Finish Selecting Your Vehicle to Shop For Your Brake Hose

Choose a Year for your Dodge 's Brake Hose

  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011
  • 2010
  • 2009
  • 2008
  • 2007
  • 2006
  • 2005
  • 2004
  • 2003
  • 2002
  • 2001
  • 2000
  • 1999
  • 1998
  • 1997
  • 1996
  • 1995
  • 1994
  • 1993
  • 1992
  • 1991
  • 1990
  • 1989
  • 1988
  • 1987
  • 1986
  • 1985
  • 1984
  • 1983
  • 1982
  • 1981
  • 1980
  • 1979
  • 1978
  • 1977
  • 1976
  • 1975
  • 1974
  • 1973
  • 1972
  • 1971
  • 1970
  • 1969
  • 1968
  • 1967
  • 1966
  • 1965
  • 1964
  • 1963
  • 1962
  • 1961
  • 1960
  • 1959
  • 1958
  • 1957
  • 1956
  • 1955
  • 1954
  • 1953
  • 1952
  • 1951
  • 1950
  • 1949
  • 1948
  • 1947
  • 1946
Show More Years

Shop By Brand

The Following brands are available based on your search.

  • Beck Arnley
    Beck Arnley
  • Centric
    Centric
  • Dorman
    Dorman
  • Febi
    Febi
  • Genuine
    Genuine
  • Mopar
    Mopar
  • PBR
    PBR
  • Wagner Brakes
    Wagner Brakes

Best Selling Genuine Dodge Brake Hoses

  • We Stock the following top leading brands, including Dorman, Genuine, PBR
  • Constantly Updated Inventory of Dodge Replacement Brake Hose Parts
Dorman
2004 Dodge Stratus Brake Hydraulic Hose Dorman

P311-0B3382E    W0133-1625281  New

Qty:
$17.40
Dorman Brake Hydraulic Hose
  • Front
Brand: Dorman
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
2004 - Dodge Stratus
Genuine
2004 Dodge Stratus Brake Hydraulic Hose Genuine

P311-13D150C    W0133-1625281  New

Qty:
$26.92
Genuine Brake Hydraulic Hose
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Front
Brand: Genuine
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
2004 - Dodge Stratus
Dorman
2005 Dodge Stratus Brake Hydraulic Hose Dorman

P311-0B3382E    W0133-1625281  New

Qty:
$17.40
Dorman Brake Hydraulic Hose
Brand: Dorman
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
2005 - Dodge Stratus
PBR
1985 Dodge Aries Brake Hydraulic Hose PBR

P311-3504148    W0133-1633911  New

Qty:
$8.85
PBR Brake Hydraulic Hose
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Front - Right
Brand: PBR
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
1985 - Dodge Aries
PBR
1985 Dodge Aries Brake Hydraulic Hose PBR

P311-4B7CCE2    W0133-1634030  New

Qty:
$8.63
PBR Brake Hydraulic Hose
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Front - Left
Brand: PBR
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
1985 - Dodge Aries
PBR
1991 Dodge Caravan Brake Hydraulic Hose PBR

P311-0A0DC44    W0133-1631463  New

Qty:
$8.60
PBR Brake Hydraulic Hose
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Front
Brand: PBR
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
1991 - Dodge Caravan
Dorman
1995 Dodge Stratus Brake Hydraulic Hose Dorman

P311-29B6206    W0133-1669097  New

Qty:
$15.45
Dorman Brake Hydraulic Hose
Brand: Dorman
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
1995 - Dodge Stratus
Dorman
2003 Dodge Caravan Brake Hydraulic Hose Dorman

P311-2E78D8A    W0133-1896037  New

Qty:
$25.51
Dorman Brake Hydraulic Hose
Brand: Dorman
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
2003 - Dodge Caravan
Dorman
2003 Dodge Caravan Brake Hydraulic Hose Dorman

P311-3DDB1A7    W0133-1896036  New

Qty:
$27.53
Dorman Brake Hydraulic Hose
Brand: Dorman
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
2003 - Dodge Caravan
Dorman
2012 Dodge Grand Caravan Brake Hydraulic Hose Dorman

P311-4185DB5    W0133-1966831  New

Qty:
$16.36
Dorman Brake Hydraulic Hose
Brand: Dorman
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
2012 - Dodge Grand Caravan
Dorman
2012 Dodge Grand Caravan Brake Hydraulic Hose Dorman

P311-0310562    W0133-1967397  New

Qty:
$16.24
Dorman Brake Hydraulic Hose
Brand: Dorman
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
2012 - Dodge Grand Caravan
Dorman
2002 Dodge Grand Caravan Brake Hydraulic Hose Dorman

P311-21D6165    W0133-1896035  New

Qty:
$44.64
Dorman Brake Hydraulic Hose
Brand: Dorman
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
2002 - Dodge Grand Caravan
Dorman
2002 Dodge Grand Caravan Brake Hydraulic Hose Dorman

P311-24D3E58    W0133-1896327  New

Qty:
$45.01
Dorman Brake Hydraulic Hose
Brand: Dorman
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
2002 - Dodge Grand Caravan
Dorman
2003 Dodge Grand Caravan Brake Hydraulic Hose Dorman

P311-426C2D7    W0133-1896328  New

Qty:
$46.20
Dorman Brake Hydraulic Hose
Brand: Dorman
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
2003 - Dodge Grand Caravan
Dorman
2003 Dodge Grand Caravan Brake Hydraulic Hose Dorman

P311-426C2D7    W0133-1896328  New

Qty:
$46.20
Dorman Brake Hydraulic Hose
  • FWD
Brand: Dorman
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
2003 - Dodge Grand Caravan
Dorman
2007 Dodge Caravan Brake Hydraulic Hose Dorman

P311-426C2D7    W0133-1896328  New

Qty:
$46.20
Dorman Brake Hydraulic Hose
  • Exc.Commercial Chassis
Brand: Dorman
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
2007 - Dodge Caravan
Dorman
2006 Dodge Grand Caravan Brake Hydraulic Hose Dorman

P311-2DE5D69    W0133-1876026  New

Qty:
$47.73
Dorman Brake Hydraulic Hose
  • with Floor Storage with Fold Away Seats
Brand: Dorman
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
2006 - Dodge Grand Caravan
Dorman
2007 Dodge Grand Caravan Brake Hydraulic Hose Dorman

P311-2DE5D69    W0133-1876026  New

Qty:
$47.73
Dorman Brake Hydraulic Hose
Brand: Dorman
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
2007 - Dodge Grand Caravan
PBR
1998 Dodge Intrepid Brake Hydraulic Hose PBR

P311-29B92F8    W0133-1676081  New

Qty:
$10.28
PBR Brake Hydraulic Hose
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Front - Left
Brand: PBR
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
1998 - Dodge Intrepid
Dorman
2005 Dodge Magnum Brake Hydraulic Hose Dorman

P311-01FC2AB    W0133-1900791  New

Qty:
$21.37
Dorman Brake Hydraulic Hose
  • Engine - EER
Brand: Dorman
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
2005 - Dodge Magnum

Latest Dodge Repair and Brake Hose Installation Advice

CarJunky AutoAdvice

New caliper leaks at screw from brake hose.

Showing 5 out of 5 Posts
Question From reelfisher10 on New caliper leaks at screw from brake hose.

Just got a remanufactured brake caliper on my 01 dodge ram 1500 4x4 and when I hook it up to the brake line it leaks when I pump the breaks. Leaks right underneath that square nut thing that has the screw go through it which holds the break line to the caliper. Is there suppose to be some kind of special seal there because there wasn't one there when I took it off.

Response From Double J Top Rated Answer

It has to have a copper washer on both sides of "that square nut thing "..
It had to have one when you took it off or else it wouldve been leaking...It either fell off or its stuck on the square nut part of the hose or stuck to the old caliper.
They are NOT reuseable...get new ones....Make sure you put one on each side of the square nut thing...also make sure you removed the old ones.

The reman caliper shouldve came with them....They Usually come with all the necessary hardware including the copper washers ,but not the banjo bolt.(Screw as you call it)

Response From reelfisher10

And the two bolts that go through the caliper to the caliper bracket, get flat and locking washers?

Response From MarineGrunt

I've personally never seen lock washers on the caliper pins on any vehicle I've ever done a brake job to but I think I remember seeing somewhere that some vehicles such as Toyota use lock washers. I could be wrong though. I've never seen them on any GM vehicle. If yours didn't have them when you took them off I wouldn't be putting any back on. Try and find a diagram on the brake system on Dodge's part website and see what it shows. I'm sure the mechanics here can give you a definite answer though.

Response From Tom Greenleaf

These should be standard fare out there. Solid copper and the seal is the grooves which will impregnate/squish the copper some both seal and lock it. That's why they say never re-use them. Never saw one intentionally to be also a lock washer but some method may be out there for that.

Back a few posts - they should have come with them! Pic may not show but just like this if it does...........



T

brake problems dodge stratus

Showing 2 out of 3 Posts | Show 1 Hidden Posts
Question From Guest on brake problems dodge stratus

I have a 2000 Dodge Stratus, and we have replaced the back right brake pads 4 times in 2 months, we have also replaced just about every part on it. They keep sticking and now, the last set only lasted a week, it chrystalized the pads....help....we don't know what else could be wrong...

Response From Guest Top Rated Answer

definately replace rubber brake hoses on both sides, I had same problem with my 97 stratus. Changed hoses=no more problem. The rubber deteriorates and swells and constricts the flow of fluid back which has no pressure to push it and your shoes stay against the drums and superheat and all that good stuff. changed brakes 6 times before discovering it.

Response From Tom Greenleaf

If it's selecting one brake to wear out because of sticking the problem should lie with perhaps (varies by design) parking brake, caliper frozen or slides sticky, and unseen to the eye is the rubber flex hose that can allow pressure to the brake but doesn't realease it well or at all in some cases. To test for that with the wheel off ground and demonstrating being sticky, just open the bleeder just a touch to let just some fluid out but not air back in of course and if the wheel/brake frees up the hose is highly suspect. If you find that I would replace both sides,

T

Dodge caravan can't remove axle

Showing 2 out of 3 Posts | Show 1 Hidden Posts
Question From 3fingerrick on Dodge caravan can't remove axle

I am trying to remove the axle from the steering knuckle and I can't turn the knuckle far enough to remove the axle eventhough I have removed the ball joint. Do I have to pull the bottom ball joint as well and is there pressure on that joint from the front spring? Chilton's book does not tel me. I am trying to remove the engine and need to remove the axles to pull the transmission with the engine.

Dodge Grand Caravan
2003
3.8L v6
135K

Response From Sidom

Lorens right, you can lose 2 fingers doing that way.......lol There is alot of pressure require to pull the lower con arm down far enough to get the stud out of the knuckle (easy part) and then to put it back in ( hard part).
.
.
Another way would be to remove the 2 strut bolts & let the knuckle fall forward. The con to doing that way would be you would have to get an alignment afterwards

Response From Loren Champlain Sr Top Rated Answer

rick; Hope you didn't lose two fingers while you were doing this. Yes, seperate the lower ball joint. You'll need to remove the brake caliper and support it, first. (don't let it hang by the brake hose)

01 Ram brakes overheating

Showing 4 out of 10 Posts | Show 6 Hidden Posts
Question From Guest on 01 Ram brakes overheating

2001 Dodge Ram 1500 with 158,000 miles, the front left brake has been overheating. I have replaced the pads ,rotor, caliper and brake hose. Im still having problems especially during stop and go driving. When they get hot they start slipping. someone told me maybe the proportioning valve is bad. I would like to know if it could be anything else before I replace it.

Response From Hammer Time Top Rated Answer

Did you replace all those parts on BOTH sides of the truck?

Are you getting any pulling either on or off the brakes?

Are the slide pins moving freely?

Response From brianarendts

I only replaced those parts on the drivers side, it was pulling to the right before i replaced the caliper. now it is just overheating just on the drivers side, almost to the point of brake failure. I need some help on this one. I use this truck for work and family. I also live and work in the city so it is crucial that I get this fixed as soon as possible. If anyone has any idea of what could be wrong I would like to hear your feedback.


thank you

Response From Hammer Time

You can't expect equal braking when only changing parts on one side of the truck. I'm not saying that's your problem but it definitely wasn't repaired correctly.

Response From Guest

why was it overhetin before I replaced everything

Response From Sidom

On that system I would probably be looking for signs of contamination (swollen or disformed rubber gasket on the master cap, brk fluid that looked thick or just not right) if any type of petroleum product got in there, that wouldn't be good.

If that checked out I would bleed the whole system, make sure you are getting fluid to the rears. The frts do the highest percentage of the brking but if the rears stop that would definately start overheating the frts............

Response From Guest

I replaced the master cylinder and did a full flush, now both fronts
are getting very hot. maybe proporting valve could be tripped? how do
I fix? is that the problem

Response From Hammer Time

It sounds like you may have had a contamination problem. Merely flushing won't resolve that. Every piece of rubber will swell and have to be replaced.

Response From Tom Greenleaf

To add: Sometimes brake will pull to better side after one gets hot/too hot called brake fade. As Hammer said it wasn't done right and if both weren't done or non brake fluid ever used it would cause problems especially after bleeding if only bleeding one side if that's what happened.

When someone mistakes an oil to top off master cylinder's reservoir the oil should stay on top. If there was any question you quickly remove all fluid from reservoir.

Now that both are hot is suggests to me the master cylinder has an issue or allowing fluid return OR once I installed a new master that was defective at returning fluid - fine cool and at 6-8 miles brakes applied themselves from expansion of fluid from using brakes or even engine heat near lines. Drove the car myself using parking brake and it did it to me without touching regular brakes.

Rubber will not tolerate oils in a brake systems ever TMK,

T

Response From Hammer Time

I wouldn't even begin to guess knowing the brakes were only done on one side of the truck. The timing alone points to an installation error but the problem could have been misdiagnosed from the beginning.

1996 Dodge Caravan: Front brakes not releasing fluid pressure

Showing 2 out of 2 Posts
Question From james2011 on 1996 Dodge Caravan: Front brakes not releasing fluid pressure

I changed the calibers and the front brake hoses; after test driving and hitting the brakes a couple of times, the front brakes stayed engaged, heated up, and locked up.

I then released the pressure by opening the brake bleeder, and test drove; however, the front brakes locked up again.

What could have caused this problem? Could it be the master cylinder and booster? Or ABS system?

Thank you very much.

Response From Hammer Time Top Rated Answer

If opening one bleeder released both wheels, then the master cylinder is highly suspect but first make sure that the push rod has just a little play in it because if it doesn't the master will not release and will build up pressure.