802.589.0911 Live Chat With Us

Finish Selecting Your Vehicle to Shop For Your Brake Master Cylinder

Choose a Year for your Infiniti 's Brake Master Cylinder

  • 2003
  • 2002
  • 2001
  • 2000
  • 1999
  • 1998
  • 1997

Shop By Brand

The Following brands are available based on your search.

  • Beck Arnley
    Beck Arnley
  • Cardone
    Cardone
  • Centric
    Centric
  • Dorman
    Dorman
  • Raybestos
    Raybestos
  • Wagner Brakes
    Wagner Brakes

Shop By Related Brake Master Cylinder Parts

Shop below for all Brake Master Cylinder related parts for your Infiniti


Shop for Top Selling Genuine Infiniti Qx4 Brake Master Cylinders

  • We Stock the following top leading brands, including Beck Arnley, Centric, Wagner Brakes, Cardone, Dorman, Raybestos
  • Constantly Updated Inventory of Infiniti Qx4 Replacement Brake Master Cylinder Parts

We also have Brake Master Cylinder parts for other Infiniti models, including EX35, EX37, FX35, FX37, FX45, FX50, G20, G25, G35, G37, I30, I35, J30, JX35, M30, M35, M37, M45, M56, Q40, Q45, Q60, Q70, Q70L, QX4, QX50, QX56, QX60, QX70.

Beck Arnley
2000 Infiniti QX4 Brake Master Cylinder Beck Arnley

P311-43F9E02    072-9209  New

Qty:
$94.00
Beck Arnley Brake Master Cylinder
  • BRAKE MASTER CYL
  • NEW
  • Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Brand: Beck Arnley
Additional Fitment Information:
Vehicle
2000 - Infiniti QX4
Beck Arnley
2003 Infiniti QX4 Brake Master Cylinder Beck Arnley

P311-2408FEE    072-9593  New

Qty:
$76.82
Beck Arnley Brake Master Cylinder
  • BRAKE MASTER CYL
  • NEW; Except Adaptive Cruise Control
  • Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Brand: Beck Arnley
Additional Fitment Information:
Vehicle
2003 - Infiniti QX4
Centric
2001 Infiniti QX4 Brake Master Cylinder Centric - C-TEK Standard Brake Master Cylinder

P311-27C9BA9    131.42316  New

Qty:
$94.00
Centric Brake Master Cylinder
  • C-Tek Standard Brake Master Cylinder
  • C-TEK Standard Brake Master Cylinder
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm
  • Centric Parts offers a full line of C-Tek standard replacement brake and clutch parts for import and domestic vehicles. C-Tek components provide exceptional quality and value. Utilizing world-wide manufacturing sources allows Centric Parts to provide the highest quality replacement parts while maintaining value.
Brand: Centric
Additional Fitment Information:
Vehicle Drive Type
2001 - Infiniti QX4 4WD
Centric
1999 Infiniti QX4 Brake Master Cylinder Centric - C-TEK Standard Brake Master Cylinder

P311-27C9BA9    131.42316  New

Qty:
$94.00
Centric Brake Master Cylinder
  • C-Tek Standard Brake Master Cylinder
  • To 12/99
  • C-TEK Standard Brake Master Cylinder
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm
  • Centric Parts offers a full line of C-Tek standard replacement brake and clutch parts for import and domestic vehicles. C-Tek components provide exceptional quality and value. Utilizing world-wide manufacturing sources allows Centric Parts to provide the highest quality replacement parts while maintaining value.
Brand: Centric
Additional Fitment Information:
Vehicle
1999 - Infiniti QX4
Centric
2000 Infiniti QX4 Brake Master Cylinder Centric - C-TEK Standard Brake Master Cylinder

P311-27C9BA9    131.42316  New

Qty:
$94.00
Centric Brake Master Cylinder
  • C-Tek Standard Brake Master Cylinder
  • Fr 1/00
  • C-TEK Standard Brake Master Cylinder
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm
  • Centric Parts offers a full line of C-Tek standard replacement brake and clutch parts for import and domestic vehicles. C-Tek components provide exceptional quality and value. Utilizing world-wide manufacturing sources allows Centric Parts to provide the highest quality replacement parts while maintaining value.
Brand: Centric
Additional Fitment Information:
Vehicle
2000 - Infiniti QX4
Wagner Brakes
2001 Infiniti QX4 Brake Master Cylinder Wagner Brakes

P311-41C8AD9    MC134560  New

130.42316 , M390342 , MC390342 , 460100W022 , 46010-0W002

Qty:
$120.10
Wagner Brakes Brake Master Cylinder
  • Brake Master Cylinder
  • 1" Bore Tokico Brake System
  • Product Attributes:
    • Master Cylinder Bore Diameter:
      • 1.0000
      • 25.4
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Port Quantity: 2
    • Primary Outlet Thread Diameter:
      • 0.3930
      • 10.0
    • Secondary Outlet Thread Diameter:
      • 0.3930
      • 10.0
  • Wagner® Brake hydraulics deliver improved OE-design products to the aftermarket giving you the capability to repair and improve a brake system with the finest products possible. Coverage for foreign, domestic, passenger car, light trucks, SUVs and vans.
Brand: Wagner Brakes
Additional Fitment Information:
Vehicle Drive Type
2001 - Infiniti QX4 4WD
Cardone
2001 Infiniti QX4 Brake Master Cylinder Cardone - New Master Cylinder

P311-32B932D    13-2764  New

460100W003

Qty:
$124.49
Cardone Brake Master Cylinder
  • ; Supplied w/Reservoir
  • New Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 1.000"
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Castings Feature A Premium Protective Coating To Minimize Corrosion And Extend Unit Life
      • Mounting Hardware And Bleeding Kits Are Supplied With Every Unit To Make The Installation And Bleeding Process Faster And Easier (where Applicable)
      • Only O.e.-quality Seals And Cups Are Used To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
      • Seals Are Temperature-cycled From -30°f To +220°f To Ensure Reliable Performance During Your Daily Commute
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Package Contents: Master Cylinder
    • Port Count: 2
    • Primary Port Size: M10 X 1.0
    • Product Condition: New
    • Reservoir Material: Plastic
    • Reservoir Type: Single
    • Secondary Port Size: M10 X 1.0
  • Building on decades of experience using reverse engineering to remanufacture brake products, CARDONE engineers have meticulously designed our CARDONE® New Master Cylinders to match O.E. performance. Supplied with new O.E.-quality seals and cups, each unit is endurance-tested to ensure perfect fit, function and reliable performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Drive Type
2001 - Infiniti QX4 RWD
Cardone
2001 Infiniti QX4 Brake Master Cylinder Cardone - New Master Cylinder

P311-3D333B7    13-2780  New

460100W022 , 460100W002

Qty:
$115.96
Cardone Brake Master Cylinder
  • ; Supplied w/Reservoir
  • New Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 1.000"
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Castings Feature A Premium Protective Coating To Minimize Corrosion And Extend Unit Life
      • Mounting Hardware And Bleeding Kits Are Supplied With Every Unit To Make The Installation And Bleeding Process Faster And Easier (where Applicable)
      • Only O.e.-quality Seals And Cups Are Used To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
      • Seals Are Temperature-cycled From -30°f To +220°f To Ensure Reliable Performance During Your Daily Commute
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Package Contents: Master Cylinder
    • Port Count: 2
    • Primary Port Size: M10 X 1.0
    • Product Condition: New
    • Reservoir Material: Plastic
    • Reservoir Type: Single
    • Secondary Port Size: M10 X 1.0
  • Building on decades of experience using reverse engineering to remanufacture brake products, CARDONE engineers have meticulously designed our CARDONE® New Master Cylinders to match O.E. performance. Supplied with new O.E.-quality seals and cups, each unit is endurance-tested to ensure perfect fit, function and reliable performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Drive Type
2001 - Infiniti QX4 4WD
Cardone
2002 Infiniti QX4 Brake Master Cylinder Cardone - New Master Cylinder

P311-22C05EF    13-3136  New

460105W610

Qty:
$122.17
Cardone Brake Master Cylinder
  • Except Adaptive Cruise Control; Supplied w/Reservoir
  • New Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 1.000"
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Castings Feature A Premium Protective Coating To Minimize Corrosion And Extend Unit Life
      • Mounting Hardware And Bleeding Kits Are Supplied With Every Unit To Make The Installation And Bleeding Process Faster And Easier (where Applicable)
      • Only O.e.-quality Seals And Cups Are Used To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
      • Seals Are Temperature-cycled From -30°f To +220°f To Ensure Reliable Performance During Your Daily Commute
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Package Contents: Master Cylinder
    • Port Count: 2
    • Primary Port Size: M10 X 1.0
    • Product Condition: New
    • Reservoir Material: Plastic
    • Reservoir Type: Single
    • Secondary Port Size: M10 X 1.0
  • Building on decades of experience using reverse engineering to remanufacture brake products, CARDONE engineers have meticulously designed our CARDONE® New Master Cylinders to match O.E. performance. Supplied with new O.E.-quality seals and cups, each unit is endurance-tested to ensure perfect fit, function and reliable performance.
Brand: Cardone
Additional Fitment Information:
Vehicle
2002 - Infiniti QX4
Cardone
2001 Infiniti QX4 Brake Master Cylinder Cardone - Reman. Master Cylinder

P311-43136EE    11-2764  Remanufactured

460100W003

Qty:
$17.10 $54.60
Cardone Brake Master Cylinder
  • Remanufactured Master Cylinder
  • ; Supplied w/o Reservoir
  • Reman. Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 1.000"
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Bleeding Kits Are Supplied With The Unit To Make The Bleeding Process Faster And Easier (where Applicable)
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Cast-iron Master Cylinders Feature A Premium Protective Coating To Minimize Rust And Extend Unit Life
      • Only New O.e.-quality Seals And Cups Are Used In The Remanufacturing Process To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Piston Assemblies Are Height-gauged To Ensure The Master Cylinder Equals The O.e. Unit Performance
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Package Contents: Master Cylinder
    • Port Count: 2
    • Primary Port Size: M10 X 1.0
    • Product Condition: Remanufactured
    • Secondary Port Size: M10 X 1.0
  • CARDONE® Remanufactured Master Cylinders are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-quality seals and cups to ensure leak-free, long-lasting performance. Cast-iron master cylinders are treated with a premium protective coating to minimize rust and extend product life. All units are 100% computer tested to ensure perfect fit and function.
Brand: Cardone
Additional Fitment Information:
Vehicle Drive Type
2001 - Infiniti QX4 RWD
Cardone
2001 Infiniti QX4 Brake Master Cylinder Cardone - Reman. Master Cylinder

P311-3AA7696    11-2780  Remanufactured

460100W022 , 460100W002

Qty:
$17.10 $59.54
Cardone Brake Master Cylinder
  • Remanufactured Master Cylinder
  • ; Supplied w/o Reservoir
  • Reman. Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 1.000"
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Bleeding Kits Are Supplied With The Unit To Make The Bleeding Process Faster And Easier (where Applicable)
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Cast-iron Master Cylinders Feature A Premium Protective Coating To Minimize Rust And Extend Unit Life
      • Only New O.e.-quality Seals And Cups Are Used In The Remanufacturing Process To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Piston Assemblies Are Height-gauged To Ensure The Master Cylinder Equals The O.e. Unit Performance
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Package Contents: Master Cylinder
    • Port Count: 2
    • Primary Port Size: M10 X 1.0
    • Product Condition: Remanufactured
    • Secondary Port Size: M10 X 1.0
  • CARDONE® Remanufactured Master Cylinders are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-quality seals and cups to ensure leak-free, long-lasting performance. Cast-iron master cylinders are treated with a premium protective coating to minimize rust and extend product life. All units are 100% computer tested to ensure perfect fit and function.
Brand: Cardone
Additional Fitment Information:
Vehicle Drive Type
2001 - Infiniti QX4 4WD
Cardone
2002 Infiniti QX4 Brake Master Cylinder Cardone - Reman. Master Cylinder

P311-587C260    11-3136  Remanufactured

460105W610

Qty:
$9.90 $86.23
Cardone Brake Master Cylinder
  • Remanufactured Master Cylinder
  • Except Adaptive Cruise Control; Supplied w/o Reservoir
  • Reman. Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 1.000"
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Bleeding Kits Are Supplied With The Unit To Make The Bleeding Process Faster And Easier (where Applicable)
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Cast-iron Master Cylinders Feature A Premium Protective Coating To Minimize Rust And Extend Unit Life
      • Only New O.e.-quality Seals And Cups Are Used In The Remanufacturing Process To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Piston Assemblies Are Height-gauged To Ensure The Master Cylinder Equals The O.e. Unit Performance
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Package Contents: Master Cylinder
    • Port Count: 2
    • Primary Port Size: M10 X 1.0
    • Product Condition: Remanufactured
    • Secondary Port Size: M10 X 1.0
  • CARDONE® Remanufactured Master Cylinders are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-quality seals and cups to ensure leak-free, long-lasting performance. Cast-iron master cylinders are treated with a premium protective coating to minimize rust and extend product life. All units are 100% computer tested to ensure perfect fit and function.
Brand: Cardone
Additional Fitment Information:
Vehicle
2002 - Infiniti QX4
Dorman
2001 Infiniti QX4 Brake Master Cylinder Dorman

P311-29C5B44    M390347  New

MC131962 , MC390347 , M-51317 , 11-2764 , F131962 , 130.42317 , 18M787 , MC510210 , 13-2764 , M901018 , 460100W003 , 072-9210 , NM55074 , M55074 , 13188 , 83-04317

Qty:
$131.08
Dorman Brake Master Cylinder
  • ; Bore: 1 In.
  • Product Attributes:
    • Bore Diameter: 1 In.
    • California Proposition 65: Warning: Cancer And Reproductive Harm ?Çô Www.p65warnings.ca.gov
    • Forward Outlet Size: M10 X 1.0
    • Material: Aluminum
    • Number of Outlets: 2
    • Package Contents: Master Cylinder
    • Rearward Outlet Size: M10 X 1.0
    • Thread Pitch: 1.0
Brand: Dorman
Additional Fitment Information:
Vehicle Drive Type
2001 - Infiniti QX4 RWD
Dorman
2003 Infiniti QX4 Brake Master Cylinder Dorman

P311-148B314    M630004  New

130.62324 , R135273 , 460105W600 , 130.42324 , 11-3498 , MC390775

Qty:
$97.08
Dorman Brake Master Cylinder
  • ; Bore: 1 In. w/Intelligent Cruise Control
  • Product Attributes:
    • Bore Diameter: 1 In.
    • California Proposition 65: Warning: Cancer And Reproductive Harm ?Çô Www.p65warnings.ca.gov
    • Forward Outlet Size: M10 X 1.0
    • Material: Aluminum
    • Number of Outlets: 3
    • Package Contents: Master Cylinder
    • Rearward Outlet Size: M10 X 1.0; M10 X 1.0
    • Thread Pitch: 1.0
Brand: Dorman
Additional Fitment Information:
Vehicle
2003 - Infiniti QX4
Dorman
2003 Infiniti QX4 Brake Master Cylinder Dorman

P311-4EC2EDD    M630099  New

MC141662 , 460105W610 , 13881 , F141682 , MC390342 , 13-3136 , MC390774 , 11-3136 , F141662 , M55167 , MC141682 , 130.42323

Qty:
$128.10
Dorman Brake Master Cylinder
  • ; Bore: 1 In. wo/Intelligent Cruise Control
  • Product Attributes:
    • Bore Diameter: 1 In.
    • California Proposition 65: Warning: Cancer And Reproductive Harm ?Çô Www.p65warnings.ca.gov
    • Forward Outlet Size: M10 X 1.0
    • Material: Aluminum
    • Number of Outlets: 2
    • Package Contents: Master Cylinder
    • Rearward Outlet Size: M10 X 1.0
    • Thread Pitch: 1.0
Brand: Dorman
Additional Fitment Information:
Vehicle
2003 - Infiniti QX4
Raybestos
2000 Infiniti QX4 Brake Master Cylinder Raybestos - Element3; New

P311-4B53FD3    MC390342  New

MC326 , 460100W022 , 130.42316 , 11-3567 , M390342 , 460100W002 , 83-04316 , MC134560 , M3331 , F134560 , NM52780 , 13-2780 , 11-2780 , CM2175 , 66-76-140 , MC503960 , M51316 , NM55075

Qty:
$128.39
Raybestos Brake Master Cylinder
  • Element3; New
  • Product Attributes:
    • Box Height: 5.875
    • Box Length: 8.125
    • Box Width: 5.875
    • Country of Origin: Tw
    • Number of Ports: 2
    • Primary Port Thread A: M10x1
    • Secondary Port Thread A: M10x1
    • Weight, Gross: 2.170
Brand: Raybestos
Additional Fitment Information:
Vehicle
2000 - Infiniti QX4
Raybestos
2001 Infiniti QX4 Brake Master Cylinder Raybestos - Element3; New

P311-42E79B6    MC390347  New

M3315 , 130.42317 , 13-2764 , CM2176 , 460100W003 , 11-2764 , MC510210 , 66-76-130 , 13188 , MC131962 , N0490 , NM55074 , F131962 , MC567 , M390347

Qty:
$164.85
Raybestos Brake Master Cylinder
  • Element3; New
  • Product Attributes:
    • Box Height: 5.875
    • Box Length: 8.125
    • Box Width: 5.875
    • Country of Origin: Cn
    • Number of Ports: 2
    • Primary Port Thread A: M10x1
    • Secondary Port Thread A: M10x1
    • Weight, Gross: 2.370
Brand: Raybestos
Additional Fitment Information:
Vehicle Drive Type
2001 - Infiniti QX4 RWD
Raybestos
2001 Infiniti QX4 Brake Master Cylinder Raybestos - Element3; New

P311-42FA967    MC390948  New

460103W420 , M390342

Qty:
$78.09
Raybestos Brake Master Cylinder
  • ; with Nabco Cylinder
  • Element3; New
  • Product Attributes:
    • Box Height: 5.875
    • Box Length: 8.125
    • Box Width: 5.875
    • Country of Origin: Tw
    • Number of Ports: 2
    • Primary Port Thread A: M10x1
    • Secondary Port Thread A: M10x1
    • Weight, Gross: 1.430
Brand: Raybestos
Additional Fitment Information:
Vehicle Drive Type
2001 - Infiniti QX4 4WD
Raybestos
2003 Infiniti QX4 Brake Master Cylinder Raybestos - Element3; New

P311-5D1EE0D    MC390774  New

M630099 , 460105W61A , 460105W610

Qty:
$70.32
Raybestos Brake Master Cylinder
  • ; Except Adaptive Cruise Control
  • Element3; New
  • Product Attributes:
    • Box Height: 4.500
    • Box Length: 9.125
    • Box Width: 5.500
    • Country of Origin: Tw
    • Primary Port Thread A: M10x1
    • Secondary Port Thread A: M10x1
    • Weight, Gross: 1.000
Brand: Raybestos
Additional Fitment Information:
Vehicle
2003 - Infiniti QX4
Raybestos
2003 Infiniti QX4 Brake Master Cylinder Raybestos - Element3; New

P311-46F15C1    MC390775  New

M630004 , 460105W600 , 11-3498 , 130.42324 , MCA630004 , NMC23183

Qty:
$78.09
Raybestos Brake Master Cylinder
  • ; Adaptive Cruise Control
  • Element3; New
  • Product Attributes:
    • Box Height: 5.875
    • Box Length: 8.125
    • Box Width: 5.875
    • Country of Origin: Tw
    • Primary Port Thread A: M10x1
    • Secondary Port Thread A: M10x1
    • Weight, Gross: 1.700
Brand: Raybestos
Additional Fitment Information:
Vehicle
2003 - Infiniti QX4