Finish Selecting Your Vehicle to Shop For Your Brake Master Cylinder

Choose a Year for your Geo Prizm 's Brake Master Cylinder

  • 1997
  • 1996
  • 1995
  • 1994
  • 1993
  • 1992
  • 1991
  • 1990
  • 1989

Shop By Brand

The Following brands are available based on your search.

  • Beck Arnley
    Beck Arnley
  • Cardone
    Cardone
  • Centric
    Centric
  • Dorman
    Dorman
  • Dynamic Friction
    Dynamic Friction
  • Raybestos
    Raybestos

Shop By Related Brake Master Cylinder Parts

Shop below for all Brake Master Cylinder related parts for your Geo Prizm


Shop for Top Selling Genuine Geo Prizm Brake Master Cylinders

  • We Stock the following top leading brands, including Beck Arnley, Centric, Dynamic Friction, Cardone
  • Constantly Updated Inventory of Geo Prizm Replacement Brake Master Cylinder Parts

We also have Brake Master Cylinder parts for other Geo models, including Metro, Prizm, Spectrum, Storm, Tracker.


Beck Arnley
1995 Geo Prizm Brake Master Cylinder Beck Arnley

P311-0520948    072-9001  New

Qty:
74.36
Beck Arnley Brake Master Cylinder
  • BRAKE MASTER CYL
  • NEW
  • Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Brand: Beck Arnley
Additional Fitment Information:
Vehicle BrakeABS
1995 - Geo Prizm 4-Wheel ABS
Beck Arnley
1996 Geo Prizm Brake Master Cylinder Beck Arnley

P311-1E29EA2    072-8918  New

Qty:
56.12
Beck Arnley Brake Master Cylinder
  • BRAKE MASTER CYL
  • ; NEW
  • APPLICATION SPECIFIC FOR THIS VEHICLE
  • Product Attributes:
    • ORDER MULTIPLE: 1
  • Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Brand: Beck Arnley
Additional Fitment Information:
Vehicle BrakeABS
1996 - Geo Prizm Non-ABS
Centric
1995 Geo Prizm Brake Master Cylinder Centric - C-TEK Standard Brake Master Cylinder

P311-4A0D626    131.44116  New

Qty:
78.65
Centric Brake Master Cylinder
  • C-Tek Standard Brake Master Cylinder
  • Reservoirs and caps included. Pressure tested for worry free performance. Wide application coverage.
  • C-TEK Standard Brake Master Cylinder
  • Product Attributes:
    • Attribute ID (Type): California Proposition 65
    • Push Rod Lgth / Depth: .692"
  • Centric Parts offers a full line of C-Tek standard replacement brake and clutch parts for import and domestic vehicles. C-Tek components provide exceptional quality and value. Utilizing world-wide manufacturing sources allows Centric Parts to provide the highest quality replacement parts while maintaining value.
Brand: Centric
Additional Fitment Information:
Vehicle BrakeABS
1995 - Geo Prizm Non-ABS
Centric
1991 Geo Prizm Brake Master Cylinder Centric - C-TEK Standard Brake Master Cylinder

P311-0A13344    131.44114  New

Qty:
54.98
Centric Brake Master Cylinder
  • C-Tek Standard Brake Master Cylinder
  • Reservoirs and caps included. Pressure tested for worry free performance. Wide application coverage.
  • C-TEK Standard Brake Master Cylinder
  • Product Attributes:
    • Attribute ID (Type): California Proposition 65
    • Push Rod Lgth / Depth: .703"
  • Centric Parts offers a full line of C-Tek standard replacement brake and clutch parts for import and domestic vehicles. C-Tek components provide exceptional quality and value. Utilizing world-wide manufacturing sources allows Centric Parts to provide the highest quality replacement parts while maintaining value.
Brand: Centric
Additional Fitment Information:
Vehicle Rear Brake
1991 - Geo Prizm Drum
Dynamic Friction
1993 Geo Prizm Brake Master Cylinder Dynamic Friction - DFC Brake Master Cylinder

P311-479AF47    355-76045  New

Qty:
75.45
Dynamic Friction Brake Master Cylinder
  • DFC Master Cylinder
  • DFC Brake Master Cylinder
Brand: Dynamic Friction
Additional Fitment Information:
Vehicle BrakeABS
1993 - Geo Prizm Non-ABS
Dynamic Friction
1993 Geo Prizm Brake Master Cylinder Dynamic Friction - DFC Brake Master Cylinder

P311-11B9C35    355-76046  New

Qty:
103.00
Dynamic Friction Brake Master Cylinder
  • DFC Master Cylinder
  • DFC Brake Master Cylinder
Brand: Dynamic Friction
Additional Fitment Information:
Vehicle BrakeABS
1993 - Geo Prizm 4-Wheel ABS
Dynamic Friction
1991 Geo Prizm Brake Master Cylinder Dynamic Friction - DFC Brake Master Cylinder

P311-3757D5E    355-76042  New

Qty:
93.90
Dynamic Friction Brake Master Cylinder
  • DFC Master Cylinder
  • DFC Brake Master Cylinder
Brand: Dynamic Friction
Additional Fitment Information:
Vehicle Rear Brake
1991 - Geo Prizm Disc
Cardone
1989 Geo Prizm Brake Master Cylinder Cardone - Brake Master Cylinder

P311-23FE93E    13-2236  New

4720112640 , 4720116140 , 94847509

Qty:
63.77
Cardone Brake Master Cylinder
  • Reservoir Included
  • Brake Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 0.812"
    • E-Waste: No
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Castings Feature A Premium Protective Coating To Minimize Corrosion And Extend Unit Life
      • Mounting Hardware And Bleeding Kits Are Supplied With Every Unit To Make The Installation And Bleeding Process Faster And Easier (where Applicable)
      • Only O.e.-quality Seals And Cups Are Used To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
      • Seals Are Temperature-cycled From -30°f To +220°f To Ensure Reliable Performance During Your Daily Commute
    • First Application Year: 1987
    • Installation Hardware Included: No
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Pedal Rod Included: No
    • Port Quantity: 2
    • Primary Port Size: M10 X 1.0
    • Product Condition: New
    • Reservoir Included: Yes
    • Reservoir Material: Plastic
    • Secondary Port Size: M10 X 1.0
  • Building on decades of experience using reverse engineering to remanufacture brake products, CARDONE engineers have meticulously designed our CARDONE® New Master Cylinders to match O.E. performance. Supplied with new O.E.-quality seals and cups, each unit is endurance-tested to ensure perfect fit, function and reliable performance.
Brand: Cardone
Additional Fitment Information:
Vehicle
1989 - Geo Prizm
Cardone
1990 Geo Prizm Brake Master Cylinder Cardone - Brake Master Cylinder

P311-19A39ED    13-2231  New

4720112580 , 4720120680 , 94847511

Qty:
53.63
Cardone Brake Master Cylinder
  • Reservoir Included
  • Brake Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 0.875"
    • E-Waste: No
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Castings Feature A Premium Protective Coating To Minimize Corrosion And Extend Unit Life
      • Mounting Hardware And Bleeding Kits Are Supplied With Every Unit To Make The Installation And Bleeding Process Faster And Easier (where Applicable)
      • Only O.e.-quality Seals And Cups Are Used To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
      • Seals Are Temperature-cycled From -30°f To +220°f To Ensure Reliable Performance During Your Daily Commute
    • First Application Year: 1988
    • Installation Hardware Included: No
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 3
    • Pedal Rod Included: No
    • Port Quantity: 2
    • Primary Port Size: M10 X 1.0
    • Product Condition: New
    • Reservoir Included: Yes
    • Reservoir Material: Plastic
    • Secondary Port Size: M10 X 1.0
  • Building on decades of experience using reverse engineering to remanufacture brake products, CARDONE engineers have meticulously designed our CARDONE® New Master Cylinders to match O.E. performance. Supplied with new O.E.-quality seals and cups, each unit is endurance-tested to ensure perfect fit, function and reliable performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Front Brake Rear Brake
1990 - Geo Prizm Disc Disc
Cardone
1995 Geo Prizm Brake Master Cylinder Cardone - Brake Master Cylinder

P311-39BD86B    13-2523  New

4720102110 , 4720112740 , 4720112830 , 472011A020 , 94853019 , 94857032

Qty:
59.20
Cardone Brake Master Cylinder
  • Reservoir Included
  • Brake Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 0.812"
    • E-Waste: No
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Castings Feature A Premium Protective Coating To Minimize Corrosion And Extend Unit Life
      • Mounting Hardware And Bleeding Kits Are Supplied With Every Unit To Make The Installation And Bleeding Process Faster And Easier (where Applicable)
      • Only O.e.-quality Seals And Cups Are Used To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
      • Seals Are Temperature-cycled From -30°f To +220°f To Ensure Reliable Performance During Your Daily Commute
    • First Application Year: 1990
    • Installation Hardware Included: No
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 3
    • Pedal Rod Included: No
    • Port Quantity: 2
    • Primary Port Size: M10 X 1.0
    • Product Condition: New
    • Reservoir Included: Yes
    • Reservoir Material: Plastic
    • Secondary Port Size: M10 X 1.0
  • Building on decades of experience using reverse engineering to remanufacture brake products, CARDONE engineers have meticulously designed our CARDONE® New Master Cylinders to match O.E. performance. Supplied with new O.E.-quality seals and cups, each unit is endurance-tested to ensure perfect fit, function and reliable performance.
Brand: Cardone
Additional Fitment Information:
Vehicle BrakeABS
1995 - Geo Prizm Non-ABS
Cardone
1995 Geo Prizm Brake Master Cylinder Cardone - Brake Master Cylinder

P311-0D403C5    11-2523  Remanufactured

4720102110 , 4720112740 , 4720112800 , 4720112830 , 472011A020 , 94849792 , 94851270 , 94853019 , 94857032

Qty:
$4.50 52.89
Cardone Brake Master Cylinder
  • Reservoir Not Included
  • Brake Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 0.812"
    • E-Waste: No
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Bleeding Kits Are Supplied With The Unit To Make The Bleeding Process Faster And Easier (where Applicable)
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Cast-iron Master Cylinders Feature A Premium Protective Coating To Minimize Rust And Extend Unit Life
      • Only New O.e.-quality Seals And Cups Are Used In The Remanufacturing Process To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Piston Assemblies Are Height-gauged To Ensure The Master Cylinder Equals The O.e. Unit Performance
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
    • First Application Year: 1990
    • Installation Hardware Included: No
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Port Quantity: 2
    • Primary Port Size: M10 X 1.0
    • Product Condition: Remanufactured
    • Reservoir Included: No
    • Secondary Port Size: M10 X 1.0
  • CARDONE® Remanufactured Master Cylinders are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-quality seals and cups to ensure leak-free, long-lasting performance. Cast-iron master cylinders are treated with a premium protective coating to minimize rust and extend product life. All units are 100% computer tested to ensure perfect fit and function.
Brand: Cardone
Additional Fitment Information:
Vehicle BrakeABS
1995 - Geo Prizm Non-ABS
Cardone
1989 Geo Prizm Brake Master Cylinder Cardone - Brake Master Cylinder

P311-14F9312    11-2236  Remanufactured

4720112640 , 4720116140 , 94847509

Qty:
$4.50 44.83
Cardone Brake Master Cylinder
  • Reservoir Not Included
  • Brake Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 0.812"
    • E-Waste: No
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Bleeding Kits Are Supplied With The Unit To Make The Bleeding Process Faster And Easier (where Applicable)
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Cast-iron Master Cylinders Feature A Premium Protective Coating To Minimize Rust And Extend Unit Life
      • Only New O.e.-quality Seals And Cups Are Used In The Remanufacturing Process To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Piston Assemblies Are Height-gauged To Ensure The Master Cylinder Equals The O.e. Unit Performance
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
    • First Application Year: 1987
    • Installation Hardware Included: No
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Port Quantity: 2
    • Primary Port Size: M10 X 1.0
    • Product Condition: Remanufactured
    • Reservoir Included: No
    • Secondary Port Size: M10 X 1.0
  • CARDONE® Remanufactured Master Cylinders are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-quality seals and cups to ensure leak-free, long-lasting performance. Cast-iron master cylinders are treated with a premium protective coating to minimize rust and extend product life. All units are 100% computer tested to ensure perfect fit and function.
Brand: Cardone
Additional Fitment Information:
Vehicle
1989 - Geo Prizm
Cardone
1990 Geo Prizm Brake Master Cylinder Cardone - Brake Master Cylinder

P311-14F9312    11-2236  Remanufactured

Qty:
$4.50 44.83
Cardone Brake Master Cylinder
  • To VIN # LZ090310 Reservoir Not Included
  • Brake Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 0.812"
    • E-Waste: No
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Bleeding Kits Are Supplied With The Unit To Make The Bleeding Process Faster And Easier (where Applicable)
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Cast-iron Master Cylinders Feature A Premium Protective Coating To Minimize Rust And Extend Unit Life
      • Only New O.e.-quality Seals And Cups Are Used In The Remanufacturing Process To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Piston Assemblies Are Height-gauged To Ensure The Master Cylinder Equals The O.e. Unit Performance
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
    • First Application Year: 1987
    • Installation Hardware Included: No
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Port Quantity: 2
    • Primary Port Size: M10 X 1.0
    • Product Condition: Remanufactured
    • Reservoir Included: No
    • Secondary Port Size: M10 X 1.0
  • CARDONE® Remanufactured Master Cylinders are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-quality seals and cups to ensure leak-free, long-lasting performance. Cast-iron master cylinders are treated with a premium protective coating to minimize rust and extend product life. All units are 100% computer tested to ensure perfect fit and function.
Brand: Cardone
Additional Fitment Information:
Vehicle Front Brake Rear Brake
1990 - Geo Prizm Disc Drum
Cardone
1990 Geo Prizm Brake Master Cylinder Cardone - Brake Master Cylinder

P311-0D403C5    11-2523  Remanufactured

Qty:
$4.50 52.89
Cardone Brake Master Cylinder
  • From VIN # LZ090311 Reservoir Not Included
  • Brake Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 0.812"
    • E-Waste: No
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Bleeding Kits Are Supplied With The Unit To Make The Bleeding Process Faster And Easier (where Applicable)
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Cast-iron Master Cylinders Feature A Premium Protective Coating To Minimize Rust And Extend Unit Life
      • Only New O.e.-quality Seals And Cups Are Used In The Remanufacturing Process To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Piston Assemblies Are Height-gauged To Ensure The Master Cylinder Equals The O.e. Unit Performance
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
    • First Application Year: 1990
    • Installation Hardware Included: No
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Port Quantity: 2
    • Primary Port Size: M10 X 1.0
    • Product Condition: Remanufactured
    • Reservoir Included: No
    • Secondary Port Size: M10 X 1.0
  • CARDONE® Remanufactured Master Cylinders are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-quality seals and cups to ensure leak-free, long-lasting performance. Cast-iron master cylinders are treated with a premium protective coating to minimize rust and extend product life. All units are 100% computer tested to ensure perfect fit and function.
Brand: Cardone
Additional Fitment Information:
Vehicle Front Brake Rear Brake
1990 - Geo Prizm Disc Drum
Cardone
1990 Geo Prizm Brake Master Cylinder Cardone - Brake Master Cylinder

P311-1298BFB    11-2231  Remanufactured

4720112580 , 4720120680 , 94847511

Qty:
$7.20 38.70
Cardone Brake Master Cylinder
  • Reservoir Not Included
  • Brake Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 0.875"
    • E-Waste: No
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Bleeding Kits Are Supplied With The Unit To Make The Bleeding Process Faster And Easier (where Applicable)
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Cast-iron Master Cylinders Feature A Premium Protective Coating To Minimize Rust And Extend Unit Life
      • Only New O.e.-quality Seals And Cups Are Used In The Remanufacturing Process To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Piston Assemblies Are Height-gauged To Ensure The Master Cylinder Equals The O.e. Unit Performance
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
    • First Application Year: 1988
    • Installation Hardware Included: No
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Port Quantity: 2
    • Primary Port Size: M10 X 1.0
    • Product Condition: Remanufactured
    • Reservoir Included: No
    • Secondary Port Size: M10 X 1.0
  • CARDONE® Remanufactured Master Cylinders are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-quality seals and cups to ensure leak-free, long-lasting performance. Cast-iron master cylinders are treated with a premium protective coating to minimize rust and extend product life. All units are 100% computer tested to ensure perfect fit and function.
Brand: Cardone
Additional Fitment Information:
Vehicle Front Brake Rear Brake
1990 - Geo Prizm Disc Disc
Centric
1995 Geo Prizm Brake Master Cylinder Centric - Premium Master Cylinder-Preferred

P311-03556F3    130.44117  New

Qty:
86.62
Centric Brake Master Cylinder
  • Centric Premium Brake Master Cylinder
  • Match O.E. parts in quality; configuration and fitment. Complete with reservoirs; switches and floats. Original aluminum casting body design where applicable. Manufactured under the highest quality standards by OEM and OES manufacturers
  • Premium Master Cylinder-Preferred
  • Product Attributes:
    • Attribute ID (Type): California Proposition 65
    • Cylinder Bore Dia in: 0.8750
    • Cylinder Bore Dia mm: 22.23
    • Port Quantity: 3
    • Push Rod Lgth / Depth: 0.686
  • The Centric Parts brake hydraulic program is the most complete and up-to-date in the industry and includes Brake Master and Wheel Cylinders; Brake Hoses; Caliper And Wheel Cylinder Repair Kits And Remanufactured Power Boosters. Centric Parts Brake Master Cylinders match original equipment parts in quality; configuration and fitment. Cylinders are complete with reservoirs; switches; and floats and are offered with the original aluminum casting body design where applicable.
Brand: Centric
Additional Fitment Information:
Vehicle BrakeABS
1995 - Geo Prizm 4-Wheel ABS
Centric
1992 Geo Prizm Brake Master Cylinder Centric - Premium Master Cylinder-Preferred

P311-4454F69    130.44114  New

Qty:
61.45
Centric Brake Master Cylinder
  • Centric Premium Brake Master Cylinder
  • Match O.E. parts in quality; configuration and fitment. Complete with reservoirs; switches and floats. Original aluminum casting body design where applicable. Manufactured under the highest quality standards by OEM and OES manufacturers
  • Premium Master Cylinder-Preferred
  • Product Attributes:
    • Attribute ID (Type): California Proposition 65
    • Cylinder Bore Dia in: 0.8125
    • Cylinder Bore Dia mm: 20.64
    • Port Quantity: 3
    • Push Rod Lgth / Depth: 0.703
  • The Centric Parts brake hydraulic program is the most complete and up-to-date in the industry and includes Brake Master and Wheel Cylinders; Brake Hoses; Caliper And Wheel Cylinder Repair Kits And Remanufactured Power Boosters. Centric Parts Brake Master Cylinders match original equipment parts in quality; configuration and fitment. Cylinders are complete with reservoirs; switches; and floats and are offered with the original aluminum casting body design where applicable.
Brand: Centric
Additional Fitment Information:
Vehicle Rear Brake
1992 - Geo Prizm Drum
Centric
1992 Geo Prizm Brake Master Cylinder Centric - Premium Master Cylinder-Preferred

P311-0B804CC    130.44113  New

Qty:
63.19
Centric Brake Master Cylinder
  • Centric Premium Brake Master Cylinder
  • Match O.E. parts in quality; configuration and fitment. Complete with reservoirs; switches and floats. Original aluminum casting body design where applicable. Manufactured under the highest quality standards by OEM and OES manufacturers
  • Premium Master Cylinder-Preferred
  • Product Attributes:
    • Attribute ID (Type): California Proposition 65
    • Cylinder Bore Dia in: 0.8750
    • Cylinder Bore Dia mm: 22.23
    • Port Quantity: 3
    • Push Rod Lgth / Depth: 0.695
  • The Centric Parts brake hydraulic program is the most complete and up-to-date in the industry and includes Brake Master and Wheel Cylinders; Brake Hoses; Caliper And Wheel Cylinder Repair Kits And Remanufactured Power Boosters. Centric Parts Brake Master Cylinders match original equipment parts in quality; configuration and fitment. Cylinders are complete with reservoirs; switches; and floats and are offered with the original aluminum casting body design where applicable.
Brand: Centric
Additional Fitment Information:
Vehicle Rear Brake
1992 - Geo Prizm Disc
Centric
1997 Geo Prizm Brake Master Cylinder Centric - Premium Master Cylinder-Preferred

P311-57E980C    130.44116  New

Qty:
77.33
Centric Brake Master Cylinder
  • Centric Premium Brake Master Cylinder
  • Match O.E. parts in quality; configuration and fitment. Complete with reservoirs; switches and floats. Original aluminum casting body design where applicable. Manufactured under the highest quality standards by OEM and OES manufacturers
  • Premium Master Cylinder-Preferred
  • Product Attributes:
    • Attribute ID (Type): California Proposition 65
    • Cylinder Bore Dia in: 0.8125
    • Cylinder Bore Dia mm: 20.64
    • Port Quantity: 4
    • Push Rod Lgth / Depth: 0.692
  • The Centric Parts brake hydraulic program is the most complete and up-to-date in the industry and includes Brake Master and Wheel Cylinders; Brake Hoses; Caliper And Wheel Cylinder Repair Kits And Remanufactured Power Boosters. Centric Parts Brake Master Cylinders match original equipment parts in quality; configuration and fitment. Cylinders are complete with reservoirs; switches; and floats and are offered with the original aluminum casting body design where applicable.
Brand: Centric
Additional Fitment Information:
Vehicle BrakeABS
1997 - Geo Prizm Non-ABS
Dynamic Friction
1989 Geo Prizm Brake Master Cylinder Dynamic Friction - DFC Brake Master Cylinder

P311-3757D5E    355-76042  New

Qty:
93.90
Dynamic Friction Brake Master Cylinder
  • DFC Master Cylinder
  • ; Rear Disc
  • DFC Brake Master Cylinder
Brand: Dynamic Friction
Additional Fitment Information:
Vehicle
1989 - Geo Prizm

Latest Car Advice

CarJunky AutoAdvice

93 Chysler Imperial 3.8/L - Brake Master Cylinder

Showing 11 out of 11 Posts
Question From Guest on 93 Chysler Imperial 3.8/L - Brake Master Cylinder

My car needs a new brake master cylinder, but it wasn't manufactured with a few of its standered parts (like the tranny filter, it used the 92 model), unfortunatly, the brake master cylinder is one of them. It's not from any previous chrysler model or year. The paper showing it only had '1200 - Brake Master Cylinder w/ ABS'. The mechanic that looked at it said it'd cost me more than I paid for the car. That won't work, I need to know what it is, where can I get one cheap, and how to remove it. I've supplied a picture of it.



I really need this car, and I can't use it without brakes. I'm really tight on a budget too. So if you know any sites that'll sell it cheap, let me know.

Response From Guest

One last question; Do you know where online I could find it? i've been searching for this thing for over weak and I can't find it. The part number has got me no where in finding it.

Response From Double J

This should be the system you have on your vehicle...

Click here

Response From Loren Champlain Sr

https://www.mycarquesthomepage.com/graphicImages/small/745946128066_AIO.jpgMFG Code: BPR
Part Number: 20-1983
DescriptionREMFG MSTR CYL

Specifications

Features & Benefits

  • Feature: 100% Computer tested. Benefit: Guaranteed performance every time
  • Feature: 100% Computer tested.. Benefit: Guaranteed performance every time.
  • Feature: 100% OE quality New Seals are installed on every unit. Benefit: OE performance and reliability
  • Feature: 100% OE quality New Seals are installed on every unit.. Benefit: OE performance and reliability.
  • Feature: Cast iron master cylinders come with premium phosphate coating . Benefit: Extends on-car and on-shelf life
  • Feature: Cast iron master cylinders come with premium phosphate coating.. Benefit: Extends on-car and on-shelf life.
  • MSDS Sheets- No MSDS sheet available Application Summary
  • CHRY FAM 95-87;DOD/PLY T 95-84
  • Product Bulletins- No bulletins available Interchange Numbers Type Brand Part Number Specification Documents- No specifications available When I went to look this up, there were no other choices. Obviously, this is a reman. unit which I wouldn't even sell (due to liabilities), and doesn't come with reservoir. Part number is from CarQuest.

    Response From Hammer Time

    That will not work on his car. He has an ABS accumulator.

    Response From Loren Champlain Sr

    Why would the accumulator have to be replaced? I wouldn't use a reman master, but I didn't read that he needed anything other than the master? sigh.

    Response From Hammer Time

    That's not what he has. On his car, the accumulator is the master, I believe.

    Response From Sidom Top Rated Answer

    Another one of Chrysler's brilliant ideas, right up there with the " Hey lets put the voltage regulator in the PCM " Come'on guys those NEVER go out, I can't see a downside to this, can you?

    Response From Guest

    Is there a way to retro fit a different MC? Or does it absolutly need to be the same MC?

    Response From Hammer Time

    It needs to be the same. the whole system was engineered around it.

    Response From Hammer Time

    That is the brake master that is combined with the accumulator for the ABS. I'm afraid your mechanic was right. This part can be very expensive if it's even still available.