| From | Message |
susie
Guest
3/02/2005
22:26:16
|
 Subject: 92 jeep cherokee
IP: Logged
Message:
my Jeep has a hydraulic clutch. It's acting up. The fluid is up. It will sometimes not engage so I can't put it in 1st or can't get it out of 1st (same as for reverse) It seems fine in the other gears. It also works for a while if I pump it 1/2 way a few times before trying to put it into gear. It's like it's not getting the pressure or the fluid.
Any suggestions on what I can bring to the garage?
Thanks greatly appriciated
Susie
|
Tom Greenleaf
Guest
3/03/2005
06:33:14
| RE: 92 jeep cherokee
IP: Logged
Message:
Hydraulics for clutch involves a Master and Slave Cylinder. Probably a fault in either. If fluid is low the leak needs fixing and filling it can make it work to get you going. Usually DOT 3 Brake fluid and should say so on the cap where you put it in. Good luck with the fix, Tom Greenleaf
|
susie
Guest
3/03/2005
10:55:00
| RE: 92 jeep cherokee
IP: Logged
Message:
Thanks Tom for your prompt reply. Muchly appriciated
|
susie
Guest
3/04/2005
19:50:47
| RE: 92 jeep cherokee
IP: Logged
Message:
Hello! again Tom
If I were to chance changing ither cylinder. Which one would it most likely be?
|
Rick
Guest
4/14/2005
10:12:41
| RE: 92 jeep cherokee
IP: Logged
Message:
I am going to be buying a 92 Jeep Cherokee, Are there any problems with them that I should be made aware of before I complete the purchase.
|
