Cylinder
  • Fr 5/79
  • C-TEK Standard Brake Master Cylinder
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm
  • Centric Parts offers a full line of C-Tek standard replacement brake and clutch parts for import and domestic vehicles. C-Tek components provide exceptional quality and value. Utilizing world-wide manufacturing sources allows Centric Parts to provide the highest quality replacement parts while maintaining value.
Brand: Centric
Additional Fitment Information:
Vehicle
1979 - Volkswagen Transporter
Volkswagen
1970 Volkswagen Transporter Brake Master Cylinder Volkswagen

P311-47C759D    211611021TEC  New

Qty:
$52.64
Volkswagen Brake Master Cylinder
  • IAP Performance
Brand: Volkswagen
Additional Fitment Information:
Vehicle
1970 - Volkswagen Transporter
Volkswagen
1953 Volkswagen Transporter Brake Master Cylinder Volkswagen

P311-1CB5A39    AC611200EC  New

Qty:
$38.24
Volkswagen Brake Master Cylinder
  • 22.20mm; with Reservoir; To Chassis # 217 019 488; Standard Version; IAP Performance Master Cylinder; IAP Performance
Brand: Volkswagen
Additional Fitment Information:
Vehicle
1953 - Volkswagen Transporter
Wagner Brakes
1987 Volkswagen Transporter Brake Master Cylinder Wagner Brakes

P311-59E863F    MC97071  New

39677 , MC-39677 , M-20206 , 12180 , 130.33206 , 18030624 , 251611021C , 18M382 , E97071 , 130-33206 , M39677 , 072-8089

Qty:
$126.90
Wagner Brakes Brake Master Cylinder
  • Brake Master Cylinder
  • 15/16" Bore ATE Brake System
  • Wagner® Brake hydraulics deliver improved OE-design products to the aftermarket giving you the capability to repair and improve a brake system with the finest products possible. Coverage for foreign, domestic, passenger car, light trucks, SUVs and vans.
Brand: Wagner Brakes
Additional Fitment Information:
Vehicle
1987 - Volkswagen Transporter
Wagner Brakes
1991 Volkswagen Transporter Brake Master Cylinder Wagner Brakes

P311-59E863F    MC97071  New

39677 , MC-39677 , M-20206 , 12180 , 130.33206 , 18030624 , 251611021C , 18M382 , E97071 , 130-33206 , M39677 , 072-8089

Qty:
$126.90
Wagner Brakes Brake Master Cylinder
  • Brake Master Cylinder
  • 15/16" Bore
  • Wagner® Brake hydraulics deliver improved OE-design products to the aftermarket giving you the capability to repair and improve a brake system with the finest products possible. Coverage for foreign, domestic, passenger car, light trucks, SUVs and vans.
Brand: Wagner Brakes
Additional Fitment Information:
Vehicle
1991 - Volkswagen Transporter
Wagner Brakes
1953 Volkswagen Transporter Brake Master Cylinder Wagner Brakes

P311-047D3A5    MC6086  New

MC-6086 , 6086 , M6086 , 130.58002

Qty:
$62.87
Wagner Brakes Brake Master Cylinder
  • Brake Master Cylinder
  • 1" Bore Manual Brakes
  • Wagner® Brake hydraulics deliver improved OE-design products to the aftermarket giving you the capability to repair and improve a brake system with the finest products possible. Coverage for foreign, domestic, passenger car, light trucks, SUVs and vans.
Brand: Wagner Brakes
Additional Fitment Information:
Vehicle
1953 - Volkswagen Transporter
TRW
1979 Volkswagen Transporter Brake Master Cylinder TRW

P311-29C503A    W0133-1605608  New

Qty:
$107.85
TRW Brake Master Cylinder
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 23.81mm Diameter Power Brake
Brand: TRW
Additional Fitment Information:
Vehicle
1979 - Volkswagen Transporter
FTE
1969 Volkswagen Transporter Brake Master Cylinder 4 Cyl 1.6L FTE

P311-5D9F0C5    W0133-1604889  New

Qty:
$374.79
FTE Brake Master Cylinder
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 22.2mm Diameter - Excludes Power Brake
Brand: FTE
Additional Fitment Information:
Vehicle Block Engine CID CC
1969 - Volkswagen Transporter H 4 Cyl 1.6L 97 1584
FTE
1992 Volkswagen Transporter Brake Master Cylinder FTE

P311-3D32F9D    W0133-1607364  New

Qty:
$178.93
FTE Brake Master Cylinder
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 23.8mm Diameter
Brand: FTE
Additional Fitment Information:
Vehicle
1992 - Volkswagen Transporter
Cardone
1964 Volkswagen Transporter Brake Master Cylinder Cardone - New Master Cylinder

P311-0CF0A34    13-1560  New

211611021AE , 211611021AA

Qty:
$106.68
Cardone Brake Master Cylinder
  • with Stoplight Switches on Master Cylinder; Supplied w/o Reservoir
  • New Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 0.937"
    • Bore Diameter (N-1): 1.1"
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Castings Feature A Premium Protective Coating To Minimize Corrosion And Extend Unit Life
      • Mounting Hardware And Bleeding Kits Are Supplied With Every Unit To Make The Installation And Bleeding Process Faster And Easier (where Applicable)
      • Only O.e.-quality Seals And Cups Are Used To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
      • Seals Are Temperature-cycled From -30°f To +220°f To Ensure Reliable Performance During Your Daily Commute
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Cast Iron
    • Mounting Hole Quantity: 2
    • Package Contents: Master Cylinder
    • Port Count: 4
    • Primary Port Size: M10 X 1.0
    • Product Condition: New
    • Secondary Port Size: M10 X 1.0
  • Building on decades of experience using reverse engineering to remanufacture brake products, CARDONE engineers have meticulously designed our CARDONE® New Master Cylinders to match O.E. performance. Supplied with new O.E.-quality seals and cups, each unit is endurance-tested to ensure perfect fit, function and reliable performance.
Brand: Cardone
Additional Fitment Information:
Vehicle
1964 - Volkswagen Transporter
Cardone
1992 Volkswagen Transporter Brake Master Cylinder Cardone - New Master Cylinder

P311-52DC8DB    13-2514  New

357611019A , 1H1611019B

Qty:
$58.85
Cardone Brake Master Cylinder
  • ; Supplied w/Reservoir
  • New Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 0.875"
    • Bore Diameter (N-1): 34mm
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Castings Feature A Premium Protective Coating To Minimize Corrosion And Extend Unit Life
      • Mounting Hardware And Bleeding Kits Are Supplied With Every Unit To Make The Installation And Bleeding Process Faster And Easier (where Applicable)
      • Only O.e.-quality Seals And Cups Are Used To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
      • Seals Are Temperature-cycled From -30°f To +220°f To Ensure Reliable Performance During Your Daily Commute
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Other Port(s) Size: M10 X 1.0
    • Package Contents: Master Cylinder
    • Port Count: 3
    • Primary Port Size: M10 X 1.0
    • Product Condition: New
    • Reservoir Material: Plastic
    • Reservoir Type: Single
    • Secondary Port Size: M10 X 1.0
  • Building on decades of experience using reverse engineering to remanufacture brake products, CARDONE engineers have meticulously designed our CARDONE® New Master Cylinders to match O.E. performance. Supplied with new O.E.-quality seals and cups, each unit is endurance-tested to ensure perfect fit, function and reliable performance.
Brand: Cardone
Additional Fitment Information:
Vehicle BrakeABS
1992 - Volkswagen Transporter Non-ABS
Cardone
1985 Volkswagen Transporter Brake Master Cylinder Cardone - New Master Cylinder

P311-2A39868    13-2207  New

251611021C

Qty:
$104.99
Cardone Brake Master Cylinder
  • ; Supplied w/o Reservoir
  • New Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 0.937"
    • Bore Diameter (N-1): 28mm
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Castings Feature A Premium Protective Coating To Minimize Corrosion And Extend Unit Life
      • Mounting Hardware And Bleeding Kits Are Supplied With Every Unit To Make The Installation And Bleeding Process Faster And Easier (where Applicable)
      • Only O.e.-quality Seals And Cups Are Used To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
      • Seals Are Temperature-cycled From -30°f To +220°f To Ensure Reliable Performance During Your Daily Commute
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Cast Iron
    • Mounting Hole Quantity: 2
    • Other Port(s) Size: M10 X 1.0, M10 X 1.0
    • Package Contents: Master Cylinder
    • Port Count: 4
    • Primary Port Size: M10 X 1.0
    • Product Condition: New
    • Secondary Port Size: M10 X 1.0
  • Building on decades of experience using reverse engineering to remanufacture brake products, CARDONE engineers have meticulously designed our CARDONE® New Master Cylinders to match O.E. performance. Supplied with new O.E.-quality seals and cups, each unit is endurance-tested to ensure perfect fit, function and reliable performance.
Brand: Cardone
Additional Fitment Information:
Vehicle
1985 - Volkswagen Transporter
Cardone
1992 Volkswagen Transporter Brake Master Cylinder Cardone - Reman. Master Cylinder

P311-1F3CAE9    11-2845  Remanufactured

357611019B , 701611019

Qty:
$39.40
Cardone Brake Master Cylinder
  • Remanufactured Master Cylinder
  • ; Supplied w/o Reservoir
  • Reman. Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 0.875"
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Bleeding Kits Are Supplied With The Unit To Make The Bleeding Process Faster And Easier (where Applicable)
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Cast-iron Master Cylinders Feature A Premium Protective Coating To Minimize Rust And Extend Unit Life
      • Only New O.e.-quality Seals And Cups Are Used In The Remanufacturing Process To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Piston Assemblies Are Height-gauged To Ensure The Master Cylinder Equals The O.e. Unit Performance
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Package Contents: Master Cylinder
    • Port Count: 4
    • Primary Port Size: M10 X 1.0
    • Product Condition: Remanufactured
    • Secondary Port Size: M10 X 1.0
  • CARDONE® Remanufactured Master Cylinders are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-quality seals and cups to ensure leak-free, long-lasting performance. Cast-iron master cylinders are treated with a premium protective coating to minimize rust and extend product life. All units are 100% computer tested to ensure perfect fit and function.
Brand: Cardone
Additional Fitment Information:
Vehicle BrakeABS
1992 - Volkswagen Transporter 4-Wheel ABS
Cardone
1964 Volkswagen Transporter Brake Master Cylinder Cardone - Reman. Master Cylinder

P311-03E872B    11-1560  Remanufactured

211611021AE , 211611021AA , 211611021Q

Qty:
$13.50 $59.54
Cardone Brake Master Cylinder
  • Remanufactured Master Cylinder
  • with Stoplight Switches on Master Cylinder; Supplied w/o Reservoir
  • Reman. Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 0.937"
    • Bore Diameter (N-1): 1.1
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Bleeding Kits Are Supplied With The Unit To Make The Bleeding Process Faster And Easier (where Applicable)
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Cast-iron Master Cylinders Feature A Premium Protective Coating To Minimize Rust And Extend Unit Life
      • Only New O.e.-quality Seals And Cups Are Used In The Remanufacturing Process To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Piston Assemblies Are Height-gauged To Ensure The Master Cylinder Equals The O.e. Unit Performance
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Cast Iron
    • Mounting Hole Quantity: 2
    • Package Contents: Master Cylinder
    • Port Count: 6
    • Primary Port Size: M10 X 1.0
    • Product Condition: Remanufactured
    • Secondary Port Size: M10 X 1.0
  • CARDONE® Remanufactured Master Cylinders are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-quality seals and cups to ensure leak-free, long-lasting performance. Cast-iron master cylinders are treated with a premium protective coating to minimize rust and extend product life. All units are 100% computer tested to ensure perfect fit and function.
Brand: Cardone
Additional Fitment Information:
Vehicle
1964 - Volkswagen Transporter
Cardone
1992 Volkswagen Transporter Brake Master Cylinder Cardone - Reman. Master Cylinder

P311-49B4FF5    11-2514  Remanufactured

357611019A , 1H1611019B

Qty:
$37.30
Cardone Brake Master Cylinder
  • Remanufactured Master Cylinder
  • ; Supplied w/o Reservoir
  • Reman. Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 0.875"
    • Bore Diameter (N-1): 1.335
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Bleeding Kits Are Supplied With The Unit To Make The Bleeding Process Faster And Easier (where Applicable)
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Cast-iron Master Cylinders Feature A Premium Protective Coating To Minimize Rust And Extend Unit Life
      • Only New O.e.-quality Seals And Cups Are Used In The Remanufacturing Process To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Piston Assemblies Are Height-gauged To Ensure The Master Cylinder Equals The O.e. Unit Performance
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Package Contents: Master Cylinder
    • Port Count: 4
    • Primary Port Size: M10 X 1.0
    • Product Condition: Remanufactured
    • Secondary Port Size: M10 X 1.0, M10 X 1.0
  • CARDONE® Remanufactured Master Cylinders are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-quality seals and cups to ensure leak-free, long-lasting performance. Cast-iron master cylinders are treated with a premium protective coating to minimize rust and extend product life. All units are 100% computer tested to ensure perfect fit and function.
Brand: Cardone
Additional Fitment Information:
Vehicle BrakeABS
1992 - Volkswagen Transporter Non-ABS
Cardone
1985 Volkswagen Transporter Brake Master Cylinder Cardone - Reman. Master Cylinder

P311-41C1D0B    11-2207  Remanufactured

251611021C

Qty:
$20.70 $61.66
Cardone Brake Master Cylinder
  • Remanufactured Master Cylinder
  • ; Supplied w/o Reservoir
  • Reman. Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 0.937"
    • Bore Diameter (N-1): 1.1
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Bleeding Kits Are Supplied With The Unit To Make The Bleeding Process Faster And Easier (where Applicable)
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Cast-iron Master Cylinders Feature A Premium Protective Coating To Minimize Rust And Extend Unit Life
      • Only New O.e.-quality Seals And Cups Are Used In The Remanufacturing Process To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Piston Assemblies Are Height-gauged To Ensure The Master Cylinder Equals The O.e. Unit Performance
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Package Contents: Master Cylinder
    • Port Count: 4
    • Primary Port Size: M10 X 1.0
    • Product Condition: Remanufactured
    • Secondary Port Size: M10 X 1.0, M10 X 1.0
  • CARDONE® Remanufactured Master Cylinders are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-quality seals and cups to ensure leak-free, long-lasting performance. Cast-iron master cylinders are treated with a premium protective coating to minimize rust and extend product life. All units are 100% computer tested to ensure perfect fit and function.
Brand: Cardone
Additional Fitment Information:
Vehicle
1985 - Volkswagen Transporter
Dorman
1953 Volkswagen Transporter Brake Master Cylinder Dorman

P311-26BC4B5    M6086  New

10-57580 , 8123176 , 131.58002 , 637423 , 115964 , 3216544 , MC511190 , 130.58002 , 13-57580 , 3106509 , M900019 , F6086 , MC6086 , A556 , 5472938 , 13-6086

Qty:
$74.36
Dorman Brake Master Cylinder
  • ; Bore: 1 In. w/Manual Brakes
  • Product Attributes:
    • Bore Diameter: 1 In.
    • California Proposition 65: Warning: Cancer And Reproductive Harm ?Çô Www.p65warnings.ca.gov
    • Material: Cast Iron
    • Package Contents: Master Cylinder
    • Rearward Outlet Size: 1/2-20
Brand: Dorman
Additional Fitment Information:
Vehicle
1953 - Volkswagen Transporter
Dorman
2010 Volkswagen Transporter Brake Master Cylinder Dorman

P311-063BCF0    M630633  New

F143049 , MC391036 , 130.33001 , 130.33130 , 11-3279 , 11-4027 , 95535501520 , 11-3863 , 95535501500 , 7L0611019E , MC143049 , 13-3279 , 7H0611019B

Qty:
$76.41
Dorman Brake Master Cylinder
  • ; Bore: 1.0625 In.
  • Product Attributes:
    • Bore Diameter: 1.063 In.
    • California Proposition 65: Warning: Cancer And Reproductive Harm ?Çô Www.p65warnings.ca.gov
    • Forward Outlet Size: M12 X 1.0
    • Material: Aluminum
    • Number of Outlets: 2
    • Package Contents: Master Cylinder
    • Rearward Outlet Size: M12 X 1.0
    • Thread Pitch: 1.0
Brand: Dorman
Additional Fitment Information:
Vehicle
2010 - Volkswagen Transporter
Raybestos
2014 Volkswagen Transporter Brake Master Cylinder Raybestos - Element3; New

P311-4AA1A56    MC391231  New

11-3414 , 1K1614019K , V0290(AH) , 1K1614019 , 11-3874 , 1K1614019D , 130.33124

Qty:
$84.04
Raybestos Brake Master Cylinder
  • Element3; New
  • Product Attributes:
    • Box Height: 4.500
    • Box Length: 9.125
    • Box Width: 5.500
    • Country of Origin: Cn
    • Number of Ports: 2
    • Primary Port Thread A: M12x1
    • Secondary Port Thread A: M12x1
    • Weight, Gross: 1.400
Brand: Raybestos
Additional Fitment Information:
Vehicle
2014 - Volkswagen Transporter
Raybestos
1992 Volkswagen Transporter Brake Master Cylinder Raybestos - Element3; New

P311-41B5994    MC39877  New

MC133 , 130.33408 , NM52845 , 13-2845 , 357611019B , MC500030 , V0110 , 072-8701 , 11-2514 , 16607 , H2294802 , E150457 , 11-2845 , 131.33408 , 83-96408 , M39877 , 13-2514 , MN52845 , 12521 , CM1907 , M02408 , R128332

Qty:
$84.97
Raybestos Brake Master Cylinder
  • Element3; New
  • Product Attributes:
    • Box Height: 4.500
    • Box Length: 9.125
    • Box Width: 5.500
    • Country of Origin: Cn
    • Number of Ports: 4
    • Primary Port Thread A: M10x1
    • Secondary Port Thread A: M10x1
    • Weight, Gross: 2.930
Brand: Raybestos
Additional Fitment Information:
Vehicle
1992 - Volkswagen Transporter